diff options
Diffstat (limited to 'drivers/awinic/aw20216.c')
| -rw-r--r-- | drivers/awinic/aw20216.c | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/drivers/awinic/aw20216.c b/drivers/awinic/aw20216.c new file mode 100644 index 0000000000..236c42a3cd --- /dev/null +++ b/drivers/awinic/aw20216.c @@ -0,0 +1,166 @@ +/* Copyright 2021 Jasper Chan + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "aw20216.h" +#include "spi_master.h" + +/* The AW20216 appears to be somewhat similar to the IS31FL743, although quite + * a few things are different, such as the command byte format and page ordering. + * The LED addresses start from 0x00 instead of 0x01. + */ +#define AWINIC_ID 0b1010 << 4 + +#define AW_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers +#define AW_PAGE_PWM 0x01 << 1 // PG1, LED PWM control +#define AW_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control +#define AW_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice? +#define AW_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control? + +#define AW_WRITE 0 +#define AW_READ 1 + +#define AW_REG_CONFIGURATION 0x00 // PG0 +#define AW_REG_GLOBALCURRENT 0x01 // PG0 + +// Default value of AW_REG_CONFIGURATION +// D7:D4 = 1011, SWSEL (SW1~SW12 active) +// D3 = 0?, reserved (apparently this should be 1 but it doesn't seem to matter) +// D2:D1 = 00, OSDE (open/short detection enable) +// D0 = 0, CHIPEN (write 1 to enable LEDs when hardware enable pulled high) +#define AW_CONFIG_DEFAULT 0b10110000 +#define AW_CHIPEN 1 + +#ifndef AW_SCALING_MAX +# define AW_SCALING_MAX 150 +#endif + +#ifndef AW_GLOBAL_CURRENT_MAX +# define AW_GLOBAL_CURRENT_MAX 150 +#endif + +#ifndef DRIVER_1_CS +# define DRIVER_1_CS B13 +#endif + +#ifndef DRIVER_1_EN +# define DRIVER_1_EN C13 +#endif + +uint8_t g_spi_transfer_buffer[20] = {0}; +aw_led g_pwm_buffer[DRIVER_LED_TOTAL]; +bool g_pwm_buffer_update_required[DRIVER_LED_TOTAL]; + +bool AW20216_write_register(pin_t slave_pin, uint8_t page, uint8_t reg, uint8_t data) { + // Do we need to call spi_stop() if this fails? + if (!spi_start(slave_pin, false, 0, 16)) { + return false; + } + + g_spi_transfer_buffer[0] = (AWINIC_ID | page | AW_WRITE); + g_spi_transfer_buffer[1] = reg; + g_spi_transfer_buffer[2] = data; + + if (spi_transmit(g_spi_transfer_buffer, 3) != SPI_STATUS_SUCCESS) { + spi_stop(); + return false; + } + spi_stop(); + return true; +} + +bool AW20216_init_scaling(void) { + // Set constant current to the max, control brightness with PWM + aw_led led; + for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { + led = g_aw_leds[i]; + if (led.driver == 0) { + AW20216_write_register(DRIVER_1_CS, AW_PAGE_SCALING, led.r, AW_SCALING_MAX); + AW20216_write_register(DRIVER_1_CS, AW_PAGE_SCALING, led.g, AW_SCALING_MAX); + AW20216_write_register(DRIVER_1_CS, AW_PAGE_SCALING, led.b, AW_SCALING_MAX); + } +#ifdef DRIVER_2_CS + else if (led.driver == 1) { + AW20216_write_register(DRIVER_2_CS, AW_PAGE_SCALING, led.r, AW_SCALING_MAX); + AW20216_write_register(DRIVER_2_CS, AW_PAGE_SCALING, led.g, AW_SCALING_MAX); + AW20216_write_register(DRIVER_2_CS, AW_PAGE_SCALING, led.b, AW_SCALING_MAX); + } +#endif + } + return true; +} + +bool AW20216_soft_enable(void) { + AW20216_write_register(DRIVER_1_CS, AW_PAGE_FUNCTION, AW_REG_CONFIGURATION, AW_CONFIG_DEFAULT | AW_CHIPEN); +#ifdef DRIVER_2_CS + AW20216_write_register(DRIVER_2_CS, AW_PAGE_FUNCTION, AW_REG_CONFIGURATION, AW_CONFIG_DEFAULT | AW_CHIPEN); +#endif + return true; +} + +void AW20216_update_pwm(int index, uint8_t red, uint8_t green, uint8_t blue) { + aw_led led = g_aw_leds[index]; + if (led.driver == 0) { + AW20216_write_register(DRIVER_1_CS, AW_PAGE_PWM, led.r, red); + AW20216_write_register(DRIVER_1_CS, AW_PAGE_PWM, led.g, green); + AW20216_write_register(DRIVER_1_CS, AW_PAGE_PWM, led.b, blue); + } +#ifdef DRIVER_2_CS + else if (led.driver == 1) { + AW20216_write_register(DRIVER_2_CS, AW_PAGE_PWM, led.r, red); + AW20216_write_register(DRIVER_2_CS, AW_PAGE_PWM, led.g, green); + AW20216_write_register(DRIVER_2_CS, AW_PAGE_PWM, led.b, blue); + } +#endif + return; +} + +void AW20216_init(void) { + // All LEDs should start with all scaling and PWM registers as off + setPinOutput(DRIVER_1_EN); + writePinHigh(DRIVER_1_EN); + AW20216_write_register(DRIVER_1_CS, AW_PAGE_FUNCTION, AW_REG_GLOBALCURRENT, AW_GLOBAL_CURRENT_MAX); +#ifdef DRIVER_2_EN + setPinOutput(DRIVER_2_EN); + writePinHigh(DRIVER_2_EN); + AW20216_write_register(DRIVER_2_CS, AW_PAGE_FUNCTION, AW_REG_GLOBALCURRENT, AW_GLOBAL_CURRENT_MAX); +#endif + AW20216_init_scaling(); + AW20216_soft_enable(); + return; +} + +void AW20216_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + g_pwm_buffer[index].r = red; + g_pwm_buffer[index].g = green; + g_pwm_buffer[index].b = blue; + g_pwm_buffer_update_required[index] = true; + return; +} +void AW20216_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { + for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { + AW20216_set_color(i, red, green, blue); + } + return; +} +void AW20216_update_pwm_buffers(void) { + for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { + if (g_pwm_buffer_update_required[i]) { + AW20216_update_pwm(i, g_pwm_buffer[i].r, g_pwm_buffer[i].g, g_pwm_buffer[i].b); + g_pwm_buffer_update_required[i] = false; + } + } + return; +} |