diff options
Diffstat (limited to 'docs/flashing.md')
| -rw-r--r-- | docs/flashing.md | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/docs/flashing.md b/docs/flashing.md index 00350b8406..18ae6364d4 100644 --- a/docs/flashing.md +++ b/docs/flashing.md @@ -232,4 +232,6 @@ Flashing sequence: There are a number of DFU commands that you can use to flash firmware to a STM32 device: * `:dfu-util` - The default command for flashing to STM32 devices. -* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. +* `:dfu-util-split-left` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Left Side" EEPROM setting for split keyboards. +* `:dfu-util-split-right` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Right Side" EEPROM setting for split keyboards. +* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. |