diff options
Diffstat (limited to 'keyboards/foxlab')
8 files changed, 125 insertions, 100 deletions
diff --git a/keyboards/foxlab/leaf60/hotswap/rules.mk b/keyboards/foxlab/leaf60/hotswap/rules.mk index 75ee00a1a9..6c1ec4525c 100644 --- a/keyboards/foxlab/leaf60/hotswap/rules.mk +++ b/keyboards/foxlab/leaf60/hotswap/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/foxlab/leaf60/universal/keymaps/jarred/keymap.c b/keyboards/foxlab/leaf60/universal/keymaps/jarred/keymap.c new file mode 100644 index 0000000000..5590ff8416 --- /dev/null +++ b/keyboards/foxlab/leaf60/universal/keymaps/jarred/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2019 Jarred Steenvoorden + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H +#include "jarred.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QW] = LAYOUT_60_hhkb( + KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_BSLS, KC_GRV , + KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, KC_BSPC, + NAVI , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, KC_ENT , + KC_LSFT , KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_ENT , + KC_LCTL, KC_LGUI, KC_SPC , KC_RALT, KC_RCTL + ), + + [_NV] = LAYOUT_60_hhkb( + KC_GRV , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, + _______, _______, _______, _______, KC_DEL , KC_BSPC, _______, KC_HOME, KC_UP , KC_END , KC_INS , _______, _______, _______, + _______, _______, _______, KC_LSFT, KC_LCTL, KC_ENT , _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_DEL , KC_DEL , _______, + _______ , _______, _______, _______, _______, _______, _______, KC_PGUP, KC_PGDN, _______, _______, _______, _______, + _______, _______, ALT_TAB , _______, RESET + ), + +}; diff --git a/keyboards/foxlab/leaf60/universal/keymaps/jarred/readme.md b/keyboards/foxlab/leaf60/universal/keymaps/jarred/readme.md new file mode 100644 index 0000000000..6b0a57a1e6 --- /dev/null +++ b/keyboards/foxlab/leaf60/universal/keymaps/jarred/readme.md @@ -0,0 +1,9 @@ +# Jarred's Leaf60 Layout + +Check out [user space readme](../../../../../../users/jarred/readme.md) for more info + +# Flash + +``` +make foxlab/leaf60/universal:jarred:dfu +``` diff --git a/keyboards/foxlab/leaf60/universal/keymaps/mguterl/config.h b/keyboards/foxlab/leaf60/universal/keymaps/mguterl/config.h new file mode 100644 index 0000000000..d8f6533c6b --- /dev/null +++ b/keyboards/foxlab/leaf60/universal/keymaps/mguterl/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 Fox Lab + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/foxlab/leaf60/universal/keymaps/mguterl/keymap.c b/keyboards/foxlab/leaf60/universal/keymaps/mguterl/keymap.c new file mode 100644 index 0000000000..158bdde89c --- /dev/null +++ b/keyboards/foxlab/leaf60/universal/keymaps/mguterl/keymap.c @@ -0,0 +1,43 @@ +/* Copyright 2019 Fox Lab + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H +#include "mguterl.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT_all( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + ESC_CTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(UTIL), + KC_LALT, KC_LALT, KC_LGUI, SPC_UTL, SPC_UTL, SPC_UTL, KC_RALT, MO(1), KC_RGUI, KC_RCTL), + + [_GAMING] = LAYOUT_all( + KC_ESC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_TAB, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______), + + [_UTIL] = LAYOUT_all( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + TG_GAME, KC_MPLY, KC_MPRV, KC_MNXT, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, _______, _______, + _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______) + + +}; diff --git a/keyboards/foxlab/leaf60/universal/keymaps/mguterl/readme.md b/keyboards/foxlab/leaf60/universal/keymaps/mguterl/readme.md new file mode 100644 index 0000000000..7f1d982bce --- /dev/null +++ b/keyboards/foxlab/leaf60/universal/keymaps/mguterl/readme.md @@ -0,0 +1,11 @@ +# Michael Guterl's Leaf60 WKL Layout + +Check out my [userspace](/users/mguterl) for the custom keycodes that are used +in keymap.c. + +This is a pretty standard 60% WKL layout. I add a couple of layers to add +some conveniences and add vimkeys for navigation. + +```sh +make foxlab/leaf60/universal:mguterl:flash +``` diff --git a/keyboards/foxlab/leaf60/universal/rules.mk b/keyboards/foxlab/leaf60/universal/rules.mk index a865410333..1fcd0aa22d 100644 --- a/keyboards/foxlab/leaf60/universal/rules.mk +++ b/keyboards/foxlab/leaf60/universal/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/foxlab/leaf60/universal/universal.h b/keyboards/foxlab/leaf60/universal/universal.h index ab3f388a49..8d8f836185 100644 --- a/keyboards/foxlab/leaf60/universal/universal.h +++ b/keyboards/foxlab/leaf60/universal/universal.h @@ -40,13 +40,13 @@ } #define LAYOUT_60_ansi( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, \ K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \ K400, K401, K402, K406, K410, K411, K412, K413 \ ) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO, K014 }, \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO }, \ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO }, \ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, KC_NO, K213, KC_NO }, \ { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, KC_NO, KC_NO }, \ |