summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--keyboards/gherkin/keymaps/wanleg/config.h61
-rw-r--r--keyboards/gherkin/keymaps/wanleg/keymap.c221
-rw-r--r--keyboards/gherkin/keymaps/wanleg/readme.md12
-rw-r--r--keyboards/gherkin/keymaps/wanleg/rules.mk63
4 files changed, 357 insertions, 0 deletions
diff --git a/keyboards/gherkin/keymaps/wanleg/config.h b/keyboards/gherkin/keymaps/wanleg/config.h
new file mode 100644
index 0000000000..6b69b21501
--- /dev/null
+++ b/keyboards/gherkin/keymaps/wanleg/config.h
@@ -0,0 +1,61 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER 40 Percent Club
+#define PRODUCT Gherkin
+#define DESCRIPTION A 30 key ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 6
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
+#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B5
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+/*tap dance definition */
+#define TAPPING_TERM 200
+
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif
diff --git a/keyboards/gherkin/keymaps/wanleg/keymap.c b/keyboards/gherkin/keymaps/wanleg/keymap.c
new file mode 100644
index 0000000000..b16c15a907
--- /dev/null
+++ b/keyboards/gherkin/keymaps/wanleg/keymap.c
@@ -0,0 +1,221 @@
+/* Copyright 2017 Brian Fong
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "gherkin.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QW 0
+#define DIR 1
+#define NUM 2
+#define ETC 3
+
+
+/////////////// TAP DANCE SECTION START ///////////////
+//Tap Dance Declarations (list of my tap dance configurations)
+enum {
+ TD_SFT_CAPS = 0
+ ,TD_Q_ESC
+ ,ENT_TAP_DANCE
+ ,DEL_TAP_DANCE
+};
+
+///// QUAD FUNCTION TAP DANCE GENERAL SETUP SECTION START /////
+///// (no need to edit this section) /////
+//Enums used to clearly convey the state of the tap dance
+enum {
+ SINGLE_TAP = 1,
+ SINGLE_HOLD = 2,
+ DOUBLE_TAP = 3,
+ DOUBLE_HOLD = 4,
+ DOUBLE_SINGLE_TAP = 5 //send SINGLE_TAP twice - NOT DOUBLE_TAP
+ // Add more enums here if you want for triple, quadruple, etc.
+};
+
+typedef struct {
+ bool is_press_action;
+ int state;
+} tap;
+
+int cur_dance (qk_tap_dance_state_t *state) {
+ if (state->count == 1) {
+ //If count = 1, and it has been interrupted - it doesn't matter if it is pressed or not: Send SINGLE_TAP
+ if (state->interrupted || !state->pressed) return SINGLE_TAP;
+ if (state->interrupted) return SINGLE_TAP;
+ else return SINGLE_HOLD;
+ }
+ //If count = 2, and it has been interrupted - assume that user is trying to type the letter associated
+ //with single tap.
+ else if (state->count == 2) {
+ if (state->interrupted) return DOUBLE_SINGLE_TAP;
+ else if (state->pressed) return DOUBLE_HOLD;
+ else return DOUBLE_TAP;
+ }
+ else return 6; //magic number. At some point this method will expand to work for more presses
+}
+///// QUAD FUNCTION TAP DANCE GENERAL SETUP SECTION END /////
+///// QUAD FUNCTION TAP DANCE PERSONALIZATION SECTION START /////
+//instantialize an instance of 'tap' for the 'ENT' tap dance.
+static tap ENTtap_state = {
+ .is_press_action = true,
+ .state = 0
+};
+
+void ENT_finished (qk_tap_dance_state_t *state, void *user_data) {
+ ENTtap_state.state = cur_dance(state);
+ switch (ENTtap_state.state) {
+ case SINGLE_TAP: register_code(KC_SPC); break;
+ case SINGLE_HOLD: register_code(KC_LSFT); break;
+ case DOUBLE_TAP: register_code(KC_ENT); break;
+ case DOUBLE_HOLD: register_code(KC_NO); break; // setting double hold to do nothing (change this if you want)
+ case DOUBLE_SINGLE_TAP: register_code(KC_SPC); unregister_code(KC_SPC); register_code(KC_SPC);
+ //Last case is for fast typing. Assuming your key is `f`:
+ //For example, when typing the word `buffer`, and you want to make sure that you send `ff` and not `Esc`.
+ //In order to type `ff` when typing fast, the next character will have to be hit within the `TAPPING_TERM`, which by default is 200ms.
+ }
+}
+
+void ENT_reset (qk_tap_dance_state_t *state, void *user_data) {
+ switch (ENTtap_state.state) {
+ case SINGLE_TAP: unregister_code(KC_SPC); break;
+ case SINGLE_HOLD: unregister_code(KC_LSFT); break;
+ case DOUBLE_TAP: unregister_code(KC_ENT); break;
+ case DOUBLE_HOLD: unregister_code(KC_NO);
+ case DOUBLE_SINGLE_TAP: unregister_code(KC_SPC);
+ }
+ ENTtap_state.state = 0;
+}
+
+//instanalize an instance of 'tap' for the 'DEL' tap dance.
+static tap DELtap_state = {
+ .is_press_action = true,
+ .state = 0
+};
+
+void DEL_finished (qk_tap_dance_state_t *state, void *user_data) {
+ DELtap_state.state = cur_dance(state);
+ switch (DELtap_state.state) {
+ case SINGLE_TAP: register_code(KC_BSPC); break;
+ case SINGLE_HOLD: register_code(KC_LCTL); break;
+ case DOUBLE_TAP: register_code(KC_DEL); break;
+ case DOUBLE_HOLD: register_code(KC_NO); break;
+ case DOUBLE_SINGLE_TAP: register_code(KC_BSPC); unregister_code(KC_BSPC); register_code(KC_BSPC);
+ }
+}
+
+void DEL_reset (qk_tap_dance_state_t *state, void *user_data) {
+ switch (DELtap_state.state) {
+ case SINGLE_TAP: unregister_code(KC_BSPC); break;
+ case SINGLE_HOLD: unregister_code(KC_LCTL); break;
+ case DOUBLE_TAP: unregister_code(KC_DEL); break;
+ case DOUBLE_HOLD: unregister_code(KC_NO);
+ case DOUBLE_SINGLE_TAP: unregister_code(KC_BSPC);
+ }
+ DELtap_state.state = 0;
+}
+///// QUAD FUNCTION TAP DANCE PERSONALIZATION SECTION END /////
+
+//Tap Dance Definitions
+//THIS SECTION HAS TO BE AT THE END OF THE TAP DANCE SECTION
+qk_tap_dance_action_t tap_dance_actions[] = {
+ [TD_SFT_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS)
+// Other declarations would go here, separated by commas, if you have them
+ ,[TD_Q_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC)
+ ,[ENT_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, ENT_finished, ENT_reset)
+ ,[DEL_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, DEL_finished, DEL_reset)
+};
+
+//In Layer declaration, add tap dance item in place of a key code
+//TD(TD_SFT_CAPS)
+
+///////////// TAP DANCE SECTION END ///////////////
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* Qwerty
+ * .-----------------------------------------------------------------------------------------.
+ * | Q//ESC | W | E | R | T | Y | U | I | O | P |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | A | S | D | F | G | H | J | K | L | ENTER |
+ * | | | | | | | | | |SFThold |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | Z | X | C | V/NUM | B/ETC | N | M/DIR | ,/GUI | ./ALT | BKSC |
+ * | SFThold| | | | | | | | |CTRLhold|
+ * '-----------------------------------------------------------------------------------------'
+ */
+
+ [_QW] = KEYMAP( /* Qwerty*/
+ TD(TD_Q_ESC), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
+ KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, SFT_T(KC_SPC),
+ SFT_T(KC_Z), KC_X, KC_C, LT(NUM, KC_V), LT(ETC, KC_B), KC_N, LT(DIR, KC_M), GUI_T(KC_COMM), ALT_T(KC_DOT), CTL_T(KC_BSPC)
+ ),
+
+
+//
+///*
+// * Directional Modifiers
+// * .-----------------------------------------------------------------------------------------.
+// * | TAB | up | | INS | CTRL | SHIFT | PgUp | HOME | - | = |
+// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+// * | left | down | right | PrScr | SHIFT | CTRL | PgDn | END | [ | ] |
+// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+// * | | | | | | | | | ALT | / |
+// * '-----------------------------------------------------------------------------------------'
+// */
+//
+[DIR] = KEYMAP( /* Directional Modifiers */
+ KC_TAB, KC_UP, KC_TRNS, KC_INS, KC_LCTL, KC_RSFT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL ,
+ KC_LEFT, KC_DOWN, KC_RGHT, KC_PSCR, KC_LSFT, KC_RCTL, KC_PGDN, KC_END, KC_LBRC, KC_RBRC ,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RALT, KC_SLSH
+),
+//
+// /*
+// * Numbers
+// * .-----------------------------------------------------------------------------------------.
+// * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 |
+// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+// * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
+// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+// * | F11 | F12 | | | | ENTER | SHIFT | GUI | ./ALT | BKSC |
+// * | | | | | | | | | |CTRLhold|
+// * '-----------------------------------------------------------------------------------------'
+// */
+//
+[NUM] = KEYMAP ( /* Numbers */
+ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 ,
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0 ,
+ KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC)
+),
+//
+//
+// /*
+// * ETC
+// * .-----------------------------------------------------------------------------------------.
+// * | ` | | | | | | | | | \ |
+// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+// * | CAPS | P-Brk | | | | | | | ; | ' |
+// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+// * | SHIFT | | | | | C-A-D | | GUI | | DEL |
+// * '-----------------------------------------------------------------------------------------'
+// */
+//
+[ETC] = KEYMAP( /* ETC */
+ KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS ,
+ KC_CAPS, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT ,
+ KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LALT(LCTL(KC_DEL)), KC_TRNS, KC_RGUI, KC_TRNS, KC_DEL
+ ),
+};
diff --git a/keyboards/gherkin/keymaps/wanleg/readme.md b/keyboards/gherkin/keymaps/wanleg/readme.md
new file mode 100644
index 0000000000..a364fcabca
--- /dev/null
+++ b/keyboards/gherkin/keymaps/wanleg/readme.md
@@ -0,0 +1,12 @@
+![Gherkin Wanleg Layout Image](https://i.imgur.com/RpN5N42.png)
+
+# Gherkin Wanleg Layout
+
+Here is the layout I came up with to preserve a standard QWERTY layout as much as possible, in as few layers as possible for a 30 key board.
+I originally set up a few Tap Dance keys, but eventually dropped most of them in favor of chorded versions, since in actual use, they tended to impede typing speed more than their (current) two-key versions.
+I've left them in my layout ready for use if anyone wants to try them out:
+Single tap - Double tap - Hold
+space - enter - shift
+backspace - delete - control
+shift - caps lock - XXXX
+KC_Q - escape - XXXX \ No newline at end of file
diff --git a/keyboards/gherkin/keymaps/wanleg/rules.mk b/keyboards/gherkin/keymaps/wanleg/rules.mk
new file mode 100644
index 0000000000..06e66c16ed
--- /dev/null
+++ b/keyboards/gherkin/keymaps/wanleg/rules.mk
@@ -0,0 +1,63 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
+TAP_DANCE_ENABLE = yes # Enable Tap Dance (comment if not being implemented) \ No newline at end of file