summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--keyboards/duck/orion/v3/config.h10
-rw-r--r--keyboards/duck/orion/v3/keymaps/default/keymap.c22
-rw-r--r--keyboards/duck/orion/v3/matrix.c31
-rw-r--r--keyboards/duck/orion/v3/readme.md14
-rw-r--r--keyboards/duck/orion/v3/v3.c58
-rw-r--r--keyboards/duck/readme.md1
6 files changed, 64 insertions, 72 deletions
diff --git a/keyboards/duck/orion/v3/config.h b/keyboards/duck/orion/v3/config.h
index 3a17d59416..b04729712e 100644
--- a/keyboards/duck/orion/v3/config.h
+++ b/keyboards/duck/orion/v3/config.h
@@ -37,11 +37,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DEBOUNCE 5
/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
+// #define BACKLIGHT_LEVELS 3
+
+#undef BACKLIGHT_PIN
+#define BACKLIGHT_PINS { B1, B2, B3, E6 }
+#define BACKLIGHT_LED_COUNT 4
+#define BACKLIGHT_LEVELS 10
+#define BACKLIGHT_ON_STATE 1
#define RGBLIGHT_ANIMATIONS
#define RGB_DI_PIN D6
-#define RGBLED_NUM 17
+#define RGBLED_NUM 18
/* Set to top left most key */
#define BOOTMAGIC_LITE_ROW 4
diff --git a/keyboards/duck/orion/v3/keymaps/default/keymap.c b/keyboards/duck/orion/v3/keymaps/default/keymap.c
index 83fa4f9a8e..0da0cdaeb3 100644
--- a/keyboards/duck/orion/v3/keymaps/default/keymap.c
+++ b/keyboards/duck/orion/v3/keymaps/default/keymap.c
@@ -16,11 +16,19 @@
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = LAYOUT_tkl_ansi(\
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS ,KC_HOME,KC_PGUP, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL ,KC_END ,KC_PGDN, \
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, \
- KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT) \
+[0] = LAYOUT_tkl_ansi(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS ,KC_HOME,KC_PGUP,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL ,KC_END ,KC_PGDN,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP,
+ KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, MO(1),KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT),
+
+[1] = LAYOUT_tkl_ansi(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ BL_TOGG, BL_STEP, BL_INC, BL_DEC, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
};
diff --git a/keyboards/duck/orion/v3/matrix.c b/keyboards/duck/orion/v3/matrix.c
index 3c3240b9f4..f93c7a9cd9 100644
--- a/keyboards/duck/orion/v3/matrix.c
+++ b/keyboards/duck/orion/v3/matrix.c
@@ -14,13 +14,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <util/delay.h>
-#include <avr/io.h>
-#include <stdio.h>
-#include "matrix.h"
-#include "util.h"
-#include "print.h"
-#include "debug.h"
+#include "quantum.h"
static uint8_t debouncing = DEBOUNCE;
@@ -54,18 +48,23 @@ void matrix_scan_user(void) {
void backlight_init_ports(void)
{
- DDRD |= 0b11010000;
- PORTD &= ~0b01010000;
- PORTD |= 0b10000000;
- DDRB |= 0b00011111;
- PORTB &= ~0b00001110;
- PORTB |= 0b00010001;
- DDRE |= 0b01000000;
- PORTE &= ~0b01000000;
+
+}
+
+void indicator_init_ports(void) {
+
+ // Num LED
+ setPinOutput(B4);
+
+ // Caps Lock
+ setPinOutput(B0);
+
+ // Scroll Lock
+ setPinOutput(D7);
}
void matrix_init(void) {
- backlight_init_ports();
+ indicator_init_ports();
unselect_cols();
init_rows();
diff --git a/keyboards/duck/orion/v3/readme.md b/keyboards/duck/orion/v3/readme.md
index 50032e93ee..8d1b83401e 100644
--- a/keyboards/duck/orion/v3/readme.md
+++ b/keyboards/duck/orion/v3/readme.md
@@ -3,9 +3,9 @@
Non official firmware for custom TKL Korean keyboard made by Duck.
Group buy was run December 2018 via [geekhack](https://geekhack.org/index.php?topic=98581.0) with 100 keyboards total.
-Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
-Hardware Supported: Duck Eagle/Viper PCB Ver 2.0, Atmega32u4
-Hardware Availability: Wait until GB of the next revision
+* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+* Hardware Supported: Duck Orion V3 PCB Ver 2.1
+* Hardware Availability: Wait until GB of the next revision
Make example for this keyboard (after setting up your build environment):
@@ -13,7 +13,7 @@ Make example for this keyboard (after setting up your build environment):
**Reset Key:** To put the Orion V3 into reset, hold Backspace key (`K4N`) while plugging in.
-**CAUTION:** At this time 10/03/19 lighting has not been tested fully and may not properly work.
+**CAUTION:** At this time 12/19/19 layer indicator lighting has not been implemented by default.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
@@ -22,9 +22,9 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
The Orion V3 PCB consists of:
### Microchips
-2 74HC237D 3-to-8 line decoders
+2 74HC237D 3-to-8 line decoders U1, U2
1 Atmega32u4 microcontroller
-2 WS2811 LED controller
+2 WS2811 LED controller U5, U6
## Notes
-Special thanks to Marcus aka Keebology for doing this remotely and mapping the matrix. \ No newline at end of file
+Special thanks to Marcus aka Keebology for doing this remotely and mapping the matrix, indicator LEDs, and backlight LEDs.
diff --git a/keyboards/duck/orion/v3/v3.c b/keyboards/duck/orion/v3/v3.c
index 95da4b45b6..ca5c512cee 100644
--- a/keyboards/duck/orion/v3/v3.c
+++ b/keyboards/duck/orion/v3/v3.c
@@ -16,48 +16,26 @@
#include "v3.h"
#include "indicator_leds.h"
-enum BACKLIGHT_AREAS {
- BACKLIGHT_ALPHAS = 0b00000010,
- BACKLIGHT_MODNUM = 0b00001000
-};
+// Alphas PB1
+// Navigation Cluster: PB2
+// Number Row, Mods: PB3
+// Function Row: PE6
-void backlight_set(uint8_t level) {
- switch(level) {
- case 0:
- PORTB |= BACKLIGHT_ALPHAS;
- PORTB |= BACKLIGHT_MODNUM;
- break;
- case 1:
- PORTB &= ~BACKLIGHT_ALPHAS;
- PORTB |= BACKLIGHT_MODNUM;
- break;
- case 2:
- PORTB |= BACKLIGHT_ALPHAS;
- PORTB &= ~BACKLIGHT_MODNUM;
- break;
- case 3:
- PORTB &= ~BACKLIGHT_ALPHAS;
- PORTB &= ~BACKLIGHT_MODNUM;
- break;
- }
-}
-
-// Port from backlight_update_state
-void led_set_kb(uint8_t usb_led) {
- bool status[8] = {
- IS_HOST_LED_ON(USB_LED_SCROLL_LOCK), /* LED 3 */
- IS_HOST_LED_ON(USB_LED_CAPS_LOCK), /* LED 2 */
- IS_HOST_LED_ON(USB_LED_NUM_LOCK), /* LED 1 */
-
- layer_state & (1<<2), /* LED 6 */
- layer_state & (1<<1), /* LED 5 */
- layer_state & (1<<0) ? 0: 1, /* LED 4 */
-
- layer_state & (1<<5), /* LED 8 */
- layer_state & (1<<4) /* LED 7 */
- };
+// Other than using RGB or LED matrix, QMK cannot turn on specific zones
+// of backlight LEDs. Unfortunately, Duck PCBs do not follow this design
+// and instead use multiple pins connected to each of these zones. QMK is
+// only able to control them ALL with the current default mechanisms.
- indicator_leds_set(status);
+// Locking indicator LEDs
+// The Duck Orion V3 has 3 locking indicator LEDs and are located to the right
+// of the Escape key.
+bool led_update_kb(led_t led_state) {
+ if(led_update_user(led_state)) {
+ writePin(B0, !led_state.caps_lock);
+ writePin(B4, !led_state.num_lock);
+ writePin(D7, !led_state.scroll_lock);
+ }
+ return true;
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
diff --git a/keyboards/duck/readme.md b/keyboards/duck/readme.md
index caf7e156d1..32076da7da 100644
--- a/keyboards/duck/readme.md
+++ b/keyboards/duck/readme.md
@@ -13,4 +13,5 @@ Jetfire V1
Lightsaver V3
Octagon V1
Octagon V2
+Orion V3
Viper V2 \ No newline at end of file
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 05:42:50 +0000