summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--keyboard/hhkb/Makefile.tmk129
-rw-r--r--keyboard/hhkb/README.md162
-rw-r--r--keyboard/hhkb/config.h2
-rw-r--r--keyboard/hhkb/doc/HHKB.txt36
-rw-r--r--keyboard/hhkb/doc/Power.txt48
-rw-r--r--keyboard/hhkb/led.c9
-rw-r--r--keyboard/hhkb/matrix.c61
7 files changed, 355 insertions, 92 deletions
diff --git a/keyboard/hhkb/Makefile.tmk b/keyboard/hhkb/Makefile.tmk
new file mode 100644
index 0000000000..d3730081ff
--- /dev/null
+++ b/keyboard/hhkb/Makefile.tmk
@@ -0,0 +1,129 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = hhkb_tmk
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC += keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
+
+debug-on: EXTRAFLAGS += -DDEBUG
+debug-on: all
diff --git a/keyboard/hhkb/README.md b/keyboard/hhkb/README.md
index f7e96126bc..b9e0b534a2 100644
--- a/keyboard/hhkb/README.md
+++ b/keyboard/hhkb/README.md
@@ -2,128 +2,144 @@ Alternative Controller for HHKB Pro
===================================
I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and
firmware source code is not open, of course. This means customizing this keyboard needs to replace original
-controller with programmable one. For this purpose I used PJRC [Teensy++][Teensy] as alternative controller.
+controller with programmable one. This controller can work with HHKB Professional and Professional 2 model.
+
+See [this thread][AltController] in geekhack.org.
[HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/
+[AltController]: http://geekhack.org/index.php?topic=12047.0
[Teensy]: http://www.pjrc.com/teensy/
-My keyboard firmware source tree is here: http://github.com/tmk/tmk_keyboard
-See directory keyboard/hhkb to build firmware for HHKB.
-
-
##Features
* Customizable keymap
* More keymap layers(more Fn keys)
* Mouse keys
* USB NKRO
+See README of [tmk_keyboard] for more.
+
+[tmk_keyboard]: http://github.com/tmk/tmk_keyboard
+
###Pros
+* No risk: Everything is all reversible
* Without PCB trace cutting, case mod or any destructives
* Can keep original controller intact
* Can change all HHKB behaviour as you like
###Cons
* Void your warranty
-* Lose USB hub function in case of Pro2
+* Lose USB hub function of Pro2
##DISCLAIMER
-I'm not a professional of electronics or MCU programming. This may damage your HHKB.
+I'm not a professional of electronics nor MCU programming. This may damage your HHKB.
And my English writing is poor, I'm not sure I can convey my notions accurately.
+##Documents
+See [doc/HHKB.txt](doc/HHKB.txt) and files under [doc/](doc/) for internal of HHKB and this controller.
+##Build Firmware & Program
+You can choose some combination of hardware and USB protocol stack([LUFA], [PJRC]).
+### Install Tools
+See [this document](../../doc/build.md).
-##Build Firmware
-You can choose some combination of MCU and USB protocol stack.
-
-### Teensy++(AVR USB family) with [LUFA]
-0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail.
-
-1. Edit **keymap.c** to use your favoirte keymap.
-
-2. Edit **Makefile** if you want to use other `MCU` than Teensy++ 2.0.
+### TMK Alt Controller Board
+ $ make -f Makefile.tmk
-3. Build firmware binary file:
- `$ make -f Makefile.lufa`
+This programs the controller with [dfu-programmer] if the tool is intalled and configured properly.
-4. Program MCU with PJRC [Teensy Loader] tool. If you install command line version of the loader just run:
- `$ make -f Makefile.lufa teensy`
+ $ make -f Makefile.tmk dfu
-[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
-[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
+Push reset button and program with [FLIP]. The tool should be intalled and configured properly.
+ $ make -f Makefile.tmk flip
-###AVR Mega with [V-USB]
-Follow below if you want to use AVR with V-USB as .
+Or you can also program with FLIP GUI.
-0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail.
+[dfu-programmer]: http://dfu-programmer.sourceforge.net/
+[FLIP]: http://www.atmel.com/tools/FLIP.aspx
-1. Edit **keymap.c** to use your favoirte keymap.
-2. Edit **usbconfig.h** to configure V-USB options.
+### PJRC Teensy++
+Build with [LUFA] USB stack:
-3. Edit **Makefile.vusb** to define `MCU` and `F_CPU`.
+ $ make -f Makefile.lufa
-4. Build firmware binary file:
- `$ make -f Makefile.vusb`
+or with [PJRC] USB stack:
-5. Program MCU with AVR programmer like AVRISPmkII. If you already have [USBaspLoader] on MCU just run:
- `$ make -f Makefile.vusb program`
+ $ make -f Makefile.pjrc
-[V-USB]: http://www.obdev.at/products/vusb/index.html
-[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html
+Push reset button and program with [Teensy Loader(command line)]. The tool should be intalled and configured properly.
+ $ make -f Makefile.lufa teensy
+ $ make -f Makefile.pjrc teensy
-###How to Customize Keymap
-Later...
-See **keymap.c**.
+Or you can also program with [Teensy Loader(GUI)].
+[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
+[PJRC]: http://www.pjrc.com/teensy/usb_keyboard.html
+[Teensy Loader(command line)]: http://www.pjrc.com/teensy/loader_cli.html
+[Teensy Loader(GUI)]: http://www.pjrc.com/teensy/loader.html
-##Hardware
-###Teensy++ installation
-Angled USB mini B adapter is used to install Teensy++ laterally.
+###AVR Mega with [V-USB]
+Build:
+ $ make -f Makefile.vusb
-![Image of Teensy install](hhkb/doc/HHKB_img/teensy_install.jpg)
+Program [USBaspLoader] on MCU with AVR programmer like [AVRISPmkII] and tool like [avrdude].
-Bread baord wires are used to connect Teensy++.
+You can programs with [avrdude] once you have programmed [USBaspLoader] on MCU.
+ $ make -f Makefile.vusb program
-![Image of Teensy wiring](hhkb/doc/HHKB_img/teensy_wiring.jpg)
+[AVRISPmkII]: http://www.atmel.com/tools/AVRISPMKII.aspx
+[avrdude]: http://www.nongnu.org/avrdude/
-![Image of Connector](hhkb/doc/HHKB_img/connector_contact.jpg)
+##How to Customize
+See [tmk_keyboard] documents.
-###PJRC Teensy++ 2.0 connection
- +---------------+
- | Teensy++ |
- | |
- | | HHKB
- | | ~~~~
- | PB0-2|------->ROW(6-8)
- | PB3-5|------->COL(9-11)
- | PB6|------->ENABLE(12)
- | PE6|<-------KEY(4)
- | PE7|------->PREV(5)
- | |
- | |
- | |
- +---------------+
+##Hardware
+You have some options for hardware. Development boards with USB AVR family(ATMega32U4, AT90USB1286) like Teensy will work while MegaAVR with V-USB library is also cheapear option for DIY.
+
+###1. TMK Alt Controller Board
+TMK designed [Keyboard Controller Board for HHKB Pro2(KiCad project)](https://github.com/tmk/HHKB_controller).
+See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923).
+
+
+###2. PJRC Teensy++ 2.0 connection
+ +---------------+
+ | Teensy++ |
+ | |
+ | | HHKB pro HHKB pro2
+ | | ~~~~~~~~ ~~~~~~~~~
+ | PB0-2|------->ROW (6-8) (5-7)
+ | PB3-5|------->COL (9-11) (8-10)
+ | PB6|------->ENABLE (12) (11)
+ | PE6|<-------KEY (4) (3)
+ | PE7|------->PREV (5) (4)
+ | |
+ | | 5V--- (1-3) (1-2)
+ | | GND--- (13-14) (12-13)
+ +---------------+
+
+- NOTE: PJRC [Teensy](http://www.pjrc.com/teensy/)
+[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
-###V-USB circuit
+###3. V-USB connection
+---+ +---------------+
- USB GND | | ATmega168 |
+ USB GND | | ATmega328p |
~~~ C3 | |
- 5V <-------+--------+---|Vcc,AVCC | HHKB
- R1 | | ~~~~
- D- <----+--+-----R2-----|INT1 PB2-4|------->ROW(6-8)
- D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11)
- Z1 Z2 | PC3|------->ENABLE(12)
- GND<----+---+-----------|GND PB0|<-------KEY(4)
- | PB1|------->PREV(5)
+ 5V <-------+--------+---|Vcc,AVCC | HHKB pro pro2
+ R1 | | ~~~~~~~~ ~~~~
+ D- <----+--+-----R2-----|INT1 PB2-4|------->ROW (6-8) (5-7)
+ D+ <----|---+----R3-----|INT0 PC0-2|------->COL (9-11) (8-10)
+ Z1 Z2 | PC3|------->ENABLE (12) (11)
+ GND<----+---+-----------|GND PB0|<-------KEY (4) (3)
+ | PB1|------->PREV (5) (4)
| |
GND+-C2--+--|XTAL1 RXD|------->Debug Console
X1 | TXD|<-------Debug Console
@@ -134,5 +150,11 @@ Bread baord wires are used to connect Teensy++.
Z1,Z2: Zener 3.6V
C1,C2: 22pF
C3: 0.1uF
- X1: Crystal 20MHz(16MHz/12MHz)
- SW: Push Switch(Optional for bootloader)
+ X1: Crystal 12MHz
+ SW: Push Switch(for bootloader)
+
+- NOTE: See [V-USB] documentation for more detail of hardware and the USB stack.
+- NOTE: [USBaspLoader] is very useful for firmware update.
+
+[V-USB]: http://www.obdev.at/products/vusb/index.html
+[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html
diff --git a/keyboard/hhkb/config.h b/keyboard/hhkb/config.h
index ec51852c18..613e66d138 100644
--- a/keyboard/hhkb/config.h
+++ b/keyboard/hhkb/config.h
@@ -54,7 +54,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#endif
/* period of tapping(ms) */
-#define TAPPING_TERM 200
+#define TAPPING_TERM 300
/* tap count needed for toggling a feature */
#define TAPPING_TOGGLE 5
diff --git a/keyboard/hhkb/doc/HHKB.txt b/keyboard/hhkb/doc/HHKB.txt
index f99a074437..422c452c90 100644
--- a/keyboard/hhkb/doc/HHKB.txt
+++ b/keyboard/hhkb/doc/HHKB.txt
@@ -30,25 +30,27 @@ Connector Cable
Two PCBs are connected by 15 lines(13 in case of Pro2).
Vcc and GND use 3(2) lines each, other 9 lines are for keyboard signaling.
- Keyswitch PCB connector Teensy++ pins
- -------------------------------------------------------------------------------
- 1 Vcc(5V) Not exist on Pro2 5V
- 2 Vcc(5V) 5V
- 3 Vcc(5V) 5V
- 4 TP1684 KEY: Low(0) when key pressed PE6 input(with pullup)
- 5 TP1684 KEY_PREV: assert previous key state??? PE7 output
- 6 HC4051 A(bit0) select 8 rows(0 to 7) PB0 output
- 7 HC4051 B(bit1) PB1 output
- 8 HC4051 C(bit2) PB2 output
- 9 LS145 A(bit0) select 8 columns(0 to 7) PB3 output
- 10 LS145 B(bit1) PB4 output
- 11 LS145 C(bit2) PB5 output
- 12 LS145 D(enable) Low(0) enable selected column PB6 output
- 13 GND GND
- 14 GND GND
- 15 GND Not exist on Pro2 GND
+ Keyswitch connector
+ pro pro2 Description Teensy++ pins
+ --------------------------------------------------------------------------------------------
+ 1 Vcc(5V) Not exist on Pro2 5V
+ 2 1 Vcc(5V) 5V
+ 3 2 Vcc(5V) 5V
+ 4 3 TP1684 KEY: Low(0) when key pressed PE6 input(with pullup)
+ 5 4 TP1684 KEY_PREV: make threshold PE7 output
+ 6 5 HC4051 A(bit0)\ PB0 output
+ 7 6 HC4051 B(bit1) > select row(0 to 7) PB1 output
+ 8 7 HC4051 C(bit2)/ PB2 output
+ 9 8 LS145 A(bit0)\ PB3 output
+ 10 9 LS145 B(bit1) > select column(0 to 7) PB4 output
+ 11 10 LS145 C(bit2)/ PB5 output
+ 12 11 LS145 D(enable) Low(0) enables selected column PB6 output
+ 13 12 GND GND
+ 14 13 GND GND
+ 15 GND Not exist on Pro2 GND
NOTE: guessing pin5(KEY_PREV) may work for hysteresis of capacitive sensing.
+ NOTE: 1KOhm didn't work as pullup resistor on KEY. AVR internal pullup or 10KOhm resistor was OK.
(HHKB_connector.jpg)
diff --git a/keyboard/hhkb/doc/Power.txt b/keyboard/hhkb/doc/Power.txt
new file mode 100644
index 0000000000..1287053c3c
--- /dev/null
+++ b/keyboard/hhkb/doc/Power.txt
@@ -0,0 +1,48 @@
+HHKB Power consumption
+----------------------
+
+**Power consumption
+ board clock/prescaler keyswitch power ctrl current
+ --------------------------------------------------------------------------
+ tmk 16MHz no no 26.4mA
+ tmk 16MHz pro1 no 45.1mA
+ tmk 16MHz/2 no no 18.1mA
+ tmk 16MHz/2 pro1 no 37.3mA
+ tmk 8MHz no no 18.9mA
+ tmk 8MHz pro2 no(w/o FET) 32.1mA
+ tmk 8MHz pro2 no(w FET) 32.1mA withou POWER_ON/FF
+ tmk 8MHz pro2 no(w FET) 32.6mA with POWR_ON/OFF
+ tmk 8MHz pro2 15ms(w FET) 21.3mA with POWR_ON/OFF, enumerated but error -32
+ tmk 8MHz pro2 60ms(w FET) 13.3mA with POWR_ON/OFF, not enumerated
+
+ gh60 16MHz 25.8mA
+ gh60 16MHz USB suspend w LED breathing 17.6-29.1mA
+ gh60 16MHz USB suspend w/o LED 0.2mA(0.231-0.276mA)
+ Poker 5.6mA
+ Poker USB suspend 0.3mA(0.301mA)
+ gh60 16MHz stock firmware by komar 26.8mA
+
+
+ HHKB pro2 Over All 139.4mA
+ HHKB pro2 Controller 115.1mA
+ HHKB pro1 Controller 25.9mA
+
+
+keyswitch power consumption:
+pro1: 45.1-26.4=18.7mA
+ 37.3-18.1=19.2mA
+pro2: 32.1-18.9=13.2mA
+
+
+
+
+
+**Low Freq Crystal or Prescaler?
+No advantage of Low Freq Crystal against Prescaled.
+
+Clock routing
+X'tal --+---->Prescaler-------> System Clock
+ |
+ +---------------------> USB PLL
+
+Design Decision: Install 16MHz crystal on board with using clock rescaler.
diff --git a/keyboard/hhkb/led.c b/keyboard/hhkb/led.c
index 669b6107fa..8a08fe27fc 100644
--- a/keyboard/hhkb/led.c
+++ b/keyboard/hhkb/led.c
@@ -15,6 +15,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <avr/io.h>
#include "stdint.h"
#include "led.h"
@@ -22,5 +23,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* HHKB has no LEDs */
void led_set(uint8_t usb_led)
{
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ DDRD |= (1<<6);
+ PORTD |= (1<<6);
+ } else {
+ DDRD |= (1<<6);
+ PORTD &= ~(1<<6);
+ }
}
-
diff --git a/keyboard/hhkb/matrix.c b/keyboard/hhkb/matrix.c
index 3d4b1f6c74..d0731ef1f8 100644
--- a/keyboard/hhkb/matrix.c
+++ b/keyboard/hhkb/matrix.c
@@ -63,7 +63,7 @@ static matrix_row_t _matrix1[MATRIX_ROWS];
PORTE |= (1<<6); \
} while (0)
#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \
- (((COL) & 0x07)<<3) | \
+ (((COL) & 0x07)<<3) | \
((ROW) & 0x07))
#define KEY_ENABLE() (PORTB &= ~(1<<6))
#define KEY_UNABLE() (PORTB |= (1<<6))
@@ -73,6 +73,50 @@ static matrix_row_t _matrix1[MATRIX_ROWS];
#define KEY_POWER_ON()
#define KEY_POWER_OFF()
+#elif defined(__AVR_ATmega32U4__)
+// Ports for my designed Alt Controller PCB
+// row: PB0-2
+// col: PB3-5,6
+// key: PD7(pull-uped)
+// prev: PB7
+// power: PD4(L:off/H:on)
+#define KEY_INIT() do { \
+ DDRB = 0xFF; \
+ PORTB = 0x00; \
+ DDRD &= ~0x80; \
+ PORTD |= 0x80; \
+ /* keyswitch board power on */ \
+ DDRD |= (1<<4); \
+ PORTD |= (1<<4); \
+ KEY_UNABLE(); \
+ KEY_PREV_OFF(); \
+} while (0)
+#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \
+ (((COL) & 0x07)<<3) | \
+ ((ROW) & 0x07))
+#define KEY_ENABLE() (PORTB &= ~(1<<6))
+#define KEY_UNABLE() (PORTB |= (1<<6))
+#define KEY_STATE() (PIND & (1<<7))
+#define KEY_PREV_ON() (PORTB |= (1<<7))
+#define KEY_PREV_OFF() (PORTB &= ~(1<<7))
+#define KEY_POWER_ON()
+#define KEY_POWER_OFF()
+/*
+#define KEY_POWER_ON() do { \
+ KEY_INIT(); \
+ PORTD |= (1<<4); \
+ _delay_ms(1); \
+} while (0)
+#define KEY_POWER_OFF() do { \
+ PORTD &= ~(1<<4); \
+ DDRB &= ~0xFF; \
+ PORTB &= ~0xFF; \
+ DDRB &= ~0x80; \
+ PORTB &= ~0x80; \
+} while (0)
+*/
+
+
#elif defined(__AVR_ATmega328P__)
// Ports for V-USB
// key: PB0(pull-uped)
@@ -130,7 +174,6 @@ uint8_t matrix_cols(void)
void matrix_init(void)
{
#ifdef DEBUG
- print_enable = true;
debug_enable = true;
debug_keyboard = true;
#endif
@@ -170,9 +213,21 @@ uint8_t matrix_scan(void)
uint8_t last = TIMER_RAW;
KEY_ENABLE();
+
// Wait for KEY_STATE outputs its value.
// 1us was ok on one HHKB, but not worked on another.
- _delay_us(10);
+ // no wait doesn't work on Teensy++ with pro(1us works)
+ // no wait does work on tmk PCB(8MHz) with pro2
+ // 1us wait does work on both of above
+ // 1us wait doesn't work on tmk(16MHz)
+ // 5us wait does work on tmk(16MHz)
+ // 5us wait does work on tmk(16MHz/2)
+ // 5us wait does work on tmk(8MHz)
+ // 10us wait does work on Teensy++ with pro
+ // 10us wait does work on 328p+iwrap with pro
+ // 10us wait doesn't work on tmk PCB(8MHz) with pro2(very lagged scan)
+ _delay_us(5);
+
if (KEY_STATE()) {
matrix[row] &= ~(1<<col);
} else {