diff options
11 files changed, 684 insertions, 7 deletions
diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/config.h b/keyboards/crkbd/keymaps/vlukash_trackpad_left/config.h new file mode 100644 index 0000000000..bdd1a099ae --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/config.h @@ -0,0 +1,21 @@ +#pragma once + +/* Select hand configuration */ + +#define MASTER_RIGHT +// #define EE_HANDS + +#define SSD1306OLED + +#define USE_SERIAL_PD2 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c b/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c new file mode 100644 index 0000000000..48f60419fb --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c @@ -0,0 +1,227 @@ +#include QMK_KEYBOARD_H +#include "bootloader.h" +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +enum layer_names { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + RGBRST, + MBTN1, + SCRL +}; + +#define KC______ KC_TRNS +#define KC_XXXXX KC_NO +#define KC_LOWER LOWER +#define KC_RAISE RAISE +#define KC_RST RESET +#define KC_LRST RGBRST +#define KC_LTOG RGB_TOG +#define KC_LHUI RGB_HUI +#define KC_LHUD RGB_HUD +#define KC_LSAI RGB_SAI +#define KC_LSAD RGB_SAD +#define KC_LVAI RGB_VAI +#define KC_LVAD RGB_VAD +#define KC_LMOD RGB_MOD + +#define KC_CTLA CTL_T(KC_A) +#define KC_CTLSC CTL_T(KC_SCLN) +#define KC_SFTZ SFT_T(KC_Z) +#define KC_SFTSL SFT_T(KC_SLSH) +#define KC_WINX LWIN_T(KC_X) +#define KC_WINDO RWIN_T(KC_DOT) + +#define KC_MBTN1 MBTN1 +#define KC_SCRL SCRL + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + TAB, CTLA, S, D, F, G, H, J, K, L, CTLSC, QUOT, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + GRAVE, SFTZ, WINX, C, V, B, N, M, COMM, WINDO, SFTSL,BSLASH, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ), + + [_LOWER] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, XXXXX, PGDN, PSCR, PGUP, LBRC, RBRC, 7, 8, 9, XXXXX, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LCTRL, PLUS, MINS, EQL, LPRN, RPRN, 4, 5, 6, RCTRL, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LSFT, HOME, XXXXX, END, LCBR, RCBR, 1, 2, 3, RSFT, XXXXX, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, 0 + //`--------------------' `--------------------' + ), + + [_RAISE] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, XXXXX, F7, F8, F9, F10, BTN2, BTN2, MNXT, MPRV, MPLY, MSTP, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LCTRL, F4, F5, F6, F11, LEFT, DOWN, UP, RIGHT, RCTRL, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LSFT, F1, F2, F3, F12, XXXXX, XXXXX, VOLU, VOLD, MUTE, RSFT, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ), + + [_ADJUST] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, RST, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ) +}; + +int RGB_current_mode; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_layer_state(void); +const char *read_logo(void); +void set_keylog(uint16_t keycode, keyrecord_t *record); +const char *read_keylog(void); +const char *read_keylogs(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + // If you want to change the display of OLED, you need to change here + matrix_write_ln(matrix, read_layer_state()); + matrix_write_ln(matrix, read_keylog()); + matrix_write_ln(matrix, read_keylogs()); + } else { + matrix_write(matrix, read_logo()); + } +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef SSD1306OLED + set_keylog(keycode, record); +#endif + } + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + #endif + return false; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + } + return true; +} + diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/readme.md b/keyboards/crkbd/keymaps/vlukash_trackpad_left/readme.md new file mode 100644 index 0000000000..91b884749f --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/readme.md @@ -0,0 +1,14 @@ +# CrKbd with the Trackpad support + +CrKbd version that supports BlackBerry 8520 trackpad via additional PCB. +See this repository for more details: + - https://github.com/vlukash/corne-trackpad + - https://vlukash.com/2019/01/15/trackpad-in-keycap-corne-crkbd-keyboard + +This firmware is for the Left keyboard. + +# Build + +``` +make crkbd:vlukash_trackpad_left:dfu +``` diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/rules.mk b/keyboards/crkbd/keymaps/vlukash_trackpad_left/rules.mk new file mode 100644 index 0000000000..46be73c475 --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/rules.mk @@ -0,0 +1,11 @@ +# Build Options +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. + +BOOTLOADER = atmel-dfu + +# If you want to change the display of OLED, you need to change here +SRC += ./lib/glcdfont.c \ + ./lib/rgb_state_reader.c \ + ./lib/layer_state_reader.c \ + ./lib/logo_reader.c \ + ./lib/keylogger.c \ diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/config.h b/keyboards/crkbd/keymaps/vlukash_trackpad_right/config.h new file mode 100644 index 0000000000..8cbd8e9078 --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/config.h @@ -0,0 +1,35 @@ +#pragma once + +#define NO_DEBUG_LEDS + +// Connector PCB version +// 1 - PCB that supports flex caple and the trackpad sensor is mounted on an 'H' keycap +// - https://github.com/vlukash/corne-trackpad/tree/master/connector +// 2 - PCB woth no flex option, track sensor mounted directly on the PCB +// - https://github.com/vlukash/corne-trackpad/tree/master/connector-no-flex +#define TRACKPAD_CONNECTOR_VER 1 + +/* Select hand configuration */ +#define MASTER_RIGHT + +#define USE_SERIAL_PD2 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 300 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* key matrix size */ +// Rows are doubled-up +#undef MATRIX_COL_PINS +#define MATRIX_COL_PINS { F4, F5, F6, F7, B7, D5 } + +/* ws2812 RGB LED */ +#undef RGB_DI_PIN +#define RGB_DI_PIN B5 diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c b/keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c new file mode 100644 index 0000000000..8749f7a686 --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c @@ -0,0 +1,199 @@ +#include QMK_KEYBOARD_H +#include "bootloader.h" +#include "mousekey.h" +#include "pointing_device.h" +#include "report.h" + +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif + +extern bool isScrollMode; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +enum layer_names { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + RGBRST, + MBTN1, + SCRL +}; + +#define KC______ KC_TRNS +#define KC_XXXXX KC_NO +#define KC_LOWER LOWER +#define KC_RAISE RAISE +#define KC_RST RESET +#define KC_LRST RGBRST +#define KC_LTOG RGB_TOG +#define KC_LHUI RGB_HUI +#define KC_LHUD RGB_HUD +#define KC_LSAI RGB_SAI +#define KC_LSAD RGB_SAD +#define KC_LVAI RGB_VAI +#define KC_LVAD RGB_VAD +#define KC_LMOD RGB_MOD + +#define KC_CTLA CTL_T(KC_A) +#define KC_CTLSC CTL_T(KC_SCLN) +#define KC_SFTZ SFT_T(KC_Z) +#define KC_SFTSL SFT_T(KC_SLSH) +#define KC_WINX LWIN_T(KC_X) +#define KC_WINDO RWIN_T(KC_DOT) + +#define KC_MBTN1 MBTN1 +#define KC_SCRL SCRL + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + TAB, CTLA, S, D, F, G, H, J, K, L, CTLSC, QUOT, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + GRAVE, SFTZ, WINX, C, V, B, N, M, COMM, WINDO, SFTSL,BSLASH, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ), + + [_LOWER] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, XXXXX, PGDN, PSCR, PGUP, LBRC, RBRC, 7, 8, 9, XXXXX, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LCTRL, PLUS, MINS, EQL, LPRN, RPRN, 4, 5, 6, RCTRL, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LSFT, HOME, XXXXX, END, LCBR, RCBR, 1, 2, 3, RSFT, XXXXX, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, 0 + //`--------------------' `--------------------' + ), + + [_RAISE] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + ESC, XXXXX, F7, F8, F9, F10, BTN2, BTN2, MNXT, MPRV, MPLY, MSTP, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LCTRL, F4, F5, F6, F11, LEFT, DOWN, UP, RIGHT, RCTRL, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + XXXXX, LSFT, F1, F2, F3, F12, XXXXX, XXXXX, VOLU, VOLD, MUTE, RSFT, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ), + + [_ADJUST] = LAYOUT_kc( + //,-----------------------------------------. ,-----------------------------------------. + RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, RST, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + LOWER, SPC, SCRL, MBTN1, ENT, RAISE + //`--------------------' `--------------------' + ) +}; + +int RGB_current_mode; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + report_mouse_t currentReport = {}; + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + #endif + return false; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + case MBTN1: + currentReport = pointing_device_get_report(); + if (record->event.pressed) { + currentReport.buttons |= MOUSE_BTN1; + } + else { + currentReport.buttons &= ~MOUSE_BTN1; + } + pointing_device_set_report(currentReport); + pointing_device_send(); + return false; + case SCRL: + if (record->event.pressed) { + isScrollMode = true; + } + else { + isScrollMode = false; + } + return false; + } + return true; +} diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/readme.md b/keyboards/crkbd/keymaps/vlukash_trackpad_right/readme.md new file mode 100644 index 0000000000..cd511018c1 --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/readme.md @@ -0,0 +1,14 @@ +# CrKbd with the Trackpad support + +CrKbd version that supports BlackBerry 8520 trackpad via additional PCB. +See this repository for more details: + - https://github.com/vlukash/corne-trackpad + - https://vlukash.com/2019/01/15/trackpad-in-keycap-corne-crkbd-keyboard + +This firmware is for the Right keyboard. + +# Build + +``` +make crkbd:vlukash_trackpad_right:dfu +``` diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/rules.mk b/keyboards/crkbd/keymaps/vlukash_trackpad_right/rules.mk new file mode 100644 index 0000000000..bd53c19211 --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/rules.mk @@ -0,0 +1,10 @@ +# Build Options +POINTING_DEVICE_ENABLE = yes # Generic Pointer, not as big as mouse keys hopefully. +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. + +BOOTLOADER = atmel-dfu + +# Add support for the BB 8520 trackpad +SRC += trackpad.c diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.c b/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.c new file mode 100644 index 0000000000..afccb8c7ed --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.c @@ -0,0 +1,78 @@ +#include "trackpad.h" + +// bool isScrollingMode = false; +bool isScrollMode = false; + +void pointing_device_init(void){ + + SPI_Init(SPI_SPEED_FCPU_DIV_8 | SPI_MODE_MASTER); + + // Set as output + TP_RESET_INIT; + TP_SHUTDOWN_INIT; + TP_CS_INIT; + LVL_SHIFT_EN_INIT; + + // Reset level shifter + LVL_SHIFT_EN_LO; + wait_ms(100); + LVL_SHIFT_EN_HI; + + // Force a BB-8520 reset + TP_RESET_HI; + wait_ms(100); + TP_RESET_LO; + + // Turn on BB-8520 trackpad + TP_SHUTDOWN_LO; + + TP_CS_HI; +} + +uint8_t readRegister(uint8_t address) { + uint8_t data; + + TP_CS_LO; + + // Read the data + SPI_TransferByte(address); + data = SPI_TransferByte(0x00); + + TP_CS_HI; + + return data; +} + +void pointing_device_task(void){ + uint8_t motion = readRegister(0x02); + + // Motion has occurred on the trackpad + if (motion > 127) { + + int8_t dx, dy; + + if(TRACKPAD_CONNECTOR_VER == 1) { + dx = readRegister(0x03); + dy = -readRegister(0x04); + } + else { + dy = -readRegister(0x03); + dx = -readRegister(0x04); + } + + report_mouse_t currentReport = pointing_device_get_report(); + if (isScrollMode) + { + currentReport.h = dx/SCROLL_SPEED_DIVIDER; + currentReport.v = dy/SCROLL_SPEED_DIVIDER; + } + else + { + currentReport.x = dx * POINTER_SPEED_MULTIPLIER; + currentReport.y = dy * POINTER_SPEED_MULTIPLIER; + } + + pointing_device_set_report(currentReport); + pointing_device_send(); + } +} diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.h b/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.h new file mode 100644 index 0000000000..755abc7de2 --- /dev/null +++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.h @@ -0,0 +1,32 @@ +#pragma once + +#include "pointing_device.h" +#include "quantum.h" +#include "report.h" +#include <util/delay.h> +#include "../../lib/lufa/LUFA/Drivers/Peripheral/SPI.h" + +// Trackpad speed adjustments +#define POINTER_SPEED_MULTIPLIER 2 +#define SCROLL_SPEED_DIVIDER 6 + +// Pins on corresponding ports +#define TP_RESET 1 +#define TP_SHUTDOWN 0 +#define TP_CS 0 +#define LVL_SHIFT_EN 7 + +// Configure as output +#define TP_RESET_INIT DDRF |= (1 << TP_RESET); +#define TP_SHUTDOWN_INIT DDRF |= (1 << TP_SHUTDOWN); +#define TP_CS_INIT DDRB |= (1 << TP_CS); +#define LVL_SHIFT_EN_INIT DDRC |= (1 << LVL_SHIFT_EN); + +#define TP_RESET_HI PORTF |= (1 << TP_RESET); +#define TP_RESET_LO PORTF &= ~ (1 << TP_RESET); +#define TP_SHUTDOWN_HI PORTF |= (1 << TP_SHUTDOWN); +#define TP_SHUTDOWN_LO PORTF &= ~ (1 << TP_SHUTDOWN); +#define TP_CS_HI PORTB |= (1 << TP_CS); +#define TP_CS_LO PORTB &= ~ (1 << TP_CS); +#define LVL_SHIFT_EN_HI PORTC |= (1 << LVL_SHIFT_EN); +#define LVL_SHIFT_EN_LO PORTC &= ~ (1 << LVL_SHIFT_EN); diff --git a/keyboards/crkbd/rev1/matrix.c b/keyboards/crkbd/rev1/matrix.c index 718cc57448..dd93506db1 100644 --- a/keyboards/crkbd/rev1/matrix.c +++ b/keyboards/crkbd/rev1/matrix.c @@ -93,6 +93,44 @@ uint8_t matrix_cols(void) return MATRIX_COLS; } +void tx_rx_leds_init(void) +{ +#ifndef NO_DEBUG_LEDS + TX_RX_LED_INIT; + TXLED0; + RXLED0; +#endif +} + +void tx_led_on(void) +{ +#ifndef NO_DEBUG_LEDS + TXLED1; +#endif +} + +void tx_led_off(void) +{ +#ifndef NO_DEBUG_LEDS + TXLED0; +#endif +} + +void rx_led_on(void) +{ +#ifndef NO_DEBUG_LEDS + RXLED1; +#endif +} + +void rx_led_off(void) +{ +#ifndef NO_DEBUG_LEDS + RXLED0; +#endif +} + + void matrix_init(void) { debug_enable = true; @@ -102,9 +140,7 @@ void matrix_init(void) unselect_rows(); init_cols(); - TX_RX_LED_INIT; - TXLED0; - RXLED0; + tx_rx_leds_init(); // initialize matrix state: all keys off for (uint8_t i=0; i < MATRIX_ROWS; i++) { @@ -189,10 +225,10 @@ int serial_transaction(int master_changed) { int ret=serial_update_buffers(); #endif if (ret ) { - if(ret==2) RXLED1; + if(ret==2) rx_led_on(); return 1; } - RXLED0; + rx_led_off(); memcpy(&matrix[slaveOffset], (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH); return 0; @@ -241,7 +277,7 @@ uint8_t matrix_master_scan(void) { if( serial_transaction(mchanged) ) { #endif // turn on the indicator led when halves are disconnected - TXLED1; + tx_led_on(); error_count++; @@ -254,7 +290,7 @@ uint8_t matrix_master_scan(void) { } } else { // turn off the indicator led on no error - TXLED0; + tx_led_off(); error_count = 0; } matrix_scan_quantum(); |