1 files changed, 90 insertions, 0 deletions
diff --git a/keyboards/custommk/evo70_r2/config.h b/keyboards/custommk/evo70_r2/config.h
new file mode 100644
index 0000000000..25ab789d75
--- /dev/null
+++ b/keyboards/custommk/evo70_r2/config.h
@@ -0,0 +1,90 @@
+/* Copyright 2023 David Hoelscher (@customMK)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// No VBUS sense needed
+#define BOARD_OTG_NOVBUSSENS 1
+
+#define STM32_LSECLK 32768
+
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+#define MATRIX_ROW_PINS { A8, A1, A2, B1, A7 }
+
+// FRAM configuration
+#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A0
+#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 4 // 48MHz / 4 = 12MHz; max supported by MB85R64 is 20MHz
+
+// External flash configuration
+#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B12
+#define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 1  // 48MHz; max supported by W25Q128JV is 133MHz
+#define EXTERNAL_FLASH_SIZE (16 * 1024 * 1024)  //128Mbit or 16MByte
+#define EXTERNAL_FLASH_SPI_TIMEOUT 200000 //datasheet max is 200seconds for flash chip erase
+
+// SPI Configuration
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN B3
+#define SPI_SCK_PAL_MODE 5
+#define SPI_MOSI_PIN B5
+#define SPI_MOSI_PAL_MODE 5
+#define SPI_MISO_PIN B4
+#define SPI_MISO_PAL_MODE 5
+
+
+// SPI LCD Configuration
+#define LCD_RST_PIN B2
+#define LCD_CS_PIN A9
+#define LCD_DC_PIN B0
+#ifndef LCD_ACTIVITY_TIMEOUT
+    #define LCD_ACTIVITY_TIMEOUT 30000
+#endif
+
+// I2C OLED Configuration
+#define I2C1_SCL_PIN B6
+#define I2C1_SDA_PIN B9
+
+#define I2C1_CLOCK_SPEED 400000
+#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
+
+#define OLED_DISABLE_TIMEOUT
+
+#define COL_SHIFT_IN_PIN B14
+#define COL_SHIFT_CLK_PIN B15
+
+#define QUANTUM_PAINTER_SUPPORTS_256_PALETTE TRUE
+#define QUANTUM_PAINTER_SUPPORTS_NATIVE_COLORS TRUE
+
+#define OLED_UPDATE_INTERVAL 66
+
+#define BACKLIGHT_PWM_DRIVER PWMD3
+#define BACKLIGHT_PWM_CHANNEL 1
+#define BACKLIGHT_PAL_MODE 2
+
+#define WS2812_PWM_DRIVER PWMD1
+#define WS2812_PWM_CHANNEL 3
+#define WS2812_PWM_PAL_MODE 1
+#define WS2812_DMA_STREAM STM32_DMA2_STREAM5
+#define WS2812_DMA_CHANNEL 6
+
+#define TAP_CODE_DELAY 10
+
+#define AUDIO_PIN B8
+#define AUDIO_PWM_DRIVER PWMD4
+#define AUDIO_PWM_CHANNEL 3 
+#define AUDIO_PWM_PAL_MODE 2
+#define AUDIO_STATE_TIMER GPTD5
+#define AUDIO_INIT_DELAY