2020 May 30 Breaking Changes Update (#9215)

* Branch point for 2020 May 30 Breaking Change

* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)

* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)

* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)

* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)

* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)

* Convert V-USB usbdrv to a submodule (#8321)

* Unify Tap Hold functions and documentation (#8348)

* Changing board names to prevent confusion (#8412)

* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)

* Move spaceman keyboards (#8830)

* Migrate miscellaneous `fn_actions` entries (#8977)

* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)

* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)

* Refactor Lily58 to use split_common (#6260)

* Refactor zinc to use split_common (#7114)

* Add a message if bin/qmk doesn't work (#9000)

* Fix conflicting types for 'tfp_printf' (#8269)

* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)

* Refactor and updates to TKC1800 code (#8472)

* Switch to qmk forks for everything (#9019)

* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)

* Audio enable corrections (2/3) (#8903)

* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)

* Audio enable corrections (Part 4) (#8974)

* Fix typo from PR7114 (#9171)

* Augment future branch Changelogs (#8978)

* Revert "Branch point for 2020 May 30 Breaking Change"

32 files changed, 45 insertions, 7422 deletions

diff --git a/tmk_core/protocol/arm_atsam/led_matrix.c b/tmk_core/protocol/arm_atsam/led_matrix.c
index 24eab25067..4b8cc7c5e1 100644
--- a/tmk_core/protocol/arm_atsam/led_matrix.c
+++ b/tmk_core/protocol/arm_atsam/led_matrix.c
@@ -270,7 +270,7 @@ void flush(void) {
     }
 
     // This should only be performed once per frame
-    pomod = (float)((g_rgb_counters.tick / 10) % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed;
+    pomod = (float)((g_rgb_timer / 10) % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed;
     pomod *= 100.0f;
     pomod = (uint32_t)pomod % 10000;
     pomod /= 100.0f;
diff --git a/tmk_core/protocol/chibios/main.c b/tmk_core/protocol/chibios/main.c
index 61665eb6f4..7d32c16ed8 100644
--- a/tmk_core/protocol/chibios/main.c
+++ b/tmk_core/protocol/chibios/main.c
@@ -158,9 +158,6 @@ int main(void) {
     /* Init USB */
     init_usb_driver(&USB_DRIVER);
 
-    /* init printf */
-    init_printf(NULL, sendchar_pf);
-
 #ifdef MIDI_ENABLE
     setup_midi();
 #endif
diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c
index ecc83d9ecc..65bd291bec 100644
--- a/tmk_core/protocol/chibios/usb_main.c
+++ b/tmk_core/protocol/chibios/usb_main.c
@@ -796,9 +796,8 @@ int8_t sendchar(uint8_t c) {
 }
 #endif /* CONSOLE_ENABLE */
 
-void sendchar_pf(void *p, char c) {
-    (void)p;
-    sendchar((uint8_t)c);
+void _putchar(char character) {
+    sendchar(character);
 }
 
 #ifdef RAW_ENABLE
diff --git a/tmk_core/protocol/chibios/usb_main.h b/tmk_core/protocol/chibios/usb_main.h
index 17041b4f2f..94baf9b35e 100644
--- a/tmk_core/protocol/chibios/usb_main.h
+++ b/tmk_core/protocol/chibios/usb_main.h
@@ -87,6 +87,4 @@ void console_flush_output(void);
 
 #endif /* CONSOLE_ENABLE */
 
-void sendchar_pf(void *p, char c);
-
 #endif /* _USB_MAIN_H_ */
diff --git a/tmk_core/protocol/iwrap.mk b/tmk_core/protocol/iwrap.mk
index eeedd83af2..934235bd81 100644
--- a/tmk_core/protocol/iwrap.mk
+++ b/tmk_core/protocol/iwrap.mk
@@ -16,11 +16,17 @@ VPATH += $(TMK_DIR)/protocol/iwrap
 # V-USB
 #
 VUSB_DIR = protocol/vusb
-OPT_DEFS += -DPROTOCOL_VUSB
-SRC +=	$(VUSB_DIR)/vusb.c \
-	$(VUSB_DIR)/usbdrv/usbdrv.c \
-	$(VUSB_DIR)/usbdrv/usbdrvasm.S \
-	$(VUSB_DIR)/usbdrv/oddebug.c
-VPATH += $(TMK_DIR)/protocol/vusb:$(TMK_DIR)/protocol/vusb/usbdrv
 
+# Path to the V-USB library
+VUSB_PATH = $(LIB_PATH)/vusb
+
+SRC += $(VUSB_DIR)/vusb.c \
+	$(VUSB_PATH)/usbdrv/usbdrv.c \
+	$(VUSB_PATH)/usbdrv/usbdrvasm.S \
+	$(VUSB_PATH)/usbdrv/oddebug.c
 
+# Search Path
+VPATH += $(TMK_PATH)/$(VUSB_DIR)
+VPATH += $(VUSB_PATH)
+
+OPT_DEFS += -DPROTOCOL_VUSB
diff --git a/tmk_core/protocol/iwrap/main.c b/tmk_core/protocol/iwrap/main.c
index 6e9b5455b1..4048a9791d 100644
--- a/tmk_core/protocol/iwrap/main.c
+++ b/tmk_core/protocol/iwrap/main.c
@@ -29,7 +29,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "iwrap.h"
 #ifdef PROTOCOL_VUSB
 #    include "vusb.h"
-#    include "usbdrv.h"
+#    include <usbdrv/usbdrv.h>
 #endif
 #include "uart.h"
 #include "suart.h"
diff --git a/tmk_core/protocol/vusb.mk b/tmk_core/protocol/vusb.mk
index 6df0d0d339..5e564f7480 100644
--- a/tmk_core/protocol/vusb.mk
+++ b/tmk_core/protocol/vusb.mk
@@ -1,13 +1,13 @@
 VUSB_DIR = protocol/vusb
 
-OPT_DEFS += -DPROTOCOL_VUSB
+# Path to the V-USB library
+VUSB_PATH = $(LIB_PATH)/vusb
 
-SRC +=	$(VUSB_DIR)/main.c \
+SRC += $(VUSB_DIR)/main.c \
 	$(VUSB_DIR)/vusb.c \
-	$(VUSB_DIR)/usbdrv/usbdrv.c \
-	$(VUSB_DIR)/usbdrv/usbdrvasm.S \
-	$(VUSB_DIR)/usbdrv/oddebug.c
-
+	$(VUSB_PATH)/usbdrv/usbdrv.c \
+	$(VUSB_PATH)/usbdrv/usbdrvasm.S \
+	$(VUSB_PATH)/usbdrv/oddebug.c
 
 ifneq ($(strip $(CONSOLE_ENABLE)), yes)
 ifndef NO_UART
@@ -18,4 +18,6 @@ endif
 
 # Search Path
 VPATH += $(TMK_PATH)/$(VUSB_DIR)
-VPATH += $(TMK_PATH)/$(VUSB_DIR)/usbdrv
+VPATH += $(VUSB_PATH)
+
+OPT_DEFS += -DPROTOCOL_VUSB
diff --git a/tmk_core/protocol/vusb/main.c b/tmk_core/protocol/vusb/main.c
index 7dc16926d2..b4063273da 100644
--- a/tmk_core/protocol/vusb/main.c
+++ b/tmk_core/protocol/vusb/main.c
@@ -12,8 +12,8 @@
 #include <avr/wdt.h>
 #include <avr/sleep.h>
 #include <util/delay.h>
-#include "usbdrv.h"
-#include "oddebug.h"
+#include <usbdrv/usbdrv.h>
+#include <usbdrv/oddebug.h>
 #include "vusb.h"
 #include "keyboard.h"
 #include "host.h"
diff --git a/tmk_core/protocol/vusb/sendchar_usart.c b/tmk_core/protocol/vusb/sendchar_usart.c
index 42bd9ee363..a920a9a536 100644
--- a/tmk_core/protocol/vusb/sendchar_usart.c
+++ b/tmk_core/protocol/vusb/sendchar_usart.c
@@ -3,7 +3,7 @@
  * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
  */
 #include <stdint.h>
-#include "oddebug.h"
+#include <usbdrv/oddebug.h>
 #include "sendchar.h"
 
 #if DEBUG_LEVEL > 0
diff --git a/tmk_core/protocol/vusb/usbdrv/Changelog.txt b/tmk_core/protocol/vusb/usbdrv/Changelog.txt
deleted file mode 100644
index 1e74180a9e..0000000000
--- a/tmk_core/protocol/vusb/usbdrv/Changelog.txt
+++ /dev/null
@@ -1,308 +0,0 @@
-This file documents changes in the firmware-only USB driver for atmel's AVR
-microcontrollers. New entries are always appended to the end of the file.
-Scroll down to the bottom to see the most recent changes.
-
-2005-04-01:
-  - Implemented endpoint 1 as interrupt-in endpoint.
-  - Moved all configuration options to usbconfig.h which is not part of the
-    driver.
-  - Changed interface for usbVendorSetup().
-  - Fixed compatibility with ATMega8 device.
-  - Various minor optimizations.
-
-2005-04-11:
-  - Changed interface to application: Use usbFunctionSetup(), usbFunctionRead()
-    and usbFunctionWrite() now. Added configuration options to choose which
-    of these functions to compile in.
-  - Assembler module delivers receive data non-inverted now.
-  - Made register and bit names compatible with more AVR devices.
-
-2005-05-03:
-  - Allow address of usbRxBuf on any memory page as long as the buffer does
-    not cross 256 byte page boundaries.
-  - Better device compatibility: works with Mega88 now.
-  - Code optimization in debugging module.
-  - Documentation updates.
-
-2006-01-02:
-  - Added (free) default Vendor- and Product-IDs bought from voti.nl.
-  - Added USBID-License.txt file which defines the rules for using the free
-    shared VID/PID pair.
-  - Added readme.txt to the usbdrv directory which clarifies administrative
-    issues.
-
-2006-01-25:
-  - Added "configured state" to become more standards compliant.
-  - Added "HALT" state for interrupt endpoint.
-  - Driver passes the "USB Command Verifier" test from usb.org now.
-  - Made "serial number" a configuration option.
-  - Minor optimizations, we now recommend compiler option "-Os" for best
-    results.
-  - Added a version number to usbdrv.h
-
-2006-02-03:
-  - New configuration variable USB_BUFFER_SECTION for the memory section where
-    the USB rx buffer will go. This defaults to ".bss" if not defined. Since
-    this buffer MUST NOT cross 256 byte pages (not even touch a page at the
-    end), the user may want to pass a linker option similar to
-    "-Wl,--section-start=.mybuffer=0x800060".
-  - Provide structure for usbRequest_t.
-  - New defines for USB constants.
-  - Prepared for HID implementations.
-  - Increased data size limit for interrupt transfers to 8 bytes.
-  - New macro usbInterruptIsReady() to query interrupt buffer state.
-
-2006-02-18:
-  - Ensure that the data token which is sent as an ack to an OUT transfer is
-    always zero sized. This fixes a bug where the host reports an error after
-    sending an out transfer to the device, although all data arrived at the
-    device.
-  - Updated docs in usbdrv.h to reflect changed API in usbFunctionWrite().
-
-* Release 2006-02-20
-
-  - Give a compiler warning when compiling with debugging turned on.
-  - Added Oleg Semyonov's changes for IAR-cc compatibility.
-  - Added new (optional) functions usbDeviceConnect() and usbDeviceDisconnect()
-    (also thanks to Oleg!).
-  - Rearranged tests in usbPoll() to save a couple of instructions in the most
-    likely case that no actions are pending.
-  - We need a delay between the SET ADDRESS request until the new address
-    becomes active. This delay was handled in usbPoll() until now. Since the
-    spec says that the delay must not exceed 2ms, previous versions required
-    aggressive polling during the enumeration phase. We have now moved the
-    handling of the delay into the interrupt routine.
-  - We must not reply with NAK to a SETUP transaction. We can only achieve this
-    by making sure that the rx buffer is empty when SETUP tokens are expected.
-    We therefore don't pass zero sized data packets from the status phase of
-    a transfer to usbPoll(). This change MAY cause troubles if you rely on
-    receiving a less than 8 bytes long packet in usbFunctionWrite() to
-    identify the end of a transfer. usbFunctionWrite() will NEVER be called
-    with a zero length.
-
-* Release 2006-03-14
-
-  - Improved IAR C support: tiny memory model, more devices
-  - Added template usbconfig.h file under the name usbconfig-prototype.h
-
-* Release 2006-03-26
-
-  - Added provision for one more interrupt-in endpoint (endpoint 3).
-  - Added provision for one interrupt-out endpoint (endpoint 1).
-  - Added flowcontrol macros for USB.
-  - Added provision for custom configuration descriptor.
-  - Allow ANY two port bits for D+ and D-.
-  - Merged (optional) receive endpoint number into global usbRxToken variable.
-  - Use USB_CFG_IOPORTNAME instead of USB_CFG_IOPORT. We now construct the
-    variable name from the single port letter instead of computing the address
-    of related ports from the output-port address.
-
-* Release 2006-06-26
-
-  - Updated documentation in usbdrv.h and usbconfig-prototype.h to reflect the
-    new features.
-  - Removed "#warning" directives because IAR does not understand them. Use
-    unused static variables instead to generate a warning.
-  - Do not include <avr/io.h> when compiling with IAR.
-  - Introduced USB_CFG_DESCR_PROPS_* in usbconfig.h to configure how each
-    USB descriptor should be handled. It is now possible to provide descriptor
-    data in Flash, RAM or dynamically at runtime.
-  - STALL is now a status in usbTxLen* instead of a message. We can now conform
-    to the spec and leave the stall status pending until it is cleared.
-  - Made usbTxPacketCnt1 and usbTxPacketCnt3 public. This allows the
-    application code to reset data toggling on interrupt pipes.
-
-* Release 2006-07-18
-
-  - Added an #if !defined __ASSEMBLER__ to the warning in usbdrv.h. This fixes
-    an assembler error.
-  - usbDeviceDisconnect() takes pull-up resistor to high impedance now.
-
-* Release 2007-02-01
-
-  - Merged in some code size improvements from usbtiny (thanks to Dick
-    Streefland for these optimizations!)
-  - Special alignment requirement for usbRxBuf not required any more. Thanks
-    again to Dick Streefland for this hint!
-  - Reverted to "#warning" instead of unused static variables -- new versions
-    of IAR CC should handle this directive.
-  - Changed Open Source license to GNU GPL v2 in order to make linking against
-    other free libraries easier. We no longer require publication of the
-    circuit diagrams, but we STRONGLY encourage it. If you improve the driver
-    itself, PLEASE grant us a royalty free license to your changes for our
-    commercial license.
-
-* Release 2007-03-29
-
-  - New configuration option "USB_PUBLIC" in usbconfig.h.
-  - Set USB version number to 1.10 instead of 1.01.
-  - Code used USB_CFG_DESCR_PROPS_STRING_DEVICE and
-    USB_CFG_DESCR_PROPS_STRING_PRODUCT inconsistently. Changed all occurrences
-    to USB_CFG_DESCR_PROPS_STRING_PRODUCT.
-  - New assembler module for 16.5 MHz RC oscillator clock with PLL in receiver
-    code.
-  - New assembler module for 16 MHz crystal.
-  - usbdrvasm.S contains common code only, clock-specific parts have been moved
-    to usbdrvasm12.S, usbdrvasm16.S and usbdrvasm165.S respectively.
-
-* Release 2007-06-25
-
-  - 16 MHz module: Do SE0 check in stuffed bits as well.
-
-* Release 2007-07-07
-
-  - Define hi8(x) for IAR compiler to limit result to 8 bits. This is necessary
-    for negative values.
-  - Added 15 MHz module contributed by V. Bosch.
-  - Interrupt vector name can now be configured. This is useful if somebody
-    wants to use a different hardware interrupt than INT0.
-
-* Release 2007-08-07
-
-  - Moved handleIn3 routine in usbdrvasm16.S so that relative jump range is
-    not exceeded.
-  - More config options: USB_RX_USER_HOOK(), USB_INITIAL_DATATOKEN,
-    USB_COUNT_SOF
-  - USB_INTR_PENDING can now be a memory address, not just I/O
-
-* Release 2007-09-19
-
-  - Split out common parts of assembler modules into separate include file
-  - Made endpoint numbers configurable so that given interface definitions
-    can be matched. See USB_CFG_EP3_NUMBER in usbconfig-prototype.h.
-  - Store endpoint number for interrupt/bulk-out so that usbFunctionWriteOut()
-    can handle any number of endpoints.
-  - Define usbDeviceConnect() and usbDeviceDisconnect() even if no
-    USB_CFG_PULLUP_IOPORTNAME is defined. Directly set D+ and D- to 0 in this
-    case.
-
-* Release 2007-12-01
-
-  - Optimize usbDeviceConnect() and usbDeviceDisconnect() for less code size
-    when USB_CFG_PULLUP_IOPORTNAME is not defined.
-
-* Release 2007-12-13
-
-  - Renamed all include-only assembler modules from *.S to *.inc so that
-    people don't add them to their project sources.
-  - Distribute leap bits in tx loop more evenly for 16 MHz module.
-  - Use "macro" and "endm" instead of ".macro" and ".endm" for IAR
-  - Avoid compiler warnings for constant expr range by casting some values in
-    USB descriptors.
-
-* Release 2008-01-21
-
-  - Fixed bug in 15 and 16 MHz module where the new address set with
-    SET_ADDRESS was already accepted at the next NAK or ACK we send, not at
-    the next data packet we send. This caused problems when the host polled
-    too fast. Thanks to Alexander Neumann for his help and patience debugging
-    this issue!
-
-* Release 2008-02-05
-
-  - Fixed bug in 16.5 MHz module where a register was used in the interrupt
-    handler before it was pushed. This bug was introduced with version
-    2007-09-19 when common parts were moved to a separate file.
-  - Optimized CRC routine (thanks to Reimar Doeffinger).
-
-* Release 2008-02-16
-
-  - Removed outdated IAR compatibility stuff (code sections).
-  - Added hook macros for USB_RESET_HOOK() and USB_SET_ADDRESS_HOOK().
-  - Added optional routine usbMeasureFrameLength() for calibration of the
-    internal RC oscillator.
-
-* Release 2008-02-28
-
-  - USB_INITIAL_DATATOKEN defaults to USBPID_DATA1 now, which means that we
-    start with sending USBPID_DATA0.
-  - Changed defaults in usbconfig-prototype.h
-  - Added free USB VID/PID pair for MIDI class devices
-  - Restructured AVR-USB as separate package, not part of PowerSwitch any more.
-
-* Release 2008-04-18
-
-  - Restructured usbdrv.c so that it is easier to read and understand.
-  - Better code optimization with gcc 4.
-  - If a second interrupt in endpoint is enabled, also add it to config
-    descriptor.
-  - Added config option for long transfers (above 254 bytes), see
-    USB_CFG_LONG_TRANSFERS in usbconfig.h.
-  - Added 20 MHz module contributed by Jeroen Benschop.
-
-* Release 2008-05-13
-
-  - Fixed bug in libs-host/hiddata.c function usbhidGetReport(): length
-    was not incremented, pointer to length was incremented instead.
-  - Added code to command line tool(s) which claims an interface. This code
-    is disabled by default, but may be necessary on newer Linux kernels.
-  - Added usbconfig.h option "USB_CFG_CHECK_DATA_TOGGLING".
-  - New header "usbportability.h" prepares ports to other development
-    environments.
-  - Long transfers (above 254 bytes) did not work when usbFunctionRead() was
-    used to supply the data. Fixed this bug. [Thanks to Alexander Neumann!]
-  - In hiddata.c (example code for sending/receiving data over HID), use
-    USB_RECIP_DEVICE instead of USB_RECIP_INTERFACE for control transfers so
-    that we need not claim the interface.
-  - in usbPoll() loop 20 times polling for RESET state instead of 10 times.
-    This accounts for the higher clock rates we now support.
-  - Added a module for 12.8 MHz RC oscillator with PLL in receiver loop.
-  - Added hook to SOF code so that oscillator can be tuned to USB frame clock.
-  - Added timeout to waitForJ loop. Helps preventing unexpected hangs.
-  - Added example code for oscillator tuning to libs-device (thanks to
-    Henrik Haftmann for the idea to this routine).
-  - Implemented option USB_CFG_SUPPRESS_INTR_CODE.
-
-* Release 2008-10-22
-
-  - Fixed libs-device/osctune.h: OSCCAL is memory address on ATMega88 and
-    similar, not offset of 0x20 needs to be added.
-  - Allow distribution under GPLv3 for those who have to link against other
-    code distributed under GPLv3.
-
-* Release 2008-11-26
-
-  - Removed libusb-win32 dependency for hid-data example in Makefile.windows.
-    It was never required and confused many people.
-  - Added extern uchar usbRxToken to usbdrv.h.
-  - Integrated a module with CRC checks at 18 MHz by Lukas Schrittwieser.
-
-* Release 2009-03-23
-
-  - Hid-mouse example used settings from hid-data example, fixed that.
-  - Renamed project to V-USB due to a trademark issue with Atmel(r).
-  - Changed CommercialLicense.txt and USBID-License.txt to make the
-    background of USB ID registration clearer.
-
-* Release 2009-04-15
-
-  - Changed CommercialLicense.txt to reflect the new range of PIDs from
-    Jason Kotzin.
-  - Removed USBID-License.txt in favor of USB-IDs-for-free.txt and
-    USB-ID-FAQ.txt
-  - Fixed a bug in the 12.8 MHz module: End Of Packet decection was made in
-    the center between bit 0 and 1 of each byte. This is where the data lines
-    are expected to change and the sampled data may therefore be nonsense.
-    We therefore check EOP ONLY if bits 0 AND 1 have both been read as 0 on D-.
-  - Fixed a bitstuffing problem in the 16 MHz module: If bit 6 was stuffed,
-    the unstuffing code in the receiver routine was 1 cycle too long. If
-    multiple bytes had the unstuffing in bit 6, the error summed up until the
-    receiver was out of sync.
-  - Included option for faster CRC routine.
-    Thanks to Slawomir Fras (BoskiDialer) for this code!
-  - Updated bits in Configuration Descriptor's bmAttributes according to
-    USB 1.1 (in particular bit 7, it is a must-be-set bit now).
-
-* Release 2009-08-22
-
-  - Moved first DBG1() after odDebugInit() in all examples.
-  - Use vector INT0_vect instead of SIG_INTERRUPT0 if defined. This makes
-    V-USB compatible with the new "p" suffix devices (e.g. ATMega328p).
-  - USB_CFG_CLOCK_KHZ setting is now required in usbconfig.h (no default any
-    more).
-  - New option USB_CFG_DRIVER_FLASH_PAGE allows boot loaders on devices with
-    more than 64 kB flash.
-  - Built-in configuration descriptor allows custom definition for second
-    endpoint now.
-
-* Release 2010-07-15
diff --git a/tmk_core/protocol/vusb/usbdrv/CommercialLicense.txt b/tmk_core/protocol/vusb/usbdrv/CommercialLicense.txt
deleted file mode 100644
index 11d07d9df0..0000000000
--- a/tmk_core/protocol/vusb/usbdrv/CommercialLicense.txt
+++ /dev/null
@@ -1,166 +0,0 @@
-V-USB Driver Software License Agreement
-Version 2009-08-03
-
-THIS LICENSE AGREEMENT GRANTS YOU CERTAIN RIGHTS IN A SOFTWARE. YOU CAN
-ENTER INTO THIS AGREEMENT AND ACQUIRE THE RIGHTS OUTLINED BELOW BY PAYING
-THE AMOUNT ACCORDING TO SECTION 4 ("PAYMENT") TO OBJECTIVE DEVELOPMENT.
-
-
-1 DEFINITIONS
-
-1.1 "OBJECTIVE DEVELOPMENT" shall mean OBJECTIVE DEVELOPMENT Software GmbH,
-Grosse Schiffgasse 1A/7, 1020 Wien, AUSTRIA.
-
-1.2 "You" shall mean the Licensee.
-
-1.3 "V-USB" shall mean all files included in the package distributed under
-the name "vusb" by OBJECTIVE DEVELOPMENT (http://www.obdev.at/vusb/)
-unless otherwise noted. This includes the firmware-only USB device
-implementation for Atmel AVR microcontrollers, some simple device examples
-and host side software examples and libraries.
-
-
-2 LICENSE GRANTS
-
-2.1 Source Code. OBJECTIVE DEVELOPMENT shall furnish you with the source
-code of V-USB.
-
-2.2 Distribution and Use. OBJECTIVE DEVELOPMENT grants you the
-non-exclusive right to use, copy and distribute V-USB with your hardware
-product(s), restricted by the limitations in section 3 below.
-
-2.3 Modifications. OBJECTIVE DEVELOPMENT grants you the right to modify
-the source code and your copy of V-USB according to your needs.
-
-2.4 USB IDs. OBJECTIVE DEVELOPMENT furnishes you with one or two USB
-Product ID(s), sent to you in e-mail. These Product IDs are reserved
-exclusively for you. OBJECTIVE DEVELOPMENT has obtained USB Product ID
-ranges under the Vendor ID 5824 from Wouter van Ooijen (Van Ooijen
-Technische Informatica, www.voti.nl) and under the Vendor ID 8352 from
-Jason Kotzin (Clay Logic, www.claylogic.com). Both owners of the Vendor IDs
-have obtained these IDs from the USB Implementers Forum, Inc.
-(www.usb.org). OBJECTIVE DEVELOPMENT disclaims all liability which might
-arise from the assignment of USB IDs.
-
-2.5 USB Certification. Although not part of this agreement, we want to make
-it clear that you cannot become USB certified when you use V-USB or a USB
-Product ID assigned by OBJECTIVE DEVELOPMENT. AVR microcontrollers don't
-meet the electrical specifications required by the USB specification and
-the USB Implementers Forum certifies only members who bought a Vendor ID of
-their own.
-
-
-3 LICENSE RESTRICTIONS
-
-3.1 Number of Units. Only one of the following three definitions is
-applicable. Which one is determined by the amount you pay to OBJECTIVE
-DEVELOPMENT, see section 4 ("Payment") below.
-
-Hobby License: You may use V-USB according to section 2 above in no more
-than 5 hardware units. These units must not be sold for profit.
-
-Entry Level License: You may use V-USB according to section 2 above in no
-more than 150 hardware units.
-
-Professional License: You may use V-USB according to section 2 above in
-any number of hardware units, except for large scale production ("unlimited
-fair use"). Quantities below 10,000 units are not considered large scale
-production. If your reach quantities which are obviously large scale
-production, you must pay a license fee of 0.10 EUR per unit for all units
-above 10,000.
-
-3.2 Rental. You may not rent, lease, or lend V-USB or otherwise encumber
-any copy of V-USB, or any of the rights granted herein.
-
-3.3 Transfer. You may not transfer your rights under this Agreement to
-another party without OBJECTIVE DEVELOPMENT's prior written consent. If
-such consent is obtained, you may permanently transfer this License to
-another party. The recipient of such transfer must agree to all terms and
-conditions of this Agreement.
-
-3.4 Reservation of Rights. OBJECTIVE DEVELOPMENT retains all rights not
-expressly granted.
-
-3.5 Non-Exclusive Rights. Your license rights under this Agreement are
-non-exclusive.
-
-3.6 Third Party Rights. This Agreement cannot grant you rights controlled
-by third parties. In particular, you are not allowed to use the USB logo or
-other trademarks owned by the USB Implementers Forum, Inc. without their
-consent. Since such consent depends on USB certification, it should be
-noted that V-USB will not pass certification because it does not
-implement checksum verification and the microcontroller ports do not meet
-the electrical specifications.
-
-
-4 PAYMENT
-
-The payment amount depends on the variation of this agreement (according to
-section 3.1) into which you want to enter. Concrete prices are listed on
-OBJECTIVE DEVELOPMENT's web site, usually at
-http://www.obdev.at/vusb/license.html. You agree to pay the amount listed
-there to OBJECTIVE DEVELOPMENT or OBJECTIVE DEVELOPMENT's payment processor
-or reseller.
-
-
-5 COPYRIGHT AND OWNERSHIP
-
-V-USB is protected by copyright laws and international copyright
-treaties, as well as other intellectual property laws and treaties. V-USB
-is licensed, not sold.
-
-
-6 TERM AND TERMINATION
-
-6.1 Term. This Agreement shall continue indefinitely. However, OBJECTIVE
-DEVELOPMENT may terminate this Agreement and revoke the granted license and
-USB-IDs if you fail to comply with any of its terms and conditions.
-
-6.2 Survival of Terms. All provisions regarding secrecy, confidentiality
-and limitation of liability shall survive termination of this agreement.
-
-
-7 DISCLAIMER OF WARRANTY AND LIABILITY
-
-LIMITED WARRANTY. V-USB IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
-KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, OBJECTIVE
-DEVELOPMENT AND ITS SUPPLIERS HEREBY DISCLAIM ALL WARRANTIES, EITHER
-EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND
-NON-INFRINGEMENT, WITH REGARD TO V-USB, AND THE PROVISION OF OR FAILURE
-TO PROVIDE SUPPORT SERVICES. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL
-RIGHTS. YOU MAY HAVE OTHERS, WHICH VARY FROM STATE/JURISDICTION TO
-STATE/JURISDICTION.
-
-LIMITATION OF LIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
-IN NO EVENT SHALL OBJECTIVE DEVELOPMENT OR ITS SUPPLIERS BE LIABLE FOR ANY
-SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER
-(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
-BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY
-LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE V-USB OR THE
-PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES, EVEN IF OBJECTIVE
-DEVELOPMENT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY
-CASE, OBJECTIVE DEVELOPMENT'S ENTIRE LIABILITY UNDER ANY PROVISION OF THIS
-AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR V-USB.
-
-
-8 MISCELLANEOUS TERMS
-
-8.1 Marketing. OBJECTIVE DEVELOPMENT has the right to mention for marketing
-purposes that you entered into this agreement.
-
-8.2 Entire Agreement. This document represents the entire agreement between
-OBJECTIVE DEVELOPMENT and you. It may only be modified in writing signed by
-an authorized representative of both, OBJECTIVE DEVELOPMENT and you.
-
-8.3 Severability. In case a provision of these terms and conditions should
-be or become partly or entirely invalid, ineffective, or not executable,
-the validity of all other provisions shall not be affected.
-
-8.4 Applicable Law. This agreement is governed by the laws of the Republic
-of Austria.
-
-8.5 Responsible Courts. The responsible courts in Vienna/Austria will have
-exclusive jurisdiction regarding all disputes in connection with this
-agreement.
-
diff --git a/tmk_core/protocol/vusb/usbdrv/License.txt b/tmk_core/protocol/vusb/usbdrv/License.txt
deleted file mode 100644
index ce4c3aed45..0000000000
--- a/tmk_core/protocol/vusb/usbdrv/License.txt
+++ /dev/null
@@ -1,361 +0,0 @@
-OBJECTIVE DEVELOPMENT GmbH's V-USB driver software is distributed under the
-terms and conditions of the GNU GPL version 2 or the GNU GPL version 3. It is
-your choice whether you apply the terms of version 2 or version 3. The full
-text of GPLv2 is included below. In addition to the requirements in the GPL,
-we STRONGLY ENCOURAGE you to do the following:
-
-(1) Publish your entire project on a web site and drop us a note with the URL.
-Use the form at http://www.obdev.at/vusb/feedback.html for your submission.
-
-(2) Adhere to minimum publication standards. Please include AT LEAST: