summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/avr/ws2812.c35
-rw-r--r--drivers/avr/ws2812.h4
-rw-r--r--keyboards/ergodox_ez/led_i2c.c13
3 files changed, 17 insertions, 35 deletions
diff --git a/drivers/avr/ws2812.c b/drivers/avr/ws2812.c
index 82d985c20a..5c3d72dcb5 100644
--- a/drivers/avr/ws2812.c
+++ b/drivers/avr/ws2812.c
@@ -20,12 +20,13 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-
#include "ws2812.h"
#include <avr/interrupt.h>
#include <avr/io.h>
#include <util/delay.h>
+#define pinmask(pin) (_BV((pin)&0xF))
+
/*
* Forward declare internal functions
*
@@ -33,20 +34,21 @@
* The length is the number of bytes to send - three per LED.
*/
-void ws2812_sendarray(uint8_t *array, uint16_t length);
-void ws2812_sendarray_mask(uint8_t *array, uint16_t length, uint8_t pinmask);
+static inline void ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t masklo, uint8_t maskhi);
// Setleds for standard RGB
-void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) {
- // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
- ws2812_setleds_pin(ledarray, leds, _BV(RGB_DI_PIN & 0xF));
+void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) {
+ // wrap up usage of RGB_DI_PIN
+ ws2812_setleds_pin(ledarray, number_of_leds, RGB_DI_PIN);
}
-void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask) {
- // new universal format (DDR)
- _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask;
+void ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t number_of_leds, uint8_t pin) {
+ DDRx_ADDRESS(RGB_DI_PIN) |= pinmask(pin);
- ws2812_sendarray_mask((uint8_t *)ledarray, leds * sizeof(LED_TYPE), pinmask);
+ uint8_t masklo = ~(pinmask(pin)) & PORTx_ADDRESS(pin);
+ uint8_t maskhi = pinmask(pin) | PORTx_ADDRESS(pin);
+
+ ws2812_sendarray_mask((uint8_t *)ledarray, number_of_leds * sizeof(LED_TYPE), masklo, maskhi);
#ifdef RGBW
_delay_us(80);
@@ -55,8 +57,6 @@ void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmas
#endif
}
-void ws2812_sendarray(uint8_t *data, uint16_t datlen) { ws2812_sendarray_mask(data, datlen, _BV(RGB_DI_PIN & 0xF)); }
-
/*
This routine writes an array of bytes with RGB values to the Dataout pin
using the fast 800kHz clockless WS2811/2812 protocol.
@@ -118,14 +118,9 @@ void ws2812_sendarray(uint8_t *data, uint16_t datlen) { ws2812_sendarray_mask(da
#define w_nop8 w_nop4 w_nop4
#define w_nop16 w_nop8 w_nop8
-void inline ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t maskhi) {
- uint8_t curbyte, ctr, masklo;
- uint8_t sreg_prev;
+static inline void ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t masklo, uint8_t maskhi) {
+ uint8_t curbyte, ctr, sreg_prev;
- // masklo =~maskhi&ws2812_PORTREG;
- // maskhi |= ws2812_PORTREG;
- masklo = ~maskhi & _SFR_IO8((RGB_DI_PIN >> 4) + 2);
- maskhi |= _SFR_IO8((RGB_DI_PIN >> 4) + 2);
sreg_prev = SREG;
cli();
@@ -188,7 +183,7 @@ void inline ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t maskhi
" dec %0 \n\t" // '1' [+2] '0' [+2]
" brne loop%=\n\t" // '1' [+3] '0' [+4]
: "=&d"(ctr)
- : "r"(curbyte), "I"(_SFR_IO_ADDR(_SFR_IO8((RGB_DI_PIN >> 4) + 2))), "r"(maskhi), "r"(masklo));
+ : "r"(curbyte), "I"(_SFR_IO_ADDR(PORTx_ADDRESS(RGB_DI_PIN))), "r"(maskhi), "r"(masklo));
}
SREG = sreg_prev;
diff --git a/drivers/avr/ws2812.h b/drivers/avr/ws2812.h
index b869fb28c8..88eb081894 100644
--- a/drivers/avr/ws2812.h
+++ b/drivers/avr/ws2812.h
@@ -29,7 +29,7 @@
* Input:
* ledarray: An array of GRB data describing the LED colors
* number_of_leds: The number of LEDs to write
- * pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0)
+ * pin (optional): A pin_t definition for the line to drive
*
* The functions will perform the following actions:
* - Set the data-out pin as output
@@ -37,4 +37,4 @@
* - Wait 50us to reset the LEDs
*/
void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
-void ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t number_of_leds, uint8_t pinmask);
+void ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t number_of_leds, uint8_t pin);
diff --git a/keyboards/ergodox_ez/led_i2c.c b/keyboards/ergodox_ez/led_i2c.c
index 4a7a02f468..7c1ccdec5a 100644
--- a/keyboards/ergodox_ez/led_i2c.c
+++ b/keyboards/ergodox_ez/led_i2c.c
@@ -27,19 +27,6 @@
extern rgblight_config_t rgblight_config;
-/*
- * Forward declare internal functions
- *
- * The functions take a byte-array and send to the data output as WS2812 bitstream.
- * The length is the number of bytes to send - three per LED.
- */
-
-void ws2812_sendarray(uint8_t *array, uint16_t length);
-void ws2812_sendarray_mask(uint8_t *array, uint16_t length, uint8_t pinmask);
-
-
-
-
void rgblight_set(void) {
if (!rgblight_config.enable) {
for (uint8_t i = 0; i < RGBLED_NUM; i++) {