diff options
Diffstat (limited to 'keyboards/ergodox')
106 files changed, 7349 insertions, 1293 deletions
diff --git a/keyboards/ergodox/Makefile b/keyboards/ergodox/Makefile index 05fb588d11..7165350050 100644 --- a/keyboards/ergodox/Makefile +++ b/keyboards/ergodox/Makefile @@ -1,34 +1,5 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make = Make software. -# -# make clean = Clean out built project files. -# -# That's pretty much all you need. To compile, always go make clean, -# followed by make. -# -# For advanced users only: -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -#---------------------------------------------------------------------------- SUBPROJECT_DEFAULT = ez -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= yes # Unicode - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif
\ No newline at end of file diff --git a/keyboards/ergodox/ergodox.c b/keyboards/ergodox/ergodox.c index e69de29bb2..648ec8ad2e 100644 --- a/keyboards/ergodox/ergodox.c +++ b/keyboards/ergodox/ergodox.c @@ -0,0 +1,4 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + diff --git a/keyboards/ergodox/ez/Makefile b/keyboards/ergodox/ez/Makefile index 37e554b304..191c6bb664 100644 --- a/keyboards/ergodox/ez/Makefile +++ b/keyboards/ergodox/ez/Makefile @@ -1,76 +1,3 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make = Make software. -# -# make clean = Clean out built project files. -# -# That's pretty much all you need. To compile, always go make clean, -# followed by make. -# -# For advanced users only: -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -#---------------------------------------------------------------------------- - -# # project specific files -SRC = twimaster.c \ - matrix.c - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# comment out to disable the options. -# - -ifndef QUANTUM_DIR +ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif +endif
\ No newline at end of file diff --git a/keyboards/ergodox/ez/ez.c b/keyboards/ergodox/ez/ez.c index e7afc98590..ddb8ff0cf7 100644 --- a/keyboards/ergodox/ez/ez.c +++ b/keyboards/ergodox/ez/ez.c @@ -82,4 +82,25 @@ out: return mcp23018_status; } - +#ifdef ONEHAND_ENABLE +__attribute__ ((weak)) +// swap-hands action needs a matrix to define the swap +const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { + /* Left hand, matrix positions */ + {{0,13}, {1,13}, {2,13}, {3,13}, {4,13}, {5,13}}, + {{0,12}, {1,12}, {2,12}, {3,12}, {4,12}, {5,12}}, + {{0,11}, {1,11}, {2,11}, {3,11}, {4,11}, {5,11}}, + {{0,10}, {1,10}, {2,10}, {3,10}, {4,10}, {5,10}}, + {{0,9}, {1,9}, {2,9}, {3,9}, {4,9}, {5,9}}, + {{0,8}, {1,8}, {2,8}, {3,8}, {4,8}, {5,8}}, + {{0,7}, {1,7}, {2,7}, {3,7}, {4,7}, {5,7}}, + /* Right hand, matrix positions */ + {{0,6}, {1,6}, {2,6}, {3,6}, {4,6}, {5,6}}, + {{0,5}, {1,5}, {2,5}, {3,5}, {4,5}, {5,5}}, + {{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}}, + {{0,3}, {1,3}, {2,3}, {3,3}, {4,3}, {5,3}}, + {{0,2}, {1,2}, {2,2}, {3,2}, {4,2}, {5,2}}, + {{0,1}, {1,1}, {2,1}, {3,1}, {4,1}, {5,1}}, + {{0,0}, {1,0}, {2,0}, {3,0}, {4,0}, {5,0}}, +}; +#endif diff --git a/keyboards/ergodox/ez/ez.h b/keyboards/ergodox/ez/ez.h index db4ec867bc..124bf850e7 100644 --- a/keyboards/ergodox/ez/ez.h +++ b/keyboards/ergodox/ez/ez.h @@ -119,4 +119,45 @@ inline void ergodox_led_all_set(uint8_t n) { k0D, k1D, k2D, k3D, k4D, KC_NO } \ } +#define KEYMAP_80( \ + \ + /* left hand, spatial positions */ \ + k00,k01,k02,k03,k04,k05,k06, \ + k10,k11,k12,k13,k14,k15,k16, \ + k20,k21,k22,k23,k24,k25, \ + k30,k31,k32,k33,k34,k35,k36, \ + k40,k41,k42,k43,k44, \ + k55,k56, \ + k45,k46,k54, \ + k53,k52,k51, \ + \ + /* right hand, spatial positions */ \ + k07,k08,k09,k0A,k0B,k0C,k0D, \ + k17,k18,k19,k1A,k1B,k1C,k1D, \ + k28,k29,k2A,k2B,k2C,k2D, \ + k37,k38,k39,k3A,k3B,k3C,k3D, \ + k49,k4A,k4B,k4C,k4D, \ + k57,k58, \ + k59,k47,k48, \ + k5C,k5B,k5A ) \ + \ + /* matrix positions */ \ + { \ + { k00, k10, k20, k30, k40, KC_NO }, \ + { k01, k11, k21, k31, k41, k51 }, \ + { k02, k12, k22, k32, k42, k52 }, \ + { k03, k13, k23, k33, k43, k53 }, \ + { k04, k14, k24, k34, k44, k54 }, \ + { k05, k15, k25, k35, k45, k55 }, \ + { k06, k16, KC_NO, k36, k46, k56 }, \ + \ + { k07, k17, KC_NO, k37, k47, k57 }, \ + { k08, k18, k28, k38, k48, k58 }, \ + { k09, k19, k29, k39, k49, k59 }, \ + { k0A, k1A, k2A, k3A, k4A, k5A }, \ + { k0B, k1B, k2B, k3B, k4B, k5B }, \ + { k0C, k1C, k2C, k3C, k4C, k5C }, \ + { k0D, k1D, k2D, k3D, k4D, KC_NO } \ + } + #endif diff --git a/keyboards/ergodox/ez/keymaps/profet_80/ergodox80.png b/keyboards/ergodox/ez/keymaps/profet_80/ergodox80.png Binanew file mode 100644 index 0000000000..66b9752ebc --- /dev/null +++ b/keyboards/ergodox/ez/keymaps/profet_80/ergodox80.png |
