diff options
Diffstat (limited to 'keyboards/bastardkb/charybdis')
37 files changed, 243 insertions, 523 deletions
diff --git a/keyboards/bastardkb/charybdis/3x5/blackpill/info.json b/keyboards/bastardkb/charybdis/3x5/blackpill/info.json index 1e347df9b2..c2ff6d458a 100644 --- a/keyboards/bastardkb/charybdis/3x5/blackpill/info.json +++ b/keyboards/bastardkb/charybdis/3x5/blackpill/info.json @@ -1,6 +1,6 @@ { "keyboard_name": "Charybdis Nano (3x5) Blackpill", "usb": { - "device_version": "1.0.0", - }, + "device_version": "1.0.0" + } } diff --git a/keyboards/bastardkb/charybdis/3x5/config.h b/keyboards/bastardkb/charybdis/3x5/config.h index 6e3b8a7124..2022b1cee6 100644 --- a/keyboards/bastardkb/charybdis/3x5/config.h +++ b/keyboards/bastardkb/charybdis/3x5/config.h @@ -31,17 +31,10 @@ #define ROTATIONAL_TRANSFORM_ANGLE -25 /* RGB settings. */ -#define RGBLED_NUM 36 -#define RGBLED_SPLIT \ - { 18, 18 } - -/* RGB matrix support. */ #ifdef RGB_MATRIX_ENABLE -# define SPLIT_TRANSPORT_MIRROR +# define RGBLED_NUM 36 +# define RGBLED_SPLIT \ + { 18, 18 } # define DRIVER_LED_TOTAL RGBLED_NUM # define RGB_MATRIX_SPLIT RGBLED_SPLIT -# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50 -# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS -# define RGB_DISABLE_WHEN_USB_SUSPENDED -# define RGB_MATRIX_KEYPRESSES #endif diff --git a/keyboards/bastardkb/charybdis/3x5/info.json b/keyboards/bastardkb/charybdis/3x5/info.json index 41c80b457f..efa863ea4b 100644 --- a/keyboards/bastardkb/charybdis/3x5/info.json +++ b/keyboards/bastardkb/charybdis/3x5/info.json @@ -1,9 +1,9 @@ { - "url": "https://bastardkb.com/charybdis-nano", "manufacturer": "Bastard Keyboards", + "url": "https://bastardkb.com/charybdis-nano", "usb": { - "vid": "0xA8F8", "pid": "0x1832", + "vid": "0xA8F8" }, "layouts": { "LAYOUT_charybdis_3x5": { diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/default/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/default/config.h deleted file mode 100644 index f2dd86c653..0000000000 --- a/keyboards/bastardkb/charybdis/3x5/keymaps/default/config.h +++ /dev/null @@ -1,54 +0,0 @@ -/** - * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#ifndef TAPPING_TERM -/** - * \brief Configure the global tapping term (default: 200ms). - * - * If you have a lot of accidental mod activations, crank up the tapping term. - * - * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term - */ -# define TAPPING_TERM 200 -#endif // TAPPING_TERM - -/* RGB Matrix. */ - -#ifdef RGB_MATRIX_ENABLE -// Disable control of RGB matrix by keycodes (must use firmware implementation -// to control the feature). -# define RGB_MATRIX_DISABLE_KEYCODES - -// Limit maximum brightness to keep power consumption reasonable, and avoid -// disconnects. -# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS -# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64 - -// Rainbow swirl as startup mode. -# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT - -// Slow swirl at startup. -# define RGB_MATRIX_STARTUP_SPD 32 - -// Startup values. -# define RGB_MATRIX_STARTUP_HUE 0 -# define RGB_MATRIX_STARTUP_SAT 255 -# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS -# define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL -#endif // RGB_MATRIX_ENABLE diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h index d20131e9cf..5d9d4662f0 100644 --- a/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h @@ -24,49 +24,6 @@ /* Disable unused features. */ #define NO_ACTION_ONESHOT -#ifndef TAPPING_TERM -/** - * \brief Configure the global tapping term (default: 200ms). - * - * If you have a lot of accidental mod activations, crank up the tapping term. - * - * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term - */ -# define TAPPING_TERM 200 -#endif // TAPPING_TERM - -/** - * \brief Enable rapid switch from tap to hold. - * - * Note that a side-effect of this setting is to disable auto-repeat when - * pressing key twice, except for one-shot keys. - * - * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-force-hold - */ -#define TAPPING_FORCE_HOLD - -/* - * Tap-or-Hold decision modes. - * - * Note that the following flags behave differently when combined (ie. when 2 or - * more are enabled). - * - * See bit.ly/tap-or-hold for a visual explanation of the following tap-or-hold - * decision modes. - */ - -/** - * \brief Faster tap-hold trigger. - * - * Without `PERMISSIVE_HOLD`, within `TAPPING_TERM`: - * Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ ae - * With `PERMISSIVE_HOLD`, within `TAPPING_TERM`: - * Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ Mod+e - * - * See docs.qmk.fm/using-qmk/software-features/tap_hold#permissive-hold - */ -#define PERMISSIVE_HOLD - /** * \brief Prevent normal rollover on alphas from accidentally triggering mods. * @@ -76,8 +33,6 @@ * Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ Mod+e * With `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`: * Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ ae - * - * See docs.qmk.fm/using-qmk/software-features/tap_hold#ignore-mod-tap-interrupt */ #define IGNORE_MOD_TAP_INTERRUPT @@ -89,25 +44,3 @@ // - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD` // #define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE #endif // POINTING_DEVICE_ENABLE - -/* RGB Matrix. */ - -#ifdef RGB_MATRIX_ENABLE -// Limit maximum brightness to keep power consumption reasonable, and avoid -// disconnects. -# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS -# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64 - -// Rainbow swirl as startup mode. -# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT - -// Slow swirl at startup. -# define RGB_MATRIX_STARTUP_SPD 32 - -// Startup values. -# define RGB_MATRIX_STARTUP_HUE 0 -# define RGB_MATRIX_STARTUP_SAT 255 -# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS -# define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL -#endif // RGB_MATRIX_ENABLE diff --git a/keyboards/bastardkb/charybdis/3x5/v1/elitec/info.json b/keyboards/bastardkb/charybdis/3x5/v1/elitec/info.json index 9071212f33..b83dc6c3f8 100644 --- a/keyboards/bastardkb/charybdis/3x5/v1/elitec/info.json +++ b/keyboards/bastardkb/charybdis/3x5/v1/elitec/info.json @@ -1,6 +1,6 @@ { "keyboard_name": "Charybdis Nano (3x5) Elite-C", "usb": { - "device_version": "1.0.0", - }, + "device_version": "1.0.0" + } } diff --git a/keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json b/keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json index 7c90e5d5a3..78453c44ff 100644 --- a/keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json +++ b/keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json @@ -1,6 +1,6 @@ { "keyboard_name": "Charybdis Nano (3x5) Elite-C", "usb": { - "device_version": "2.0.0", - }, + "device_version": "2.0.0" + } } diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h index d4688aef92..8e4a2de892 100644 --- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h +++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h @@ -21,14 +21,6 @@ #define MATRIX_ROW_PINS \ { GP26, GP5, GP4, GP9 } -/* Handedness. */ -#define MASTER_RIGHT - -// To use the handedness pin, resistors need to be installed on the adapter PCB. -// If so, uncomment the following code, and undefine MASTER_RIGHT above. -// #define SPLIT_HAND_PIN GP13 -// #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left. - /* serial.c configuration (for split keyboard). */ #define SOFT_SERIAL_PIN GP1 @@ -43,68 +35,3 @@ #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U - -/** RGB Matrix. */ - -#ifdef RGB_MATRIX_ENABLE -// Enable all animations on ARM boards since they have plenty of memory -// available for it. -# define ENABLE_RGB_MATRIX_ALPHAS_MODS -# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -# define ENABLE_RGB_MATRIX_BREATHING -# define ENABLE_RGB_MATRIX_BAND_SAT -# define ENABLE_RGB_MATRIX_BAND_VAL -# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL -# define ENABLE_RGB_MATRIX_CYCLE_ALL -# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL -# define ENABLE_RGB_MATRIX_DUAL_BEACON -# define ENABLE_RGB_MATRIX_RAINBOW_BEACON -# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS -# define ENABLE_RGB_MATRIX_RAINDROPS -# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -# define ENABLE_RGB_MATRIX_HUE_BREATHING -# define ENABLE_RGB_MATRIX_HUE_PENDULUM -# define ENABLE_RGB_MATRIX_HUE_WAVE -# define ENABLE_RGB_MATRIX_TYPING_HEATMAP -# define ENABLE_RGB_MATRIX_DIGITAL_RAIN -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define ENABLE_RGB_MATRIX_SPLASH -# define ENABLE_RGB_MATRIX_MULTISPLASH -# define ENABLE_RGB_MATRIX_SOLID_SPLASH -# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH - -// Limit maximum brightness to keep power consumption reasonable, and avoid -// disconnects. -# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS -# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64 - -// Rainbow swirl as startup mode. -# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT - -// Slow swirl at startup. -# define RGB_MATRIX_STARTUP_SPD 32 - -// Startup values. -# define RGB_MATRIX_STARTUP_HUE 0 -# define RGB_MATRIX_STARTUP_SAT 255 -# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS -# define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL -#endif // RGB_MATRIX_ENABLE diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json b/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json index 1aa1e8811d..98f436f52b 100644 --- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json +++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json @@ -1,6 +1,6 @@ { "keyboard_name": "Charybdis Nano (3x5) Splinky", "usb": { - "device_version": "2.0.0", - }, + "device_version": "2.0.0" + } } diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/config.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/config.h index 70b65a97c7..516f3d9df7 100644 --- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/config.h +++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/config.h @@ -25,3 +25,11 @@ #define SPI_SCK_PIN GP18 #define SPI_MOSI_PIN GP19 #define POINTING_DEVICE_CS_PIN GP14 + +/* Handedness. */ +#define MASTER_RIGHT + +// To use the handedness pin, resistors need to be installed on the adapter PCB. +// If so, uncomment the following code, and undefine MASTER_RIGHT above. +// #define SPLIT_HAND_PIN GP13 +// #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left. diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/config.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/config.h index d53c5a3c41..09165a8e97 100644 --- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/config.h +++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/config.h @@ -25,3 +25,11 @@ #define SPI_SCK_PIN GP22 #define SPI_MOSI_PIN GP23 #define POINTING_DEVICE_CS_PIN GP16 + +/* Handedness. */ +#define MASTER_RIGHT + +// To use the handedness pin, resistors need to be installed on the adapter PCB. +// If so, uncomment the following code, and undefine MASTER_RIGHT above. +// #define SPLIT_HAND_PIN GP15 +// #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left. diff --git a/keyboards/bastardkb/charybdis/3x5/v2/stemcell/info.json b/keyboards/bastardkb/charybdis/3x5/v2/stemcell/info.json index 2aee1fe40b..b344c1cbfc 100644 --- a/keyboards/bastardkb/charybdis/3x5/v2/stemcell/info.json +++ b/keyboards/bastardkb/charybdis/3x5/v2/stemcell/info.json @@ -1,6 +1,6 @@ { "keyboard_name": "Charybdis Nano (3x5) STeMCell", "usb": { - "device_version": "2.0.0" + "device_version": "2.0.0" } } diff --git a/keyboards/bastardkb/charybdis/3x6/blackpill/info.json b/keyboards/bastardkb/charybdis/3x6/blackpill/info.json index 73a1359e00..54eda1eadf 100644 --- a/keyboards/bastardkb/charybdis/3x6/blackpill/info.json +++ b/keyboards/bastardkb/charybdis/3x6/blackpill/info.json @@ -1,6 +1,6 @@ { "keyboard_name": "Charybdis Mini (3x6) Blackpill", "usb": { - "device_version": "1.0.0", - }, + "device_version": "1.0.0" + } } diff --git a/keyboards/bastardkb/charybdis/3x6/config.h b/keyboards/bastardkb/charybdis/3x6/config.h index 6b31a773fc..647a02d8fa 100644 --- a/keyboards/bastardkb/charybdis/3x6/config.h +++ b/keyboards/bastardkb/charybdis/3x6/config.h @@ -18,8 +18,6 @@ #pragma once -#include "config_common.h" - /* Key matrix configuration. */ #define MATRIX_ROWS 8 // Rows are doubled-up. #define MATRIX_COLS 6 @@ -33,17 +31,10 @@ #define ROTATIONAL_TRANSFORM_ANGLE -25 /* RGB settings. */ -#define RGBLED_NUM 42 -#define RGBLED_SPLIT \ - { 21, 21 } - -/* RGB matrix support. */ #ifdef RGB_MATRIX_ENABLE -# define SPLIT_TRANSPORT_MIRROR +# define RGBLED_NUM 42 +# define RGBLED_SPLIT \ + { 21, 21 } # define DRIVER_LED_TOTAL RGBLED_NUM # define RGB_MATRIX_SPLIT RGBLED_SPLIT -# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50 -# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS -# define RGB_DISABLE_WHEN_USB_SUSPENDED -# define RGB_MATRIX_KEYPRESSES #endif diff --git a/keyboards/bastardkb/charybdis/3x6/info.json b/keyboards/bastardkb/charybdis/3x6/info.json index 0b4428cdbe..4851da1d53 100644 --- a/keyboards/bastardkb/charybdis/3x6/info.json +++ b/keyboards/bastardkb/charybdis/3x6/info.json @@ -1,98 +1,98 @@ { "url": "https://bastardkb.com", "usb": { - "pid": "0x1834", + "pid": "0x1834" }, "layouts": { "LAYOUT_charybdis_3x6": { "layout": [ - {"label":"L00", "x":0, "y":0}, - {"label":"L01", "x":1, "y":0}, - {"label":"L02", "x":2, "y":0}, - {"label":"L03", "x":3, "y":0}, - {"label":"L04", "x":4, "y":0}, - {"label":"L05", "x":5, "y":0}, - {"label":"R00", "x":11, "y":0}, - {"label":"R01", "x":12, "y":0}, - {"label":"R02", "x":13, "y":0}, - {"label":"R03", "x":14, "y":0}, - {"label":"R04", "x":15, "y":0}, - {"label":"R05", "x":16, "y":0}, - {"label":"L10", "x":0, "y":1}, - {"label":"L11", "x":1, "y":1}, - {"label":"L12", "x":2, "y":1}, - {"label":"L13", "x":3, "y":1}, - {"label":"L14", "x":4, "y":1}, - {"label":"L15", "x":5, "y":1}, - {"label":"R10", "x":11, "y":1}, - {"label":"R11", "x":12, "y":1}, - {"label":"R12", "x":13, "y":1}, - {"label":"R13", "x":14, "y":1}, - {"label":"R14", "x":15, "y":1}, - {"label":"R15", "x":16, "y":1}, - {"label":"L20", "x":0, "y":2}, - {"label":"L21", "x":1, "y":2}, - {"label":"L22", "x":2, "y":2}, - {"label":"L23", "x":3, "y":2}, - {"label":"L24", "x":4, "y":2}, - {"label":"L25", "x":5, "y":2}, - {"label":"R20", "x":11, "y":2}, - {"label":"R21", "x":12, "y":2}, - {"label":"R22", "x":13, "y":2}, - {"label":"R23", "x":14, "y":2}, - {"label":"R24", "x":15, "y":2}, - {"label":"R25", "x":16, "y":2}, - {"label":"L33", "x":5, "y":3}, - {"label":"L34", "x":6, "y":3}, - {"label":"L31", "x":7, "y":3}, - {"label":"R31", "x":9, "y":3}, - {"label":"R33", "x":10, "y":3} + { "label": "L00", "x": 0, "y": 0 }, + { "label": "L01", "x": 1, "y": 0 }, + { "label": "L02", "x": 2, "y": 0 }, + { "label": "L03", "x": 3, "y": 0 }, + { "label": "L04", "x": 4, "y": 0 }, + { "label": "L05", "x": 5, "y": 0 }, + { "label": "R00", "x": 11, "y": 0 }, + { "label": "R01", "x": 12, "y": 0 }, + { "label": "R02", "x": 13, "y": 0 }, + { "label": "R03", "x": 14, "y": 0 }, + { "label": "R04", "x": 15, "y": 0 }, + { "label": "R05", "x": 16, "y": 0 }, + { "label": "L10", "x": 0, "y": 1 }, + { "label": "L11", "x": 1, "y": 1 }, + { "label": "L12", "x": 2, "y": 1 }, + { "label": "L13", "x": 3, "y": 1 }, + { "label": "L14", "x": 4, "y": 1 }, + { "label": "L15", "x": 5, "y": 1 }, + { "label": "R10", "x": 11, "y": 1 }, + { "label": "R11", "x": 12, "y": 1 }, + { "label": "R12", "x": 13, "y": 1 }, + { "label": "R13", "x": 14, "y": 1 }, + { "label": "R14", "x": 15, "y": 1 }, + { "label": "R15", "x": 16, "y": 1 }, + { "label": "L20", "x": 0, "y": 2 }, + { "label": "L21", "x": 1, "y": 2 }, + { "label": "L22", "x": 2, "y": 2 }, + { "label": "L23", "x": 3, "y": 2 }, + { "label": "L24", "x": 4, "y": 2 }, + { "label": "L25", "x": 5, "y": 2 }, + { "label": "R20", "x": 11, "y": 2 }, + { "label": "R21", "x": 12, "y": 2 }, + { "label": "R22", "x": 13, "y": 2 }, + { "label": "R23", "x": 14, "y": 2 }, + { "label": "R24", "x": 15, "y": 2 }, + { "label": "R25", "x": 16, "y": 2 }, + { "label": "L33", "x": 5, "y": 3 }, + { "label": "L34", "x": 6, "y": 3 }, + { "label": "L31", "x": 7, "y": 3 }, + { "label": "R31", "x": 9, "y": 3 }, + { "label": "R33", "x": 10, "y": 3 } ] }, "LAYOUT_split_3x6_3": { "layout": [ - {"label":"L00", "x":0, "y":0}, - {"label":"L01", "x":1, "y":0}, - {"label":"L02", "x":2, "y":0}, - {"label":"L03", "x":3, "y":0}, - {"label":"L04", "x":4, "y":0}, - {"label":"L05", "x":5, "y":0}, - {"label":"R00", "x":11, "y":0}, - {"label":"R01", "x":12, "y":0}, - {"label":"R02", "x":13, "y":0}, - {"label":"R03", "x":14, "y":0}, - {"label":"R04", "x":15, "y":0}, - {"label":"R05", "x":16, "y":0}, - {"label":"L10", "x":0, "y":1}, - {"label":"L11", "x":1, "y":1}, - {"label":"L12", "x":2, "y":1}, - {"label":"L13", "x":3, "y":1}, - {"label":"L14", "x":4, "y":1}, - {"label":"L15", "x":5, "y":1}, - {"label":"R10", "x":11, "y":1}, - {"label":"R11", "x":12, "y":1}, - {"label":"R12", "x":13, "y":1}, - {"label":"R13", "x":14, "y":1}, - {"label":"R14", "x":15, "y":1}, - {"label":"R15", "x":16, "y":1}, - {"label":"L20", "x":0, "y":2}, - {"label":"L21", "x":1, "y":2}, - {"label":"L22", "x":2, "y":2}, - {"label":"L23", "x":3, "y":2}, - {"label":"L24", "x":4, "y":2}, - {"label":"L25", "x":5, "y":2}, - {"label":"R20", "x":11, "y":2}, - {"label":"R21", "x":12, "y":2}, - {"label":"R22", "x":13, "y":2}, - {"label":"R23", "x":14, "y":2}, - {"label":"R24", "x":15, "y":2}, - {"label":"R25", "x":16, "y":2}, - {"label":"L33", "x":5, "y":3}, - {"label":"L34", "x":6, "y":3}, - {"label":"L31", "x":7, "y":3}, - {"label":"R33", "x":9, "y":3}, - {"label":"R34", "x":10, "y":3}, - {"label":"R31", "x":11, "y":3} + { "label": "L00", "x": 0, "y": 0 }, + { "label": "L01", "x": 1, "y": 0 }, + { "label": "L02", "x": 2, "y": 0 }, + { "label": "L03", "x": 3, "y": 0 }, + { "label": "L04", "x": 4, "y": 0 }, + { "label": "L05", "x": 5, "y": 0 }, + { "label": "R00", "x": 11, "y": 0 }, + { "label": "R01", "x": 12, "y": 0 }, + { "label": "R02", "x": 13, "y": 0 }, + { "label": "R03", "x": 14, "y": 0 }, + { "label": "R04", "x": 15, "y": 0 }, + { "label": "R05", "x": 16, "y": 0 }, + { "label": "L10", "x": 0, "y": 1 }, + { "label": "L11", "x": 1, "y": 1 }, + { "label": "L12", "x": 2, "y": 1 }, + { "label": "L13", "x": 3, "y": 1 }, + { "label": "L14", "x": 4, "y": 1 }, + { "label": "L15", "x": 5, "y": 1 }, + { "label": "R10", "x": 11, "y": 1 }, + { "label": "R11", "x": 12, "y": 1 }, + { "label": "R12", "x": 13, "y": 1 }, + { "label": "R13", "x": 14, "y": 1 }, + { "label": "R14", "x": 15, "y": 1 }, + { "label": "R15", "x": 16, "y": 1 }, + { "label": "L20", "x": 0, "y": 2 }, + { "label": "L21", "x": 1, "y": 2 }, + { "label": "L22", "x": 2, "y": 2 }, + { "label": "L23", "x": 3, "y": 2 }, + { "label": "L24", "x": 4, "y": 2 }, + { "label": "L25", "x": 5, "y": 2 }, + { "label": "R20", "x": 11, "y": 2 }, + { "label": "R21", "x": 12, "y": 2 }, + { "label": "R22", "x": 13, "y": 2 }, + { "label": "R23", "x": 14, "y": 2 }, + { "label": "R24", "x": 15, "y": 2 }, + { "label": "R25", "x": 16, "y": 2 }, + { "label": "L33", "x": 5, "y": 3 }, + { "label": "L34", "x": 6, "y": 3 }, + { "label": "L31", "x": 7, "y": 3 }, + { "label": "R33", "x": 9, "y": 3 }, + { "label": "R34", "x": 10, "y": 3 }, + { "label": "R31", "x": 11, "y": 3 } ] } } diff --git a/keyboards/bastardkb/charybdis/3x6/keymaps/default/config.h b/keyboards/bastardkb/charybdis/3x6/keymaps/default/config.h deleted file mode 100644 index 4b1bae3ca0..0000000000 --- a/keyboards/bastardkb/charybdis/3x6/keymaps/default/config.h +++ /dev/null @@ -1,54 +0,0 @@ -/** - * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#ifndef TAPPING_TERM -/** - * \brief Configure the global tapping term (default: 200ms). - * - * If you have a lot of accidental mod activations, crank up the tapping term. - * - * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term - */ -# define TAPPING_TERM 200 -#endif // TAPPING_TERM - -/* RGB Matrix. */ - -#ifdef RGB_MATRIX_ENABLE -// Disable control of RGB matrix by keycodes (must use firmware implementation -// to control the feature). -# define RGB_MATRIX_DISABLE_KEYCODES - -// Limit maximum brightness to keep power consumption reasonable, and avoid -// disconnects. -# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS -# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64 - -// Rainb |