diff options
Diffstat (limited to 'common/avr/bootloader.c')
| -rw-r--r-- | common/avr/bootloader.c | 148 |
1 files changed, 148 insertions, 0 deletions
diff --git a/common/avr/bootloader.c b/common/avr/bootloader.c new file mode 100644 index 0000000000..cda295b181 --- /dev/null +++ b/common/avr/bootloader.c @@ -0,0 +1,148 @@ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <avr/interrupt.h> +#include <avr/wdt.h> +#include <util/delay.h> +#include "bootloader.h" + +#ifdef PROTOCOL_LUFA +#include <LUFA/Drivers/USB/USB.h> +#endif + + +/* Boot Section Size in *BYTEs* + * Teensy halfKay 512 + * Teensy++ halfKay 1024 + * Atmel DFU loader 4096 + * LUFA bootloader 4096 + * USBaspLoader 2048 + */ +#ifndef BOOTLOADER_SIZE +#warning To use bootloader_jump() you need to define BOOTLOADER_SIZE in config.h. +#define BOOTLOADER_SIZE 4096 +#endif + +#define FLASH_SIZE (FLASHEND + 1L) +#define BOOTLOADER_START (FLASH_SIZE - BOOTLOADER_SIZE) + + +/* + * Entering the Bootloader via Software + * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html + */ +#define BOOTLOADER_RESET_KEY 0xB007B007 +uint32_t reset_key __attribute__ ((section (".noinit"))); + +/* initialize MCU status by watchdog reset */ +void bootloader_jump(void) { +#ifdef PROTOCOL_LUFA + USB_Disable(); + cli(); + _delay_ms(2000); +#endif + +#ifdef PROTOCOL_PJRC + cli(); + UDCON = 1; + USBCON = (1<<FRZCLK); + UCSR1B = 0; + _delay_ms(5); +#endif + + // watchdog reset + reset_key = BOOTLOADER_RESET_KEY; + wdt_enable(WDTO_250MS); + for (;;); +} + + +/* this runs before main() */ +void bootloader_jump_after_watchdog_reset(void) __attribute__ ((used, naked, section (".init3"))); +void bootloader_jump_after_watchdog_reset(void) +{ + if ((MCUSR & (1<<WDRF)) && reset_key == BOOTLOADER_RESET_KEY) { + reset_key = 0; + + // My custom USBasploader requires this to come up. + MCUSR = 0; + + // Seems like Teensy halfkay loader requires clearing WDRF and disabling watchdog. + MCUSR &= ~(1<<WDRF); + wdt_disable(); + + // This is compled into 'icall', address should be in word unit, not byte. + ((void (*)(void))(BOOTLOADER_START/2))(); + } +} + + +#if 0 +/* Jumping To The Bootloader + * http://www.pjrc.com/teensy/jump_to_bootloader.html + * + * This method doen't work when using LUFA. idk why. + * - needs to initialize more regisers or interrupt setting? + */ +void bootloader_jump(void) { +#ifdef PROTOCOL_LUFA + USB_Disable(); + cli(); + _delay_ms(2000); +#endif + +#ifdef PROTOCOL_PJRC + cli(); + UDCON = 1; + USBCON = (1<<FRZCLK); + UCSR1B = 0; + _delay_ms(5); +#endif + + /* + * Initialize + */ +#if defined(__AVR_AT90USB162__) + EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; + TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0; + DDRB = 0; DDRC = 0; DDRD = 0; + PORTB = 0; PORTC = 0; PORTD = 0; +#elif defined(__AVR_ATmega32U4__) + EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0; + TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0; + DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0; + PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0; +#elif defined(__AVR_AT90USB646__) + EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0; + TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0; + DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; + PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0; +#elif defined(__AVR_AT90USB1286__) + EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0; + TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0; + DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; + PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0; +#endif + + /* + * USBaspLoader + */ +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) + // This makes custom USBasploader come up. + MCUSR = 0; + + // initialize ports + PORTB = 0; PORTC= 0; PORTD = 0; + DDRB = 0; DDRC= 0; DDRD = 0; + + // disable interrupts + EIMSK = 0; EECR = 0; SPCR = 0; + ACSR = 0; SPMCSR = 0; WDTCSR = 0; PCICR = 0; + TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; + ADCSRA = 0; TWCR = 0; UCSR0B = 0; +#endif + + // This is compled into 'icall', address should be in word unit, not byte. + ((void (*)(void))(BOOTLOADER_START/2))(); +} +#endif |