diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/feature_pointing_device.md | 47 | ||||
| -rw-r--r-- | docs/features.md | 2 |
2 files changed, 48 insertions, 1 deletions
diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md new file mode 100644 index 0000000000..1ba8f7759e --- /dev/null +++ b/docs/feature_pointing_device.md @@ -0,0 +1,47 @@ +## Pointing Device + +Pointing Device is a generic name for a feature intended to be generic: moving the system pointer arround. There are certainly other options for it - like mousekeys - but this aims to be easily modifiable and lightweight. You can implement custom keys to control functionality, or you can gather information from other peripherals and insert it directly here - let QMK handle the processing for you. + +To enable Pointing Device, uncomment the following line in your rules.mk: + +``` +POINTING_DEVICE_ENABLE = yes +``` + +To manipulate the mouse report, you can use the following functions: + +* `pointing_device_get_report()` - Returns the current report_mouse_t that represents the information sent to the host computer +* `pointing_device_set_report(report_mouse_t newMouseReport)` - Overrides and saves the report_mouse_t to be sent to the host computer + +Keep in mind that a report_mouse_t (here "mouseReport") has the following properties: + +* `mouseReport.x` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing movement (+ to the right, - to the left) on the x axis. +* `mouseReport.y` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing movement (+ upward, - downward) on the y axis. +* `mouseReport.v` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing vertical scrolling (+ upward, - downward). +* `mouseReport.h` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing horizontal scrolling (+ right, - left). +* `mouseReport.buttons` - this is a uint8_t in which the last 5 bits are used. These bits represent the mouse button state - bit 3 is mouse button 5, and bit 7 is mouse button 1. + +When the mouse report is sent, the x, y, v, and h values are set to 0 (this is done in "pointing_device_send()", which can be overridden to avoid this behavior). This way, button states persist, but movement will only occur once. For further customization, both `pointing_device_init` and `pointing_device_task` can be overridden. + +In the following example, a custom key is used to click the mouse and scroll 127 units vertically and horizontally, then undo all of that when released - because that's a totally useful function. Listen, this is an example: + +``` +case MS_SPECIAL: + report_mouse_t currentReport = pointing_device_get_report(); + if (record->event.pressed) + { + currentReport.v = 127; + currentReport.h = 127; + currentReport.buttons |= MOUSE_BTN1; //this is defined in report.h + } + else + { + currentReport.v = -127; + currentReport.h = -127; + currentReport.buttons &= ~MOUSE_BTN1; + } + pointing_device_set_report(currentReport); + break; +``` + +Recall that the mouse report is set to zero (except the buttons) whenever it is sent, so the scrolling would only occur once in each case.
\ No newline at end of file diff --git a/docs/features.md b/docs/features.md index c5965f4c0e..2ef4361563 100644 --- a/docs/features.md +++ b/docs/features.md @@ -102,4 +102,4 @@ case MACRO_RAISED: update_tri_layer(LAYER_LOWER, LAYER_RAISED, LAYER_ADJUST); } break; -``` +```
\ No newline at end of file |