3 files changed, 333 insertions, 333 deletions
diff --git a/Bootloaders/MassStorage/BootloaderAPITable.S b/Bootloaders/MassStorage/BootloaderAPITable.S
index 30165700d7..44eb15ea9d 100644
--- a/Bootloaders/MassStorage/BootloaderAPITable.S
+++ b/Bootloaders/MassStorage/BootloaderAPITable.S
@@ -1,102 +1,102 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2017.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-#if AUX_BOOT_SECTION_SIZE > 0
-#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).
-
-; Trampoline to jump over the AUX bootloader section to the start of the bootloader,
-; on devices where an AUX bootloader section is used.
-.section .boot_aux_trampoline, "ax"
-.global Boot_AUX_Trampoline
-Boot_AUX_Trampoline:
-	jmp BOOT_START_ADDR
-#endif
-
-; Trampolines to actual API implementations if the target address is outside the
-; range of a rjmp instruction (can happen with large bootloader sections)
-.section .apitable_trampolines, "ax"
-.global BootloaderAPI_Trampolines
-BootloaderAPI_Trampolines:
-
-	BootloaderAPI_ErasePage_Trampoline:
-		jmp BootloaderAPI_ErasePage
-	BootloaderAPI_WritePage_Trampoline:
-		jmp BootloaderAPI_WritePage
-	BootloaderAPI_FillWord_Trampoline:
-		jmp BootloaderAPI_FillWord
-	BootloaderAPI_ReadSignature_Trampoline:
-		jmp BootloaderAPI_ReadSignature
-	BootloaderAPI_ReadFuse_Trampoline:
-		jmp BootloaderAPI_ReadFuse
-	BootloaderAPI_ReadLock_Trampoline:
-		jmp BootloaderAPI_ReadLock
-	BootloaderAPI_WriteLock_Trampoline:
-		jmp BootloaderAPI_WriteLock
-	BootloaderAPI_UNUSED1:
-		ret
-	BootloaderAPI_UNUSED2:
-		ret
-	BootloaderAPI_UNUSED3:
-		ret
-	BootloaderAPI_UNUSED4:
-		ret
-	BootloaderAPI_UNUSED5:
-		ret
-
-
-
-; API function jump table
-.section .apitable_jumptable, "ax"
-.global BootloaderAPI_JumpTable
-BootloaderAPI_JumpTable:
-
-	rjmp BootloaderAPI_ErasePage_Trampoline
-	rjmp BootloaderAPI_WritePage_Trampoline
-	rjmp BootloaderAPI_FillWord_Trampoline
-	rjmp BootloaderAPI_ReadSignature_Trampoline
-	rjmp BootloaderAPI_ReadFuse_Trampoline
-	rjmp BootloaderAPI_ReadLock_Trampoline
-	rjmp BootloaderAPI_WriteLock_Trampoline
-	rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
-	rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
-	rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
-	rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
-	rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
-
-
-
-; Bootloader table signatures and information
-.section .apitable_signatures, "ax"
-.global BootloaderAPI_Signatures
-BootloaderAPI_Signatures:
-
-	.long BOOT_START_ADDR ; Start address of the bootloader
-	.word 0xDF30 ; Signature for the MS class bootloader, V1
-	.word 0xDCFB ; Signature for a LUFA class bootloader
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+#if AUX_BOOT_SECTION_SIZE > 0
+#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).
+
+; Trampoline to jump over the AUX bootloader section to the start of the bootloader,
+; on devices where an AUX bootloader section is used.
+.section .boot_aux_trampoline, "ax"
+.global Boot_AUX_Trampoline
+Boot_AUX_Trampoline:
+	jmp BOOT_START_ADDR
+#endif
+
+; Trampolines to actual API implementations if the target address is outside the
+; range of a rjmp instruction (can happen with large bootloader sections)
+.section .apitable_trampolines, "ax"
+.global BootloaderAPI_Trampolines
+BootloaderAPI_Trampolines:
+
+	BootloaderAPI_ErasePage_Trampoline:
+		jmp BootloaderAPI_ErasePage
+	BootloaderAPI_WritePage_Trampoline:
+		jmp BootloaderAPI_WritePage
+	BootloaderAPI_FillWord_Trampoline:
+		jmp BootloaderAPI_FillWord
+	BootloaderAPI_ReadSignature_Trampoline:
+		jmp BootloaderAPI_ReadSignature
+	BootloaderAPI_ReadFuse_Trampoline:
+		jmp BootloaderAPI_ReadFuse
+	BootloaderAPI_ReadLock_Trampoline:
+		jmp BootloaderAPI_ReadLock
+	BootloaderAPI_WriteLock_Trampoline:
+		jmp BootloaderAPI_WriteLock
+	BootloaderAPI_UNUSED1:
+		ret
+	BootloaderAPI_UNUSED2:
+		ret
+	BootloaderAPI_UNUSED3:
+		ret
+	BootloaderAPI_UNUSED4:
+		ret
+	BootloaderAPI_UNUSED5:
+		ret
+
+
+
+; API function jump table
+.section .apitable_jumptable, "ax"
+.global BootloaderAPI_JumpTable
+BootloaderAPI_JumpTable:
+
+	rjmp BootloaderAPI_ErasePage_Trampoline
+	rjmp BootloaderAPI_WritePage_Trampoline
+	rjmp BootloaderAPI_FillWord_Trampoline
+	rjmp BootloaderAPI_ReadSignature_Trampoline
+	rjmp BootloaderAPI_ReadFuse_Trampoline
+	rjmp BootloaderAPI_ReadLock_Trampoline
+	rjmp BootloaderAPI_WriteLock_Trampoline
+	rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
+	rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
+	rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
+	rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
+	rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
+
+
+
+; Bootloader table signatures and information
+.section .apitable_signatures, "ax"
+.global BootloaderAPI_Signatures
+BootloaderAPI_Signatures:
+
+	.long BOOT_START_ADDR ; Start address of the bootloader
+	.word 0xDF30 ; Signature for the MS class bootloader, V1
+	.word 0xDCFB ; Signature for a LUFA class bootloader
diff --git a/Bootloaders/MassStorage/asf.xml b/Bootloaders/MassStorage/asf.xml
index f1d550d1eb..700ffa26ff 100644
--- a/Bootloaders/MassStorage/asf.xml
+++ b/Bootloaders/MassStorage/asf.xml
@@ -1,156 +1,156 @@
-<asf xmlversion="1.0">
-	<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
-		<require idref="lufa.bootloaders.mass_storage"/>
-		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
-
-		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
-
-		<config name="config.compiler.optimization.level" value="size"/>
-
-		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
-
-		<build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
-
-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
-
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
-
-	<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
-		<require idref="lufa.bootloaders.mass_storage"/>
-		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
-
-		<device-support value="at90usb647"/>
-		<config name="lufa.drivers.board.name" value="none"/>
-
-		<config name="config.compiler.optimization.level" value="size"/>
-
-		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
-
-		<build type="define" name="BOOT_START_ADDR" value="0xE000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
-
-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
-
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
-
-	<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
-		<require idref="lufa.bootloaders.mass_storage"/>
-		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
-
-		<device-support value="atmega32u4"/>
-		<config name="lufa.drivers.board.name" value="none"/>
-
-		<config name="config.compiler.optimization.level" value="size"/>
-
-		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
-
-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
-
-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
-		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
-
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
-
-	<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
-		<require idref="lufa.bootloaders.mass_storage"/>
-		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
-
-		<device-support value="atmega16u2"/>
-		<config name="lufa.drivers.board.name" value="none"/>
-
-		<config name="config.compiler.optimization.level" value="size"/>
-
-		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
-
-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
-
-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
-		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
-
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
-
-	<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
-		<info type="description" value="summary">
-		Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
-		</info>
-
- 		<info type="gui-flag" value="move-to-root"/>
-
-		<info type="keyword" value="Technology">
-			<keyword value="Bootloaders"/>
-			<keyword value="USB Device"/>
-		</info>
-
-		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
-
-		<build type="include-path" value="."/>
-		<build type="c-source" value="BootloaderMassStorage.c"/>
-		<build type="header-file" value="BootloaderMassStorage.h"/>
-		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="Descriptors.h"/>
-		<build type="c-source" value="BootloaderAPI.c"/>
-		<build type="header-file" value="BootloaderAPI.h"/>
-		<build type="asm-source" value="BootloaderAPITable.S"/>
-
-		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
-
-		<build type="include-path" value="Lib"/>
-		<build type="header-file" value="Lib/VirtualFAT.h"/>
-		<build type="c-source" value="Lib/VirtualFAT.c"/>
-		<build type="header-file" value="Lib/SCSI.h"/>
-		<build type="c-source" value="Lib/SCSI.c"/>
-
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
-
-		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
-	</module>
-</asf>
+<asf xmlversion="1.0">
+	<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xE000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
+		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
+		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
+		<info type="description" value="summary">
+		Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderMassStorage.c"/>
+		<build type="header-file" value="BootloaderMassStorage.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
+
+		<build type="include-path" value="Lib"/>
+		<build type="header-file" value="Lib/VirtualFAT.h"/>
+		<build type="c-source" value="Lib/VirtualFAT.c"/>
+		<build type="header-file" value="Lib/SCSI.h"/>
+		<build type="c-source" value="Lib/SCSI.c"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/Bootloaders/MassStorage/makefile b/Bootloaders/MassStorage/makefile
index 7f0ec82a7f..f3948e754f 100644
--- a/Bootloaders/MassStorage/makefile
+++ b/Bootloaders/MassStorage/makefile
@@ -1,75 +1,75 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2017.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = BootloaderMassStorage
-SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
-LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
-
-# Flash size and bootloader section sizes of the target, in KB. These must
-# match the target's total FLASH size and the bootloader size set in the
-# device's fuses.
-FLASH_SIZE_KB         = 128
-BOOT_SECTION_SIZE_KB  = 8
-
-# Bootloader address calculation formulas
-# Do not modify these macros, but rather modify the dependent values above.
-CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )
-BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
-BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
-
-# Bootloader linker section flags for relocating the API table sections to
-# known FLASH addresses - these should not normally be user-edited.
-BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
-BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
-BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)
-BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)
-
-# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the
-# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum
-# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.
-ifeq ($(BOOT_SECTION_SIZE_KB),8)
-  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE=0
-else
-  AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))
-
-  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'
-  LD_FLAGS           += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))
-  LD_FLAGS           += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)
-endif
-
-# Default target
-all:
-
-# Include LUFA-specific DMBS extension modules
-DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
-include $(DMBS_LUFA_PATH)/lufa-sources.mk
-include $(DMBS_LUFA_PATH)/lufa-gcc.mk
-
-# Include common DMBS build system modules
-DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
-include $(DMBS_PATH)/core.mk
-include $(DMBS_PATH)/cppcheck.mk
-include $(DMBS_PATH)/doxygen.mk
-include $(DMBS_PATH)/dfu.mk
-include $(DMBS_PATH)/gcc.mk
-include $(DMBS_PATH)/hid.mk
-include $(DMBS_PATH)/avrdude.mk
-include $(DMBS_PATH)/atprogram.mk
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = BootloaderMassStorage
+SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
+LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
+
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
+FLASH_SIZE_KB         = 128
+BOOT_SECTION_SIZE_KB  = 8
+
+# Bootloader address calculation formulas
+# Do not modify these macros, but rather modify the dependent values above.
+CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )
+BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
+BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
+
+# Bootloader linker section flags for relocating the API table sections to
+# known FLASH addresses - these should not normally be user-edited.
+BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
+BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
+BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)
+BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)
+
+# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the
+# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum
+# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.
+ifeq ($(BOOT_SECTION_SIZE_KB),8)
+  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE=0
+else
+  AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))
+
+  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'
+  LD_FLAGS           += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))
+  LD_FLAGS           += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)
+endif
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk