summaryrefslogtreecommitdiffstats
path: root/keyboards/ergodox/keymaps/algernon/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/ergodox/keymaps/algernon/readme.md')
-rw-r--r--keyboards/ergodox/keymaps/algernon/readme.md141
1 files changed, 3 insertions, 138 deletions
diff --git a/keyboards/ergodox/keymaps/algernon/readme.md b/keyboards/ergodox/keymaps/algernon/readme.md
index f15b676528..015bd7cd32 100644
--- a/keyboards/ergodox/keymaps/algernon/readme.md
+++ b/keyboards/ergodox/keymaps/algernon/readme.md
@@ -27,7 +27,7 @@ Some of the things in the layout only work when one uses [Spacemacs][spacemacs]
- [Unicode Symbol Input](#unicode-symbol-input)
* [Building](#building)
- [Using on Windows](#using-on-windows)
-* [Changelog](#changelog)
+* [Changelog](https://github.com/algernon/ergodox-layout/blob/master/NEWS.md#readme)
* [License](#license)
# Layouts
@@ -43,6 +43,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest
* The `GUI` key is special, because when I double-tap it, it sends `GUI + w`, which pops up an application selector. It also switches to a one-shot layer, where the number row on the left half turns into app selector macros, for the most common things I usually want to switch to. Otherwise it behaves as on a normal layout.
* The `ESC` key also doubles as a one-shot cancel key: if tapped while any of the one-shot modifiers are in-flight (as in, single-tapped, and not expired yet), it cancels all one-shot modifiers. It also cancels the **Hun** layer, if active. Otherwise it sends the usual keycode.
* The **Media** and **Hun** layer keys are one-shot, the **STENO** key is a toggle.
+* The **Fx** key is one-shot, and activates the **Media** layer, along with a one-shot `Alt`.
* When holding the `Tab`/**Arrow** key, the arrow layer activates while the key is held. Tapping the key produces the normal, `Tab` key. Double-tapping it toggles the **Arrow** layer on until a third tap.
* Tapping the `:` key once yields `:`, tapping it twice yields `;`.
* Tapping the `[{(`/`)}]` keys once yields `[` (or `{` when shifted), tapping them twice yields `(`.
@@ -93,12 +94,7 @@ Unless noted otherwise, the layers use a dim light for the LEDs, while modifiers
Once in the Unicode Symbol Input mode, one is able to type in symbol names, press `Enter` or `Space`, and get the Unicode symbol itself back. When in the mode, a capital `U` is printed first. Once the sequence is finished, all of it is erased by sending enough `Backspace` taps, and the firmware starts the OS-specific unicode input sequence. Then, it looks up the symbol name, and enters the associated code. If it is not found, it will just replay the pressed keycodes.
-The currently supported symbols are:
-
-- `snowman`: ☃
-- `kiss`: 😙
-- `rofl`: 🤣
-- `poop`: 💩
+For the list of supported symbols, please see the source.
This is an experimental feature, and may or may not work reliably.
@@ -145,137 +141,6 @@ $ make keyboard=ergodox keymap=algernon
The keymap default to forcing NKRO, which seems to upset Windows, and except the modifiers, none of them work. If you experience this problem, recompile the firmware with `FORCE_NKRO=no` added to the `make` command line.
-# Changelog
-
-## v1.7
-
-*2016-09-18*
-
-### Overall changes
-
-* The number row has been completely rearranged on both the [Base](#base-layer) and the [ADORE](#adore-layer) layers.
-* The number/function key behavior was changed: function keys are now on the **Media**.
-* The `:`/`;` and `-`/`_` keys were put back to their thumb position on the bottom row, on both the [Base](#base-layer) and [ADORE](#adore-layer) layers.
-* The bottom large keys on the inner side of each half now function as [tmux](http://tmux.github.io/) keys: the left to send the prefix, the right to send the `display-panes` key. The left also doubles as a GNU screen prefix key, and sends `C-a` when double tapped.
-* A number of functions, such as the **AppSel** layer, now require the `hid-commands` tool to be running, with the output of `hid_listen` being piped to it.
-
-### ADORE
-
-* `Y` and `X` have been swapped again.
-
-### Media/Navigation layer
-
-* The function keys are now on this layer.
-* Mouse keys have been removed.
-* Media start/stop/prev/next have been removed.
-* `Print screen` has been removed.
-* There is only one screen lock key now.
-
-### Heatmap
-
-* Fixed a few issues in the finger-stats calculation.
-* The tool now also timestamps and saves all input lines to a logfile, which it loads on start, allowing one to continue the collection after upgrading the tool.
-* The heatmap tool will now colorize the stats by default.
-* The periodic stats are now printed in a more compact format.
-
-### Tools
-
-* Added a new tool, `tools/layer-notify` that listens to layer change events on the HID console, and pops up a notification on layer changes.
-* Another new tool, `tools/text-to-log.py` has been added that converts arbitrary text to a keylogger output, which can be fed to the heatmap generator.
-* A number of features have been moved to the `tools/hid-commands` utility. These generally are OS dependent, and are easier to implement on the software side.
-
-## v1.6
-
-*2016-08-24*
-
-### Base layer changes
-
-* The parentheses & bracket keys have been merged: tapping them results in `[` or `{` (if it was shifted), double tapping leads to `(`.
-* The `:;` and `-_` keys are now available on the base layer, on their [ADORE](#adore-layer) location, too, just below `[{(`/`]})`.
-* The `Apps` key has been replaced by `F12`.
-* The `-`/`_` is no longer a tap-dance key.
-
-### ADORE layer changes
-
-* Adjustments were made to the [ADORE](#adore-layer) layer, to separate some inconvenient combinations.
-
-### Miscellaneous changes
-
-* `LEAD u` now starts the symbolic unicode input system, instead of the OS-one.
-* The mouse acceleration keys on the **Navigation/Media** layer have been turned into toggles: tap them once to turn them on, until tapped again. Tapping an accelerator button will turn all the others off.
-* When the **ARROW** layer is on, the *red* and *blue* LEDs light up now.
-
-### Heatmap
-
-* The built-in keylogger has been greatly enhanced, it now outputs the pressed state, and the layer (Dvorak or ADORE). As such, the `ADORE_AUTOLOG` option has been removed, instead there is `AUTOLOG_ENABLE` now, which when enabled, makes the keylogger start when the keyboard boots. It defaults to off.
-* The heatmap generator received a lot of updates.
-
-## v1.5
-
-*2016-08-12*
-
-* The **1HAND** layer has been removed.
-* A `Delete` key is now available on the right thumb cluster.
-* The [ADORE](#adore-layer) layer received a major update, see the layout image above.
-* It is now possible to enable automatic logging for the [ADORE](#adore-layer) layer, by setting the `ADORE_AUTOLOG` makefile variable to `yes` when compiling the keymap. It is off by default.
-* The `~` key and the `Media Next/Prev` key have been swapped on the [base layer](#base-layer).
-* On the **ARROW** layer, `Backspace` has been replaced by `Enter`.
-* There is some experimental support for entering Unicode symbols.
-
-## v1.4
-
-*2016-07-29*
-
-* When toggling the key logging on or off, the LEDs will do a little dance.
-* The keylogger is now optional, but enabled by default. Use `KEYLOGGER_ENABLE=no` on the `make` command line to disable it.
-* The `TAB`/`ARRW` key was turned into a tap-dance key, allowing one to toggle the **ARROW** layer on by double-tapping, and as such, avoid the need to hold the key.
-* The `-`/`_` key was turned into a tap-dance key too.
-* There is now a way to travel time with the keyboard, toggle the feature on by hitting `LEAD t`.
-
-## v1.3
-
-*2016-07-06*
-
-* Added support for logging keys, by pressing `LEAD d`. Also included is a tool to generate a [heatmap](#heatmap) out of the logs.
-* The arrow and navigation keys were rearranged again, and now require an additional key being held to activate. See the [base layer](#base-layer) for an image that shows where arrows are.
-* The **experimental** layer has been redone, and is now called [ADORE](#adore-layer), and as such, can be enabled by `LEAD a` now.
-* Switching between Dvorak and ADORE is now persisted into EEPROM, and survives a reboot.
-
-## v1.2
-
-*2016-06-22*
-
-* The forced NKRO mode can be easily toggled off at compile-time, to make the firmware compatible with [certain operating systems](#using-on-windows).
-* The `:;` key has changed behaviour: to access the `;` symbol, the key needs to be double-tapped, instead of shifted.
-* The `=` and `\` keys were swapped, `=` moved to the home row, on both the [base](#base-layer) and the **experimental** layers.
-* The arrow and navigation keys were redone, they are now more accessible, but the navigation keys require an extra tap to access.
-* The **Emacs** layer is gone, replaced by a simplified **navigation and media** layer.
-* `LEAD v` types the firmware version, and the keymap version.
-* On the **experimental** layer, the `L` and `Q`, and the `K` and `G` keys were swapped.
-* The [Steno](#steno-layer) layer gained a few more `#` and `*` keys, to make it easier on my fingers.
-
-## v1.1
-
-*2016-06-14*
-
-* The keyboard starts in NKRO mode, bootmagic and other things are disabled.
-* A [Steno](#steno-layer) layer was added, to be used with Plover.
-* An **experimental** layer was added, something halfway between Dvorak and Capewell-Dvorak. A work in progress.
-* `LEAD y` types `\o/`.
-* Some keys on the [Base](#base-layer) layer have been moved around:
- - `?` moved to the left pinky, left of `Q`.
- - `=` shifted one row down, but `F11` stayed where it was.
- - `-` on the left half was replaced by `Tab`.
- - `Tab`'s original position is taken by a `Media Next`/`Media Prev` key.
- - `:` now inputs `;` when shifted.
-* `ESC` cancels the **Hungarian** layer too, not just modifiers.
-
-## v1.0
-
-*2016-05-26*
-
-Initial version.
-
# License
The layout, being a derivative of the original TMK firmware which is under the GPL-2+, this layout is under the GPL as well, but GPL-3+, rather than the older version.