diff options
| -rw-r--r-- | keyboards/handwired/onekey/blackpill_f401/rules.mk | 30 | ||||
| -rw-r--r-- | keyboards/handwired/onekey/blackpill_f411/rules.mk | 30 | ||||
| -rw-r--r-- | keyboards/handwired/riblee_f401/rules.mk | 32 | ||||
| -rw-r--r-- | keyboards/matrix/m20add/rules.mk | 27 | ||||
| -rw-r--r-- | keyboards/matrix/noah/rules.mk | 27 | ||||
| -rw-r--r-- | keyboards/phoenix/rules.mk | 34 | ||||
| -rw-r--r-- | keyboards/tkw/stoutgat/v2/f411/rules.mk | 30 | ||||
| -rw-r--r-- | keyboards/zvecr/zv48/f401/rules.mk | 30 | ||||
| -rw-r--r-- | keyboards/zvecr/zv48/f411/rules.mk | 30 | ||||
| -rw-r--r-- | quantum/mcu_selection.mk | 126 |
10 files changed, 131 insertions, 265 deletions
diff --git a/keyboards/handwired/onekey/blackpill_f401/rules.mk b/keyboards/handwired/onekey/blackpill_f401/rules.mk index 609262049c..6eb37a581d 100644 --- a/keyboards/handwired/onekey/blackpill_f401/rules.mk +++ b/keyboards/handwired/onekey/blackpill_f401/rules.mk @@ -1,30 +1,8 @@ -## chip/board settings -# the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx -# linker script to use -# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F401xC -# startup code to use -# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx -# it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -BOARD = BLACKPILL_STM32_F401 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -USE_FPU = yes -# Address of the booloader in system memory -STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 +# MCU name +MCU = STM32F401 -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p df11 +# Address of the bootloader in system memory +STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 # Build Options # change yes to no to disable diff --git a/keyboards/handwired/onekey/blackpill_f411/rules.mk b/keyboards/handwired/onekey/blackpill_f411/rules.mk index f2e0f2b4f9..7cf886431f 100644 --- a/keyboards/handwired/onekey/blackpill_f411/rules.mk +++ b/keyboards/handwired/onekey/blackpill_f411/rules.mk @@ -1,30 +1,8 @@ -## chip/board settings -# the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx -# linker script to use -# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F411xE -# startup code to use -# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx -# it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -BOARD = BLACKPILL_STM32_F411 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -USE_FPU = yes -# Address of the booloader in system memory -STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 +# MCU name +MCU = STM32F411 -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p df11 +# Address of the bootloader in system memory +STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 # Build Options # change yes to no to disable diff --git a/keyboards/handwired/riblee_f401/rules.mk b/keyboards/handwired/riblee_f401/rules.mk index eab426a375..2cb1d380e1 100644 --- a/keyboards/handwired/riblee_f401/rules.mk +++ b/keyboards/handwired/riblee_f401/rules.mk @@ -1,30 +1,8 @@ -## chip/board settings -# the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx -# linker script to use -# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F401xC -# startup code to use -# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx -# it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -BOARD = BLACKPILL_STM32_F401 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -USE_FPU = yes -# Address of the booloader in system memory -STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 +# MCU name +MCU = STM32F401 -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p df11 +# Address of the bootloader in system memory +STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 # Build Options # change yes to no to disable @@ -43,4 +21,4 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = software RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow BLUETOOTH_ENABLE = no # Enable Bluetooth -AUDIO_ENABLE = no # Audio output
\ No newline at end of file +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/matrix/m20add/rules.mk b/keyboards/matrix/m20add/rules.mk index 6dba153932..fb97c1d3c8 100644 --- a/keyboards/matrix/m20add/rules.mk +++ b/keyboards/matrix/m20add/rules.mk @@ -1,38 +1,15 @@ -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx +# MCU name +MCU = STM32F411 # Linker script to use # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ # or <this_dir>/ld/ MCU_LDSCRIPT = m20add_boot -# Startup code to use -# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx - # Board: it should exist either in <chibios>/os/hal/boards/ # or <this_dir>/boards BOARD = m20add_bd -# Cortex version -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 - -USE_FPU = yes - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -OPT_DEFS = - -# Options to pass to dfu-util when flashing -#DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -#DFU_SUFFIX_ARGS = -p DF11 -v 0483 - # Build Options # comment out to disable the options. # diff --git a/keyboards/matrix/noah/rules.mk b/keyboards/matrix/noah/rules.mk index 094364e11b..19e432d2a0 100644 --- a/keyboards/matrix/noah/rules.mk +++ b/keyboards/matrix/noah/rules.mk @@ -1,38 +1,15 @@ -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx +# MCU name +MCU = STM32F411 # Linker script to use # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ # or <this_dir>/ld/ MCU_LDSCRIPT = noah_boot -# Startup code to use -# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx - # Board: it should exist either in <chibios>/os/hal/boards/ # or <this_dir>/boards BOARD = noah_bd -# Cortex version -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 - -USE_FPU = yes - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -OPT_DEFS = - -# Options to pass to dfu-util when flashing -#DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -#DFU_SUFFIX_ARGS = -p DF11 -v 0483 - # Build Options # comment out to disable the options. # diff --git a/keyboards/phoenix/rules.mk b/keyboards/phoenix/rules.mk index 6c6c8446ab..968c6548c0 100644 --- a/keyboards/phoenix/rules.mk +++ b/keyboards/phoenix/rules.mk @@ -1,3 +1,9 @@ +# MCU name +MCU = STM32F401 + +# Address of the bootloader in system memory +STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 + # Build Options # change yes to no to disable # @@ -17,32 +23,4 @@ SPLIT_KEYBOARD = yes SERIAL_DRIVER = usart KEYBOARD_SHARED_EP = yes -## chip/board settings -# the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx -# linker script to use -# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F401xC -# startup code to use -# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx -# it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -BOARD = BLACKPILL_STM32_F401 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -USE_FPU = yes -# Address of the booloader in system memory -STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p df11 - OPT_DEFS += -DSTM32_DMA_REQUIRED=TRUE diff --git a/keyboards/tkw/stoutgat/v2/f411/rules.mk b/keyboards/tkw/stoutgat/v2/f411/rules.mk index 61add3aed5..4f7f52e62b 100644 --- a/keyboards/tkw/stoutgat/v2/f411/rules.mk +++ b/keyboards/tkw/stoutgat/v2/f411/rules.mk @@ -1,27 +1,5 @@ -## chip/board settings -# the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx -# linker script to use -# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F411xE -# startup code to use -# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx -# it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -BOARD = BLACKPILL_STM32_F411 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -USE_FPU = yes -# Address of the booloader in system memory -STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 +# MCU name +MCU = STM32F411 -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p df11 +# Address of the bootloader in system memory +STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 diff --git a/keyboards/zvecr/zv48/f401/rules.mk b/keyboards/zvecr/zv48/f401/rules.mk index e41d5ef7a2..950442af96 100644 --- a/keyboards/zvecr/zv48/f401/rules.mk +++ b/keyboards/zvecr/zv48/f401/rules.mk @@ -1,27 +1,5 @@ -## chip/board settings -# the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx -# linker script to use -# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F401xC -# startup code to use -# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx -# it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -BOARD = BLACKPILL_STM32_F401 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -USE_FPU = yes -# Address of the booloader in system memory -STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 +# MCU name +MCU = STM32F401 -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p df11 +# Address of the bootloader in system memory +STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 diff --git a/keyboards/zvecr/zv48/f411/rules.mk b/keyboards/zvecr/zv48/f411/rules.mk index 61add3aed5..4f7f52e62b 100644 --- a/keyboards/zvecr/zv48/f411/rules.mk +++ b/keyboards/zvecr/zv48/f411/rules.mk @@ -1,27 +1,5 @@ -## chip/board settings -# the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F4xx -# linker script to use -# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F411xE -# startup code to use -# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f4xx -# it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -BOARD = BLACKPILL_STM32_F411 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -USE_FPU = yes -# Address of the booloader in system memory -STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 +# MCU name +MCU = STM32F411 -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p df11 +# Address of the bootloader in system memory +STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index 33a0cabc84..6ec5dff5f5 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -82,37 +82,37 @@ ifneq ($(findstring MK20DX256, $(MCU)),) BOARD ?= PJRC_TEENSY_3_1 endif -ifneq ($(findstring STM32F303, $(MCU)),) +ifneq ($(findstring STM32F042, $(MCU)),) # Cortex version - MCU = cortex-m4 + MCU = cortex-m0 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 7 + ARMV = 6 ## chip/board settings # - the next two should match the directories in # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 - MCU_SERIES = STM32F3xx + MCU_SERIES = STM32F0xx # Linker script to use # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32F303xC + MCU_LDSCRIPT ?= STM32F042x6 # Startup code to use # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f3xx + MCU_STARTUP ?= stm32f0xx # Board: it should exist either in <chibios>/os/hal/boards/, # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F303XC + BOARD ?= GENERIC_STM32_F042X6 - USE_FPU ?= yes + USE_FPU ?= no # Options to pass to dfu-util when flashing - DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave - DFU_SUFFIX_ARGS ?= -v 0483 -p df11 + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 endif ifneq ($(findstring STM32F072, $(MCU)),) @@ -144,46 +144,46 @@ ifneq ($(findstring STM32F072, $(MCU)),) USE_FPU ?= no # Options to pass to dfu-util when flashing - DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave - DFU_SUFFIX_ARGS ?= -v 0483 -p df11 + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 endif -ifneq ($(findstring STM32F042, $(MCU)),) +ifneq ($(findstring STM32F103, $(MCU)),) # Cortex version - MCU = cortex-m0 + MCU = cortex-m3 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 6 + ARMV = 7 ## chip/board settings # - the next two should match the directories in # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 - MCU_SERIES = STM32F0xx + MCU_SERIES = STM32F1xx # Linker script to use # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32F042x6 + MCU_LDSCRIPT ?= STM32F103x8 # Startup code to use # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f0xx + MCU_STARTUP ?= stm32f1xx # Board: it should exist either in <chibios>/os/hal/boards/, # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F042X6 + BOARD ?= GENERIC_STM32_F103 USE_FPU ?= no # Options to pass to dfu-util when flashing - DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave - DFU_SUFFIX_ARGS ?= -v 0483 -p df11 + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 endif -ifneq ($(findstring STM32F103, $(MCU)),) +ifneq ($(findstring STM32F303, $(MCU)),) # Cortex version - MCU = cortex-m3 + MCU = cortex-m4 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 ARMV = 7 @@ -192,26 +192,92 @@ ifneq ($(findstring STM32F103, $(MCU)),) # - the next two should match the directories in # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 - MCU_SERIES = STM32F1xx + MCU_SERIES = STM32F3xx # Linker script to use # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32F103x8 + MCU_LDSCRIPT ?= STM32F303xC # Startup code to use # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP ?= stm32f1xx + MCU_STARTUP ?= stm32f3xx # Board: it should exist either in <chibios>/os/hal/boards/, # <keyboard_dir>/boards/, or drivers/boards/ - BOARD ?= GENERIC_STM32_F103 + BOARD ?= GENERIC_STM32_F303XC - USE_FPU ?= no + USE_FPU ?= yes + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 +endif + +ifneq ($(findstring STM32F401, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= STM32F401xC + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= BLACKPILL_STM32_F401 + + USE_FPU ?= yes + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 +endif + +ifneq ($(findstring STM32F411, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= STM32F411xE + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= BLACKPILL_STM32_F411 + + USE_FPU ?= yes # Options to pass to dfu-util when flashing - DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave - DFU_SUFFIX_ARGS ?= -v 0483 -p df11 + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 endif ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb1286)) |