diff options
Diffstat (limited to 'keyboards/1upkeyboards')
36 files changed, 467 insertions, 345 deletions
diff --git a/keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c b/keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c index 39473f6067..97bece94b3 100644 --- a/keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c +++ b/keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c @@ -17,6 +17,19 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Qwerty + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Backspace | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | + * |-----------------------------------------------------------------------------------------+ + * | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | GUI | Alt | Space | Alt | GUI | L1 | Ctrl | + * `-----------------------------------------------------------------------------------------' + */ [0] = LAYOUT_60_ansi( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, @@ -25,6 +38,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL ), + /* Function + * ,-----------------------------------------------------------------------------------------. + * | ` | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Del | + * |-----------------------------------------------------------------------------------------+ + * | | | Up | | | | | | | |PrtSc|ScrLk|Pause| | + * |-----------------------------------------------------------------------------------------+ + * | |Left |Down |Right| | | | | | Ins |Home |PgUp | | + * |-----------------------------------------------------------------------------------------+ + * | |VolUp|VolDn|VolMu| | | | | | End |PgDn | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | L2 | | | + * `-----------------------------------------------------------------------------------------' + */ [1] = LAYOUT_60_ansi( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, @@ -33,6 +59,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS ), + /* RGB + * ,-----------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | Reset | + * |-----------------------------------------------------------------------------------------+ + * | BL Tog |BLInc|BLDec|BLStp| | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | RGB Tog |Mode |Hue I|Sat I|Val I|Spd I|Plain|Breat|Rnbow|Swirl| | | | + * |-----------------------------------------------------------------------------------------+ + * | |RMode|Hue D|Sat D|Val D|Spd D|Snake|Knigh|Xmas |Gradi| | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | | + * `-----------------------------------------------------------------------------------------' + */ [2] = LAYOUT_60_ansi( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/1upkeyboards/1up60hse/keymaps/vosechu/config.h b/keyboards/1upkeyboards/1up60hse/keymaps/vosechu/config.h new file mode 100644 index 0000000000..65293382cf --- /dev/null +++ b/keyboards/1upkeyboards/1up60hse/keymaps/vosechu/config.h @@ -0,0 +1,19 @@ +/* Copyright 2018 Chuck "@vosechu" Lauer Vose + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/1upkeyboards/1up60hse/keymaps/vosechu/keymap.c b/keyboards/1upkeyboards/1up60hse/keymaps/vosechu/keymap.c new file mode 100644 index 0000000000..d5b9f901a4 --- /dev/null +++ b/keyboards/1upkeyboards/1up60hse/keymaps/vosechu/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2018 Chuck "@vosechu" Lauer Vose + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +#define SPACEFN LT(1, KC_SPC) +#define CTL_GRV CTL_T(KC_GRV) +#define ALT_TAB ALT_T(KC_TAB) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_60_ansi( + KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS , KC_EQL , KC_BSPC , + KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC , KC_RBRC , KC_BSLS , + KC_CAPS , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN , KC_QUOT , KC_ENT , + KC_LSFT , KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM , KC_DOT , KC_SLSH , KC_RSFT , + CTL_GRV , ALT_TAB , KC_LGUI , SPACEFN , KC_RALT , KC_RGUI , MO(1) , KC_RCTL + ), + + [1] = LAYOUT_60_ansi( + KC_GRV , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_DEL , + KC_TRNS , KC_TRNS , KC_UP , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_PSCR , KC_SLCK , KC_PAUS , KC_TRNS , + KC_TRNS , KC_LEFT , KC_DOWN , KC_RGHT , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_INS , KC_HOME , KC_PGUP , KC_TRNS , + KC_TRNS , KC_VOLU , KC_VOLD , KC_MUTE , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_END , KC_PGDN , KC_TRNS , + KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , MO(2) , KC_TRNS , KC_TRNS + ), + + [2] = LAYOUT_60_ansi( + KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , RESET , + BL_TOGG , BL_INC , BL_DEC , BL_STEP , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , + RGB_TOG , RGB_MOD , RGB_HUI , RGB_SAI , RGB_VAI , RGB_SPI , RGB_M_P , RGB_M_B , RGB_M_R , RGB_M_SW , KC_TRNS , KC_TRNS , KC_TRNS , + KC_TRNS , RGB_RMOD , RGB_HUD , RGB_SAD , RGB_VAD , RGB_SPD , RGB_M_SN , RGB_M_K , RGB_M_X , RGB_M_G , KC_TRNS , KC_TRNS , + KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS , KC_TRNS + ) +}; diff --git a/keyboards/1upkeyboards/1up60hse/keymaps/vosechu/readme.md b/keyboards/1upkeyboards/1up60hse/keymaps/vosechu/readme.md new file mode 100644 index 0000000000..97e9453b7c --- /dev/null +++ b/keyboards/1upkeyboards/1up60hse/keymaps/vosechu/readme.md @@ -0,0 +1,6 @@ +# 1up60hse keymap made by vosechu + +Tweaks from default + +* Add in SpaceFN so arrows are reachable with just left hand (leaving right free for mousing). +* Also add tab/grv under the alt/ctrl keys to make those easier to reach. diff --git a/keyboards/1upkeyboards/1up60hse/rules.mk b/keyboards/1upkeyboards/1up60hse/rules.mk index 72e6849e04..09caf0045a 100644 --- a/keyboards/1upkeyboards/1up60hse/rules.mk +++ b/keyboards/1upkeyboards/1up60hse/rules.mk @@ -1,52 +1,15 @@ # MCU name -#MCU = at90usb1286 MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/1upkeyboards/1up60hte/1up60hte.c b/keyboards/1upkeyboards/1up60hte/1up60hte.c index 460e42a0e5..3af0e9d400 100644 --- a/keyboards/1upkeyboards/1up60hte/1up60hte.c +++ b/keyboards/1upkeyboards/1up60hte/1up60hte.c @@ -16,3 +16,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "1up60hte.h" + +void keyboard_pre_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + setPinOutput(B6); + keyboard_pre_init_user(); +} + +void led_set_kb(uint8_t usb_led) { + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + writePinLow(B6); + } else { + writePinHigh(B6); + } + led_set_user(usb_led); +}
\ No newline at end of file diff --git a/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c b/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c index 359ac75406..2f91e1c76e 100644 --- a/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c +++ b/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c @@ -31,22 +31,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) }; - -void matrix_init_user(void) { - setPinOutput(B6); -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(B6); - } else { - writePinHigh(B6); - } -} diff --git a/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c b/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c index 5312e3b675..81e29ec191 100644 --- a/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c +++ b/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c @@ -31,22 +31,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) }; - -void matrix_init_user(void) { - setPinOutput(B6); -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(B6); - } else { - writePinHigh(B6); - } -} diff --git a/keyboards/1upkeyboards/1up60hte/readme.md b/keyboards/1upkeyboards/1up60hte/readme.md index 93767c541f..b49773fd77 100644 --- a/keyboards/1upkeyboards/1up60hte/readme.md +++ b/keyboards/1upkeyboards/1up60hte/readme.md @@ -8,7 +8,6 @@ A 60% PCB with USB C, RGB underglow, backlighting, hotswappable switches, and a Keyboard Maintainer: [Bubnick](https://github.com/bubnick) Hardware Supported: 1up60hte 60% PCB - Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/1upkeyboards/1up60hte/rules.mk b/keyboards/1upkeyboards/1up60hte/rules.mk index 860a754a64..d2bedea1b6 100644 --- a/keyboards/1upkeyboards/1up60hte/rules.mk +++ b/keyboards/1upkeyboards/1up60hte/rules.mk @@ -1,50 +1,20 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) @@ -54,6 +24,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https:/ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no RGBLIGHT_ENABLE = yes -EXTRAFLAGS += -flto LAYOUTS = 60_hhkb diff --git a/keyboards/1upkeyboards/1up60rgb/info.json b/keyboards/1upkeyboards/1up60rgb/info.json index 67f94b7fe1..2185f0bb19 100644 --- a/keyboards/1upkeyboards/1up60rgb/info.json +++ b/keyboards/1upkeyboards/1up60rgb/info.json @@ -14,7 +14,7 @@ }, "LAYOUT_60_iso": { - "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] + "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] }, "LAYOUT_60_ansi_split_bs_rshift": { diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c b/keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c index 8567b780a7..435a631815 100644 --- a/keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c +++ b/keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c @@ -18,15 +18,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - ; - - switch (id) { - - } - return MACRO_NONE; -} - void matrix_init_user(void) { } diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/iso/keymap.c b/keyboards/1upkeyboards/1up60rgb/keymaps/iso/keymap.c index 42fcb6cf9b..39edd00ff5 100644 --- a/keyboards/1upkeyboards/1up60rgb/keymaps/iso/keymap.c +++ b/keyboards/1upkeyboards/1up60rgb/keymaps/iso/keymap.c @@ -18,15 +18,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - ; - - switch (id) { - - } - return MACRO_NONE; -} - void matrix_init_user(void) { } diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/tsangan/keymap.c b/keyboards/1upkeyboards/1up60rgb/keymaps/tsangan/keymap.c index 485010eef1..0b0b51d595 100644 --- a/keyboards/1upkeyboards/1up60rgb/keymaps/tsangan/keymap.c +++ b/keyboards/1upkeyboards/1up60rgb/keymaps/tsangan/keymap.c @@ -18,15 +18,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - ; - - switch (id) { - - } - return MACRO_NONE; -} - void matrix_init_user(void) { } diff --git a/keyboards/1upkeyboards/1up60rgb/rules.mk b/keyboards/1upkeyboards/1up60rgb/rules.mk index 8b1cf6667f..98a1e93a1b 100644 --- a/keyboards/1upkeyboards/1up60rgb/rules.mk +++ b/keyboards/1upkeyboards/1up60rgb/rules.mk @@ -1,45 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. diff --git a/keyboards/1upkeyboards/super16/rules.mk b/keyboards/1upkeyboards/super16/rules.mk index 31042dfb81..07a403cc11 100644 --- a/keyboards/1upkeyboards/super16/rules.mk +++ b/keyboards/1upkeyboards/super16/rules.mk @@ -1,62 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 |