1 files changed, 71 insertions, 0 deletions
diff --git a/keyboards/bastardkb/charybdis/3x6/keymaps/via/config.h b/keyboards/bastardkb/charybdis/3x6/keymaps/via/config.h
new file mode 100644
index 0000000000..abbf492089
--- /dev/null
+++ b/keyboards/bastardkb/charybdis/3x6/keymaps/via/config.h
@@ -0,0 +1,71 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#ifdef VIA_ENABLE
+/* VIA configuration. */
+#    define DYNAMIC_KEYMAP_LAYER_COUNT 4
+#endif // VIA_ENABLE
+
+/* Disable unused features. */
+#define NO_ACTION_ONESHOT
+
+#ifndef TAPPING_TERM
+/**
+ * \brief Configure the global tapping term (default: 200ms).
+ *
+ * If you have a lot of accidental mod activations, crank up the tapping term.
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term
+ */
+#    define TAPPING_TERM 200
+#endif // TAPPING_TERM
+
+/* Charybdis-specific features. */
+
+#ifdef POINTING_DEVICE_ENABLE
+// Automatically enable the pointer layer when moving the trackball.  See also:
+// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS`
+// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD`
+// #define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+#endif // POINTING_DEVICE_ENABLE
+
+/* RGB Matrix. */
+
+#ifdef RGB_MATRIX_ENABLE
+// Disable control of RGB matrix by keycodes (must use firmware implementation
+// to control the feature).
+#    define RGB_MATRIX_DISABLE_KEYCODES
+
+// Limit maximum brightness to keep power consumption reasonable, and avoid
+// disconnects.
+#    undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
+
+// Rainbow swirl as startup mode.
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+
+// Slow swirl at startup.
+#    define RGB_MATRIX_STARTUP_SPD 32
+
+// Startup values.
+#    define RGB_MATRIX_STARTUP_HUE 0
+#    define RGB_MATRIX_STARTUP_SAT 255
+#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
+#endif // RGB_MATRIX_ENABLE