6 files changed, 4 insertions, 44 deletions
diff --git a/keyboards/clueboard/66_hotswap/config.h b/keyboards/clueboard/66_hotswap/config.h
index 4e3af45222..e6e27713c8 100644
--- a/keyboards/clueboard/66_hotswap/config.h
+++ b/keyboards/clueboard/66_hotswap/config.h
@@ -16,7 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #pragma once
-#include "config_common.h"
 
 /*
  * Feature disable options
diff --git a/keyboards/clueboard/66_hotswap/gen1/config.h b/keyboards/clueboard/66_hotswap/gen1/config.h
index 8fce4af364..b50b676713 100644
--- a/keyboards/clueboard/66_hotswap/gen1/config.h
+++ b/keyboards/clueboard/66_hotswap/gen1/config.h
@@ -16,36 +16,6 @@
  */
 
 #pragma once
-#include "config_common.h"
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-// #define DEBOUNCE 6
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
 
 /*
  * Feature disable options
@@ -63,10 +33,6 @@
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
- /* Backlight configuration
- */
-#define BACKLIGHT_LEVELS 10
-
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
 // The address will vary depending on your wiring:
diff --git a/keyboards/clueboard/66_hotswap/gen1/info.json b/keyboards/clueboard/66_hotswap/gen1/info.json
index 2b42bf22e8..afa4f8adb5 100644
--- a/keyboards/clueboard/66_hotswap/gen1/info.json
+++ b/keyboards/clueboard/66_hotswap/gen1/info.json
@@ -2,7 +2,6 @@
   "manufacturer": "Clueboard",
   "keyboard_name": "Clueboard 66% HotSwap Gen1",
   "maintainer": "skullydazed",
-  "debounce": 5,
   "processor": "STM32F303",
   "board": "QMK_PROTON_C",
   "bootloader": "stm32-dfu",
diff --git a/keyboards/clueboard/66_hotswap/prototype/config.h b/keyboards/clueboard/66_hotswap/prototype/config.h
index a1ab703c34..651037af12 100644
--- a/keyboards/clueboard/66_hotswap/prototype/config.h
+++ b/keyboards/clueboard/66_hotswap/prototype/config.h
@@ -1,5 +1,4 @@
 #pragma once
-#include "config_common.h"
 
 /* Speaker configuration
  */
@@ -11,10 +10,6 @@
  */
 #define NO_ACTION_TAPPING
 
-/* Backlight configuration
- */
-#define BACKLIGHT_LEVELS 1
-
 /* Underlight configuration
  */
 #define RGBLIGHT_EFFECT_BREATHE_CENTER 1
diff --git a/keyboards/clueboard/66_hotswap/prototype/info.json b/keyboards/clueboard/66_hotswap/prototype/info.json
index d29a4e7169..522eda3fba 100644
--- a/keyboards/clueboard/66_hotswap/prototype/info.json
+++ b/keyboards/clueboard/66_hotswap/prototype/info.json
@@ -2,7 +2,6 @@
   "manufacturer": "Clueboard",
   "keyboard_name": "Clueboard 66% HotSwap Prototype",
   "maintainer": "skullydazed",
-  "debounce": 5,
   "diode_direction": "COL2ROW",
   "processor": "atmega32u4",
   "bootloader": "atmel-dfu",
@@ -51,6 +50,10 @@
     "pid": "0x2390",
     "vid": "0xC1ED"
   },
+  "backlight": {
+    "driver": "custom",
+    "levels": 1
+  },
   "community_layouts": ["66_ansi"],
   "layout_aliases": {
     "LAYOUT": "LAYOUT_all"
diff --git a/keyboards/clueboard/66_hotswap/prototype/rules.mk b/keyboards/clueboard/66_hotswap/prototype/rules.mk
index 8193682fd3..4da205a168 100644
--- a/keyboards/clueboard/66_hotswap/prototype/rules.mk
+++ b/keyboards/clueboard/66_hotswap/prototype/rules.mk
@@ -1,3 +1 @@
-BACKLIGHT_DRIVER = custom
-
 LTO_ENABLE = yes