clang-format changes

9 files changed, 937 insertions, 1000 deletions

diff --git a/tmk_core/protocol/vusb/main.c b/tmk_core/protocol/vusb/main.c
index 86c2188c87..f8322d94ac 100644
--- a/tmk_core/protocol/vusb/main.c
+++ b/tmk_core/protocol/vusb/main.c
@@ -21,19 +21,16 @@
 #include "uart.h"
 #include "debug.h"
 
-
 #define UART_BAUD_RATE 115200
 
-
 /* This is from main.c of USBaspLoader */
-static void initForUsbConnectivity(void)
-{
+static void initForUsbConnectivity(void) {
     uint8_t i = 0;
 
     usbInit();
     /* enforce USB re-enumerate: */
-    usbDeviceDisconnect();  /* do this while interrupts are disabled */
-    while(--i){         /* fake USB disconnect for > 250 ms */
+    usbDeviceDisconnect(); /* do this while interrupts are disabled */
+    while (--i) {          /* fake USB disconnect for > 250 ms */
         wdt_reset();
         _delay_ms(1);
     }
@@ -41,8 +38,7 @@ static void initForUsbConnectivity(void)
     sei();
 }
 
-int main(void)
-{
+int main(void) {
     bool suspended = false;
 #if USB_COUNT_SOF
     uint16_t last_timer = timer_read();
@@ -68,26 +64,26 @@ int main(void)
     while (1) {
 #if USB_COUNT_SOF
         if (usbSofCount != 0) {
-            suspended = false;
+            suspended   = false;
             usbSofCount = 0;
-            last_timer = timer_read();
+            last_timer  = timer_read();
         } else {
             // Suspend when no SOF in 3ms-10ms(7.1.7.4 Suspending of USB1.1)
             if (timer_elapsed(last_timer) > 5) {
                 suspended = true;
-/*
-                uart_putchar('S');
-                _delay_ms(1);
-                cli();
-                set_sleep_mode(SLEEP_MODE_PWR_DOWN);
-                sleep_enable();
-                sleep_bod_disable();
-                sei();
-                sleep_cpu();
-                sleep_disable();
-                _delay_ms(10);
-                uart_putchar('W');
-*/
+                /*
+                                uart_putchar('S');
+                                _delay_ms(1);
+                                cli();
+                                set_sleep_mode(SLEEP_MODE_PWR_DOWN);
+                                sleep_enable();
+                                sleep_bod_disable();
+                                sei();
+                                sleep_cpu();
+                                sleep_disable();
+                                _delay_ms(10);
+                                uart_putchar('W');
+                */
             }
         }
 #endif
diff --git a/tmk_core/protocol/vusb/sendchar_usart.c b/tmk_core/protocol/vusb/sendchar_usart.c
index 8d24f87d1e..42bd9ee363 100644
--- a/tmk_core/protocol/vusb/sendchar_usart.c
+++ b/tmk_core/protocol/vusb/sendchar_usart.c
@@ -6,18 +6,14 @@
 #include "oddebug.h"
 #include "sendchar.h"
 
-
 #if DEBUG_LEVEL > 0
 /* from oddebug.c */
-int8_t sendchar(uint8_t c)
-{
-    while(!(ODDBG_USR & (1 << ODDBG_UDRE)));    /* wait for data register empty */
+int8_t sendchar(uint8_t c) {
+    while (!(ODDBG_USR & (1 << ODDBG_UDRE)))
+        ; /* wait for data register empty */
     ODDBG_UDR = c;
     return 1;
 }
 #else
-int8_t sendchar(uint8_t c)
-{
-    return 1;
-}
+int8_t sendchar(uint8_t c) { return 1; }
 #endif
diff --git a/tmk_core/protocol/vusb/usbdrv/oddebug.c b/tmk_core/protocol/vusb/usbdrv/oddebug.c
index 945457c1f4..bcd28ff014 100644
--- a/tmk_core/protocol/vusb/usbdrv/oddebug.c
+++ b/tmk_core/protocol/vusb/usbdrv/oddebug.c
@@ -12,34 +12,30 @@
 
 #if DEBUG_LEVEL > 0
 
-#warning "Never compile production devices with debugging enabled"
+#    warning "Never compile production devices with debugging enabled"
 
-static void uartPutc(char c)
-{
-    while(!(ODDBG_USR & (1 << ODDBG_UDRE)));    /* wait for data register empty */
+static void uartPutc(char c) {
+    while (!(ODDBG_USR & (1 << ODDBG_UDRE)))
+        ; /* wait for data register empty */
     ODDBG_UDR = c;
 }
 
-static uchar    hexAscii(uchar h)
-{
+static uchar hexAscii(uchar h) {
     h &= 0xf;
-    if(h >= 10)
-        h += 'a' - (uchar)10 - '0';
+    if (h >= 10) h += 'a' - (uchar)10 - '0';
     h += '0';
     return h;
 }
 
-static void printHex(uchar c)
-{
+static void printHex(uchar c) {
     uartPutc(hexAscii(c >> 4));
     uartPutc(hexAscii(c));
 }
 
-void    odDebug(uchar prefix, uchar *data, uchar len)
-{
+void odDebug(uchar prefix, uchar *data, uchar len) {
     printHex(prefix);
     uartPutc(':');
-    while(len--){
+    while (len--) {
         uartPutc(' ');
         printHex(*data++);
     }
diff --git a/tmk_core/protocol/vusb/usbdrv/oddebug.h b/tmk_core/protocol/vusb/usbdrv/oddebug.h
index d61309daac..f93f338794 100644
--- a/tmk_core/protocol/vusb/usbdrv/oddebug.h
+++ b/tmk_core/protocol/vusb/usbdrv/oddebug.h
@@ -23,39 +23,38 @@ A debug log consists of a label ('prefix') to indicate which debug log created
 the output and a memory block to dump in hex ('data' and 'len').
 */
 
-
 #ifndef F_CPU
-#   define  F_CPU   12000000    /* 12 MHz */
+#    define F_CPU 12000000 /* 12 MHz */
 #endif
 
 /* make sure we have the UART defines: */
 #include "usbportability.h"
 
 #ifndef uchar
-#   define  uchar   unsigned char
+#    define uchar unsigned char
 #endif
 
 #if DEBUG_LEVEL > 0 && !(defined TXEN || defined TXEN0) /* no UART in device */
-#   warning "Debugging disabled because device has no UART"
-#   undef   DEBUG_LEVEL
+#    warning "Debugging disabled because device has no UART"
+#    undef DEBUG_LEVEL
 #endif
 
 #ifndef DEBUG_LEVEL
-#   define  DEBUG_LEVEL 0
+#    define DEBUG_LEVEL 0
 #endif
 
 /* ------------------------------------------------------------------------- */
 
 #if DEBUG_LEVEL > 0
-#   define  DBG1(prefix, data, len) odDebug(prefix, data, len)
+#    define DBG1(prefix, data, len) odDebug(prefix, data, len)
 #else
-#   define  DBG1(prefix, data, len)
+#    define DBG1(prefix, data, len)
 #endif
 
 #if DEBUG_LEVEL > 1
-#   define  DBG2(prefix, data, len) odDebug(prefix, data, len)
+#    define DBG2(prefix, data, len) odDebug(prefix, data, len)
 #else
-#   define  DBG2(prefix, data, len)
+#    define DBG2(prefix, data, len)
 #endif
 
 /* ------------------------------------------------------------------------- */
@@ -65,57 +64,56 @@ extern void odDebug(uchar prefix, uchar *data, uchar len);
 
 /* Try to find our control registers; ATMEL likes to rename these */
 
-#if defined UBRR
-#   define  ODDBG_UBRR  UBRR
-#elif defined UBRRL
-#   define  ODDBG_UBRR  UBRRL
-#elif defined UBRR0
-#   define  ODDBG_UBRR  UBRR0
-#elif defined UBRR0L
-#   define  ODDBG_UBRR  UBRR0L
-#endif
-
-#if defined UCR
-#   define  ODDBG_UCR   UCR
-#elif defined UCSRB
-#   define  ODDBG_UCR   UCSRB
-#elif defined UCSR0B
-#   define  ODDBG_UCR   UCSR0B
-#endif
-
-#if defined TXEN
-#   define  ODDBG_TXEN  TXEN
-#else
-#   define  ODDBG_TXEN  TXEN0
-#endif
-
-#if defined USR
-#   define  ODDBG_USR   USR
-#elif defined UCSRA
-#   define  ODDBG_USR   UCSRA
-#elif defined UCSR0A
-#   define  ODDBG_USR   UCSR0A
-#endif
-
-#if defined UDRE
-#   define  ODDBG_UDRE  UDRE
-#else
-#   define  ODDBG_UDRE  UDRE0
-#endif
-
-#if defined UDR
-#   define  ODDBG_UDR   UDR
-#elif defined UDR0
-#   define  ODDBG_UDR   UDR0
-#endif
-
-static inline void  odDebugInit(void)
-{
-    ODDBG_UCR |= (1<<ODDBG_TXEN);
+#    if defined UBRR
+#        define ODDBG_UBRR UBRR
+#    elif defined UBRRL
+#        define ODDBG_UBRR UBRRL
+#    elif defined UBRR0
+#        define ODDBG_UBRR UBRR0
+#    elif defined UBRR0L
+#        define ODDBG_UBRR UBRR0L
+#    endif
+
+#    if defined UCR
+#        define ODDBG_UCR UCR
+#    elif defined UCSRB
+#        define ODDBG_UCR UCSRB
+#    elif defined UCSR0B
+#        define ODDBG_UCR UCSR0B
+#    endif
+
+#    if defined TXEN
+#        define ODDBG_TXEN TXEN
+#    else
+#        define ODDBG_TXEN TXEN0
+#    endif
+
+#    if defined USR
+#        define ODDBG_USR USR
+#    elif defined UCSRA
+#        define ODDBG_USR UCSRA
+#    elif defined UCSR0A
+#        define ODDBG_USR UCSR0A
+#    endif
+
+#    if defined UDRE
+#        define ODDBG_UDRE UDRE
+#    else
+#        define ODDBG_UDRE UDRE0
+#    endif
+
+#    if defined UDR
+#        define ODDBG_UDR UDR
+#    elif defined UDR0
+#        define ODDBG_UDR UDR0
+#    endif
+
+static inline void odDebugInit(void) {
+    ODDBG_UCR |= (1 << ODDBG_TXEN);
     ODDBG_UBRR = F_CPU / (19200 * 16L) - 1;
 }
 #else
-#   define odDebugInit()
+#    define odDebugInit()
 #endif
 
 /* ------------------------------------------------------------------------- */
diff --git a/tmk_core/protocol/vusb/usbdrv/usbconfig-prototype.h b/tmk_core/protocol/vusb/usbdrv/usbconfig-prototype.h
index 847710e2a0..020ea51474 100644
--- a/tmk_core/protocol/vusb/usbdrv/usbconfig-prototype.h
+++ b/tmk_core/protocol/vusb/usbdrv/usbconfig-prototype.h
@@ -26,15 +26,15 @@ section at the end of this file).
 
 /* ---------------------------- Hardware Config ---------------------------- */
 
-#define USB_CFG_IOPORTNAME      D
+#define USB_CFG_IOPORTNAME D
 /* This is the port where the USB bus is connected. When you configure it to
  * "B", the registers PORTB, PINB and DDRB will be used.
  */
-#define USB_CFG_DMINUS_BIT      4
+#define USB_CFG_DMINUS_BIT 4
 /* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
  * This may be any bit in the port.
  */
-#define USB_CFG_DPLUS_BIT       2
+#define USB_CFG_DPLUS_BIT 2
 /* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
  * This may be any bit in the port. Please note that D+ must also be connected
  * to interrupt pin INT0! [You can also use other interrupts, see section
@@ -43,7 +43,7 @@ section at the end of this file).
  * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
  * markers every millisecond.]
  */
-#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+#define USB_CFG_CLOCK_KHZ (F_CPU / 1000)
 /* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
  * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
  * require no crystal, they tolerate +/- 1% deviation from the nominal
@@ -52,7 +52,7 @@ section at the end of this file).
  * Since F_CPU should be defined to your actual clock rate anyway, you should
  * not need to modify this setting.
  */
-#define USB_CFG_CHECK_CRC       0
+#define USB_CFG_CHECK_CRC 0
 /* Define this to 1 if you want that the driver checks integrity of incoming
  * data packets (CRC checks). CRC checks cost quite a bit of code size and are
  * currently only available for 18 MHz crystal clock. You must choose
@@ -75,18 +75,18 @@ section at the end of this file).
 
 /* --------------------------- Functional Range ---------------------------- */
 
-#define USB_CFG_HAVE_INTRIN_ENDPOINT    0
+#define USB_CFG_HAVE_INTRIN_ENDPOINT 0
 /* Define this to 1 if you want to compile a version with two endpoints: The
  * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
  * number).
  */
-#define USB_CFG_HAVE_INTRIN_ENDPOINT3   0
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3 0
 /* Define this to 1 if you want to compile a version with three endpoints: The
  * default control endpoint 0, an interrupt-in endpoint 3 (or the number
  * configured below) and a catch-all default interrupt-in endpoint as above.
  * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
  */
-#define USB_CFG_EP3_NUMBER              3
+#define USB_CFG_EP3_NUMBER 3
 /* If the so-called endpoint 3 is used, it can now be configured to any other
  * endpoint number (except 0) with this macro. Default if undefined is 3.
  */
@@ -96,13 +96,13 @@ section at the end of this file).
  * Since the token is toggled BEFORE sending any data, the first packet is
  * sent with the oposite value of this configuration!
  */
-#define USB_CFG_IMPLEMENT_HALT          0
+#define USB_CFG_IMPLEMENT_HALT 0
 /* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
  * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
  * it is required by the standard. We have made it a config option because it
  * bloats the code considerably.
  */
-#define USB_CFG_SUPPRESS_INTR_CODE      0
+#define USB_CFG_SUPPRESS_INTR_CODE 0
 /* Define this to 1 if you want to declare interrupt-in endpoints, but don't
  * want to send any data over them. If this macro is defined to 1, functions
  * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
@@ -110,48 +110,48 @@ section at the end of this file).
  * (e.g. HID), but never want to send any data. This option saves a couple
  * of bytes in flash memory and the transmit buffers in RAM.
  */
-#define USB_CFG_INTR_POLL_INTERVAL      10
+#define USB_CFG_INTR_POLL_INTERVAL 10
 /* If you compile a version with endpoint 1 (interrupt-in), this is the poll
  * interval. The value is in milliseconds and must not be less than 10 ms for
  * low speed devices.
  */
-#define USB_CFG_IS_SELF_POWERED         0
+#define USB_CFG_IS_SELF_POWERED 0
 /* Define this to 1 if the device has its own power supply. Set it to 0 if the
  * device is powered from the USB bus.
  */
-#define USB_CFG_MAX_BUS_POWER           100
+#define USB_CFG_MAX_BUS_POWER 100
 /* Set this variable to the maximum USB bus power consumption of your device.
  * The value is in milliamperes. [It will be divided by two since USB
  * communicates power requirements in units of 2 mA.]
  */
-#define USB_CFG_IMPLEMENT_FN_WRITE      0
+#define USB_CFG_IMPLEMENT_FN_WRITE 0
 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
  * transfers. Set it to 0 if you don't need it and want to save a couple of
  * bytes.
  */
-#define USB_CFG_IMPLEMENT_FN_READ       0
+#define USB_CFG_IMPLEMENT_FN_READ 0
 /* Set this to 1 if you need to send control replies which are generated
  * "on the fly" when usbFunctionRead() is called. If you only want to send
  * data from a static buffer, set it to 0 and return the data from
  * usbFunctionSetup(). This saves a couple of bytes.
  */
-#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
 /* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
  * You must implement the function usbFunctionWriteOut() which receives all
  * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
  * can be found in 'usbRxToken'.
  */
-#define USB_CFG_HAVE_FLOWCONTROL        0
+#define USB_CFG_HAVE_FLOWCONTROL 0
 /* Define this to 1 if you want flowcontrol over USB data. See the definition
  * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
  * usbdrv.h.
  */
-#define USB_CFG_DRIVER_FLASH_PAGE       0
+#define USB_CFG_DRIVER_FLASH_PAGE 0
 /* If the device has more than 64 kBytes of flash, define this to the 64 k page
  * where the driver's constants (descriptors) are located. Or in other words:
  * Define this to 1 for boot loaders on the ATMega128.
  */
-#define USB_CFG_LONG_TRANSFERS          0
+#define USB_CFG_LONG_TRANSFERS 0
 /* Define this to 1 if you want to send/receive blocks of more than 254 bytes
  * in a single control-in or control-out transfer. Note that the capability
  * for long transfers increases the driver size.
@@ -172,7 +172,7 @@ section at the end of this file).
 /* This macro (if defined) is executed when a USB SET_ADDRESS request was
  * received.
  */
-#define USB_COUNT_SOF                   0
+#define USB_COUNT_SOF 0
 /* define this macro to 1 if you need the global variable "usbSofCount" which
  * counts SOF packets. This feature requires that the hardware interrupt is
  * connected to D- instead of D+.
@@ -196,7 +196,7 @@ section at the end of this file).
  * Please note that Start Of Frame detection works only if D- is wired to the
  * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
  */
-#define USB_CFG_CHECK_DATA_TOGGLING     0
+#define USB_CFG_CHECK_DATA_TOGGLING 0
 /* define this macro to 1 if you want to filter out duplicate data packets
  * sent by the host. Duplicates occur only as a consequence of communication
  * errors, when the host does not receive an ACK. Please note that you need to
@@ -204,11 +204,11 @@ section at the end of this file).
  * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
  * for each control- and out-endpoint to check for duplicate packets.
  */
-#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
 /* define this macro to 1 if you want the function usbMeasureFrameLength()
  * compiled in. This function can be used to calibrate the AVR's RC oscillator.
  */
-#define USB_USE_FAST_CRC                0
+#define USB_USE_FAST_CRC 0
 /* The assembler module has two implementations for the CRC algorithm. One is
  * faster, the other is smaller. This CRC routine is only used for transmitted
  * messages where timing is not critical. The faster routine needs 31 cycles
@@ -219,7 +219,7 @@ section at the end of this file).
 
 /* -------------------------- Device Description --------------------------- */
 
-#define  USB_CFG_VENDOR_ID       0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */
+#define USB_CFG_VENDOR_ID 0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */
 /* USB vendor ID for the device, low byte first. If you have registered your
  * own Vendor ID, define it here. Otherwise you may use one of obdev's free
  * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
@@ -228,7 +228,7 @@ section at the end of this file).
  * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
  * the implications!
  */
-#define  USB_CFG_DEVICE_ID       0xdc, 0x05 /* = 0x05dc = 1500 */
+#define USB_CFG_DEVICE_ID 0xdc, 0x05 /* = 0x05dc = 1500 */
 /* This is the ID of the product, low byte first. It is interpreted in the
  * scope of the vendor ID. If you have registered your own VID with usb.org
  * or if you have licensed a PID from somebody else, define it here. Otherwise
@@ -239,10 +239,10 @@ section at the end of this file).
  * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
  * the implications!
  */
-#define USB_CFG_DEVICE_VERSION  0x00, 0x01
+#define USB_CFG_DEVICE_VERSION 0x00, 0x01
 /* Version number of the device: Minor number first, then major number.
  */
-#define USB_CFG_VENDOR_NAME     'o', 'b', 'd', 'e', 'v', '.', 'a', 't'
+#define USB_CFG_VENDOR_NAME 'o', 'b', 'd', 'e', 'v', '.', 'a', 't'
 #define USB_CFG_VENDOR_NAME_LEN 8
 /* These two values define the vendor name returned by the USB device. The name
  * must be given as a list of characters under single quotes. The characters
@@ -252,7 +252,7 @@ section at the end of this file).
  * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
  * details.
  */
-#define USB_CFG_DEVICE_NAME     'T', 'e', 'm', 'p', 'l', 'a', 't', 'e'
+#define USB_CFG_DEVICE_NAME 'T', 'e', 'm', 'p', 'l', 'a', 't', 'e'
 #define USB_CFG_DEVICE_NAME_LEN 8
 /* Same as above for the device name. If you don't want a device name, undefine
  * the macros. See the file USB-IDs-for-free.txt before you assign a name if
@@ -267,14 +267,14 @@ section at the end of this file).
  * to fine tune control over USB descriptors such as the string descriptor
  * for the serial number.
  */
-#define USB_CFG_DEVICE_CLASS        0xff    /* set to 0 if deferred to interface */
-#define USB_CFG_DEVICE_SUBCLASS     0
+#define USB_CFG_DEVICE_CLASS 0xff /* set to 0 if deferred to interface */
+#define USB_CFG_DEVICE_SUBCLASS 0
 /* See USB specification if you want to conform to an existing device class.
  * Class 0xff is "vendor specific".
  */
-#define USB_CFG_INTERFACE_CLASS     0   /* define class here if not at device level */
-#define USB_CFG_INTERFACE_SUBCLASS  0
-#define USB_CFG_INTERFACE_PROTOCOL  0
+#define USB_CFG_INTERFACE_CLASS 0 /* define class here if not at device level */
+#define USB_CFG_INTERFACE_SUBCLASS 0
+#define USB_CFG_INTERFACE_PROTOCOL 0
 /* See USB specification if you want to conform to an existing device class or
  * protocol. The following classes must be set at interface level:
  * HID class is 3, no subclass and protocol required (but may be useful!)
@@ -345,16 +345,16 @@ section at the end of this file).
  * };
  */
 
-#define USB_CFG_DESCR_PROPS_DEVICE                  0
-#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
-#define USB_CFG_DESCR_PROPS_STRINGS                 0
-#define USB_CFG_DESCR_PROPS_STRING_0                0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
-#define USB_CFG_DESCR_PROPS_HID                     0
-#define USB_CFG_DESCR_PROPS_HID_REPORT              0
-#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+#define USB_CFG_DESCR_PROPS_DEVICE 0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
+#define USB_CFG_DESCR_PROPS_STRINGS 0
+#define USB_CFG_DESCR_PROPS_STRING_0 0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_HID 0
+#define USB_CFG_DESCR_PROPS_HID_REPORT 0
+#define USB_CFG_DESCR_PROPS_UNKNOWN 0
 
 /* ----------------------- Optional MCU Description ------------------------ */
 
diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrv.c b/tmk_core/protocol/vusb/usbdrv/usbdrv.c
index 30cdc9dcfc..f69198b1b9 100644
--- a/tmk_core/protocol/vusb/usbdrv/usbdrv.c
+++ b/tmk_core/protocol/vusb/usbdrv/usbdrv.c
@@ -21,36 +21,36 @@ documentation of the entire driver.
 /* ------------------------------------------------------------------------- */
 
 /* raw USB registers / interface to assembler code: */
-uchar usbRxBuf[2*USB_BUFSIZE];  /* raw RX buffer: PID, 8 bytes data, 2 bytes CRC */
-uchar       usbInputBufOffset;  /* offset in usbRxBuf used for low level receiving */
-uchar       usbDeviceAddr;      /* assigned during enumeration, defaults to 0 */
-uchar       usbNewDeviceAddr;   /* device ID which should be set after status phase */
-uchar       usbConfiguration;   /* currently selected configuration. Administered by driver, but not used */
-volatile schar usbRxLen;        /* = 0; number of bytes in usbRxBuf; 0 means free, -1 for flow control */
-uchar       usbCurrentTok;      /* last token received or endpoint number for last OUT token if != 0 */
-uchar       usbRxToken;         /* token for data we received; or endpont number for last OUT */
-volatile uchar usbTxLen = USBPID_NAK;   /* number of bytes to transmit with next IN token or handshake token */
-uchar       usbTxBuf[USB_BUFSIZE];/* data to transmit with next IN, free if usbTxLen contains handshake token */
+uchar          usbRxBuf[2 * USB_BUFSIZE]; /* raw RX buffer: PID, 8 bytes data, 2 bytes CRC */
+uchar          usbInputBufOffset;         /* offset in usbRxBuf used for low level receiving */
+uchar          usbDeviceAddr;             /* assigned during enumeration, defaults to 0 */
+uchar          usbNewDeviceAddr;          /* device ID which should be set after status phase */
+uchar          usbConfiguration;          /* currently selected configuration. Administered by driver, but not used */
+volatile schar usbRxLen;                  /* = 0; number of bytes in usbRxBuf; 0 means free, -1 for flow control */
+uchar          usbCurrentTok;             /* last token received or endpoint number for last OUT token if != 0 */
+uchar          usbRxToken;                /* token for data we received; or endpont number for last OUT */
+volatile uchar usbTxLen = USBPID_NAK;     /* number of bytes to transmit with next IN token or handshake token */
+uchar          usbTxBuf[USB_BUFSIZE];     /* data to transmit with next IN, free if usbTxLen contains handshake token */
 #if USB_COUNT_SOF
-volatile uchar  usbSofCount;    /* incremented by assembler module every SOF */
+volatile uchar usbSofCount; /* incremented by assembler module every SOF */
 #endif
 #if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE
-usbTxStatus_t  usbTxStatus1;
-#   if USB_CFG_HAVE_INTRIN_ENDPOINT3
-usbTxStatus_t  usbTxStatus3;
-#   endif
+usbTxStatus_t usbTxStatus1;
+#    if USB_CFG_HAVE_INTRIN_ENDPOINT3
+usbTxStatus_t usbTxStatus3;
+#    endif
 #endif
 #if USB_CFG_CHECK_DATA_TOGGLING
-uchar       usbCurrentDataToken;/* when we check data toggling to ignore duplicate packets */
+uchar usbCurrentDataToken; /* when we check data toggling to ignore duplicate packets */
 #endif
 
 /* USB status registers / not shared with asm code */
-uchar               *usbMsgPtr;     /* data to transmit next -- ROM or RAM address */
-static usbMsgLen_t  usbMsgLen = USB_NO_MSG; /* remaining number of bytes */
-static uchar        usbMsgFlags;    /* flag values see below */
+uchar *            usbMsgPtr;              /* data to transmit next -- ROM or RAM address */
+static usbMsgLen_t usbMsgLen = USB_NO_MSG; /* remaining number of bytes */
+static uchar       usbMsgFlags;            /* flag values see below */
 
-#define USB_FLG_MSGPTR_IS_ROM   (1<<6)
-#define USB_FLG_USE_USER_RW     (1<<7)
+#define USB_FLG_MSGPTR_IS_ROM (1 << 6)
+#define USB_FLG_USE_USER_RW (1 << 7)
 
 /*
 optimizing hints:
@@ -64,196 +64,174 @@ optimizing hints:
 
 #if USB_CFG_DESCR_PROPS_STRINGS == 0
 
-#if USB_CFG_DESCR_PROPS_STRING_0 == 0
-#undef USB_CFG_DESCR_PROPS_STRING_0
-#define USB_CFG_DESCR_PROPS_STRING_0    sizeof(usbDescriptorString0)
-const PROGMEM char usbDescriptorString0[] = { /* language descriptor */
+#    if USB_CFG_DESCR_PROPS_STRING_0 == 0
+#        undef USB_CFG_DESCR_PROPS_STRING_0
+#        define USB_CFG_DESCR_PROPS_STRING_0 sizeof(usbDescriptorString0)
+const PROGMEM char usbDescriptorString0[] = {
+    /* language descriptor */
     4,          /* sizeof(usbDescriptorString0): length of descriptor in bytes */
     3,          /* descriptor type */
     0x09, 0x04, /* language index (0x0409 = US-English) */
 };
-#endif
+#    endif
 
-#if USB_CFG_DESCR_PROPS_STRING_VENDOR == 0 && USB_CFG_VENDOR_NAME_LEN
-#undef USB_CFG_DESCR_PROPS_STRING_VENDOR
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR   sizeof(usbDescriptorStringVendor)
-const PROGMEM int  usbDescriptorStringVendor[] = {
-    USB_STRING_DESCRIPTOR_HEADER(USB_CFG_VENDOR_NAME_LEN),
-    USB_CFG_VENDOR_NAME
-};
-#endif
+#    if USB_CFG_DESCR_PROPS_STRING_VENDOR == 0 && USB_CFG_VENDOR_NAME_LEN
+#        undef USB_CFG_DESCR_PROPS_STRING_VENDOR
+#        define USB_CFG_DESCR_PROPS_STRING_VENDOR sizeof(usbDescriptorStringVendor)
+const PROGMEM int usbDescriptorStringVendor[] = {USB_STRING_DESCRIPTOR_HEADER(USB_CFG_VENDOR_NAME_LEN), USB_CFG_VENDOR_NAME};
+#    endif
 
-#if USB_CFG_DESCR_PROPS_STRING_PRODUCT == 0 && USB_CFG_DEVICE_NAME_LEN
-#undef USB_CFG_DESCR_PROPS_STRING_PRODUCT
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT   sizeof(usbDescriptorStringDevice)
-const PROGMEM int  usbDescriptorStringDevice[] = {
-    USB_STRING_DESCRIPTOR_HEADER(USB_CFG_DEVICE_NAME_LEN),
-    USB_CFG_DEVICE_NAME
-};
-#endif
+#    if USB_CFG_DESCR_PROPS_STRING_PRODUCT == 0 && USB_CFG_DEVICE_NAME_LEN
+#        undef USB_CFG_DESCR_PROPS_STRING_PRODUCT
+#        define USB_CFG_DESCR_PROPS_STRING_PRODUCT sizeof(usbDescriptorStringDevice)
+const PROGMEM int usbDescriptorStringDevice[] = {USB_STRING_DESCRIPTOR_HEADER(USB_CFG_DEVICE_NAME_LEN), USB_CFG_DEVICE_NAME};
+#    endif
 
-#if USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER == 0 && USB_CFG_SERIAL_NUMBER_LEN
-#undef USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    sizeof(usbDescriptorStringSerialNumber)
-const PROGMEM int usbDescriptorStringSerialNumber[] = {
-    USB_STRING_DESCRIPTOR_HEADER(USB_CFG_SERIAL_NUMBER_LEN),
-    USB_CFG_SERIAL_NUMBER
-};
-#endif
+#    if USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER == 0 && USB_CFG_SERIAL_NUMBER_LEN
+#        undef USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+#        define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER sizeof(usbDescriptorStringSerialNumber)
+const PROGMEM int usbDescriptorStringSerialNumber[] = {USB_STRING_DESCRIPTOR_HEADER(USB_CFG_SERIAL_NUMBER_LEN), USB_CFG_SERIAL_NUMBER};
+#    endif
 
-#endif  /* USB_CFG_DESCR_PROPS_STRINGS == 0 */
+#endif /* USB_CFG_DESCR_PROPS_STRINGS == 0 */
 
 /* --------------------------- Device Descriptor --------------------------- */
 
 #if USB_CFG_DESCR_PROPS_DEVICE == 0
-#undef USB_CFG_DESCR_PROPS_DEVICE
-#define USB_CFG_DESCR_PROPS_DEVICE  sizeof(usbDescriptorDevice)
-const PROGMEM char usbDescriptorDevice[] = {    /* USB device descriptor */
-    18,         /* sizeof(usbDescriptorDevice): length of descriptor in bytes */
-    USBDESCR_DEVICE,        /* descriptor type */
-    0x10, 0x01,             /* USB version supported */
-    USB_CFG_DEVICE_CLASS,
-    USB_CFG_DEVICE_SUBCLASS,
-    0,                      /* protocol */
-    8,                      /* max packet size */
+#    undef USB_CFG_DESCR_PROPS_DEVICE
+#    define USB_CFG_DESCR_PROPS_DEVICE sizeof(usbDescriptorDevice)
+const PROGMEM char usbDescriptorDevice[] = {
+    /* USB device descriptor */
+    18,                                               /* sizeof(usbDescriptorDevice): length of descriptor in bytes */
+    USBDESCR_DEVICE,                                  /* descriptor type */
+    0x10, 0x01,                                       /* USB version supported */
+    USB_CFG_DEVICE_CLASS, USB_CFG_DEVICE_SUBCLASS, 0, /* protocol */
+    8,                                                /* max packet size */
     /* the following two casts affect the first byte of the constant only, but
      * that's sufficient to avoid a warning with the default values.
      */
-    (char)USB_CFG_VENDOR_ID,/* 2 bytes */
-    (char)USB_CFG_DEVICE_ID,/* 2 bytes */
-    USB_CFG_DEVICE_VERSION, /* 2 bytes */
-    USB_CFG_DESCR_PROPS_STRING_VENDOR != 0 ? 1 : 0,         /* manufacturer string index */
-    USB_CFG_DESCR_PROPS_STRING_PRODUCT != 0 ? 2 : 0,        /* product string index */
-    USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER != 0 ? 3 : 0,  /* serial number string index */
-    1,          /* number of configurations */
+    (char)USB_CFG_VENDOR_ID,                               /* 2 bytes */
+    (char)USB_CFG_DEVICE_ID,                               /* 2 bytes */
+    USB_CFG_DEVICE_VERSION,                                /* 2 bytes */
+    USB_CFG_DESCR_PROPS_STRING_VENDOR != 0 ? 1 : 0,        /* manufacturer string index */
+    USB_CFG_DESCR_PROPS_STRING_PRODUCT != 0 ? 2 : 0,       /* product string index */
+    USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER != 0 ? 3 : 0, /* serial number string index */
+    1,                                                     /* number of configurations */
 };
 #endif
 
 /* ----------------------- Configuration Descriptor ------------------------ */
 
 #if USB_CFG_DESCR_PROPS_HID_REPORT != 0 && USB_CFG_DESCR_PROPS_HID == 0
-#undef USB_CFG_DESCR_PROPS_HID
-#define USB_CFG_DESCR_PROPS_HID     9   /* length of HID descriptor in config descriptor below */
+#    undef USB_CFG_DESCR_PROPS_HID
+#    define USB_CFG_DESCR_PROPS_HID 9 /* length of HID descriptor in config descriptor below */
 #endif
 
 #if USB_CFG_DESCR_PROPS_CONFIGURATION == 0
-#undef USB_CFG_DESCR_PROPS_CONFIGURATION
-#define USB_CFG_DESCR_PROPS_CONFIGURATION   sizeof(usbDescriptorConfiguration)
-PROGMEM char usbDescriptorConfiguration[] = {    /* USB configuration descriptor */
-    9,          /* sizeof(usbDescriptorConfiguration): length of descriptor in bytes */
-    USBDESCR_CONFIG,    /* descriptor type */
-    18 + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT3 +
-                (USB_CFG_DESCR_PROPS_HID & 0xff), 0,
-                /* total length of data returned (including inlined descriptors) */
-    1,          /* number of interfaces in this configuration */
-    1,          /* index of this configuration */
-    0,          /* configuration name string index */
-#if USB_CFG_IS_SELF_POWERED
-    (1 << 7) | USBATTR_SELFPOWER,       /* attributes */
-#else
-    (1 << 7),                           /* attributes */
-#endif
-    USB_CFG_MAX_BUS_POWER/2,            /* max USB current in 2mA units */
-/* interface descriptor follows inline: */
-    9,          /* sizeof(usbDescrInterface): length of descriptor in bytes */
-    USBDESCR_INTERFACE, /* descriptor type */
-    0,          /* index of this interface */
-    0,          /* alternate setting for this interface */
-    USB_CFG_HAVE_INTRIN_ENDPOINT + USB_CFG_HAVE_INTRIN_ENDPOINT3, /* endpoints excl 0: number of endpoint descriptors to follow */
-    USB_CFG_INTERFACE_CLASS,
-    USB_CFG_INTERFACE_SUBCLASS,
-    USB_CFG_INTERFACE_PROTOCOL,
-    0,          /* string index for interface */
-#if (USB_CFG_DESCR_PROPS_HID & 0xff)    /* HID descriptor */
-    9,          /* sizeof(usbDescrHID): length of descriptor in bytes */
-    USBDESCR_HID,   /* descriptor type: HID */
-    0x01, 0x01, /* BCD representation of HID version */
-    0x00,       /* target country code */
-    0x01,       /* number of HID Report (or other HID class) Descriptor infos to follow */
-    0x22,       /* descriptor type: report */
-    USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH, 0,  /* total length of report descriptor */
-#endif
-#if USB_CFG_HAVE_INTRIN_ENDPOINT    /* endpoint descriptor for endpoint 1 */
-    7,          /* sizeof(usbDescrEndpoint) */
-    USBDESCR_ENDPOINT,  /* descriptor type = endpoint */
-    (char)0x81, /* IN endpoint number 1 */
-    0x03,       /* attrib: Interrupt endpoint */
-    8, 0,       /* maximum packet size */
-    USB_CFG_INTR_POLL_INTERVAL, /* in ms */
-#endif
-#if USB_CFG_HAVE_INTRIN_ENDPOINT3   /* endpoint descriptor for endpoint 3 */
-    7,          /* sizeof(usbDescrEndpoint) */
-    USBDESCR_ENDPOINT,  /* descriptor type = endpoint */
+#    undef USB_CFG_DESCR_PROPS_CONFIGURATION
+#    define USB_CFG_DESCR_PROPS_CONFIGURATION sizeof(usbDescriptorConfiguration)
+PROGMEM char usbDescriptorConfiguration[] = {
+    /* USB configuration descriptor */
+    9,               /* sizeof(usbDescriptorConfiguration): length of descriptor in bytes */
+    USBDESCR_CONFIG, /* descriptor type */
+    18 + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT3 + (USB_CFG_DESCR_PROPS_HID & 0xff), 0,
+    /* total length of data returned (including inlined descriptors) */
+    1, /* number of interfaces in this configuration */
+    1, /* index of this configuration */
+    0, /* configuration name string index */
+#    if USB_CFG_IS_SELF_POWERED
+    (1 << 7) | USBATTR_SELFPOWER, /* attributes */
+#    else
+    (1 << 7), /* attributes */
+#    endif
+    USB_CFG_MAX_BUS_POWER / 2,                                                          /* max USB current in 2mA units */
+                                                                                        /* interface descriptor follows inline: */
+    9,                                                                                  /* sizeof(usbDescrInterface): length of descriptor in bytes */
+    USBDESCR_INTERFACE,                                                                 /* descriptor type */
+    0,                                                                                  /* index of this interface */
+    0,                                                                                  /* alternate setting for this interface */
+    USB_CFG_HAVE_INTRIN_ENDPOINT + USB_CFG_HAVE_INTRIN_ENDPOINT3,                       /* endpoints excl 0: number of endpoint descriptors to follow */
+    USB_CFG_INTERFACE_CLASS, USB_CFG_INTERFACE_SUBCLASS, USB_CFG_INTERFACE_PROTOCOL, 0, /* string index for interface */
+#    if (USB_CFG_DESCR_PROPS_HID & 0xff)                                                /* HID descriptor */
+    9,                                                                                  /* sizeof(usbDescrHID): length of descriptor in bytes */
+    USBDESCR_HID,                                                                       /* descriptor type: HID */
+    0x01, 0x01,                                                                         /* BCD representation of HID version */
+    0x00,                                                                               /* target country code */
+    0x01,