diff options
| -rw-r--r-- | keyboards/crkbd/readme.md | 9 | ||||
| -rw-r--r-- | keyboards/crkbd/rev1/rev1.c | 71 |
2 files changed, 39 insertions, 41 deletions
diff --git a/keyboards/crkbd/readme.md b/keyboards/crkbd/readme.md index 2f599544a5..5de3e3ae00 100644 --- a/keyboards/crkbd/readme.md +++ b/keyboards/crkbd/readme.md @@ -81,13 +81,4 @@ And in your `config.h` file, add the following: #endif ``` -However, to properly handle the LED matrix, two LED maps had to be used. One for the left half, and one for the right half. For the left, you don't need to do anything. That's the default setup. But for the right side, you need to add `RGB_MATRIX_SPLIT_RIGHT=yes` needs to be added to the command. - -First, compile and flash the left half. Then when that's done, recompile with the setting above. It should look something like: - -```sh -make crkbd:default RGB_MATRIX_SPLIT_RIGHT=yes -``` -And then flash this new firmware image. - After this is done, you should be able to use the normal RGB keycodes, but you'll see the RGB Matrix effects in use, giving a much better experience. diff --git a/keyboards/crkbd/rev1/rev1.c b/keyboards/crkbd/rev1/rev1.c index 9568d80080..b26292af5b 100644 --- a/keyboards/crkbd/rev1/rev1.c +++ b/keyboards/crkbd/rev1/rev1.c @@ -1,6 +1,5 @@ #include "crkbd.h" - #ifdef RGB_MATRIX_ENABLE // Logical Layout @@ -39,37 +38,6 @@ // 05 06 06 05 // 15 14 07 07 14 15 3 - -#ifdef RGB_MATRIX_SPLIT_RIGHT -led_config_t g_led_config = { { - { 51, 50, 45, 44, 37, 36 }, - { 52, 49, 46, 43, 38, 35 }, - { 53, 48, 47, 42, 39, 34 }, - { NO_LED, NO_LED, NO_LED, 41, 40, 33 }, - { 24, 23, 18, 17, 10, 9 }, - { 25, 22, 19, 16, 11, 8 }, - { 26, 21, 20, 15, 12, 7 }, - { NO_LED, NO_LED, NO_LED, 14, 13, 6 } -}, { - { 139, 16 }, { 174, 13 }, { 208, 20 }, { 208, 38 }, { 174, 48 }, { 139, 52 }, { 129, 63 }, - { 139, 39 }, { 139, 21 }, { 139, 4 }, { 156, 2 }, { 156, 19 }, { 156, 37 }, { 144, 58 }, - { 164, 55 }, { 174, 35 }, { 174, 13 }, { 174, 0 }, { 191, 3 }, { 191, 20 }, { 191, 37 }, - { 208, 42 }, { 208, 24 }, { 208, 7 }, { 224, 7 }, { 224, 24 }, { 224, 41 }, { 85, 16 }, - { 50, 13 }, { 16, 20 }, { 16, 38 }, { 50, 48 }, { 85, 52 }, { 95, 63 }, { 85, 39 }, - { 85, 21 }, { 85, 4 }, { 68, 2 }, { 68, 19 }, { 68, 37 }, { 80, 58 }, { 60, 55 }, - { 50, 35 }, { 50, 13 }, { 50, 0 }, { 33, 3 }, { 33, 20 }, { 33, 37 }, { 16, 42 }, - { 16, 24 }, { 16, 7 }, { 0, 7 }, { 0, 24 }, { 0, 41 } -}, { - 2, 2, 2, 2, 2, 2, 1, - 4, 4, 4, 4, 4, 4, 1, - 1, 4, 4, 4, 4, 4, 4, - 4, 4, 4, 1, 1, 1, 2, - 2, 2, 2, 2, 2, 1, 4, - 4, 4, 4, 4, 4, 1, 1, - 4, 4, 4, 4, 4, 4, 4, - 4, 4, 1, 1, 1 -} }; -#else led_config_t g_led_config = { { { 24, 23, 18, 17, 10, 9 }, { 25, 22, 19, 16, 11, 8 }, @@ -99,4 +67,43 @@ led_config_t g_led_config = { { 4, 4, 1, 1, 1 } }; #endif + +__attribute__((weak)) +void matrix_init_user(void) {} + +void matrix_init_kb(void) { + +#ifdef RGB_MATRIX_ENABLE + if (!isLeftHand) { + g_led_config = (led_config_t){ { + { 51, 50, 45, 44, 37, 36 }, + { 52, 49, 46, 43, 38, 35 }, + { 53, 48, 47, 42, 39, 34 }, + { NO_LED, NO_LED, NO_LED, 41, 40, 33 }, + { 24, 23, 18, 17, 10, 9 }, + { 25, 22, 19, 16, 11, 8 }, + { 26, 21, 20, 15, 12, 7 }, + { NO_LED, NO_LED, NO_LED, 14, 13, 6 } + }, { + { 139, 16 }, { 174, 13 }, { 208, 20 }, { 208, 38 }, { 174, 48 }, { 139, 52 }, { 129, 63 }, + { 139, 39 }, { 139, 21 }, { 139, 4 }, { 156, 2 }, { 156, 19 }, { 156, 37 }, { 144, 58 }, + { 164, 55 }, { 174, 35 }, { 174, 13 }, { 174, 0 }, { 191, 3 }, { 191, 20 }, { 191, 37 }, + { 208, 42 }, { 208, 24 }, { 208, 7 }, { 224, 7 }, { 224, 24 }, { 224, 41 }, { 85, 16 }, + { 50, 13 }, { 16, 20 }, { 16, 38 }, { 50, 48 }, { 85, 52 }, { 95, 63 }, { 85, 39 }, + { 85, 21 }, { 85, 4 }, { 68, 2 }, { 68, 19 }, { 68, 37 }, { 80, 58 }, { 60, 55 }, + { 50, 35 }, { 50, 13 }, { 50, 0 }, { 33, 3 }, { 33, 20 }, { 33, 37 }, { 16, 42 }, + { 16, 24 }, { 16, 7 }, { 0, 7 }, { 0, 24 }, { 0, 41 } + }, { + 2, 2, 2, 2, 2, 2, 1, + 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 1, 1, 1, 2, + 2, 2, 2, 2, 2, 1, 4, + 4, 4, 4, 4, 4, 1, 1, + 4, 4, 4, 4, 4, 4, 4, + 4, 4, 1, 1, 1 + } }; + } #endif + matrix_init_user(); +} |