diff options
Diffstat (limited to 'keyboard/nerd')
| -rw-r--r-- | keyboard/nerd/Makefile | 126 | ||||
| -rw-r--r-- | keyboard/nerd/README.md | 52 | ||||
| -rw-r--r-- | keyboard/nerd/backlight.c | 81 | ||||
| -rw-r--r-- | keyboard/nerd/backlight.h | 40 | ||||
| -rw-r--r-- | keyboard/nerd/config.h | 49 | ||||
| -rw-r--r-- | keyboard/nerd/keymap_60_ansi150.c | 30 | ||||
| -rw-r--r-- | keyboard/nerd/keymap_80_ansi150.c | 33 | ||||
| -rw-r--r-- | keyboard/nerd/keymap_common.c | 29 | ||||
| -rw-r--r-- | keyboard/nerd/keymap_common.h | 89 | ||||
| -rw-r--r-- | keyboard/nerd/matrix.c | 221 |
10 files changed, 750 insertions, 0 deletions
diff --git a/keyboard/nerd/Makefile b/keyboard/nerd/Makefile new file mode 100644 index 0000000000..5fd382841f --- /dev/null +++ b/keyboard/nerd/Makefile @@ -0,0 +1,126 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = nerd_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + backlight.c + +ifdef LAYOUT + OPT_DEFS += -DNERD_LAYOUT_$(LAYOUT) +endif + +ifdef KEYMAP + SRC := keymap_$(LAYOUT)_$(KEYMAP).c $(SRC) +endif + +CONFIG_H = config.h + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 8000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/nerd/README.md b/keyboard/nerd/README.md new file mode 100644 index 0000000000..5b4acd3ba9 --- /dev/null +++ b/keyboard/nerd/README.md @@ -0,0 +1,52 @@ +NerD keyboard firmware +======================== + +Korean Keyboard designed by GON. + +*Note that this is not the official firmware* + + +Hardware revision +----------------- + +This firmware was developed and tested for NerD pcb version 1.61 and 2.0. + + +Supported features +------------------ + +* All layout options are supported +* All leds are supported +* 60% and 80% (TKL) pcbs are supported + + +Changing Bootloader +------------------- + +You can't simply just upload this firmware to a new NerD board because the original +bootloader won't accept DFU connections. + +You can change the bootloader of the keyboard with an ISP programmer of your choice. +The bootloader pins are easy to access on the NerD pcb. + +*Be aware that after changing the bootloader the official configuration software +won't work anymore and you'll lose your warrenty. GON won't provide any support for this firmware.* + + +Build +----- + +For building you have to specify two build-options, LAYOUT and KEYMAP. The layout option defines +pcb layout and can be either 60% or 80% at the momemnt. The keymap option selects your +preferred keymapping. + +Move to this directory then just run `make LAYOUT=60 KEYMAP=ansi150` + +to compile a firmware for a 60% pcb with ANSI 150 key mapping. + + +Jump to Bootloader +------------------ + +You can jump to bootloader by software if you have a macro defined for this in your keymap. The +default command is (LSFT+RSFT+PAUS) to access the bootloader by software jump. diff --git a/keyboard/nerd/backlight.c b/keyboard/nerd/backlight.c new file mode 100644 index 0000000000..2dc85c7532 --- /dev/null +++ b/keyboard/nerd/backlight.c @@ -0,0 +1,81 @@ +/* +Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include "backlight.h" +#include "led.h" + +void backlight_init_ports() +{ + DDRB |= 0b11100000; // PB7 (switch), PB6 (pcb), PB5 (caps) +} + +void led_set(uint8_t usb_led) +{ + (usb_led & (1<<USB_LED_CAPS_LOCK)) ? backlight_caps_enable() : backlight_caps_disable(); +} + +void backlight_set(uint8_t level) +{ + (level & BACKLIGHT_SWITCH) ? backlight_switch_enable() : backlight_switch_disable(); + (level & BACKLIGHT_PCB) ? backlight_pcb_enable() : backlight_pcb_disable(); +} + +void backlight_switch_enable() +{ + PORTB |= 0b10000000; +} + +void backlight_switch_disable() +{ + PORTB &= ~0b10000000; +} + +void backlight_switch_invert() +{ + PORTB ^= 0b10000000; +} + +void backlight_pcb_enable() +{ + PORTB |= 0b01000000; +} + +void backlight_pcb_disable() +{ + PORTB &= ~0b01000000; +} + +void backlight_pcb_invert() +{ + PORTB ^= 0b01000000; +} + +void backlight_caps_enable() +{ + PORTB |= 0b00100000; +} + +void backlight_caps_disable() +{ + PORTB &= ~0b00100000; +} + +void backlight_caps_invert() +{ + PORTB ^= 0b00100000; +} diff --git a/keyboard/nerd/backlight.h b/keyboard/nerd/backlight.h new file mode 100644 index 0000000000..4c75d9db65 --- /dev/null +++ b/keyboard/nerd/backlight.h @@ -0,0 +1,40 @@ +/* +Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef BACKLIGHT_H +#define BACKLIGHT_H + +enum backlight_level { + BACKLIGHT_SWITCH = 0b0000001, + BACKLIGHT_PCB = 0b0000010, +}; + +void backlight_init_ports(void); + +void backlight_switch_invert(void); +void backlight_switch_enable(void); +void backlight_switch_disable(void); + +void backlight_pcb_invert(void); +void backlight_pcb_enable(void); +void backlight_pcb_disable(void); + +void backlight_caps_invert(void); +void backlight_caps_enable(void); +void backlight_caps_disable(void); + +#endif // BACKLIGHT_H diff --git a/keyboard/nerd/config.h b/keyboard/nerd/config.h new file mode 100644 index 0000000000..ac2e6989d6 --- /dev/null +++ b/keyboard/nerd/config.h @@ -0,0 +1,49 @@ +/* +Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef CONFIG_H +#define CONFIG_H + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER GON +#define PRODUCT NerD +#define DESCRIPTION t.m.k. keyboard firmware for NerD + +/* key matrix size */ +#define MATRIX_ROWS 9 +#define MATRIX_COLS 10 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 2 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#endif diff --git a/keyboard/nerd/keymap_60_ansi150.c b/keyboard/nerd/keymap_60_ansi150.c new file mode 100644 index 0000000000..f85836ab55 --- /dev/null +++ b/keyboard/nerd/keymap_60_ansi150.c @@ -0,0 +1,30 @@ +#include "keymap_common.h" +#include "backlight.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0: Default */ + KEYMAP_ANSI150(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ + ESC, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, \ + LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT, \ + LCTL,LGUI,LALT, SPC, RALT,FN0 ,RCTL), + /* Layer 1: Space Fn */ + KEYMAP_ANSI150(TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, \ + TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS, FN1, TRNS,FN0, TRNS), + /* Layer 2: Functions */ + KEYMAP_ANSI150(SLEP,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, MUTE, \ + TRNS,BTN1,MS_U,BTN3,PSCR,SLCK,PAUS,HOME,INS, END, MPLY,VOLD,VOLU,FN3, \ + CAPS,MS_L,MS_D,MS_R,PGDN,TRNS,LEFT,DOWN,UP ,RGHT,MPRV,MNXT, FN2, \ + UP, TRNS,DEL, TRNS,TRNS,PGUP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + LEFT,DOWN,RGHT, TRNS, TRNS,TRNS,TRNS) +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(2), + [1] = ACTION_LAYER_TAP_KEY(2, KC_SPACE), + [2] = ACTION_LAYER_TOGGLE(1), + [3] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_SWITCH) +}; diff --git a/keyboard/nerd/keymap_80_ansi150.c b/keyboard/nerd/keymap_80_ansi150.c new file mode 100644 index 0000000000..72a7d83c9b --- /dev/null +++ b/keyboard/nerd/keymap_80_ansi150.c @@ -0,0 +1,33 @@ +#include "keymap_common.h" +#include "backlight.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0: Default */ + KEYMAP_ANSI150(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, \ + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, \ + CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, \ + LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT, UP, \ + LCTL,LGUI,LALT, SPC, RALT,FN0, RCTL, LEFT,DOWN,RGHT), + /* Layer 1: Space Fn */ + KEYMAP_ANSI150(TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, \ + ESC,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, \ + TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, \ + TRNS,TRNS,TRNS, FN1, TRNS,FN0, TRNS, TRNS,TRNS,TRNS), + /* Layer 2: Functions */ + KEYMAP_ANSI150(SLEP, MYCM,WSCH,WHOM,MAIL,VOLD,VOLU,MUTE,MSEL,MPLY,MPRV,MNXT,MSTP, TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,END, TRNS,TRNS,TRNS,TRNS,TRNS,HOME,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, \ + TRNS,BTN1,MS_U,BTN3,PSCR,SLCK,TRNS,TRNS,INS, TRNS,TRNS,TRNS,TRNS,FN3, TRNS,TRNS,TRNS, \ + CAPS,MS_L,MS_D,MS_R,PGDN,TRNS,LEFT,DOWN,UP ,RGHT,TRNS,TRNS, FN2, \ + TRNS, TRNS,DEL, TRNS,TRNS,PGUP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, \ + TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS), +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(2), + [1] = ACTION_LAYER_TAP_KEY(2, KC_SPACE), + [2] = ACTION_LAYER_TOGGLE(1), + [3] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_SWITCH) +}; diff --git a/keyboard/nerd/keymap_common.c b/keyboard/nerd/keymap_common.c new file mode 100644 index 0000000000..29ec4e53ef --- /dev/null +++ b/keyboard/nerd/keymap_common.c @@ -0,0 +1,29 @@ +/* +Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include "keymap_common.h" + +/* translates key to keycode */ +uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) +{ + return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); +} + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint8_t keycode) +{ + return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; +} diff --git a/keyboard/nerd/keymap_common.h b/keyboard/nerd/keymap_common.h new file mode 100644 index 0000000000..e116635918 --- /dev/null +++ b/keyboard/nerd/keymap_common.h @@ -0,0 +1,89 @@ +/* +Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef KEYMAP_COMMON_H +#define KEYMAP_COMMON_H + +#include <stdint.h> +#include <avr/pgmspace.h> +#include "keycode.h" +#include "action.h" +#include "action_macro.h" +#include "report.h" +#include "host.h" +#include "print.h" +#include "debug.h" +#include "keymap.h" + +extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; +extern const uint16_t fn_actions[]; + +#define KEYMAP( \ + K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \ + K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \ + K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \ + K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \ + K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, K86, \ + K06, K05, K78, K70, K72, K73, K74, K75, K76, K77, K87 \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09 }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19 }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29 }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39 }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49 }, \ + { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, KC_##K58, KC_##K59 }, \ + { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, KC_##K68, KC_##K69 }, \ + { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77, KC_##K78, KC_##K79 }, \ + { KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86, KC_##K87, KC_##K88, KC_##K89 } \ +} + +#ifdef NERD_LAYOUT_60 + #define KEYMAP_ANSI150( \ + K08, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, \ + K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, \ + K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K65, \ + K07, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, \ + K06, K05, K78, K70, K73, K74, K75 \ + ) KEYMAP( \ + K08, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \ + NO, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, NO, NO, NO, \ + K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, NO, NO, NO, \ + K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, NO, K65, \ + K07, NO, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, NO, NO, \ + K06, K05, K78, K70, NO, K73, K74, K75, NO, NO, NO \ + ) +#endif + +#ifdef NERD_LAYOUT_80 + #define KEYMAP_ANSI150( \ + K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \ + K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \ + K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \ + K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K65, \ + K07, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K86, \ + K06, K05, K78, K70, K73, K74, K75, K76, K77, K87 \ + ) KEYMAP( \ + K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \ + K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \ + K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \ + K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, NO, K65, \ + K07, NO, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, NO, K86, \ + K06, K05, K78, K70, NO, K73, K74, K75, K76, K77, K87 \ + ) +#endif + +#endif // KEYMAP_COMMON_H diff --git a/keyboard/nerd/matrix.c b/keyboard/nerd/matrix.c new file mode 100644 index 0000000000..eb5a9ab4f1 --- /dev/null +++ b/keyboard/nerd/matrix.c @@ -0,0 +1,221 @@ +/* +Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "backlight.h" + + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static uint16_t read_inputs(void); +static void init_inputs(void); +static void init_outputs(void); +static void reset_inputs(void); +static void reset_outputs(void); +static void select_output(uint8_t col); + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + backlight_init_ports(); + init_inputs(); + init_outputs(); + + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } +} + +uint8_t matrix_scan(void) +{ + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + reset_inputs(); + reset_outputs(); + select_output(col); + _delay_us(3); + uint16_t rows = read_inputs(); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col); + bool curr_bit = rows & (1<<row); + if (prev_bit != curr_bit) { + matrix_debouncing[row] ^= ((matrix_row_t)1<<col); + if (debouncing) { + dprint("bounce!: "); dprintf("%02X", debouncing); dprintln(); + } + debouncing = DEBOUNCE; + } + } + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + return 1; +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +static void init_inputs(void) +{ + DDRE &= ~0b01000000; // PE6 (Col 0) + DDRB &= ~0b00001111; // PB0 (Col 1), PB1 (Col 2), PB2 (Col 3), PB3 (Col 4) + DDRF &= ~0b00000001; // PF0 (Col 5) + DDRD &= ~0b00100011; // PD0 (Col 6), PD1 (Col 8 TKL), PD5 (Col 7) +} + +static uint16_t read_inputs(void) +{ + return (PINE&(1<<6) ? 0 : (1<<0)) | // PE6 (Col 0) + (PINB&(1<<0) ? 0 : (1<<1)) | // PB0 (Col 1) + (PINB&(1<<1) ? 0 : (1<<2)) | // PB1 (Col 2) + (PINB&(1<<2) ? 0 : (1<<3)) | // PB2 (Col 3) + (PINB&(1<<3) ? 0 : (1<<4)) | // PB3 (Col 4) + (PINF&(1<<0) ? 0 : (1<<5)) | // PF0 (Col 5) + (PIND&(1<<0) ? 0 : (1<<6)) | // PD0 (Col 6) + (PIND&(1<<5) ? 0 : (1<<7)) | // PD5 (Col 7) + (PIND&(1<<1) ? 0 : (1<<8)); // PD1 (Col 8 TKL) +} + +static void reset_inputs(void) +{ + PORTE |= 0b01000000; // PE6 (Col 0) + PORTB |= 0b00001111; // PB0 (Col 1), PB1 (Col 2), PB2 (Col 3), PB3 (Col 4) + PORTF |= 0b00000001; // PF0 (Col 5) + PORTD |= 0b00100011; // PD0 (Col 6), PD1 (Col 8 TKL), PD5 (Col 7) +} + +static void init_outputs(void) +{ + DDRB |= 0b00010000; // PB4 (Row 0) + DDRE |= 0b00000100; // PE2 (Row 1) + DDRF |= 0b11110010; // PF4 (Row 2), PF7 (Row 3), PF1 (Row 4), PF6 (Row 5), PF5 (Row 7) + DDRC |= 0b11000000; // PC6 (Row 6), PC7 (Row 9) + DDRD |= 0b10000000; // PD7 (Row 8) +} + +static void reset_outputs(void) +{ + PORTB |= 0b00010000; // PB4 (Row 0) + PORTE |= 0b00000100; // PE2 (Row 1) + PORTF |= 0b11110010; // PF4 (Row 2), PF7 (Row 3), PF1 (Row 4), PF6 (Row 5), PF5 (Row 7) + PORTC |= 0b11000000; // PC6 (Row 6), PC7 (Row 9) + PORTD |= 0b10000000; // PD7 (Row 8) +} + +static void select_output(uint8_t col) +{ + switch (col) { + case 0: + PORTB &= ~(1<<4); + break; + case 1: + PORTE &= ~(1<<2); + break; + case 2: + PORTF &= ~(1<<4); + break; + case 3: + PORTF &= ~(1<<7); + break; + case 4: + PORTF &= ~(1<<1); + break; + case 5: + PORTF &= ~(1<<6); + break; + case 6: + PORTC &= ~(1<<6); + break; + case 7: + PORTF &= ~(1<<5); + break; + case 8: + PORTD &= ~(1<<7); + break; + case 9: + PORTC &= ~(1<<7); + break; + } +} |