summaryrefslogtreecommitdiffstats
path: root/keyboards/handwired/sono1/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired/sono1/readme.md')
-rw-r--r--keyboards/handwired/sono1/readme.md32
1 files changed, 28 insertions, 4 deletions
diff --git a/keyboards/handwired/sono1/readme.md b/keyboards/handwired/sono1/readme.md
index e21d06e2d9..76541e118b 100644
--- a/keyboards/handwired/sono1/readme.md
+++ b/keyboards/handwired/sono1/readme.md
@@ -5,11 +5,11 @@
ASkeyboard Sono1 keyboard conversion project: direct connection of Black Pill to the matrix.
* Keyboard Maintainer: [DmNosachev](https://github.com/DmNosachev)
-* Hardware Supported: [ASkeyboard Sono1](http://www5f.biglobe.ne.jp/~silencium/keyboard/html/alps.html), Black Pill STM32F103C8T6 MCU board. Alternatively you can use any MCU which is supported by QMK and has 28 IO pins or more (15x8 matrix and 5 LEDs): Teensy 2.0++, Blue Pill, etc.
+* Hardware Supported: [ASkeyboard Sono1](http://www5f.biglobe.ne.jp/~silencium/keyboard/html/alps.html), Teensy 2.0++ or Black Pill STM32F103C8T6 MCU board. Alternatively you can use any MCU which is supported by QMK and has 28 IO pins or more (15x8 matrix and 5 LEDs): Blue Pill, Black Pill STM32F4xx, etc.
Make example for this keyboard (after setting up your build environment):
- make handwired/sono1:default
+ qmk compile -kb handwired/sono1:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
@@ -22,11 +22,34 @@ ASkeyboard Sono1 has 15x8 matrix. Sono2 numpad connects directly to the main mat
Rows (R0-RE) and columns (R0-C7):
![Sono1 rows and columns](https://i.imgur.com/5Owazg6h.jpeg)
+Desolder all ICs, capacitors and resistors except R10–R14.
+
## LEDs
Keyboard has 5 LEDs with common anode. Their cathodes are connected to R10–R14 resistors (you may want to replace them to adjust LED brightness for 3.3V voltage). Add 5 wire jumpers to connect them to the corresponding traces.
![Sono1 LEDs](https://i.imgur.com/opxc2A3h.jpeg)
+## Teensy 2.0++
+Suggested mount position for the Teensy 2.0++ (view from the bottom side of the PCB):
+```
+ R8 R9 RA RB RC RD RE L0 R8 C7 C6 C5 C4 C3 C2 C1 C0
+ * | | | | | | | * | | | | | | | |
+ ,------------------------------------------------------------,
+,---|GN B7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 C0 C1 C2 C3 C4 C5 C6 C7 |
+| |D7 |
+|USB| |
+| |GN |
+'---|V B6 B5 B4 B3 B2 B1 B0 E7 E6 G A F0 F1 F2 F3 F4 F5 F6 F7 |
+ `------------------------------------------------------------'
+ * | | | | | | | | | | | |
+ GN L2 L1 L3 L4 R7 R6 R5 R4 R3 R2 R1 R0
+```
+Asterisk sign designates pins of the Teensy that don't align properly with PCB and need to be rewired.
+
+1. Compile and flash the firmware: `qmk compile -kb handwired/sono1/t2pp:default:flash`. Press the reset button on Teensy to launch the bootloader.
+2. You will need to solder several pin headers to Teensy: two 7 pin headers (C0–C7, D5–B7), 8 pin (F0–F7) and 4 pin (B1—B4).
+3. Solder the Teensy to keyboard's PCB. You will need to manually reroute only 3 pins.
+
## Black Pill
Suggested mount position for the Black Pill (view from the bottom side of the PCB):
@@ -47,11 +70,12 @@ Asterisk sign designates pins of the Black Pill that don't align properly with P
![Black Pill](https://i.imgur.com/KQjTWVbh.jpeg)
-1. Desolder all ICs, capacitors and resistors except R10–R14.
1. Solder 4-pin SWD header to Black Pill.
2. Burn [STM32duino bootloader](https://github.com/rogerclarkmelbourne/STM32duino-bootloader/blob/master/bootloader_only_binaries/generic_boot20_pb12.bin) to Black Pill.
-3. Compile and flash the firmware: `make handwired/sono1:default:flash`
+3. Compile and flash the firmware: `qmk compile -kb handwired/sono1/stm32f103:default:flash`
4. Connect rows, columns and LED pads to the corresponding pins of the Black Pill.
## Keymap
'CUR LOCK' key on Sono2 numpad has locking switch by default (Alps SKCL lock). QMK [supports mechanical locking switches](https://docs.qmk.fm/#/faq_keymap?id=mechanical-lock-switch-support) for CapsLock, NumLock and ScrollLock keycodes.
+
+There is 'debug' keymap which doesn't output any scancodes, but displays row and column numbers of pressed buttons to console (hid_listen or QMK Toolbox).