diff options
Diffstat (limited to 'keyboards/handwired/3dp660_oled/readme.md')
| -rw-r--r-- | keyboards/handwired/3dp660_oled/readme.md | 28 |
1 files changed, 28 insertions, 0 deletions
diff --git a/keyboards/handwired/3dp660_oled/readme.md b/keyboards/handwired/3dp660_oled/readme.md new file mode 100644 index 0000000000..408fa4770a --- /dev/null +++ b/keyboards/handwired/3dp660_oled/readme.md @@ -0,0 +1,28 @@ +# handwired/3dp660_oled + + + +*A handwired FC660 layout with OLED display support.* + +* Keyboard Maintainer: [xia0](https://github.com/xia0) +* Hardware Supported: ATmega32U4 e.g. Arduino Pro Micro or Teensy 2.0 + * Note: If using a Pro Micro, pins B0 and D5 are required. [Click for details](https://golem.hu/guide/pro-micro-upgrade/). +* Hardware Availability: [Printables](https://www.printables.com/model/464322-3dp-fc660-v3-oled-hand-wired-mechanical-keyboard) + +Make example for this keyboard (after setting up your build environment): + + make handwired/3dp660_oled:default + +Flashing example for this keyboard: + + make handwired/3dp660_oled:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the MCU or short RST to GND. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |