diff options
| -rw-r--r-- | docs/ChangeLog/20220226/PR15304.md | 13 | ||||
| -rw-r--r-- | docs/feature_pointing_device.md | 116 | ||||
| -rw-r--r-- | docs/feature_split_keyboard.md | 8 | ||||
| -rw-r--r-- | drivers/sensors/pimoroni_trackball.c | 22 | ||||
| -rw-r--r-- | drivers/sensors/pimoroni_trackball.h | 9 | ||||
| -rw-r--r-- | quantum/pointing_device.c | 389 | ||||
| -rw-r--r-- | quantum/pointing_device.h | 13 | ||||
| -rw-r--r-- | quantum/pointing_device_drivers.c | 24 | ||||
| -rw-r--r-- | quantum/split_common/transaction_id_define.h | 6 | ||||
| -rw-r--r-- | quantum/split_common/transactions.c | 79 | ||||
| -rw-r--r-- | quantum/split_common/transport.h | 13 |
11 files changed, 626 insertions, 66 deletions
diff --git a/docs/ChangeLog/20220226/PR15304.md b/docs/ChangeLog/20220226/PR15304.md new file mode 100644 index 0000000000..3cdb40db10 --- /dev/null +++ b/docs/ChangeLog/20220226/PR15304.md @@ -0,0 +1,13 @@ +### Split Common core now supports Pointing Devices ([#15304](https://github.com/qmk/qmk_firmware/pull/15304)) + +Pointing devices can now be shared across a split keyboard with support for a single pointing device or a pointing device on each side. + +This feature can be enabled with `#define SPLIT_POINTING_ENABLE` and one of the following options: + +| Setting | Description | +|---------------------------|------------------------------------| +|`POINTING_DEVICE_LEFT` | Pointing device on the left side | +|`POINTING_DEVICE_RIGHT` | Pointing device on the right side | +|`POINTING_DEVICE_COMBINED` | Pointing device on both sides | + +See the [Pointing Device](../feature_pointing_device.md) documentation for further configuration options. diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md index 5aef9bea27..f8de92f3b4 100644 --- a/docs/feature_pointing_device.md +++ b/docs/feature_pointing_device.md @@ -127,11 +127,10 @@ The Pimoroni Trackball module is a I2C based breakout board with an RGB enable t | Setting | Description | Default | |-------------------------------------|------------------------------------------------------------------------------------|---------| |`PIMORONI_TRACKBALL_ADDRESS` | (Required) Sets the I2C Address for the Pimoroni Trackball. | `0x0A` | -|`PIMORONI_TRACKBALL_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `100` | -|`PIMORONI_TRACKBALL_INTERVAL_MS` | (Optional) The update/read interval for the sensor in milliseconds. | `8` | +|`PIMORONI_TRACKBALL_TIMEOUT` | (Optional) The timeout for i2c communication with the trackball in milliseconds. | `100` | |`PIMORONI_TRACKBALL_SCALE` | (Optional) The multiplier used to generate reports from the sensor. | `5` | |`PIMORONI_TRACKBALL_DEBOUNCE_CYCLES` | (Optional) The number of scan cycles used for debouncing on the ball press. | `20` | -|`PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` | +|`PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` | ### PMW 3360 Sensor @@ -171,14 +170,35 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {} ## Common Configuration -| Setting | Description | Default | -|-------------------------------|-----------------------------------------------------------------------|---------------| -|`POINTING_DEVICE_ROTATION_90` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ | -|`POINTING_DEVICE_ROTATION_180` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ | -|`POINTING_DEVICE_ROTATION_270` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ | -|`POINTING_DEVICE_INVERT_X` | (Optional) Inverts the X axis report. | _not defined_ | -|`POINTING_DEVICE_INVERT_Y` | (Optional) Inverts the Y axis report. | _not defined_ | -|`POINTING_DEVICE_MOTION_PIN` | (Optional) If supported, will only read from sensor if pin is active. | _not defined_ | +| Setting | Description | Default | +|----------------------------------|-----------------------------------------------------------------------|-------------------| +|`POINTING_DEVICE_ROTATION_90` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ | +|`POINTING_DEVICE_ROTATION_180` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ | +|`POINTING_DEVICE_ROTATION_270` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ | +|`POINTING_DEVICE_INVERT_X` | (Optional) Inverts the X axis report. | _not defined_ | +|`POINTING_DEVICE_INVERT_Y` | (Optional) Inverts the Y axis report. | _not defined_ | +|`POINTING_DEVICE_MOTION_PIN` | (Optional) If supported, will only read from sensor if pin is active. | _not defined_ | +|`POINTING_DEVICE_TASK_THROTTLE_MS` | (Optional) Limits the frequency that the sensor is polled for motion. | _not defined_ | + +!> When using `SPLIT_POINTING_ENABLE` the `POINTING_DEVICE_MOTION_PIN` functionality is not supported and would recommend `POINTING_DEVICE_TASK_THROTTLE_MS` be set to `1`. Increasing this value will increase transport performance at the cost of possible mouse responsiveness. + + +## Split Keyboard Configuration + +The following configuration options are only available when using `SPLIT_POINTING_ENABLE` see [data sync options](feature_split_keyboard.md?id=data-sync-options). The rotation and invert `*_RIGHT` options are only used with `POINTING_DEVICE_COMBINED`. If using `POINTING_DEVICE_LEFT` or `POINTING_DEVICE_RIGHT` use the common configuration above to configure your pointing device. + +| Setting | Description | Default | +|----------------------------------------|-----------------------------------------------------------------------|---------------| +|`POINTING_DEVICE_LEFT` | Pointing device on the left side (Required - pick one only) | _not defined_ | +|`POINTING_DEVICE_RIGHT` | Pointing device on the right side (Required - pick one only) | _not defined_ | +|`POINTING_DEVICE_COMBINED` | Pointing device on both sides (Required - pick one only) | _not defined_ | +|`POINTING_DEVICE_ROTATION_90_RIGHT` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ | +|`POINTING_DEVICE_ROTATION_180_RIGHT` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ | +|`POINTING_DEVICE_ROTATION_270_RIGHT` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ | +|`POINTING_DEVICE_INVERT_X_RIGHT` | (Optional) Inverts the X axis report. | _not defined_ | +|`POINTING_DEVICE_INVERT_Y_RIGHT` | (Optional) Inverts the Y axis report. | _not defined_ | + +!> If there is a `_RIGHT` configuration option or callback, the [common configuration](feature_pointing_device.md?id=common-configuration) option will work for the left. For correct left/right detection you should setup a [handedness option](feature_split_keyboard?id=setting-handedness), `EE_HANDS` is usually a good option for an existing board that doesn't do handedness by hardware. ## Callbacks and Functions @@ -196,6 +216,21 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {} | `pointing_device_set_report(mouse_report)` | Sets the mouse report to the assigned `mouse_report_t` data structured passed to the function. | | `pointing_device_send(void)` | Sends the current mouse report to the host system. Function can be replaced. | | `has_mouse_report_changed(old, new)` | Compares the old and new `mouse_report_t` data and returns true only if it has changed. | +| `pointing_device_adjust_by_defines(mouse_report)` | Applies rotations and invert configurations to a raw mouse report. | + + +## Split Keyboard Callbacks and Functions + +The combined functions below are only available when using `SPLIT_POINTING_ENABLE` and `POINTING_DEVICE_COMBINED`. The 2 callbacks `pointing_device_task_combined_*` replace the single sided equivalents above. See the [combined pointing devices example](feature_pointing_device.md?id=combined-pointing-devices) + +| Function | Description | +|-----------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------| +| `pointing_device_set_shared_report(mouse_report)` | Sets the shared mouse report to the assigned `mouse_report_t` data structured passed to the function. | +| `pointing_device_set_cpi_on_side(bool, uint16_t)` | Sets the CPI/DPI of one side, if supported. Passing `true` will set the left and `false` the right` | +| `pointing_device_combine_reports(left_report, right_report)` | Returns a combined mouse_report of left_report and right_report (as a `mouse_report_t` data structure) | +| `pointing_device_task_combined_kb(left_report, right_report)` | Callback, so keyboard code can intercept and modify the data. Returns a combined mouse report. | +| `pointing_device_task_combined_user(left_report, right_report)` | Callback, so user code can intercept and modify. Returns a combined mouse report using `pointing_device_combine_reports` | +| `pointing_device_adjust_by_defines_right(mouse_report)` | Applies right side rotations and invert configurations to a raw mouse report. | # Manipulating Mouse Reports @@ -242,3 +277,62 @@ case MS_SPECIAL: ``` Recall that the mouse report is set to zero (except the buttons) whenever it is sent, so the scrolling would only occur once in each case. + +## Split Examples + +The following examples make use the `SPLIT_POINTING_ENABLE` functionality and show how to manipulate the mouse report for a scrolling mode. + +### Single Pointing Device + +The following example will work with either `POINTING_DEVICE_LEFT` or `POINTING_DEVICE_RIGHT` and enables scrolling mode while on a particular layer. + +```c + +static bool scrolling_mode = false; + +layer_state_t layer_state_set_user(layer_state_t state) { + switch (get_highest_layer(state)) { + case _RAISE: // If we're on the _RAISE layer enable scrolling mode + scrolling_mode = true; + pointing_device_set_cpi(2000); + break; + default: + if (scrolling_mode) { // check if we were scrolling before and set disable if so + scrolling_mode = false; + pointing_device_set_cpi(8000); + } + break; + } + return state; +} + +report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) { + if (scrolling_mode) { + mouse_report.h = mouse_report.x; + mouse_report.v = mouse_report.y; + mouse_report.x = 0; + mouse_report.y = 0; + } + return mouse_report; +} + +``` + +### Combined Pointing Devices + +The following example requires `POINTING_DEVICE_COMBINED` and sets the left side pointing device to scroll only. + +```c +void keyboard_post_init_user(void) { + pointing_device_set_cpi_on_side(true, 1000); //Set cpi on left side to a low value for slower scrolling. + pointing_device_set_cpi_on_side(false, 8000); //Set cpi on right side to a reasonable value for mousing. +} + +report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, report_mouse_t right_report) { + left_report.h = left_report.x; + left_report.v = left_report.y; + left_report.x = 0; + left_report.y = 0; + return pointing_device_combine_reports(left_report, right_report); +} +``` diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md index c8ba18beeb..b51593308e 100644 --- a/docs/feature_split_keyboard.md +++ b/docs/feature_split_keyboard.md @@ -266,6 +266,14 @@ This enables transmitting the current OLED on/off status to the slave side of th This enables transmitting the current ST7565 on/off status to the slave side of the split keyboard. The purpose of this feature is to support state (on/off state only) syncing. +```c +#define SPLIT_POINTING_ENABLE +``` + +This enables transmitting the pointing device status to the master side of the split keyboard. The purpose of this feature is to enable use pointing devices on the slave side. + +!> There is additional required configuration for `SPLIT_POINTING_ENABLE` outlined in the [pointing device documentation](feature_pointing_device.md?id=split-keyboard-configuration). + ### Custom data sync between sides :id=custom-data-sync QMK's split transport allows for arbitrary data transactions at both the keyboard and user levels. This is modelled on a remote procedure call, with the master invoking a function on the slave side, with the ability to send data from master to slave, process it slave side, and send data back from slave to master. diff --git a/drivers/sensors/pimoroni_trackball.c b/drivers/sensors/pimoroni_trackball.c index 7d390056ea..2867e763bc 100644 --- a/drivers/sensors/pimoroni_trackball.c +++ b/drivers/sensors/pimoroni_trackball.c @@ -33,8 +33,24 @@ static uint16_t precision = 128; -float pimoroni_trackball_get_precision(void) { return ((float)precision / 128); } -void pimoroni_trackball_set_precision(float floatprecision) { precision = (floatprecision * 128); } +uint16_t pimoroni_trackball_get_cpi(void) { return (precision * 125); } +/** + * @brief Sets the scaling value for pimoroni trackball + * + * Sets a scaling value for pimoroni trackball to allow runtime adjustment. This isn't used by the sensor and is an + * approximation so the functions are consistent across drivers. + * + * NOTE: This rounds down to the nearest number divisable by 125 that's a positive integer, values below 125 are clamped to 125. + * + * @param cpi uint16_t + */ +void pimoroni_trackball_set_cpi(uint16_t cpi) { + if (cpi < 249) { + precision = 1; + } else { + precision = (cpi - (cpi % 125)) / 125; + } +} void pimoroni_trackball_set_rgbw(uint8_t r, uint8_t g, uint8_t b, uint8_t w) { uint8_t data[4] = {r, g, b, w}; @@ -60,7 +76,7 @@ i2c_status_t read_pimoroni_trackball(pimoroni_data_t* data) { return status; } -__attribute__((weak)) void pimironi_trackball_device_init(void) { +__attribute__((weak)) void pimoroni_trackball_device_init(void) { i2c_init(); pimoroni_trackball_set_rgbw(0x00, 0x00, 0x00, 0x00); } diff --git a/drivers/sensors/pimoroni_trackball.h b/drivers/sensors/pimoroni_trackball.h index 59ee8724ba..e20ee748a7 100644 --- a/drivers/sensors/pimoroni_trackball.h +++ b/drivers/sensors/pimoroni_trackball.h @@ -23,9 +23,6 @@ #ifndef PIMORONI_TRACKBALL_ADDRESS # define PIMORONI_TRACKBALL_ADDRESS 0x0A #endif -#ifndef PIMORONI_TRACKBALL_INTERVAL_MS -# define PIMORONI_TRACKBALL_INTERVAL_MS 8 -#endif #ifndef PIMORONI_TRACKBALL_SCALE # define PIMORONI_TRACKBALL_SCALE 5 #endif @@ -52,10 +49,10 @@ typedef struct { uint8_t click; } pimoroni_data_t; -void pimironi_trackball_device_init(void); +void pimoroni_trackball_device_init(void); void pimoroni_trackball_set_rgbw(uint8_t red, uint8_t green, uint8_t blue, uint8_t white); int16_t pimoroni_trackball_get_offsets(uint8_t negative_dir, uint8_t positive_dir, uint8_t scale); void pimoroni_trackball_adapt_values(int8_t* mouse, int16_t* offset); -float pimoroni_trackball_get_precision(void); -void pimoroni_trackball_set_precision(float precision); +uint16_t pimoroni_trackball_get_cpi(void); +void pimoroni_trackball_set_cpi(uint16_t cpi); i2c_status_t read_pimoroni_trackball(pimoroni_data_t* data); diff --git a/quantum/pointing_device.c b/quantum/pointing_device.c index 2fefdb67b6..23d93fa15f 100644 --- a/quantum/pointing_device.c +++ b/quantum/pointing_device.c @@ -18,24 +18,105 @@ #include "pointing_device.h" #include <string.h> +#include "timer.h" #ifdef MOUSEKEY_ENABLE # include "mousekey.h" #endif #if (defined(POINTING_DEVICE_ROTATION_90) + defined(POINTING_DEVICE_ROTATION_180) + defined(POINTING_DEVICE_ROTATION_270)) > 1 # error More than one rotation selected. This is not supported. #endif +#if defined(SPLIT_POINTING_ENABLE) +# include "transactions.h" +# include "keyboard.h" -static report_mouse_t mouseReport = {}; +report_mouse_t shared_mouse_report = {}; +uint16_t shared_cpi = 0; + +/** + * @brief Sets the shared mouse report used be pointing device task + * + * NOTE : Only available when using SPLIT_POINTING_ENABLE + * + * @param[in] new_mouse_report report_mouse_t + */ +void pointing_device_set_shared_report(report_mouse_t new_mouse_report) { shared_mouse_report = new_mouse_report; } + +/** + * @brief Gets current pointing device CPI if supported + * + * Gets current cpi of the shared report and returns it as uint16_t + * + * NOTE : Only available when using SPLIT_POINTING_ENABLE + * + * @return cpi value as uint16_t + */ +uint16_t pointing_device_get_shared_cpi(void) { return shared_cpi; } + +# if defined(POINTING_DEVICE_LEFT) +# define POINTING_DEVICE_THIS_SIDE is_keyboard_left() +# elif defined(POINTING_DEVICE_RIGHT) +# define POINTING_DEVICE_THIS_SIDE !is_keyboard_left() +# elif defined(POINTING_DEVICE_COMBINED) +# define POINTING_DEVICE_THIS_SIDE true +# endif + +#endif // defined(SPLIT_POINTING_ENABLE) + +static report_mouse_t local_mouse_report = {}; extern const pointing_device_driver_t pointing_device_driver; +/** + * @brief Compares 2 mouse reports for difference and returns result + * + * @param[in] new report_mouse_t + * @param[in] old report_mouse_t + * @return bool result + */ __attribute__((weak)) bool has_mouse_report_changed(report_mouse_t new, report_mouse_t old) { return memcmp(&new, &old, sizeof(new)); } -__attribute__((weak)) void pointing_device_init_kb(void) {} -__attribute__((weak)) void pointing_device_init_user(void) {} +/** + * @brief Keyboard level code pointing device initialisation + * + */ +__attribute__((weak)) void pointing_device_init_kb(void) {} + +/** + * @brief User level code pointing device initialisation + * + */ +__attribute__((weak)) void pointing_device_init_user(void) {} + +/** + * @brief Weak function allowing for keyboard level mouse report modification + * + * Takes report_mouse_t struct allowing modification at keyboard level then returns report_mouse_t. + * + * @param[in] mouse_report report_mouse_t + * @return report_mouse_t + */ __attribute__((weak)) report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { return pointing_device_task_user(mouse_report); } + +/** + * @brief Weak function allowing for user level mouse report modification + * + * Takes report_mouse_t struct allowing modification at user level then returns report_mouse_t. + * + * @param[in] mouse_report report_mouse_t + * @return report_mouse_t + */ __attribute__((weak)) report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) { return mouse_report; } +/** + * @brief Handles pointing device buttons + * + * Returns modified button bitmask using bool pressed and selected pointing_device_buttons_t button in uint8_t buttons bitmask. + * + * @param buttons[in] uint8_t bitmask + * @param pressed[in] bool + * @param button[in] pointing_device_buttons_t value + * @return Modified uint8_t bitmask buttons + */ __attribute__((weak)) uint8_t pointing_device_handle_buttons(uint8_t buttons, bool pressed, pointing_device_buttons_t button) { if (pressed) { buttons |= 1 << (button); @@ -45,7 +126,17 @@ __attribute__((weak)) uint8_t pointing_device_handle_buttons(uint8_t buttons, bo return buttons; } +/** + * @brief Initialises pointing device + * + * Initialises pointing device, perform driver init and optional keyboard/user level code. + */ __attribute__((weak)) void pointing_device_init(void) { +#if defined(SPLIT_POINTING_ENABLE) + if (!(POINTING_DEVICE_THIS_SIDE)) { + return; + } +#endif pointing_device_driver.init(); #ifdef POINTING_DEVICE_MOTION_PIN setPinInputHigh(POINTING_DEVICE_MOTION_PIN); @@ -54,67 +145,299 @@ __attribute__((weak)) void pointing_device_init(void) { pointing_device_init_user(); } +/** + * @brief Sends processed mouse report to host + * + * This sends the mouse report generated by pointing_device_task if changed since the last report. Once send zeros mouse report except buttons. + * + */ __attribute__((weak)) void pointing_device_send(void) { static report_mouse_t old_report = {}; // If you need to do other things, like debugging, this is the place to do it. - if (has_mouse_report_changed(mouseReport, old_report)) { - host_mouse_send(&mouseReport); + if (has_mouse_report_changed(local_mouse_report, old_report)) { + host_mouse_send(&local_mouse_report); } // send it and 0 it out except for buttons, so those stay until they are explicity over-ridden using update_pointing_device - mouseReport.x = 0; - mouseReport.y = 0; - mouseReport.v = 0; - mouseReport.h = 0; + local_mouse_report.x = 0; + local_mouse_report.y = 0; + local_mouse_report.v = 0; + local_mouse_report.h = 0; - memcpy(&old_report, &mouseReport, sizeof(mouseReport)); + memcpy(&old_report, &local_mouse_report, sizeof(local_mouse_report)); } -__attribute__((weak)) void pointing_device_task(void) { - // Gather report info -#ifdef POINTING_DEVICE_MOTION_PIN - if (!readPin(POINTING_DEVICE_MOTION_PIN)) -#endif - mouseReport = pointing_device_driver.get_report(mouseReport); - - // Support rotation of the sensor data +/** + * @brief Adjust mouse report by any optional common pointing configuration defines + * + * This applies rotation or inversion to the mouse report as selected by the pointing device common configuration defines. + * + * @param mouse_report[in] takes a report_mouse_t to be adjusted + * @return report_mouse_t with adjusted values + */ +report_mouse_t pointing_device_adjust_by_defines(report_mouse_t mouse_report) { + // Support rotation of the sensor data #if defined(POINTING_DEVICE_ROTATION_90) || defined(POINTING_DEVICE_ROTATION_180) || defined(POINTING_DEVICE_ROTATION_270) - int8_t x = mouseReport.x, y = mouseReport.y; + int8_t x = mouse_report.x, y = mouse_report.y; # if defined(POINTING_DEVICE_ROTATION_90) - mouseReport.x = y; - mouseReport.y = -x; + mouse_report.x = y; + mouse_report.y = -x; # elif defined(POINTING_DEVICE_ROTATION_180) - mouseReport.x = -x; - mouseReport.y = -y; + mouse_report.x = -x; + mouse_report.y = -y; # elif defined(POINTING_DEVICE_ROTATION_270) - mouseReport.x = -y; - mouseReport.y = x; + mouse_report.x = -y; + mouse_report.y = x; # else # error "How the heck did you get here?!" # endif #endif // Support Inverting the X and Y Axises #if defined(POINTING_DEVICE_INVERT_X) - mouseReport.x = -mouseReport.x; + mouse_report.x = -mouse_report.x; #endif #if defined(POINTING_DEVICE_INVERT_Y) - mouseReport.y = -mouseReport.y; + mouse_report.y = -mouse_report.y; +#endif + return mouse_report; +} + +/** + * @brief Retrieves and processes pointing device data. + * + * This function is part of the keyboard loop and retrieves the mouse report from the pointing device driver. + * It applies any optional configuration e.g. rotation or axis inversion and then initiates a send. + * + */ +__attribute__((weak)) void pointing_device_task(void) { +#if defined(SPLIT_POINTING_ENABLE) + // Don't poll the target side pointing device. + if (!is_keyboard_master()) { + return; + }; +#endif + +#if defined(POINTING_DEVICE_TASK_THROTTLE_MS) + static uint32_t last_exec = 0; + if (timer_elapsed32(last_exec) < POINTING_DEVICE_TASK_THROTTLE_MS) { + return; + } + last_exec = timer_read32(); +#else +# if defined(SPLIT_POINTING_ENABLE) +# pragma message("It's recommended you enable a throttle when sharing pointing devices.") +# endif +#endif + + // Gather report info +#ifdef POINTING_DEVICE_MOTION_PIN +# if defined(SPLIT_POINTING_ENABLE) +# error POINTING_DEVICE_MOTION_PIN not supported when sharing the pointing device report between sides. +# endif + if (!readPin(POINTING_DEVICE_MOTION_PIN)) #endif +#if defined(SPLIT_POINTING_ENABLE) +# if defined(POINTING_DEVICE_COMBINED) + static uint8_t old_buttons = 0; + local_mouse_report.buttons = old_buttons; + local_mouse_report = pointing_device_driver.get_report(local_mouse_report); + old_buttons = local_mouse_report.buttons; +# elif defined(POINTING_DEVICE_LEFT) || defined(POINTING_DEVICE_RIGHT) + local_mouse_report = POINTING_DEVICE_THIS_SIDE ? pointing_device_driver.get_report(local_mouse_report) : shared_mouse_report; +# else +# error "You need to define the side(s) the pointing device is on. POINTING_DEVICE_COMBINED / POINTING_DEVICE_LEFT / POINTING_DEVICE_RIGHT" +# endif +#else + local_mouse_report = pointing_device_driver.get_report(local_mouse_report); +#endif // defined(SPLIT_POINTING_ENABLE) + // allow kb to intercept and modify report - mouseReport = pointing_device_task_kb(mouseReport); +#if defined(SPLIT_POINTING_ENABLE) && defined(POINTING_DEVICE_COMBINED) + if (is_keyboard_left()) { + local_mouse_report = pointing_device_adjust_by_defines(local_mouse_report); + shared_mouse_report = pointing_device_adjust_by_defines_right(shared_mouse_report); + } else { + local_mouse_report = pointing_device_adjust_by_defines_right(local_mouse_report); + shared_mouse_report = pointing_device_adjust_by_defines(shared_mouse_report); + } + local_mouse_report = is_keyboard_left() ? pointing_device_task_combined_kb(local_mouse_report, shared_mouse_report) : pointing_device_task_combined_kb(shared_mouse_report, local_mouse_report); +#else + local_mouse_report = pointing_device_adjust_by_defines(local_mouse_report); + local_mouse_report = pointing_device_task_kb(local_mouse_report); +#endif // combine with mouse report to ensure that the combined is sent correctly #ifdef MOUSEKEY_ENABLE report_mouse_t mousekey_report = mousekey_get_report(); - mouseReport.buttons = mouseReport.buttons | mousekey_report.buttons; + local_mouse_report.buttons = local_mouse_report.buttons | mousekey_report.buttons; #endif pointing_device_send(); } -report_mouse_t pointing_device_get_report(void) { return mouseReport; } +/** + * @brief Gets current mouse report used by pointing device task + * + * @return report_mouse_t + */ +report_mouse_t pointing_device_get_report(void) { return local_mouse_report; } + +/** + * @brief Sets mouse report used be pointing device task + * + * @param[in] new_mouse_report + */ +void pointing_device_set_report(report_mouse_t new_mouse_report) { local_mouse_report = new_mouse_report; } + +/** + * @brief Gets current pointing device CPI if supported + * + * Gets current cpi from pointing device driver if supported and returns it as uint16_t + * + * @return cpi value as uint16_t + */ +uint16_t pointing_device_get_cpi(void) { +#if defined(SPLIT_POINTING_ENABLE) + return POINTING_DEVICE_THIS_SIDE ? pointing_device_driver.get_cpi() : shared_cpi; +#else + return pointing_device_driver.get_cpi(); +#endif +} -void pointing_device_set_report(report_mouse_t newMouseReport) { mouseReport = newMouseReport; } +/** + * @brief Set pointing device CPI if supported + * + * Takes a uint16_t value to set pointing device cpi if supported by driver. + * + * @param[in] cpi uint16_t value. + */ +void pointing_device_set_cpi(uint16_t cpi) { +#if defined(SPLIT_POINTING_ENABLE) + if (POINTING_DEVICE_THIS_SIDE) { + pointing_device_driver.set_cpi(cpi); + } else { + shared_cpi = cpi; + } +#else + pointing_device_driver.set_cpi(cpi); +#endif +} -uint16_t pointing_device_get_cpi(void) { return pointing_device_driver.get_cpi(); } +#if defined(SPLIT_POINTING_ENABLE) && defined(POINTING_DEVICE_COMBINED) +/** + * @brief Set pointing device CPI if supported + * + * Takes a bool and uint16_t and allows setting cpi for a single side when using 2 pointing devices with a split keyboard. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] left true = left, false = right. + * @param[in] cpi uint16_t value. + */ +void pointing_device_set_cpi_on_side(bool left, uint16_t cpi) { + bool local = (is_keyboard_left() & left) ? true : false; + if (local) { + pointing_device_driver.set_cpi(cpi); + } else { + shared_cpi = cpi; + } +} -void pointing_device_set_cpi(uint16_t cpi) { pointing_device_driver.set_cpi(cpi); } +/** + * @brief clamps int16_t to int8_t + * + * @param[in] int16_t value + * @return int8_t clamped value + */ +static inline int8_t pointing_device_movement_clamp(int16_t value) { + if (value < INT8_MIN) { + return INT8_MIN; + } else if (value > INT8_MAX) { + return INT8_MAX; + } else { + return value; + } +} + +/** + * @brief combines 2 mouse reports and returns 2 + * + * Combines 2 report_mouse_t structs, clamping movement values to int8_t and ignores report_id then returns the resulting report_mouse_t struct. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] left_report left report_mouse_t + * @param[in] right_report right report_mouse_t + * @return combined report_mouse_t of left_report and right_report + */ +report_mouse_t pointing_device_combine_reports(report_mouse_t left_report, report_mouse_t right_report) { + left_report.x = pointing_device_movement_clamp((int16_t)left_report.x + right_report.x); + left_report.y = pointing_device_movement_clamp((int16_t)left_report.y + right_report.y); + left_report.h = pointing_device_movement_clamp((int16_t)left_report.h + right_report.h); + left_report.v = pointing_device_movement_clamp((int16_t)left_report.v + right_report.v); + left_report.buttons |= right_report.buttons; + return left_report; +} + +/** + * @brief Adjust mouse report by any optional right pointing configuration defines + * + * This applies rotation or inversion to the mouse report as selected by the pointing device common configuration defines. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] mouse_report report_mouse_t to be adjusted + * @return report_mouse_t with adjusted values + */ +report_mouse_t pointing_device_adjust_by_defines_right(report_mouse_t mouse_report) { + // Support rotation of the sensor data +# if defined(POINTING_DEVICE_ROTATION_90_RIGHT) || defined(POINTING_DEVICE_ROTATION_RIGHT) || defined(POINTING_DEVICE_ROTATION_RIGHT) + int8_t x = mouse_report.x, y = mouse_report.y; +# if defined(POINTING_DEVICE_ROTATION_90_RIGHT) + mouse_report.x = y; + mouse_report.y = -x; +# elif defined(POINTING_DEVICE_ROTATION_180_RIGHT) + mouse_report.x = -x; + mouse_report.y = -y; +# elif defined(POINTING_DEVICE_ROTATION_270_RIGHT) + mouse_report.x = -y; + mouse_report.y = x; +# else +# error "How the heck did you get here?!" +# endif +# endif + // Support Inverting the X and Y Axises +# if defined(POINTING_DEVICE_INVERT_X_RIGHT) + mouse_report.x = -mouse_report.x; +# endif +# if defined(POINTING_DEVICE_INVERT_Y_RIGHT) + mouse_report.y = -mouse_report.y; +# endif + return mouse_report; +} + +/** + * @brief Weak function allowing for keyboard level mouse report modification + * + * Takes 2 report_mouse_t structs allowing individual modification of sides at keyboard level then returns pointing_device_task_combined_user. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] left_report report_mouse_t + * @param[in] right_report report_mouse_t + * @return pointing_device_task_combined_user(left_report, right_report) by default + */ +__attribute__((weak)) report_mouse_t pointing_device_task_combined_kb(report_mouse_t left_report, report_mouse_t right_report) { return pointing_device_task_combined_user(left_report, right_report); } + +/** + * @brief Weak function allowing for user level mouse report modification + * + * Takes 2 report_mouse_t structs allowing individual modification of sides at user level then returns pointing_device_combine_reports. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] left_report report_mouse_t + * @param[in] right_report report_mouse_t + * @return pointing_device_combine_reports(left_report, right_report) by default + */ +__attribute__((weak)) report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, report_mouse_t right_report) { return pointing_device_combine_reports(left_report, right_report); } +#endif diff --git a/quantum/pointing_device.h b/quantum/pointing_device.h index 5106c26660..78398d8999 100644 --- a/quantum/pointing_device.h +++ b/quantum/pointing_device.h @@ -86,3 +86,16 @@ void pointing_device_init_user(void); report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report); report_mouse_t pointing_device_task_user(report_mouse_t mouse_report); uint8_t pointing_device_handle_buttons(uint8_t buttons, bool pressed, pointing_device_buttons_t button); +report_mouse_t pointing_device_adjust_by_defines(report_mouse_t mouse_report); + +#if defined(SPLIT_POINTING_ENABLE) +void pointing_device_set_shared_report(report_mouse_t report); +uint16_t pointing_device_get_shared_cpi(void); +# if defined(POINTING_DEVICE_COMBINED) +void pointing_device_set_cpi_on_side(bool left, uint16_t cpi); +report_mouse_t pointing_device_combine_reports(report_mouse_t left_report, report_mouse_t right_report); +report_mouse_t pointing_device_task_combined_kb(report_mouse_t left_report, report_mouse_t right_report); +report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, report_mouse_t right_report); +report_mouse_t pointing_device_adjust_by_defines_right(report_mouse_t mouse_report); +# endif //defined(POINTING_DEVICE_COMBINED) +#endif //defined(SPLIT_POINTING_ENABLE) diff --git a/quantum/pointing_device_drivers.c b/quantum/pointing_device_drivers.c index 9ad5e76ba6..0852a0bea7 100644 --- a/quantum/pointing_device_drivers.c +++ b/quantum/pointing_device_drivers.c @@ -165,14 +165,13 @@ const pointing_device_driver_t pointing_device_driver = { // clang-format on #elif defined(POINTING_DEVICE_DRIVER_pimoroni_trackball) -report_mouse_t pimorono_trackball_get_report(report_mouse_t mouse_report) { - static fast_timer_t throttle = 0; - static uint16_t debounce = 0; - static uint8_t error_count = 0; - pimoroni_data_t pimoroni_data = {0}; - static int16_t x_offset = 0, y_offset = 0; - - if (error_count < PIMORONI_TRACKBALL_ERROR_COUNT && timer_elapsed_fast(throttle) >= PIMORONI_TRACKBALL_INTERVAL_MS) { +report_mouse_t pimoroni_trackball_get_report(report_mouse_t mouse_report) { + static uint16_t debounce = 0; + static uint8_t error_count = 0; + pimoroni_data_t pimoroni_data = {0}; + static int16_t x_offset = 0, y_offset = 0; + + if (error_count < PIMORONI_TRACKBALL_ERROR_COUNT) { i2c_status_t status = read_pimoroni_trackball(&pimoroni_data); if (status == I2C_STATUS_SUCCESS) { @@ -195,17 +194,16 @@ report_mouse_t pimorono_trackball_get_report(report_mouse_t mouse_report) { } else { error_count++; } - throttle = timer_read_fast(); } return mouse_report; } // clang-format off const pointing_device_driver_t pointing_device_driver = { - .init = pimironi_trackball_device_init, - .get_report = pimorono_trackball_get_report, - .set_cpi = NULL, - .get_cpi = NULL + .init = pimoroni_trackball_device_init, + .get_report = pimoroni_trackball_get_report, + .set_cpi = pimoroni_trackball_set_cpi, + .get_cpi = pimoroni_trackball_get_cpi }; // clang-format on #elif defined(POINTING_DEVICE_DRIVER_pmw3360) diff --git a/quantum/split_common/transaction_id_define.h b/quantum/split_common/transaction_id_define.h index 535bc21aea..aa71c3621e 100644 --- a/quantum/split_common/transaction_id_define.h +++ b/quantum/split_common/transaction_id_define.h @@ -78,6 +78,12 @@ enum serial_transaction_id { PUT_ST7565, #endif // defined(ST7565_ENABLE) && defined(SPLIT_ST7565_ENABLE) +#if defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + GET_POINTING_CHECKSUM, + GET_POINTING_DATA, + PUT_POINTING_CPI, +#endif // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + #if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER) PUT_RPC_INFO, PUT_RPC |