64 files changed, 2604 insertions, 1783 deletions

diff --git a/README.md b/README.md
index e077fc928d..dd03e1403d 100644
--- a/README.md
+++ b/README.md
@@ -54,6 +54,15 @@ You can find some keyboard specific projects under `converter` and `keyboard` di
 * [KMAC](keyboard/kmac/)                    - Korean custom keyboard
 * [Lightsaber](keyboard/lightsaber/)        - Korean custom keyboard
 * [Infinity](keyboard/infinity/)            - Massdrop [Infinity keyboard][Infinity]
+* [NerD](keyboard/nerd/)                    - Korean custom keyboard
+* [KittenPaw](keyboard/kitten_paw)          - Custom Majestouch controller
+* [Lightpad](keyboard/lightpad)             - Korean custom keypad
+* [ghost_squid](keyboard/ghost_squid/)      - [The Ghost Squid][ghost_squid] controller for [Cooler Master QuickFire XT][cmxt]
+
+### Extenal projects using tmk_keyboard
+* [ErgoDox_cub-uanic][cub-uanic]            - Split Ergonomic Keyboard [ErgoDox][ergodox_org]
+* [mcdox][mcdox_tmk]                        - [mcdox][mcdox]
+
 
 [GH_macway]:    http://geekhack.org/showwiki.php?title=Island:11930
 [GH_hhkb]:      http://geekhack.org/showwiki.php?title=Island:12047
@@ -74,6 +83,12 @@ You can find some keyboard specific projects under `converter` and `keyboard` di
 [Sun]:          http://en.wikipedia.org/wiki/Sun-3
 [IIGS]:         http://en.wikipedia.org/wiki/Apple_IIGS
 [Infinity]:     https://www.massdrop.com/buy/infinity-keyboard-kit
+[ghost_squid]:  http://deskthority.net/wiki/Costar_replacement_controllers#The_Ghost_Squid
+[cmxt]:         http://gaming.coolermaster.com/en/products/keyboards/quickfirext/
+[ergodox_org]:  http://ergodox.org/
+[cub-uanic]:    https://github.com/cub-uanic/tmk_keyboard/tree/master/keyboard/ergodox
+[mcdox]:        https://github.com/DavidMcEwan/mcdox
+[mcdox_tmk]:    https://github.com/DavidMcEwan/tmk_keyboard/tree/master/keyboard/mcdox
 
 
 
@@ -278,4 +293,4 @@ Coding Style
 
 Other Keyboard Firmware Projects
 ------------------
-See [doc/other_projects.md](doc/other_projects.md).
+You can learn a lot about keyboard firmware from these. See [doc/other_projects.md](doc/other_projects.md).
diff --git a/common/avr/suspend.c b/common/avr/suspend.c
index 66a579fd78..80243f02bc 100644
--- a/common/avr/suspend.c
+++ b/common/avr/suspend.c
@@ -7,6 +7,7 @@
 #include "backlight.h"
 #include "suspend_avr.h"
 #include "suspend.h"
+#include "timer.h"
 #ifdef PROTOCOL_LUFA
 #include "lufa.h"
 #endif
@@ -52,11 +53,13 @@ void suspend_idle(uint8_t time)
  *          WDTO_4S
  *          WDTO_8S
  */
-void suspend_power_down(uint8_t wdto)
+static uint8_t wdt_timeout = 0;
+static void power_down(uint8_t wdto)
 {
 #ifdef PROTOCOL_LUFA
     if (USB_DeviceState == DEVICE_STATE_Configured) return;
 #endif
+    wdt_timeout = wdto;
 
     // Watchdog Interrupt Mode
     wdt_intr_enable(wdto);
@@ -67,7 +70,6 @@ void suspend_power_down(uint8_t wdto)
     // - prescale clock
     // - BOD disable
     // - Power Reduction Register PRR
-
     set_sleep_mode(SLEEP_MODE_PWR_DOWN);
     sleep_enable();
     sei();
@@ -78,6 +80,11 @@ void suspend_power_down(uint8_t wdto)
     wdt_disable();
 }
 
+void suspend_power_down(void)
+{
+    power_down(WDTO_15MS);
+}
+
 bool suspend_wakeup_condition(void)
 {
     matrix_power_up();
@@ -103,15 +110,13 @@ void suspend_wakeup_init(void)
 /* watchdog timeout */
 ISR(WDT_vect)
 {
-    /* wakeup from MCU sleep mode */
-/*
-    // blink LED
-    static uint8_t led_state = 0;
-    static uint8_t led_count = 0;
-    led_count++;
-    if ((led_count & 0x07) == 0) {
-        led_set((led_state ^= (1<<USB_LED_CAPS_LOCK)));
+    // compensate timer for sleep
+    switch (wdt_timeout) {
+        case WDTO_15MS:
+            timer_count += 15 + 2;  // WDTO_15MS + 2(from observation)
+            break;
+        default:
+            ;
     }
-*/
 }
 #endif
diff --git a/common/command.c b/common/command.c
index 1a507e3a46..fbaa9f2d75 100644
--- a/common/command.c
+++ b/common/command.c
@@ -303,7 +303,7 @@ static bool command_common(uint8_t code)
 #endif
             " " STR(BOOTLOADER_SIZE) "\n");
 
-            print("GCC: " STR(__GNUC__) "." STR(__GNUC_MINOR__) "." STR(__GNUC_PATCHLEVEL__) 
+            print("GCC: " STR(__GNUC__) "." STR(__GNUC_MINOR__) "." STR(__GNUC_PATCHLEVEL__)
                   " AVR-LIBC: " __AVR_LIBC_VERSION_STRING__
                   " AVR_ARCH: avr" STR(__AVR_ARCH__) "\n");
             break;
@@ -542,12 +542,12 @@ static void mousekey_console_help(void)
     print("4:	select mk_time_to_max\n");
     print("5:	select mk_wheel_max_speed\n");
     print("6:	select mk_wheel_time_to_max\n");
-    print("p:	print prameters\n");
+    print("p:	print parameters\n");
     print("d:	set default values\n");
-    print("up:	increase prameters(+1)\n");
-    print("down:	decrease prameters(-1)\n");
-    print("pgup:	increase prameters(+10)\n");
-    print("pgdown:	decrease prameters(-10)\n");
+    print("up:	increase parameters(+1)\n");
+    print("down:	decrease parameters(-1)\n");
+    print("pgup:	increase parameters(+10)\n");
+    print("pgdown:	decrease parameters(-10)\n");
     print("\nspeed = delta * max_speed * (repeat / time_to_max)\n");
     print("where delta: cursor="); pdec(MOUSEKEY_MOVE_DELTA);
     print(", wheel="); pdec(MOUSEKEY_WHEEL_DELTA); print("\n");
diff --git a/common/suspend.h b/common/suspend.h
index f339c670ac..80617a8244 100644
--- a/common/suspend.h
+++ b/common/suspend.h
@@ -6,7 +6,7 @@
 
 
 void suspend_idle(uint8_t timeout);
-void suspend_power_down(uint8_t timeout);
+void suspend_power_down(void);
 bool suspend_wakeup_condition(void);
 void suspend_wakeup_init(void);
 
diff --git a/converter/adb_usb/README.md b/converter/adb_usb/README.md
index defc477e2c..21ad318c1d 100644
--- a/converter/adb_usb/README.md
+++ b/converter/adb_usb/README.md
@@ -88,7 +88,7 @@ modifiers except for GUI key(Windows/Command).
 And most ADB keyboard has no diodes in its matrix so they are not NKRO,
 though ADB protocol itself supports it. See protocol/adb.c for more info.
 
-If keyobard has ISO layout you need to use ISO keymap with `make KEYMAP=iso`. With ANSI
+If keyboard has ISO layout you need to use ISO keymap with `make KEYMAP=iso`. With ANSI
 keymap you will suffer from swapped keys problem.
 
 https://github.com/tmk/tmk_keyboard/issues/35
diff --git a/doc/keycode.txt b/doc/keycode.txt
index 4137566924..760c726e3b 100644
--- a/doc/keycode.txt
+++ b/doc/keycode.txt
@@ -81,7 +81,7 @@ KC_F12                              45 Keyboard F12
 KC_PSCREEN          KC_PSCR         46 Keyboard PrintScreen1
 KC_SCKLOCK          KC_SLCK         47 Keyboard Scroll Lock11
 KC_PAUSE            KC_PAUS         48 Keyboard Pause1
-KC_INSERT           KC_INT          49 Keyboard Insert1
+KC_INSERT           KC_INS          49 Keyboard Insert1
 KC_HOME                             4A Keyboard Home1
 KC_PGUP                             4B Keyboard PageUp1
 KC_DELETE           KC_DELETE       4C Keyboard Delete Forward
diff --git a/doc/other_projects.md b/doc/other_projects.md
index ce24e0ab5c..bf980b0a9e 100644
--- a/doc/other_projects.md
+++ b/doc/other_projects.md
@@ -29,6 +29,7 @@ Other Keyboard Firmware Projects
 ## ErgoDox[Ergo][Split][USB][AVR]
 - <http://geekhack.org/index.php?topic=22780.0>
 - <https://github.com/benblazak/ergodox-firmware>
+- <https://github.com/cub-uanic/tmk_keyboard>
 
 ## Suka's keyboard collection[Ergo][Split][3DPrinting][USB][AVR]
 - <http://deskthority.net/workshop-f7/my-diy-keyboard-collection-or-how-i-became-a-kb-geek-t2534.html>
diff --git a/keyboard/ghost_squid/Makefile.lufa b/keyboard/ghost_squid/Makefile.lufa
new file mode 100644
index 0000000000..61893893a4
--- /dev/null
+++ b/keyboard/ghost_squid/Makefile.lufa
@@ -0,0 +1,117 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = ghostsquid_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC =	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config.h
+
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+#   comment out to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+#CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+
+
+# Boot Section Size in bytes
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/ghost_squid/README.md b/keyboard/ghost_squid/README.md
new file mode 100644
index 0000000000..dda67e6ba1
--- /dev/null
+++ b/keyboard/ghost_squid/README.md
@@ -0,0 +1,20 @@
+The Ghost Squid controller
+==========================
+Custom controller for the Cooler Master QuickFire XT keyboard designed by bpiphany.
+
+*Note that this is not the official firmware*
+
+Build
+-----
+Move to this directory then just run `make` like:
+
+    $ make -f Makefile.lufa
+
+At the moment only the LUFA stack is supported.
+
+
+Bootloader
+---------
+To enter bootloader by hardware use a magnet above the controller before connecting the usb cable.
+
+It is still possible to use Boot Magic and Command (LSFT+RSFT+PAUS) to access the bootloader though.
diff --git a/keyboard/ghost_squid/config.h b/keyboard/ghost_squid/config.h
new file mode 100644
index 0000000000..54f03143c1
--- /dev/null
+++ b/keyboard/ghost_squid/config.h
@@ -0,0 +1,43 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED // 0x2516 (original CM XT value)
+#define PRODUCT_ID      0x001A
+#define DEVICE_VER      0x0000
+#define MANUFACTURER    Cooler Master
+#define PRODUCT         Cooler Master QuickFire XT
+
+/* message strings */
+#define DESCRIPTION     t.m.k. keyboard firmware for Cooler Master QuickFire XT
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
+
+/* Set 0 if need no debouncing */
+#define DEBOUNCE    5
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#endif
diff --git a/keyboard/ghost_squid/keymap.c b/keyboard/ghost_squid/keymap.c
new file mode 100644
index 0000000000..e9ad9efe1a
--- /dev/null
+++ b/keyboard/ghost_squid/keymap.c
@@ -0,0 +1,102 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "report.h"
+#include "host.h"
+#include "debug.h"
+#include "keymap.h"
+
+/*
+ Matrix col/row mapping
+
+ ,----.    ,-------------------. ,-------------------. ,-------------------. ,--------------.
+ |06/6|    |07/4|08/4|08/2|08/6| |15/5|11/6|12/2|12/4| |14/4|14/5|14/6|14/0| |13/5|13/7|15/7|
+ `----'    `-------------------' `-------------------' `-------------------' `--------------'
+ ,-------------------------------------------------------------------------. ,--------------. ,-------------------.
+ |06/4|06/5|07/5|08/5|09/5|09/4|10/4|10/5|11/5|12/5|05/5|05/4|11/4|    14/2| |17/4|02/4|04/4| |16/1|17/1|04/1|04/0|
+ |-------------------------------------------------------------------------| |--------------| |-------------------|
+ |06/2  |06/7|07/7|08/7|09/7|09/2|10/2|10/7|11/7|12/7|05/7|05/2|11/2|  14/3| |16/4|02/5|04/5| |16/7|17/7|04/7|    |
+ |-------------------------------------------------------------------------| '--------------' |-------------- 02/7|
+ |02/7   |06/3|07/3|08/3|09/3|09/6|10/6|10/3|11/3|12/3|05/3|05/6|      14/1|                  |16/2|17/2|04/2|    |
+ |-------------------------------------------------------------------------|      ,----.      |-------------------|
+ |01/2     |06/1|07/1|08/1|09/1|09/0|10/0|10/1|11/1|12/1|05/0|         01/3|      |02/6|      |16/3|17/3|04/3|    |
+ |-------------------------------------------------------------------------| ,--------------. |-------------- 02/3|
+ |15/4|03/2|13/6|                 16/6                  |13/0|0/3|12/0|15/1| |02/0|16/0|17/0| | 17/6    |04/6|    |
+ `-------------------------------------------------------------------------' `--------------' `-------------------'
+*/
+
+#define KEYMAP( \
+    KG6,      KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0,   KN5, KN7, KP7,                       \
+    KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2,   KR4, KC4, KE4,   KQ1, KR1, KE1, KE0, \
+    KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3,   KQ4, KC5, KE5,   KQ7, KR7, KE7, KC7, \
+    KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6,      KO1,                    KQ2, KR2, KE2,      \
+    KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0,      KB3,        KC6,        KQ3, KR3, KE3, KC3, \
+    KP4, KD2, KN6,                KQ6,                KN0, KA3, KM0, KP1,   KC0, KQ0, KR0,   KR6,      KE6       \
+) { \
+/*            0         1         2         3         4         5         6         7   */  \
+/* A  0 */ {KC_NO,    KC_NO,    KC_NO,    KC_##KA3, KC_NO,    KC_NO,    KC_NO,    KC_NO   },\
+/* B  1 */ {KC_NO,    KC_NO,    KC_##KB2, KC_##KB3, KC_NO,    KC_NO,    KC_NO,    KC_NO   },\
+/* C  2 */ {KC_##KC0, KC_NO,    KC_NO,    KC_##KC3, KC_##KC4, KC_##KC5, KC_##KC6, KC_##KC7},\
+/* D  3 */ {KC_NO,    KC_NO,    KC_##KD2, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO   },\
+/* E  4 */ {KC_##KE0, KC_##KE1, KC_##KE2, KC_##KE3, KC_##KE4, KC_##KE5, KC_##KE6, KC_##KE7},\
+/* F  5 */ {KC_##KF0, KC_NO,    KC_##KF2, KC_##KF3, KC_##KF4, KC_##KF5, KC_##KF6, KC_##KF7},\
+/* G  6 */ {KC_NO,    KC_##KG1, KC_##KG2, KC_##KG3, KC_##KG4, KC_##KG5, KC_##KG6, KC_##KG7},\
+/* H  7 */ {KC_NO,    KC_##KH1, KC_##KH2, KC_##KH3, KC_##KH4, KC_##KH5, KC_##KH6, KC_##KH7},\
+/* I  8 */ {KC_NO,    KC_##KI1, KC_##KI2, KC_##KI3, KC_##KI4, KC_##KI5, KC_##KI6, KC_##KI7},\
+/* J  9 */ {KC_##KJ0, KC_##KJ1, KC_##KJ2, KC_##KJ3, KC_##KJ4, KC_##KJ5, KC_##KJ6, KC_##KJ7},\
+/* K 10 */ {KC_##KK0, KC_##KK1, KC_##KK2, KC_##KK3, KC_##KK4, KC_##KK5, KC_##KK6, KC_##KK7},\
+/* L 11 */ {KC_NO,    KC_##KL1, KC_##KL2, KC_##KL3, KC_##KL4, KC_##KL5, KC_##KL6, KC_##KL7},\
+/* M 12 */ {KC_##KM0, KC_##KM1, KC_##KM2, KC_##KM3, KC_##KM4, KC_##KM5, KC_NO,    KC_##KM7},\
+/* N 13 */ {KC_##KN0, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##KN5, KC_##KN6, KC_##KN7},\
+/* O 14 */ {KC_##KO0, KC_##KO1, KC_##KO2, KC_##KO3, KC_##KO4, KC_##KO5, KC_##KO6, KC_NO   },\
+/* P 15 */ {KC_NO,    KC_##KP1, KC_NO,    KC_NO,    KC_##KP4, KC_##KP5, KC_NO,    KC_##KP7},\
+/* Q 16 */ {KC_##KQ0, KC_##KQ1, KC_##KQ2, KC_##KQ3, KC_##KQ4, KC_NO,    KC_##KQ6, KC_##KQ7},\
+/* R 17 */ {KC_##KR0, KC_##KR1, KC_##KR2, KC_##KR3, KC_##KR4, KC_NO,    KC_##KR6, KC_##KR7} \
+}
+
+#include "keymap_ansi.h"
+
+#define KEYMAPS_SIZE    (sizeof(keymaps) / sizeof(keymaps[0]))
+#define FN_ACTIONS_SIZE (sizeof(fn_actions) / sizeof(fn_actions[0]))
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+    if (layer < KEYMAPS_SIZE) {
+        return pgm_read_byte(&keymaps[(layer)][(key.col)][(key.row)]);
+    } else {
+        return pgm_read_byte(&keymaps[0][(key.col)][(key.row)]);
+    }
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+    action_t action;
+    if (FN_INDEX(keycode) < FN_ACTIONS_SIZE) {
+        action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
+    } else {
+        action.code = ACTION_NO;
+    }
+    return action;
+}
diff --git a/keyboard/ghost_squid/keymap_ansi.h b/keyboard/ghost_squid/keymap_ansi.h
new file mode 100644
index 0000000000..ed1088baa9
--- /dev/null
+++ b/keyboard/ghost_squid/keymap_ansi.h
@@ -0,0 +1,23 @@
+
+static const uint8_t PROGMEM keymaps[][MATRIX_COLS][MATRIX_ROWS] = {
+    /* Layer 0: Standard ANSI layer */
+    KEYMAP(\
+         ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11,  F12,        PSCR,SLCK,PAUS,                         \
+         GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS, EQL,BSPC,   INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS, \
+         TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,   DEL, END, PGDN,    P7,  P8,  P9,  PPLS, \
+         CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,      ENT,                      P4,  P5,  P6,        \
+         LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RSFT,