diff options
Diffstat (limited to 'Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt')
-rw-r--r-- | Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt | 71 |
1 files changed, 71 insertions, 0 deletions
diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt new file mode 100644 index 0000000000..9eba4ed864 --- /dev/null +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt @@ -0,0 +1,71 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Joystick Host With HID Descriptor Parser Demo + * + * \section Sec_Compat Demo Compatibility: + * + * The following list indicates what microcontrollers are compatible with this demo. + * + * \li Series 7 USB AVRs (AT90USBxxx7) + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this demo. + * + * <table> + * <tr> + * <td><b>USB Mode:</b></td> + * <td>Host</td> + * </tr> + * <tr> + * <td><b>USB Class:</b></td> + * <td>Human Interface Device (HID)</td> + * </tr> + * <tr> + * <td><b>USB Subclass:</b></td> + * <td>N/A</td> + * </tr> + * <tr> + * <td><b>Relevant Standards:</b></td> + * <td>USBIF HID Specification \n + * USBIF HID Usage Tables</td> + * </tr> + * <tr> + * <td><b>Supported USB Speeds:</b></td> + * <td>Low Speed Mode \n + * Full Speed Mode</td> + * </tr> + * </table> + * + * \section Sec_Description Project Description: + * + * Joystick host demonstration application. This gives a simple reference + * application for implementing a USB Joystick host, for USB joysticks using + * the standard joystick HID profile. It uses a HID parser for the HID + * reports, allowing for correct operation across all USB joysticks. This + * demo supports joysticks with a single HID report. + * + * Joystick movement and button presses are displayed on the board LEDs. + * On connection to a USB joystick, the report items will be processed and + * printed as a formatted list through the USART before the joystick is + * fully enumerated. + * + * Currently only single interface joysticks are supported. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * + * <table> + * <tr> + * <td> + * None + * </td> + * </tr> + * </table> + */ + |