8 files changed, 0 insertions, 170 deletions
diff --git a/keyboards/ai03/equinox/config.h b/keyboards/ai03/equinox/config.h
index 4fa440c2a3..2c3f9b4d15 100644
--- a/keyboards/ai03/equinox/config.h
+++ b/keyboards/ai03/equinox/config.h
@@ -74,27 +74,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ai03/jp60/config.h b/keyboards/ai03/jp60/config.h
index 2a617ceb08..38bbb08064 100644
--- a/keyboards/ai03/jp60/config.h
+++ b/keyboards/ai03/jp60/config.h
@@ -55,27 +55,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ai03/lunar/config.h b/keyboards/ai03/lunar/config.h
index 372ad2971f..81df49461f 100644
--- a/keyboards/ai03/lunar/config.h
+++ b/keyboards/ai03/lunar/config.h
@@ -70,27 +70,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ai03/lunar_ii/config.h b/keyboards/ai03/lunar_ii/config.h
index aa267f0965..1b02059356 100644
--- a/keyboards/ai03/lunar_ii/config.h
+++ b/keyboards/ai03/lunar_ii/config.h
@@ -26,29 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SOLENOID_PIN B7
 #define SOLENOID_DEFAULT_DWELL 15
 
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/ai03/orbit/config.h b/keyboards/ai03/orbit/config.h
index 97c4b70abb..be82b2fefe 100644
--- a/keyboards/ai03/orbit/config.h
+++ b/keyboards/ai03/orbit/config.h
@@ -81,27 +81,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ai03/orbit_x/config.h b/keyboards/ai03/orbit_x/config.h
index 6924737ba1..a6b7f2b908 100644
--- a/keyboards/ai03/orbit_x/config.h
+++ b/keyboards/ai03/orbit_x/config.h
@@ -65,27 +65,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ai03/quasar/config.h b/keyboards/ai03/quasar/config.h
index 3bf0e3e606..076a879a4c 100644
--- a/keyboards/ai03/quasar/config.h
+++ b/keyboards/ai03/quasar/config.h
@@ -76,27 +76,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ai03/soyuz/config.h b/keyboards/ai03/soyuz/config.h
index 70fcf59cd8..10ce68f9a1 100644
--- a/keyboards/ai03/soyuz/config.h
+++ b/keyboards/ai03/soyuz/config.h
@@ -70,27 +70,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */