diff options
Diffstat (limited to 'keyboards/ergodox')
114 files changed, 9114 insertions, 516 deletions
diff --git a/keyboards/ergodox/config.h b/keyboards/ergodox/config.h index edc60caae1..3618598320 100644 --- a/keyboards/ergodox/config.h +++ b/keyboards/ergodox/config.h @@ -1,10 +1,11 @@ #ifndef KEYBOARDS_ERGODOX_CONFIG_H_ #define KEYBOARDS_ERGODOX_CONFIG_H_ -#define MOUSEKEY_DELAY 100 #define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_MAX_SPEED 3 -#define MOUSEKEY_TIME_TO_MAX 10 +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_TIME_TO_MAX 5 +#define MOUSEKEY_MAX_SPEED 2 +#define MOUSEKEY_WHEEL_DELAY 0 #define TAPPING_TOGGLE 1 @@ -33,4 +34,4 @@ #endif -#endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */ +#endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */
\ No newline at end of file diff --git a/keyboards/ergodox/ez/Makefile b/keyboards/ergodox/ez/Makefile index 191c6bb664..1098332b8a 100644 --- a/keyboards/ergodox/ez/Makefile +++ b/keyboards/ergodox/ez/Makefile @@ -1,3 +1,8 @@ +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +COMMAND_ENABLE = no # Commands for debug and configuration +RGBLIGHT_ENABLE ?= yes +MIDI_ENABLE ?= no + ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif
\ No newline at end of file +endif diff --git a/keyboards/ergodox/ez/config.h b/keyboards/ergodox/ez/config.h index 084a044ee1..e4f95c302c 100644 --- a/keyboards/ergodox/ez/config.h +++ b/keyboards/ergodox/ez/config.h @@ -21,6 +21,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "../config.h" +#include "config_common.h" + /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x1307 @@ -39,10 +41,24 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LED_BRIGHTNESS_LO 15 #define LED_BRIGHTNESS_HI 255 +/* ws2812 RGB LED */ +#define RGB_DI_PIN D7 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 15 // Number of LEDs +#define RGBLIGHT_HUE_STEP 12 +#define RGBLIGHT_SAT_STEP 255 +#define RGBLIGHT_VAL_STEP 12 + +// #define RGB_MIDI +#define RGBW_BB_TWI + +#define RGBW 1 /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 +#define USB_MAX_POWER_CONSUMPTION 500 + /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ergodox/ez/ez.c b/keyboards/ergodox/ez/ez.c index ddb8ff0cf7..3e19f23028 100644 --- a/keyboards/ergodox/ez/ez.c +++ b/keyboards/ergodox/ez/ez.c @@ -16,10 +16,10 @@ void matrix_init_kb(void) { // unused pins - C7, D4, D5, D7, E6 // set as input with internal pull-ip enabled DDRC &= ~(1<<7); - DDRD &= ~(1<<7 | 1<<5 | 1<<4); + DDRD &= ~(1<<5 | 1<<4); DDRE &= ~(1<<6); PORTC |= (1<<7); - PORTD |= (1<<7 | 1<<5 | 1<<4); + PORTD |= (1<<5 | 1<<4); PORTE |= (1<<6); ergodox_blink_all_leds(); @@ -51,6 +51,10 @@ uint8_t init_mcp23018(void) { mcp23018_status = 0x20; // I2C subsystem + + // uint8_t sreg_prev; + // sreg_prev=SREG; + // cli(); if (i2c_initialized == 0) { i2c_init(); // on pins D(1,0) i2c_initialized++; @@ -79,6 +83,8 @@ uint8_t init_mcp23018(void) { out: i2c_stop(); + // SREG=sreg_prev; + return mcp23018_status; } diff --git a/keyboards/ergodox/ez/matrix.c b/keyboards/ergodox/ez/matrix.c index a19bab90b2..43f5152591 100644 --- a/keyboards/ergodox/ez/matrix.c +++ b/keyboards/ergodox/ez/matrix.c @@ -121,7 +121,7 @@ void matrix_init(void) matrix_scan_count = 0; #endif - matrix_init_kb(); + matrix_init_quantum(); } diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk index a9715beb85..64b2db8158 100644 --- a/keyboards/ergodox/ez/rules.mk +++ b/keyboards/ergodox/ez/rules.mk @@ -72,6 +72,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 # SLEEP_LED_ENABLE = no +API_SYSEX_ENABLE ?= no +RGBLIGHT_ENABLE ?= yes ifndef QUANTUM_DIR include ../../../Makefile diff --git a/keyboards/ergodox/infinity/infinity.c b/keyboards/ergodox/infinity/infinity.c index c5793385fe..02db67eaf2 100644 --- a/keyboards/ergodox/infinity/infinity.c +++ b/keyboards/ergodox/infinity/infinity.c @@ -38,7 +38,6 @@ void init_serial_link_hal(void) { // Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced // Which will reduce the brightness range #define PRESCALAR_DEFINE 0 -#ifdef VISUALIZER_ENABLE void lcd_backlight_hal_init(void) { // Setup Backlight SIM->SCGC6 |= SIM_SCGC6_FTM0; @@ -76,7 +75,6 @@ void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) { CHANNEL_GREEN.CnV = g; CHANNEL_BLUE.CnV = b; } -#endif __attribute__ ((weak)) void matrix_init_user(void) { @@ -92,6 +90,10 @@ void matrix_init_kb(void) { // runs once when the firmware starts up matrix_init_user(); + // The backlight always has to be initialized, otherwise it will stay lit +#ifndef VISUALIZER_ENABLE + lcd_backlight_hal_init(); +#endif } void matrix_scan_kb(void) { diff --git a/keyboards/ergodox/infinity/led.c b/keyboards/ergodox/infinity/led.c index 77195bb358..8175c1c5c5 100644 --- a/keyboards/ergodox/infinity/led.c +++ b/keyboards/ergodox/infinity/led.c @@ -21,29 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. void led_set(uint8_t usb_led) { -// The LCD backlight functionality conflicts with this simple -// red backlight -#if !defined(LCD_BACKLIGHT_ENABLE) && defined(STATUS_LED_ENABLE) - // PTC1: LCD Backlight Red(0:on/1:off) - GPIOC->PDDR |= (1<<1); - PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - GPIOC->PCOR |= (1<<1); - } else { - GPIOC->PSOR |= (1<<1); - } -#elif !defined(LCD_BACKLIGHT_ENABLE) + //TODO: Add led emulation if there's no customized visualization (void)usb_led; - GPIOC->PDDR |= (1<<1); - PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1 |