summaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/faq_build.md4
-rw-r--r--docs/faq_debug.md68
-rw-r--r--docs/faq_keymap.md63
-rw-r--r--docs/fr-fr/faq_build.md4
-rw-r--r--docs/fr-fr/faq_debug.md71
-rw-r--r--docs/fr-fr/faq_keymap.md67
-rw-r--r--docs/zh-cn/faq_build.md5
-rw-r--r--docs/zh-cn/faq_debug.md68
-rw-r--r--docs/zh-cn/faq_keymap.md63
9 files changed, 3 insertions, 410 deletions
diff --git a/docs/faq_build.md b/docs/faq_build.md
index 4c91cb28b1..b2e448306a 100644
--- a/docs/faq_build.md
+++ b/docs/faq_build.md
@@ -87,10 +87,6 @@ Re-running the QMK installation script (`./util/qmk_install.sh` from the `qmk_fi
If that doesn't work, then you may need to download and run Zadig. See [Bootloader Driver Installation with Zadig](driver_installation_zadig.md) for more detailed information.
-## WINAVR is Obsolete
-It is no longer recommended and may cause some problem.
-See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
-
## USB VID and PID
You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.
diff --git a/docs/faq_debug.md b/docs/faq_debug.md
index 1e0cdc82bf..6c66defbd4 100644
--- a/docs/faq_debug.md
+++ b/docs/faq_debug.md
@@ -112,56 +112,6 @@ In C `1` means one of [int] type which is [16 bit] in case of AVR so you can't s
http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279
-
-## Bootloader Jump Doesn't Work
-Properly configure bootloader size in **Makefile**. With wrong section size bootloader won't probably start with **Magic command** and **Boot Magic**.
-```
-# Size of Bootloaders in bytes:
-# Atmel DFU loader(ATmega32U4) 4096
-# Atmel DFU loader(AT90USB128) 8192
-# LUFA bootloader(ATmega32U4) 4096
-# Arduino Caterina(ATmega32U4) 4096
-# USBaspLoader(ATmega***) 2048
-# Teensy halfKay(ATmega32U4) 512
-# Teensy++ halfKay(AT90USB128) 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-```
-AVR Boot section size are defined by setting **BOOTSZ** fuse in fact. Consult with your MCU datasheet.
-Note that **Word**(2 bytes) size and address are used in datasheet while TMK uses **Byte**.
-
-AVR Boot section is located at end of Flash memory like the followings.
-```
-byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286)
-0x0000 +---------------+ 0x00000 +---------------+
- | | | |
- | | | |
- | Application | | Application |
- | | | |
- = = = =
- | | 32KB-4KB | | 128KB-8KB
-0x6000 +---------------+ 0x1E000 +---------------+
- | Bootloader | 4KB | Bootloader | 8KB
-0x7FFF +---------------+ 0x1FFFF +---------------+
-
-
-byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286)
-0x0000 +---------------+ 0x00000 +---------------+
- | | | |
- | | | |
- | Application | | Application |
- | | | |
- = = = =
- | | 32KB-512B | | 128KB-2KB
-0x7E00 +---------------+ 0x1FC00 +---------------+
- | Bootloader | 512B | Bootloader | 2KB
-0x7FFF +---------------+ 0x1FFFF +---------------+
-```
-
-And see this discussion for further reference.
-https://github.com/tmk/tmk_keyboard/issues/179
-
-If you are using a TeensyUSB, there is a [known bug](https://github.com/qmk/qmk_firmware/issues/164) in which the hardware reset button prevents the RESET key from working. Unplugging the keyboard and plugging it back in should resolve the problem.
-
## Special Extra Key Doesn't Work (System, Audio Control Keys)
You need to define `EXTRAKEY_ENABLE` in `rules.mk` to use them in QMK.
@@ -194,24 +144,6 @@ If you would like to keep JTAG enabled, just add the following to your `config.h
#define NO_JTAG_DISABLE
```
-## Adding LED Indicators of Lock Keys
-You need your own LED indicators for CapsLock, ScrollLock and NumLock? See this post.
-
-http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p191560
-
-## Program Arduino Micro/Leonardo
-Push reset button and then run command like this within 8 seconds.
-
-```
-avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:adb_usb.hex -P/dev/ttyACM0
-```
-
-Device name will vary depending on your system.
-
-http://arduino.cc/en/Main/ArduinoBoardMicro
-https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867
-
-
## USB 3 Compatibility
I heard some people have a problem with USB 3 port, try USB 2 port.
diff --git a/docs/faq_keymap.md b/docs/faq_keymap.md
index 84d8548d46..2d00e8bef9 100644
--- a/docs/faq_keymap.md
+++ b/docs/faq_keymap.md
@@ -67,24 +67,8 @@ After enabling this feature use keycodes `KC_LCAP`, `KC_LNUM` and `KC_LSCR` in y
Old vintage mechanical keyboards occasionally have lock switches but modern ones don't have. ***You don't need this feature in most case and just use keycodes `KC_CAPS`, `KC_NLCK` and `KC_SLCK`.***
## Input Special Characters Other Than ASCII like Cédille 'Ç'
-NO UNIVERSAL METHOD TO INPUT THOSE WORKS OVER ALL SYSTEMS. You have to define **MACRO** in way specific to your OS or layout.
-See this post for example **MACRO** code.
-
-http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p195620
-
-On **Windows** you can use `AltGr` key or **Alt code**.
-* http://en.wikipedia.org/wiki/AltGr_key
-* http://en.wikipedia.org/wiki/Alt_code
-
-On **Mac** OS defines `Option` key combinations.
-* http://en.wikipedia.org/wiki/Option_key#Alternative_keyboard_input
-
-On **Xorg** you can use `compose` key, instead.
-* http://en.wikipedia.org/wiki/Compose_key
-
-And see this for **Unicode** input.
-* http://en.wikipedia.org/wiki/Unicode_input
+See the [Unicode](feature_unicode.md) feature.
## `Fn` Key on macOS
@@ -130,51 +114,6 @@ https://github.com/tekezo/Karabiner/issues/403
See the [Grave Escape](feature_grave_esc.md) feature.
-## Arrow on Right Modifier Keys with Dual-Role
-This turns right modifier keys into arrow keys when the keys are tapped while still modifiers when the keys are hold. In TMK the dual-role function is dubbed **TAP**.
-```
-
-#include "keymap_common.h"
-
-
-/* Arrow keys on right modifier keys with TMK dual role feature
- *
- * https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#213-modifier-with-tap-keydual-role
- * https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
- */
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: qwerty */
- [0] = LAYOUT( \
- ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS,BSPC, \
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \
- LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \
- LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, ESC, \
- FN4, LGUI,LALT, SPC, APP, FN2, FN1, FN3),
- [1] = LAYOUT( \
- GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,TRNS, \
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN5, TRNS, \
- TRNS,TRNS,TRNS, TRNS, TRNS,FN7, FN6, FN8),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP),
- [1] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN),
- [2] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT),
- [3] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT),
- [4] = ACTION_LAYER_MOMENTARY(1),
- [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_PGUP),
- [6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_PGDN),
- [7] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_HOME),
- [8] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_END),
-};
-
-```
-
-Dual-role key: https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
-
-
## Eject on Mac OSX
`KC_EJCT` keycode works on OSX. https://github.com/tmk/tmk_keyboard/issues/250
It seems Windows 10 ignores the code and Linux/Xorg recognizes but has no mapping by default.
diff --git a/docs/fr-fr/faq_build.md b/docs/fr-fr/faq_build.md
index 6fba1e4304..448ff01aab 100644
--- a/docs/fr-fr/faq_build.md
+++ b/docs/fr-fr/faq_build.md
@@ -86,10 +86,6 @@ Relancer le script d'installation de QMK (`./util/qmk_install.sh` situé dans r
Si vous rencontrez toujours des problèmes, essayez de télécharger et lancer Zadig. Voir [Installation du driver du bootloader avec Zadig](driver_installation_zadig.md) pour plus d'informations.
-## WINAVR est obsolète
-
-Il n'est plus recommandé et peut causer des problèmes. Voir [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
-
## USB VID et PID
Vous pouvez utiliser l'ID de votre choix en modifier `config.h`. Il y a peu de chance de conflit avec d'autres produits.
diff --git a/docs/fr-fr/faq_debug.md b/docs/fr-fr/faq_debug.md
index 7a85fd1f24..754c79921c 100644
--- a/docs/fr-fr/faq_debug.md
+++ b/docs/fr-fr/faq_debug.md
@@ -104,58 +104,6 @@ En C, `1` implique un type [int] qui est [16 bits] pour les AVR, ce qui implique
http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279
-## Bootloader Jump ne fonctionne pas
-
-Configurez correctement la taille du bootloader dans le **Makefile**. Une mauvaise taille de section du bootloader empêchera probablement le démarrage avec **Magic command** et **Boot Magic**.
-
-```
-# Size of Bootloaders in bytes:
-# Atmel DFU loader(ATmega32U4) 4096
-# Atmel DFU loader(AT90USB128) 8192
-# LUFA bootloader(ATmega32U4) 4096
-# Arduino Caterina(ATmega32U4) 4096
-# USBaspLoader(ATmega***) 2048
-# Teensy halfKay(ATmega32U4) 512
-# Teensy++ halfKay(AT90USB128) 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-```
-
-La taille de la section de démarrage de AVR est définie par l'option **BOOTSZ** fuse. Vérifiez la fiche technique du MCU. Veuilez noter que les tailles et adresses sont définies en **Word** (2 octets) dans la fiche technique alors que TMK utilise des **Byte**.
-
-La section de boot AVR se trouve à la fin de la mémoire flash, comme suit.
-
-```
-byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286)
-0x0000 +---------------+ 0x00000 +---------------+
- | | | |
- | | | |
- | Application | | Application |
- | | | |
- = = = =
- | | 32KB-4KB | | 128KB-8KB
-0x6000 +---------------+ 0x1E000 +---------------+
- | Bootloader | 4KB | Bootloader | 8KB
-0x7FFF +---------------+ 0x1FFFF +---------------+
-
-
-byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286)
-0x0000 +---------------+ 0x00000 +---------------+
- | | | |
- | | | |
- | Application | | Application |
- | | | |
- = = = =
- | | 32KB-512B | | 128KB-2KB
-0x7E00 +---------------+ 0x1FC00 +---------------+
- | Bootloader | 512B | Bootloader | 2KB
-0x7FFF +---------------+ 0x1FFFF +---------------+
-```
-
-Référez-vous à cette discussion pour plus de référence.
-https://github.com/tmk/tmk_keyboard/issues/179
-
-Si vous utilisez un TeensyUSB, il y a un [bug connu](https://github.com/qmk/qmk_firmware/issues/164) qui fait que le bouton reset matériel empêche la touche RESET de fonctionner. Débrancher et rebrancher le clavier devrait résoudre le problème.
-
## Les touches spéciales ne fonctionnent pas (Touche Système, Touches de contrôle du son)
Vous devez définir `EXTRAKEY_ENABLE` dans le fichier `rules.mk` pour les utiliser dans QMK.
@@ -189,25 +137,6 @@ Si vous voulez garder JTAG activé, ajoutez la ligne suivante à votre fichier `
#define NO_JTAG_DISABLE
```
-## Adding LED Indicators of Lock Keys
-
-Si vous souhaitez votre propre indicateur LED pour CapsLock, ScrollLock et NumLock alors lisez ce post.
-
-http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p191560
-
-## Programmer Arduino Micro/Leonardo
-
-Appuyez sur le bouton reset puis lancez la commande suivante dans les 8 secondes.
-
-```
-avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:adb_usb.hex -P/dev/ttyACM0
-```
-
-Le nom du périphérique peut varier en fonction de votre système.
-
-http://arduino.cc/en/Main/ArduinoBoardMicro
-https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867
-
## Compatibilité USB 3
Il semble que certaines personnes ont eu des problèmes avec les ports USB 3, essayez un port USB 2.
diff --git a/docs/fr-fr/faq_keymap.md b/docs/fr-fr/faq_keymap.md
index 8244d4225f..2cbbe93082 100644
--- a/docs/fr-fr/faq_keymap.md
+++ b/docs/fr-fr/faq_keymap.md
@@ -72,24 +72,7 @@ Des vieux claviers mécaniques ont parfois des touches à verrouillage, mais les
## Ajouter des caractères spéciaux autres que ASCII comme la cédille 'Ç'
-IL N'EXISTE AUCUNE METHODE UNIVERSELLE POUR LES AJOUTER QUI FONCTIONNE SUR TOUS LES SYSTEMES. Vous devez définir une **MACRO** d'une manière spécifique à votre OS ou layout.
-
-Voir ce post pour un exemple de code **MACRO**.
-
-http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p195620
-
-Sous **Windows** vous pouvez utiliser la touche `AltGr` ou **Alt code**.
-* http://en.wikipedia.org/wiki/AltGr_key
-* http://en.wikipedia.org/wiki/Alt_code
-
-Sous **Mac OS** définissez une combinaison de touche `Option`.
-* http://en.wikipedia.org/wiki/Option_key#Alternative_keyboard_input
-
-Sous **Xorg** vous pouvez utiliser une touche `compose` à la place.
-* http://en.wikipedia.org/wiki/Compose_key
-
-Et voir ceci pour une entrée **Unicode**.
-* http://en.wikipedia.org/wiki/Unicode_input
+Voir la fonctionnalité [Unicode](feature_unicode.md).
## Touche `Fn` sur macOS
@@ -144,54 +127,6 @@ Cette fonctionnalité permet d'utiliser une touche à la fois comme touche Écha
Voir la fonctionnalité [Grave Escape](feature_grave_esc.md).
-## Avoir les touches modificatrices qui ont double usage en flèches directionnelles.
-
-Ceci transforme les touches "modificateur droit" en touches fléchées lorsque les touches sont seulement "tapées" tout en restant des modificateurs lorsqu'elles sont maintenues.
-
-Dans TMK la fonction double rôle s'appelle **TAP**.
-
-```C
-
-#include "keymap_common.h"
-
-
-/* Arrow keys on right modifier keys with TMK dual role feature
- *
- * https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#213-modifier-with-tap-keydual-role
- * https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
- */
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: qwerty */
- [0] = LAYOUT( \
- ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS,BSPC, \
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \
- LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \
- LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, ESC, \
- FN4, LGUI,LALT, SPC, APP, FN2, FN1, FN3),
- [1] = LAYOUT( \
- GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,TRNS, \
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN5, TRNS, \
- TRNS,TRNS,TRNS, TRNS, TRNS,FN7, FN6, FN8),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP),
- [1] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN),
- [2] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT),
- [3] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT),
- [4] = ACTION_LAYER_MOMENTARY(1),
- [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_PGUP),
- [6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_PGDN),
- [7] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_HOME),
- [8] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_END),
-};
-
-```
-
-Touches double rôle : https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
-
## Eject sur Mac OSX
Le keycode`KC_EJCT` fonctionne sous OSX. https://github.com/tmk/tmk_keyboard/issues/250
diff --git a/docs/zh-cn/faq_build.md b/docs/zh-cn/faq_build.md
index 2f33fbca97..82d0697a86 100644
--- a/docs/zh-cn/faq_build.md
+++ b/docs/zh-cn/faq_build.md
@@ -56,11 +56,6 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666"
?> 事实上没有一个驱动的最佳选择,有些选项就是和某些系统相辅相成。但libUSB和WinUSB似乎也算是这里的最佳选择了。
如果bootloader在设备列表中没有显示,你可能要使能 "List all devices"选项在选项菜单中`Options`,然后找到有问题的bootloader设备。(译者注:在win10中可能为 查看-显示隐藏的设备)
-
-## WINAVR已淘汰
-不再推荐使用WINAVR,使用可能会导致问题
-详情请见[TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
-
## USB VID 和 PID
你可以在编辑`config.h`时使用任何你想用的ID值。实际上,使用任何可能未使用的ID都没有问题,除了有极低的与其他产品发生冲突的可能性。
diff --git a/docs/zh-cn/faq_debug.md b/docs/zh-cn/faq_debug.md
index a3cc7c510c..7eff7f2651 100644
--- a/docs/zh-cn/faq_debug.md
+++ b/docs/zh-cn/faq_debug.md
@@ -101,56 +101,6 @@ https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switc
http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279
-
-## Bootloader跳转不好用
-在**Makefile**中正确配置**Makefile**大小。如果分区大小不正确,引导加载程序可能无法从**Magic command**和**Boot Magic**加载。
-```
-# bootloader字节数:
-# Atmel DFU loader(ATmega32U4) 4096
-# Atmel DFU loader(AT90USB128) 8192
-# LUFA bootloader(ATmega32U4) 4096
-# Arduino Caterina(ATmega32U4) 4096
-# USBaspLoader(ATmega***) 2048
-# Teensy halfKay(ATmega32U4) 512
-# Teensy++ halfKay(AT90USB128) 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-```
-AVR引导大小是通过**BOOTSZ**熔丝位来设置的。查阅你单片机的datasheet。
-记住,datasheet用的是**Word**(2字节)表示大小和地址,TMK用的是**Byte**。
-
-AVR引导部分位于闪存的末尾,如下所示(Application是应用区,Bootloader是引导区)。
-```
-byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286)
-0x0000 +---------------+ 0x00000 +---------------+
- | | | |
- | | | |
- | Application | | Application |
- | | | |
- = = = =
- | | 32KB-4KB | | 128KB-8KB
-0x6000 +---------------+ 0x1E000 +---------------+
- | Bootloader | 4KB | Bootloader | 8KB
-0x7FFF +---------------+ 0x1FFFF +---------------+
-
-
-byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286)
-0x0000 +---------------+ 0x00000 +---------------+
- | | | |
- | | | |
- | Application | | Application |
- | | | |
- = = = =
- | | 32KB-512B | | 128KB-2KB
-0x7E00 +---------------+ 0x1FC00 +---------------+
- | Bootloader | 512B | Bootloader | 2KB
-0x7FFF +---------------+ 0x1FFFF +---------------+
-```
-
-详情请见下方issue。
-https://github.com/tmk/tmk_keyboard/issues/179
-
-如果你使用TeensyUSB, 有一个[已知bug](https://github.com/qmk/qmk_firmware/issues/164)硬件重置按钮阻止软件定义重置键工作。重新插拔键盘就好了。
-
## 特殊额外键不起作用(系统,音频控制键)
你要在`rules.mk`定义`EXTRAKEY_ENABLE`在QMK中使用它们。
@@ -173,24 +123,6 @@ EXTRAKEY_ENABLE = yes # 音频控制和系统控制
Arduino Leonardo和micro使用**ATMega32U4**,该芯片TMK可用,但Arduino的bootloader会导致问题。
-## 为锁定键添加指示灯
-你要自制CapsLock, ScrollLock 和 NumLock指示灯?见下文。
-
-http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p191560
-
-## 为Arduino Micro/Leonardo编程
-按下重置键然后在8秒内运行下方这样的命令。
-
-```
-avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:adb_usb.hex -P/dev/ttyACM0
-```
-
-设备名称因系统而异。
-
-http://arduino.cc/en/Main/ArduinoBoardMicro
-https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867
-
-
## USB 3 兼容性
据传说有些人用USB3接口会有问题,用USB2的试试。
diff --git a/docs/zh-cn/faq_keymap.md b/docs/zh-cn/faq_keymap.md
index ee8e3c06bf..7fb434b4c8 100644
--- a/docs/zh-cn/faq_keymap.md
+++ b/docs/zh-cn/faq_keymap.md
@@ -66,24 +66,8 @@ https://github.com/tmk/tmk_keyboard/issues/67
远古机械键盘偶尔会有自锁机械开关,现在几乎没有了。***大多数情况下你不需要使用该功能,且要使用`KC_CAPS`, `KC_NLCK`和`KC_SLCK`这三个键码。***
## 输入ASCII之外的特殊字符比如Cédille 'Ç'
-没有在所有系统中输入这个的通用方法。你要定义针对你的特定操作系统或布局的**宏**。
-比如看这个**宏**代码的文章。
-
-http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p195620
-<!--翻译问题:下方维基百科链接应全部替换为中文链接,暂未找到全部-->
-在**Windows**上,可以用`AltGr`键或**Alt码**。
-* http://en.wikipedia.org/wiki/AltGr_key
-* https://zh.wikipedia.org/wiki/Alt%E7%A0%81
-
-在**Mac OS**定义`Option`键组合。
-* https://zh.wikipedia.org/wiki/Option%E9%94%AE#%E6%9B%BF%E4%BB%A3%E9%94%AE%E7%9B%98%E8%BE%93%E5%85%A5
-
-在**Xorg**可以改用`compose`键。
-* http://en.wikipedia.org/wiki/Compose_key
-
-下方链接查看**Unicode**输入。
-* http://en.wikipedia.org/wiki/Unicode_input
+请见[Unicode](feature_unicode.md)功能。
## macOS上的`Fn`
@@ -136,51 +120,6 @@ https://github.com/tekezo/Karabiner/issues/403
请见[Grave Escape](feature_grave_esc.md)功能。
-## 右侧双角色修改键(诸如Shift、Alt等有修改其他键作用的键)变箭头键
-右侧修改键单击时会变为箭头键,长按就还是修改键。在TMK中双角色键称之为**TAP**.
-```
-
-#include "keymap_common.h"
-
-
-/* 用TMK双角色键功能实现右侧修改键改箭头键
- *
- * https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#213-modifier-with-tap-keydual-role
- * https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
- */
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: qwerty */
- [0] = LAYOUT( \
- ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS,BSPC, \
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \
- LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \
- LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, ESC, \
- FN4, LGUI,LALT, SPC, APP, FN2, FN1, FN3),
- [1] = LAYOUT( \
- GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,TRNS, \
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN5, TRNS, \
- TRNS,TRNS,TRNS, TRNS, TRNS,FN7, FN6, FN8),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP),
- [1] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN),
- [2] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT),
- [3] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT),
- [4] = ACTION_LAYER_MOMENTARY(1),
- [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_PGUP),
- [6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_PGDN),
- [7] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_HOME),
- [8] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_END),
-};
-
-```
-
-双角色键说明: https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
-
-
## Mac OSX的弹出键
`KC_EJCT` 键码在OSX可以使用 https://github.com/tmk/tmk_keyboard/issues/250
似乎Windows10会忽略该键码,Linux/Xorg可以识别该键码但默认不映射。