diff options
Diffstat (limited to 'keyboards/handwired/tractyl_manuform/5x6_right/f303')
7 files changed, 244 insertions, 0 deletions
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h new file mode 100644 index 0000000000..f9a44587b0 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h @@ -0,0 +1,104 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#define PRODUCT Tractyl Manuform(5x6) Proton C + +// wiring of each half +#define MATRIX_COL_PINS \ + { B0, B1, B2, B3, B4, B5 } +#define MATRIX_ROW_PINS \ + { B10, B11, B12, A14, A13, A15 } + +#define UNUSED_PINS \ + { A0, A2, A7, A8 } +// B2 used for BOOT1, has internal pull down? +// A9 has internal pull-down +// A11 and A12 are used for USB sense. DO NOT USE. + +#define DIODE_DIRECTION COL2ROW + +// #define USB_VBUS_PIN B10 +#define SPLIT_HAND_PIN C14 // high = left, low = right + +// WS2812 RGB LED strip input and number of LEDs +#define RGB_DI_PIN A6 +#define WS2812_PWM_DRIVER PWMD3 // default: PWMD2 +#define WS2812_PWM_CHANNEL 1 // default: 2 +#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). +// #define WS2812_DMA_STREAM STM32_DMA1_STREAM3 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. + +#define RGBLED_NUM 20 +#define RGBLIGHT_SPLIT +#define RGBLED_SPLIT \ + { 10, 10 } + +#define DEBUG_LED_PIN C13 + +/* Audio config */ +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE + +/* serial.c configuration for split keyboard */ +#define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. +#define SERIAL_USART_TX_PIN A9 +#define SERIAL_USART_RX_PIN A10 +#define SERIAL_USART_DRIVER SD1 +#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 + +/* i2c config for oleds */ +#define I2C_DRIVER I2CD1 +#define I2C1_SCL_PIN B6 +#define I2C1_SDA_PIN B7 +#define I2C1_SCL_PAL_MODE 4 +#define I2C1_SDA_PAL_MODE 4 +#define I2C1_CLOCK_SPEED 400000 + +/* encoder config */ +#define ENCODERS_PAD_A \ + { A7 } +#define ENCODERS_PAD_B \ + { A8 } + +/* spi config for eeprom and pmw3360 sensor */ +#define SPI_DRIVER SPID2 +#define SPI_SCK_PIN B13 +#define SPI_SCK_PAL_MODE 5 +#define SPI_MOSI_PIN B15 +#define SPI_MOSI_PAL_MODE 5 +#define SPI_MISO_PIN B14 +#define SPI_MISO_PAL_MODE 5 + +/* eeprom config */ +#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN B8 +#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 +// #define EXTERNAL_EEPROM_BYTE_COUNT 8196 +// #define EXTERNAL_EEPROM_PAGE_SIZE 32 +// #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 +// #define DEBUG_EEPROM_OUTPUT + +/* pmw3360 config */ +#define PMW3360_CS_PIN B9 +#define PMW3360_SPI_MODE 3 +#define PMW3360_SPI_DIVISOR 8 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.c b/keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.c new file mode 100644 index 0000000000..d094801938 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.c @@ -0,0 +1,17 @@ +/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "f303.h" diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.h b/keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.h new file mode 100644 index 0000000000..525b0378b4 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.h @@ -0,0 +1,19 @@ +/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "5x6_right.h" diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/halconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f303/halconf.h new file mode 100644 index 0000000000..62f56e4d2b --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/halconf.h @@ -0,0 +1,27 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#define HAL_USE_PWM TRUE +#define HAL_USE_SERIAL TRUE +#define HAL_USE_I2C TRUE +#define HAL_USE_SPI TRUE +#define HAL_USE_GPT TRUE +#define HAL_USE_DAC TRUE +#define SPI_USE_WAIT TRUE +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD + +#include_next <halconf.h> diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/mcuconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f303/mcuconf.h new file mode 100644 index 0000000000..5525a077d2 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/mcuconf.h @@ -0,0 +1,40 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ + +#pragma once + +#include_next "mcuconf.h" + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE + +#undef STM32_SERIAL_USE_USART1 +#define STM32_SERIAL_USE_USART1 TRUE + +#undef STM32_DAC_USE_DAC1_CH1 +#define STM32_DAC_USE_DAC1_CH1 TRUE + +#undef STM32_DAC_USE_DAC1_CH2 +#define STM32_DAC_USE_DAC1_CH2 TRUE + +#undef STM32_GPT_USE_TIM6 +#define STM32_GPT_USE_TIM6 TRUE + +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f303/readme.md new file mode 100644 index 0000000000..79a4a8ca0e --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/readme.md @@ -0,0 +1,24 @@ +# Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball + + +* Split Hand Pin, using PC14 +* Full Duplex Serial/USART using PA9 and PA10 on USART1 +* DAC Audio using PA4 and PA5 +* PWM RGB using PA6 TIM3 +* pmw3360 sensor using PA5-PA7 on SPI2, with B as CS pin +* 8KB SPI EEPROM chip sharing PB13-PB15 on SPI1 with PB9 as CS pin +* Encoder using PA7 and PA8 +* SSD1306 OLED display (128x64) using PB6 and PB7 on I2C1 + +* Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna) +* Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/) + +Make example for this keyboard (after setting up your build environment): + + make handwired/tractyl_manuform/5x6_right/f411:default + +Flashing example for this keyboard: + + make handwired/tractyl_manuform/5x6_right/f411:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/f303/rules.mk new file mode 100644 index 0000000000..622d22704d --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/rules.mk @@ -0,0 +1,13 @@ +# MCU name +MCU = STM32F303 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# KEYBOARD_SHARED_EP = yes +CONSOLE_ENABLE = yes + +EEPROM_DRIVER = spi +WS2812_DRIVER = pwm +SERIAL_DRIVER = usart +AUDIO_DRIVER = dac_additive |