diff options
Diffstat (limited to 'keyboards/ai03')
| -rw-r--r-- | keyboards/ai03/lunar/config.h | 10 | ||||
| -rw-r--r-- | keyboards/ai03/lunar/keymaps/muzfuz/keymap.c | 52 | ||||
| -rw-r--r-- | keyboards/ai03/lunar/keymaps/muzfuz/readme.md | 5 | ||||
| -rw-r--r-- | keyboards/ai03/lunar/keymaps/via/rules.mk | 3 | ||||
| -rw-r--r-- | keyboards/ai03/lunar/rules.mk | 52 | ||||
| -rw-r--r-- | keyboards/ai03/orbit/rules.mk | 64 | ||||
| -rw-r--r-- | keyboards/ai03/orbit/serial.c | 1 | ||||
| -rw-r--r-- | keyboards/ai03/quasar/rules.mk | 51 | ||||
| -rw-r--r-- | keyboards/ai03/soyuz/rules.mk | 51 |
9 files changed, 76 insertions, 213 deletions
diff --git a/keyboards/ai03/lunar/config.h b/keyboards/ai03/lunar/config.h index a9d1925546..f7f3262ac7 100644 --- a/keyboards/ai03/lunar/config.h +++ b/keyboards/ai03/lunar/config.h @@ -250,17 +250,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // EEPROM usage #define EEPROM_MAGIC 0x451F -#define EEPROM_MAGIC_ADDR 32 +#define EEPROM_MAGIC_ADDR 34 // Bump this every time we change what we store // This will automatically reset the EEPROM with defaults // and avoid loading invalid data from the EEPROM #define EEPROM_VERSION 0x08 -#define EEPROM_VERSION_ADDR 34 +#define EEPROM_VERSION_ADDR 36 // Dynamic keymap starts after EEPROM version -#define DYNAMIC_KEYMAP_EEPROM_ADDR 35 +#define DYNAMIC_KEYMAP_EEPROM_ADDR 37 // DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR = DYNAMIC_KEYMAP_EEPROM_ADDR + (DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2) -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 635 +#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 637 // DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE = 1024 - DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 389 +#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 387 #define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/ai03/lunar/keymaps/muzfuz/keymap.c b/keyboards/ai03/lunar/keymaps/muzfuz/keymap.c new file mode 100644 index 0000000000..4bbea42af0 --- /dev/null +++ b/keyboards/ai03/lunar/keymaps/muzfuz/keymap.c @@ -0,0 +1,52 @@ +#include QMK_KEYBOARD_H + +// Helpful defines +#define ESC_CTL CTL_T(KC_ESCAPE) // Tap for Esc, hold for Ctrl +#define FL_KCF LT(1,KC_F) +#define FL_KCJ LT(1,KC_J) +#define CMD_ENT LGUI(LSFT(KC_ENT)) + +enum custom_keycodes { + HASHRKT = SAFE_RANGE, + CLNEQLS, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSLS, LGUI(KC_C), + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, LGUI(KC_V), + ESC_CTL, KC_A, KC_S, KC_D, FL_KCF, KC_G, KC_H, FL_KCJ, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + CMD_ENT, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, MO(2), KC_GRV, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT( /* FL */ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, KC_VOLU, + _______, HASHRKT, _______, KC_LCBR, KC_RCBR, _______, _______, KC_UNDS, KC_PLUS, KC_PIPE, _______, _______, _______, _______, KC_VOLD, + _______, CLNEQLS, _______, KC_LBRC, KC_RBRC, _______, _______, KC_MINS, KC_EQL, KC_BSLS, KC_TILD, KC_GRV, _______, KC_HOME, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT( /* FN */ + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, _______, + KC_CAPS, _______, KC_UP, _______, _______, _______, KC_NLCK, KC_P7, KC_P8, KC_P9, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLD, KC_VOLU, KC_P4, KC_P5, KC_P6, _______, _______, _______, _______, + _______, KC_RCTL, KC_RGUI, KC_RALT, _______, _______, KC_P0, KC_P1, KC_P2, KC_P3, _______, _______, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch(keycode) { + case HASHRKT: + if (record->event.pressed) { + SEND_STRING("=>"); + } + break; + case CLNEQLS: + if (record->event.pressed) { + SEND_STRING(":="); + } + break; + } + return true; +} diff --git a/keyboards/ai03/lunar/keymaps/muzfuz/readme.md b/keyboards/ai03/lunar/keymaps/muzfuz/readme.md new file mode 100644 index 0000000000..f0fef09235 --- /dev/null +++ b/keyboards/ai03/lunar/keymaps/muzfuz/readme.md @@ -0,0 +1,5 @@ +# muzfuz's keymap for Lunar + +```shell +make ai03/lunar:muzfuz:dfu +``` diff --git a/keyboards/ai03/lunar/keymaps/via/rules.mk b/keyboards/ai03/lunar/keymaps/via/rules.mk index 7c10c3fbbd..01fcd55e8d 100644 --- a/keyboards/ai03/lunar/keymaps/via/rules.mk +++ b/keyboards/ai03/lunar/keymaps/via/rules.mk @@ -1,5 +1,4 @@ # MCU name -#MCU = at90usb1286 MCU = atmega32u4 # Processor frequency. @@ -83,4 +82,4 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) SRC += keyboards/wilba_tech/wt_main.c RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes
\ No newline at end of file +DYNAMIC_KEYMAP_ENABLE = yes diff --git a/keyboards/ai03/lunar/rules.mk b/keyboards/ai03/lunar/rules.mk index 8c2532574a..dd3d71baa9 100644 --- a/keyboards/ai03/lunar/rules.mk +++ b/keyboards/ai03/lunar/rules.mk @@ -1,64 +1,16 @@ # MCU name -#MCU = at90usb1286 MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/ai03/orbit/rules.mk b/keyboards/ai03/orbit/rules.mk index 4b40e47cb7..758a73cd2a 100644 --- a/keyboards/ai03/orbit/rules.mk +++ b/keyboards/ai03/orbit/rules.mk @@ -1,70 +1,16 @@ -SRC += split_util.c \ - split_flags.c \ - serial.c \ - transport.c \ - matrix.c - # MCU name -#MCU = at90usb1286 MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # @@ -89,4 +35,8 @@ USE_I2C = no # I2C for split communication CUSTOM_MATRIX = yes # For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c) # SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files - +SRC += split_util.c \ + split_flags.c \ + serial.c \ + transport.c \ + matrix.c diff --git a/keyboards/ai03/orbit/serial.c b/keyboards/ai03/orbit/serial.c index 1315377a34..636dfa0906 100644 --- a/keyboards/ai03/orbit/serial.c +++ b/keyboards/ai03/orbit/serial.c @@ -17,7 +17,6 @@ #include <stddef.h> #include <stdbool.h> #include "serial.h" -//#include <pro_micro.h> #ifdef SOFT_SERIAL_PIN diff --git a/keyboards/ai03/quasar/rules.mk b/keyboards/ai03/quasar/rules.mk index afbd1de147..6b67847791 100644 --- a/keyboards/ai03/quasar/rules.mk +++ b/keyboards/ai03/quasar/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/ai03/soyuz/rules.mk b/keyboards/ai03/soyuz/rules.mk index 5df789e581..f092cb35be 100644 --- a/keyboards/ai03/soyuz/rules.mk +++ b/keyboards/ai03/soyuz/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # |