summaryrefslogtreecommitdiffstats
path: root/keyboards/handwired/3dfoxc/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired/3dfoxc/readme.md')
-rw-r--r--keyboards/handwired/3dfoxc/readme.md42
1 files changed, 42 insertions, 0 deletions
diff --git a/keyboards/handwired/3dfoxc/readme.md b/keyboards/handwired/3dfoxc/readme.md
new file mode 100644
index 0000000000..3d6e33a5c1
--- /dev/null
+++ b/keyboards/handwired/3dfoxc/readme.md
@@ -0,0 +1,42 @@
+# 3dfoxc
+
+![3dfoxc](https://cdn.thingiverse.com/assets/12/3a/3e/5f/47/64A223C2-57E8-4124-B6AB-3031A0BA7973.jpeg)
+
+A [3d-printed whitefox](https://www.thingiverse.com/thing:2952008) with an Elite-C microcontroller.
+
+This is a build of [matt3o's "How to Build a Custom Keyboard" guide](https://matt3o.com/book/), except that I have replaced the Teensy with an [Elite-C v4](https://keeb.io/products/elite-c-low-profile-version-usb-c-pro-micro-replacement-atmega32u4). Presumably you could replace it with anything compatible. The USB-C port had to be enlarged with dremel, and the mount for the Teensy was ground off and replaced with everyone's favorite rapid modeling polymer ... hot glue.
+
+* Keyboard Maintainer: [david l goodrich](mailto:dlg@dsrw.org)
+* Hardware Supported:
+ * [3d-printed whitefox](https://www.thingiverse.com/thing:2952008)
+ * Elite-C microcontroller
+* Hardware Availability: [keebio](https://keeb.io/products/elite-c-low-profile-version-usb-c-pro-micro-replacement-atmega32u4), [1up](https://1upkeyboards.com/shop/controllers/elite-c-v4-controller/), [keyhive](https://keyhive.xyz/shop/elite-c), [splitkb](https://splitkb.com/products/elite-c-low-profile-rev4-microcontroller)
+
+## Wiring
+
+Badly, because I have never done this before. Build pics available upon request, I guess.
+
+![wiring diagram](https://user-images.githubusercontent.com/6492494/148123622-36cae91e-97f3-40f7-a6fc-4d59b1a3ef02.png)
+
+
+## Flashing
+
+Make example for this keyboard (after setting up your build environment):
+
+ make handwired/3dfoxc:default
+
+Flashing example for this keyboard (use the `dfu` target for the Elite-C!):
+
+ make handwired/3dfoxc:default:dfu
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+