diff options
-rw-r--r-- | keyboards/jj4x4/README.md | 71 | ||||
-rw-r--r-- | keyboards/jj4x4/backlight.c | 213 | ||||
-rw-r--r-- | keyboards/jj4x4/backlight_custom.h | 15 | ||||
-rw-r--r-- | keyboards/jj4x4/breathing_custom.h | 140 | ||||
-rw-r--r-- | keyboards/jj4x4/config.h | 53 | ||||
-rw-r--r-- | keyboards/jj4x4/i2c.c | 104 | ||||
-rw-r--r-- | keyboards/jj4x4/i2c.h | 25 | ||||
-rw-r--r-- | keyboards/jj4x4/info.json | 23 | ||||
-rw-r--r-- | keyboards/jj4x4/jj4x4.c | 97 | ||||
-rw-r--r-- | keyboards/jj4x4/jj4x4.h | 46 | ||||
-rw-r--r-- | keyboards/jj4x4/keymaps/default/keymap.c | 34 | ||||
-rw-r--r-- | keyboards/jj4x4/rules.mk | 58 | ||||
-rw-r--r-- | keyboards/jj4x4/tools/README.md | 16 | ||||
-rw-r--r-- | keyboards/jj4x4/tools/usb_detach.c | 33 | ||||
-rw-r--r-- | keyboards/jj4x4/usbconfig.h | 397 |
15 files changed, 1325 insertions, 0 deletions
diff --git a/keyboards/jj4x4/README.md b/keyboards/jj4x4/README.md new file mode 100644 index 0000000000..09684bd825 --- /dev/null +++ b/keyboards/jj4x4/README.md @@ -0,0 +1,71 @@ +# jj4x4 + +![jj4x4](https://cdn.shopify.com/s/files/1/2711/4238/products/JJ4x4case-1_1024x1024.jpg?v=1532325339) + +A 4x4 keypad kit made and KPRepublic on AliExpress. This is a chopped off version of the jj40 with rearranged keys. + +Keyboard Maintainer: [QMK Community](https://github.com/qmk) +Hardware Supported: Atmega32A +Hardware Availability: [AliExpress](https://www.aliexpress.com/item/jj4x4-jj4X4-16-keys-Custom-Mechanical-Keyboard-PCB-programmed-numpad-layouts-bface-firmware-with-rgb-bottom/32901955446.html?spm=2114.search0104.3.7.3ebf431ae1d9ic&ws_ab_test=searchweb0_0,searchweb201602_4_10065_10130_10068_10547_319_317_10548_10545_10696_453_10084_454_10083_433_10618_431_10307_537_536_10902_10059_10884_10887_321_322_10103,searchweb201603_6,ppcSwitch_0&algo_expid=9d1891dd-80af-4793-a889-5a62e1fdfdd8-1&algo_pvid=9d1891dd-80af-4793-a889-5a62e1fdfdd8&transAbTest=ae803_5) + +Make example for this keyboard (after setting up your build environment): + + make jj4x4:default:program + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. + +Note that this is a complete replacement for the firmware, so you won't be +using Bootmapper Client to change any keyboard settings, since not all the +USB report options are supported. + +In addition you may need the AVR toolchain and `bootloadHID` ([GitHub repo](https://github.com/whiteneon/bootloadHID)) for flashing: + +For macOS: +``` +$ brew cask install crosspack-avr +$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb +``` + +For Linux: +``` +$ sudo apt install libusb-dev +$ wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz +$ tar -xzf bootloadHID.2012-12-08.tar.gz +$ cd bootloadHID.2012-12-08/commandline +$ make +$ sudo cp bootloadHID /usr/bin +``` + +In order to use the `./program` script, which can reboot the board into +the bootloader, you'll need Python 2 with PyUSB installed: + +``` +$ pip install pyusb +``` + +If you prefer (or are having issues with a `program` flash), you can just build it (`make jj40:<keymap-name>` and flash the firmware (`.hex` file) directly with +`bootloadHID` if you boot the board while holding down `8` (second from top, second from left, with usb plug is at the top) to keep it +in the bootloader: + +``` +$ make jj40 +$ bootloadHID -r jj4x4_default.hex +``` + +For Windows 10: +Windows sometimes doesn't recognize the jj4x4. The easiest way of flashing a new layout is probably using [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). +1. Go to Windows Device Manager and find the keyboard (plug it in while holding down `8` (second from top, second from left, with usb plug is at the top)). It can be found under Human Interface Devices or under Keyboards. +2. Go to properties and the Details tab to find the hardware ID. You want the VID and the PID (code after the underscore). Plug them into HIDBootFlash and hit Find Device. +3. Use `make jj4x4:<keymap-name>` to generate the .hex file in the qmk basis folder. Select the .hex file in HIDBootFlash and press Flash Device. + + +## Troubleshooting + +1. Try plugging the board in while pressing `8` (usb plug at top, second from top, second from left). This will force it + to boot only the bootloader without loading the firmware. Once this is + done, just reflash the board with the original firmware. +2. Sometimes USB hubs can act weird, so try connecting the board directly + to your computer or plugging/unplugging the USB hub. +3. If you get an error such as "Resource Unavailable" when attemting to flash + on Linux, you may want to compile and run `tools/usb_detach.c`. See `tools/README.md` + for more info. diff --git a/keyboards/jj4x4/backlight.c b/keyboards/jj4x4/backlight.c new file mode 100644 index 0000000000..fbd241fa9d --- /dev/null +++ b/keyboards/jj4x4/backlight.c @@ -0,0 +1,213 @@ +/** + * Backlighting code for PS2AVRGB boards (ATMEGA32A) + * Kenneth A. (github.com/krusli | krusli.me) + */ + +#include "backlight.h" +#include "quantum.h" + +#include <avr/pgmspace.h> +#include <avr/interrupt.h> + +#include "backlight_custom.h" +#include "breathing_custom.h" + +// DEBUG +#include <stdlib.h> +#include <stdio.h> + +// Port D: digital pins of the AVR chipset +#define NUMLOCK_PORT (1 << 0) // D0 +#define CAPSLOCK_PORT (1 << 1) // D1 +#define BACKLIGHT_PORT (1 << 4) // D4 +#define SCROLLLOCK_PORT (1 << 6) // D6 + +#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64 +#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default + +#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask + +#define PWM_MAX 0xFF +#define TIMER_TOP 255 // 8 bit PWM + +extern backlight_config_t backlight_config; + +/** + * References + * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation + * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b + * Timers: http://www.avrbeginners.net/architecture/timers/timers.html + * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/ + * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware + */ + +// @Override +// turn LEDs on and off depending on USB caps/num/scroll lock states. +__attribute__ ((weak)) +void led_set_user(uint8_t usb_led) { + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + // turn on + DDRD |= NUMLOCK_PORT; + PORTD |= NUMLOCK_PORT; + } else { + // turn off + DDRD &= ~NUMLOCK_PORT; + PORTD &= ~NUMLOCK_PORT; + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + DDRD |= CAPSLOCK_PORT; + PORTD |= CAPSLOCK_PORT; + } else { + DDRD &= ~CAPSLOCK_PORT; + PORTD &= ~CAPSLOCK_PORT; + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + DDRD |= SCROLLLOCK_PORT; + PORTD |= SCROLLLOCK_PORT; + } else { + DDRD &= ~SCROLLLOCK_PORT; + PORTD &= ~SCROLLLOCK_PORT; + } +} + +#ifdef BACKLIGHT_ENABLE + +// sets up Timer 1 for 8-bit PWM +void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE + // default 8 bit mode + TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH + TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW + + // clear output compare value A + // outb(OCR1AH, 0); + // outb(OCR1AL, 0); + + // clear output comparator registers for B + OCR1BH = 0; // outb(OCR1BH, 0); + OCR1BL = 0; // outb(OCR1BL, 0); +} + +bool is_init = false; +void timer1Init(void) { + // timer1SetPrescaler(TIMER1PRESCALE) + // set to DIV/64 + (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE; + + // reset TCNT1 + TCNT1H = 0; // outb(TCNT1H, 0); + TCNT1L = 0; // outb(TCNT1L, 0); + + // TOIE1: Timer Overflow Interrupt Enable (Timer 1); + TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1); + + is_init = true; +} + +void timer1UnInit(void) { + // set prescaler back to NONE + (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP + + // disable timer overflow interrupt + TIMSK &= ~_BV(TOIE1); // overflow bit? + + setPWM(0); + + is_init = false; +} + + +// handle TCNT1 overflow +//! Interrupt handler for tcnt1 overflow interrupt +ISR(TIMER1_OVF_vect, ISR_NOBLOCK) +{ + // sei(); + // handle breathing here + #ifdef BACKLIGHT_BREATHING + if (is_breathing()) { + custom_breathing_handler(); + } + #endif + + // TODO call user defined function +} + +// enable timer 1 PWM +// timer1PWMBOn() +void timer1PWMBEnable(void) { + // turn on channel B (OC1B) PWM output + // set OC1B as non-inverted PWM + TCCR1A |= _BV(COM1B1); + TCCR1A &= ~_BV(COM1B0); +} + +// disable timer 1 PWM +// timer1PWMBOff() +void timer1PWMBDisable(void) { + TCCR1A &= ~_BV(COM1B1); + TCCR1A &= ~_BV(COM1B0); +} + +void enableBacklight(void) { + DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output + PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high +} + +void disableBacklight(void) { + // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input + PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low +} + +void startPWM(void) { + timer1Init(); + timer1PWMBEnable(); + enableBacklight(); +} + +void stopPWM(void) { + timer1UnInit(); + disableBacklight(); + timer1PWMBDisable(); +} + +void b_led_init_ports(void) { + /* turn backlight on/off depending on user preference */ + #if BACKLIGHT_ON_STATE == 0 + // DDRx register: sets the direction of Port D + // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input + PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low + #else + DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output + PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high + #endif + + timer1PWMSetup(); + startPWM(); + + #ifdef BACKLIGHT_BREATHING + breathing_enable(); + #endif +} + +void b_led_set(uint8_t level) { + if (level > BACKLIGHT_LEVELS) { + level = BACKLIGHT_LEVELS; + } + + setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS)); +} + +// called every matrix scan +void b_led_task(void) { + // do nothing for now +} + +void setPWM(uint16_t xValue) { + if (xValue > TIMER_TOP) { + xValue = TIMER_TOP; + } + OCR1B = xValue; // timer1PWMBSet(xValue); +} + +#endif // BACKLIGHT_ENABLE diff --git a/keyboards/jj4x4/backlight_custom.h b/keyboards/jj4x4/backlight_custom.h new file mode 100644 index 0000000000..7210be840e --- /dev/null +++ b/keyboards/jj4x4/backlight_custom.h @@ -0,0 +1,15 @@ +/** + * Backlighting code for PS2AVRGB boards (ATMEGA32A) + * Kenneth A. (github.com/krusli | krusli.me) + */ + +#ifndef BACKLIGHT_CUSTOM_H +#define BACKLIGHT_CUSTOM_H + +#include <avr/pgmspace.h> +void b_led_init_ports(void); +void b_led_set(uint8_t level); +void b_led_task(void); +void setPWM(uint16_t xValue); + +#endif // BACKLIGHT_CUSTOM_H diff --git a/keyboards/jj4x4/breathing_custom.h b/keyboards/jj4x4/breathing_custom.h new file mode 100644 index 0000000000..71416b1b45 --- /dev/null +++ b/keyboards/jj4x4/breathing_custom.h @@ -0,0 +1,140 @@ +/** + * Breathing effect code for PS2AVRGB boards (ATMEGA32A) + * Works in conjunction with `backlight.c`. + * + * Code adapted from `quantum.c` to register with the existing TIMER1 overflow + * handler in `backlight.c` instead of setting up its own timer. + * Kenneth A. (github.com/krusli | krusli.me) + */ + +#ifdef BACKLIGHT_ENABLE +#ifdef BACKLIGHT_BREATHING + +#include "backlight_custom.h" + +#ifndef BREATHING_PERIOD +#define BREATHING_PERIOD 6 +#endif + +#define breathing_min() do {breathing_counter = 0;} while (0) +#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0) + +// TODO make this share code with quantum.c + +#define BREATHING_NO_HALT 0 +#define BREATHING_HALT_OFF 1 +#define BREATHING_HALT_ON 2 +#define BREATHING_STEPS 128 + +static uint8_t breathing_period = BREATHING_PERIOD; +static uint8_t breathing_halt = BREATHING_NO_HALT; +static uint16_t breathing_counter = 0; + +static bool breathing = false; + +bool is_breathing(void) { + return breathing; +} + +// See http://jared.geek.nz/2013/feb/linear-led-pwm +static uint16_t cie_lightness(uint16_t v) { + if (v <= 5243) // if below 8% of max + return v / 9; // same as dividing by 900% + else { + uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare + // to get a useful result with integer division, we shift left in the expression above + // and revert what we've done again after squaring. + y = y * y * y >> 8; + if (y > 0xFFFFUL) // prevent overflow + return 0xFFFFU; + else + return (uint16_t) y; + } +} + +void breathing_enable(void) { + breathing = true; + breathing_counter = 0; + breathing_halt = BREATHING_NO_HALT; + // interrupt already registered +} + +void breathing_pulse(void) { + if (get_backlight_level() == 0) + breathing_min(); + else + breathing_max(); + breathing_halt = BREATHING_HALT_ON; + // breathing_interrupt_enable(); + breathing = true; +} + +void breathing_disable(void) { + breathing = false; + // backlight_set(get_backlight_level()); + b_led_set(get_backlight_level()); // custom implementation of backlight_set() +} + +void breathing_self_disable(void) +{ + if (get_backlight_level() == 0) + breathing_halt = BREATHING_HALT_OFF; + else + breathing_halt = BREATHING_HALT_ON; +} + +void breathing_toggle(void) { + if (is_breathing()) + breathing_disable(); + else + breathing_enable(); +} + +void breathing_period_set(uint8_t value) +{ + if (!value) + value = 1; + breathing_period = value; +} + +void breathing_period_default(void) { + breathing_period_set(BREATHING_PERIOD); +} + +void breathing_period_inc(void) +{ + breathing_period_set(breathing_period+1); +} + +void breathing_period_dec(void) +{ + breathing_period_set(breathing_period-1); +} + +/* To generate breathing curve in python: + * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] + */ +static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; + +// Use this before the cie_lightness function. +static inline uint16_t scale_backlight(uint16_t v) { + return v / BACKLIGHT_LEVELS * get_backlight_level(); +} + +void custom_breathing_handler(void) { + uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; + // resetting after one period to prevent ugly reset at overflow. + breathing_counter = (breathing_counter + 1) % (breathing_period * 244); + uint8_t index = breathing_counter / interval % BREATHING_STEPS; + + if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || + ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) + { + // breathing_interrupt_disable(); + } + + setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U))); +} + +#endif // BACKLIGHT_BREATHING +#endif // BACKLIGHT_ENABLE diff --git a/keyboards/jj4x4/config.h b/keyboards/jj4x4/config.h new file mode 100644 index 0000000000..d48df5f1db --- /dev/null +++ b/keyboards/jj4x4/config.h @@ -0,0 +1,53 @@ +/* +Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "config_common.h" + +#ifndef CONFIG_H +#define CONFIG_H + +#define VENDOR_ID 0x20A0 +#define PRODUCT_ID 0x422D +// TODO: share these strings with usbconfig.h +// Edit usbconfig.h to change these. +#define MANUFACTURER Kprepublic +#define PRODUCT jj4x4 + +/* matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 4 +#define MATRIX_ROW_PINS { B5, B0, B3, B4 } +#define MATRIX_COL_PINS { A1, A0, A2, A3 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_LEVELS 12 +// #define BACKLIGHT_BREATHING // works, but BL_TOGG might not work + +#define TAPPING_TOGGLE 3 + +#define NO_UART 1 + +/* RGB underglow */ +// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. +// The same pin is used on the JJ40, at least. +#define RGBLED_NUM 5 +#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. +#define RGBLIGHT_ANIMATIONS + +#endif diff --git a/keyboards/jj4x4/i2c.c b/keyboards/jj4x4/i2c.c new file mode 100644 index 0000000000..c27f3e3d17 --- /dev/null +++ b/keyboards/jj4x4/i2c.c @@ -0,0 +1,104 @@ +/* +Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include <util/twi.h> + +#include "i2c.h" + +void i2c_set_bitrate(uint16_t bitrate_khz) { + uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); + if (bitrate_div >= 16) { + bitrate_div = (bitrate_div - 16) / 2; + } + TWBR = bitrate_div; +} + +void i2c_init(void) { + // set pull-up resistors on I2C bus pins + PORTC |= 0b11; + + i2c_set_bitrate(400); + + // enable TWI (two-wire interface) + TWCR |= (1 << TWEN); + + // enable TWI interrupt and slave address ACK + TWCR |= (1 << TWIE); + TWCR |= (1 << TWEA); +} + +uint8_t i2c_start(uint8_t address) { + // reset TWI control register + TWCR = 0; + + // begin transmission and wait for it to end + TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); + while (!(TWCR & (1<<TWINT))); + + // check if the start condition was successfully transmitted + if ((TWSR & 0xF8) != TW_START) { + return 1; + } + + // transmit address and wait + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + while (!(TWCR & (1<<TWINT))); + + // check if the device has acknowledged the READ / WRITE mode + uint8_t twst = TW_STATUS & 0xF8; + if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) { + return 1; + } + + return 0; +} + +void i2c_stop(void) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); +} + +uint8_t i2c_write(uint8_t data) { + TWDR = data; + + // transmit data and wait + TWCR = (1<<TWINT) | (1<<TWEN); + while (!(TWCR & (1<<TWINT))); + + if ((TWSR & 0xF8) != TW_MT_DATA_ACK) { + return 1; + } + + return 0; +} + +uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) { + if (i2c_start(address)) { + return 1; + } + + for (uint16_t i = 0; i < length; i++) { + if (i2c_write(data[i])) { + return 1; + } + } + + i2c_stop(); + + return 0; +} diff --git a/keyboards/jj4x4/i2c.h b/keyboards/jj4x4/i2c.h new file mode 100644 index 0000000000..27c9d3d050 --- /dev/null +++ b/keyboards/jj4x4/i2c.h @@ -0,0 +1,25 @@ +/* +Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef __I2C_H__ +#define __I2C_H__ + +void i2c_init(void); +void i2c_set_bitrate(uint16_t bitrate_khz); +uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); + +#endif diff --git a/keyboards/jj4x4/info.json b/keyboards/jj4x4/info.json new file mode 100644 index 0000000000..c6416ce168 --- /dev/null +++ b/keyboards/jj4x4/info.json @@ -0,0 +1,23 @@ +{ + "keyboard_name": "jj40", + "url": "", + "maintainer": "qmk", + "width": 12, + "height": 4, + "layouts": { + "LAYOUT_planck_mit": { + "key_count": 47, + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3, "w":2}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] + }, + + "LAYOUT_ortho_4x12": { + "key_count": 48, + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] + }, + + "LAYOUT_planck_1x2uR": { + "key_count": 47, + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3, "w":2}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] + } + } +} diff --git a/keyboards/jj4x4/jj4x4.c b/keyboards/jj4x4/jj4x4.c new file mode 100644 index 0000000000..6fbff7afba --- /dev/null +++ b/keyboards/jj4x4/jj4x4.c @@ -0,0 +1,97 @@ +/* +Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> +Modified 2018 Kenneth A. <github.com/krusli> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "jj4x4.h" + +#include <avr/pgmspace.h> + +#include "action_layer.h" +#include "quantum.h" + +#include "i2c.h" + +#include "backlight.h" +#include "backlight_custom.h" + +// for keyboard subdirectory level init functions +// @Override +void matrix_init_kb(void) { + // call user level keymaps, if any + matrix_init_user(); +} + +#ifdef BACKLIGHT_ENABLE +/// Overrides functions in `quantum.c` +void backlight_init_ports(void) { + b_led_init_ports(); +} + +void backlight_task(void) { + b_led_task(); +} + +void backlight_set(uint8_t level) { + b_led_set(level); +} +#endif + +#ifdef RGBLIGHT_ENABLE +extern rgblight_config_t rgblight_config; + +// custom RGB driver +void rgblight_set(void) { + if (!rgblight_config.enable) { + for (uint8_t i=0; i<RGBLED_NUM; i++) { + led[i].r = 0; + led[i].g = 0; + led[i].b = 0; + } + } + + i2c_init(); + i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); +} + +bool rgb_init = false; + +void matrix_scan_kb(void) { + // if LEDs were previously on before poweroff, turn them back on + if (rgb_init == false && rgblight_config.enable) { + i2c_init(); + i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); + rgb_init = true; + } + + rgblight_task(); +#else +void matrix_scan_kb(void) { +#endif + matrix_scan_user(); + /* Nothing else for now. */ +} + +__attribute__((weak)) // overridable +void matrix_init_user(void) { + +} + + +__attribute__((weak)) // overridable +void matrix_scan_user(void) { + +} diff --git a/keyboards/jj4x4/jj4x4.h b/keyboards/jj4x4/jj4x4.h new file mode 100644 index 0000000000..03cf5d8a62 --- /dev/null +++ b/keyboards/jj4x4/jj4x4.h @@ -0,0 +1,46 @@ +/* +Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef KEYMAP_COMMON_H +#define KEYMAP_COMMON_H + +#include "quantum.h" +#include "quantum_keycodes.h" +#include "keycode.h" +#include "action.h" + +void matrix_init_user(void); // TODO port this to other PS2AVRGB boards + +#define XXX KC_NO + + +#define LAYOUT( \ + K01, K02, K03, K04, \ + K11, K12, K13, K14, \ + K21, K22, K23, K24, \ + K31, K32, K33, K34 \ +) \ +{ \ + { K01, K02, K03, K04 }, \ + { K11, K12, K13, K14 }, \ + { K21, K22, K23, K24 }, \ + { K31, K32, K33, K34 } \ +} + + + +#endif diff --git a/keyboards/jj4x4/keymaps/default/keymap.c b/keyboards/jj4x4/keymaps/default/keymap.c new file mode 100644 index 0000000000..d4130e8090 --- /dev/null +++ b/keyboards/jj4x4/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +#include QMK_KEYBOARD_H + + +#define _QWERTY 0 + + +enum custom_keycodes { + QWERTY = SAFE_RANGE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty + * ,---------------------------. + * | A | B | C | D | + * +------+------+------+------| + * | E | F | G | H | + * +------+------+------+------| + * | I | J | K | L | + * +------+------+------+------| + * | M | N | O | P | + * ----------------------------' + */ +[_QWERTY] = LAYOUT( \ + KC_A, KC_B, KC_C, KC_D, \ + KC_E, KC_F, KC_G, KC_H, \ + KC_I, KC_J, KC_K, KC_L, \ + KC_M, KC_N, KC_O, KC_P \ +), +}; + +// Loop +void matrix_scan_user(void) { + // Empty +}; diff --git a/keyboards/jj4x4/rules.mk b/keyboards/jj4x4/rules.mk new file mode 100644 index 0000000000..3e222c620d --- /dev/null +++ b/keyboards/jj4x4/rules.mk @@ -0,0 +1,58 @@ +# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# MCU name +MCU = atmega32a +PROTOCOL = VUSB + +# unsupported features for now +NO_UART = yes +NO_SUSPEND_POWER_DOWN = yes + +# processor frequency +F_CPU = 12000000 + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = bootloadHID + +# build options +BOOTMAGIC_ENABLE = no +MOUSEKEY_ENABLE = no +EXTRAKEY_ENABLE = yes +CONSOLE_ENABLE = no +COMMAND_ENABLE = yes + +BACKLIGHT_ENABLE = yes +BACKLIGHT_CUSTOM_DRIVER = yes + +RGBLIGHT_ENABLE = yes +RGBLIGHT_CUSTOM_DRIVER = yes + +KEY_LOCK_ENABLE = yes + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +OPT_DEFS = -DDEBUG_LEVEL=0 + +SRC = i2c.c backlight.c + +# programming options +PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex + + diff --git a/keyboards/jj4x4/tools/README.md b/keyboards/jj4x4/tools/README.md new file mode 100644 index 0000000000..081984ed44 --- /dev/null +++ b/keyboards/jj4x4/tools/README.md @@ -0,0 +1,16 @@ +# JJ40 Tools + +## usb_detach.c + +When trying to flash on Linux, you may encounter a "Resource Unavailable" error. This means that Linux's HID driver has taken exclusive control of the keyboard, and the program script can't flash it. +This program can force Linux to give up a device, so that the programming script can reset it. + +### To compile: +``` +gcc usb_detach.c -o usb_detach +``` + +### To run: +1. Use `lsusb` to discover the Bus and Device numbers for your keyboard. +2. Run the program: `sudo ./usb_detach /dev/bus/usb/<BUS>/<DEVICE>`. +3. Build and program the firmware as normal. diff --git a/keyboards/jj4x4/tools/usb_detach.c b/keyboards/jj4x4/tools/usb_detach.c new file mode 100644 index 0000000000..c21e47a7a4 --- /dev/null +++ b/keyboards/jj4x4/tools/usb_detach.c @@ -0,0 +1,33 @@ +/* Found at https://www.linuxquestions.org/questions/linux-hardware-18/how-to-unclaim-usb-device-558138/#post3406986 */ +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <linux/ioctl.h> +#include <linux/usbdevice_fs.h> + +int main(int argc, char**argv) +{ + struct usbdevfs_ioctl command; + int ret; + int fd; + int i; + if (argc>1) { + fd = open(argv[1],O_RDWR); + if (fd<1){ + perror("unable to open file"); + return 1; + } + for (i=0;i<255;i++){ // hack: should fetch how many interface there is. + command.ifno = i; + command.ioctl_code = USBDEVFS_DISCONNECT; + command.data = NULL; + ret = ioctl(fd, USBDEVFS_IOCTL, &command); + if(ret!=-1) + printf("un claimed interface %d %d\n",i,ret); + } + } else { + printf ("usage: %s /dev/bus/usb/BUS/DEVICE\n",argv[0]); + printf("Release all interfaces of this usb device for usage in virtualisation\n" |