Split out arm_atsam shift register logic (#14848)

1 files changed, 0 insertions, 70 deletions

diff --git a/tmk_core/protocol/arm_atsam/spi.h b/tmk_core/protocol/arm_atsam/spi.h
deleted file mode 100644
index dcd45f31af..0000000000
--- a/tmk_core/protocol/arm_atsam/spi.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
-Copyright 2018 Massdrop Inc.
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _SPI_H_
-#define _SPI_H_
-
-/* Macros for Shift Register control */
-#define SR_EXP_RCLK_LO PORT->Group[SR_EXP_RCLK_PORT].OUTCLR.reg = (1 << SR_EXP_RCLK_PIN)
-#define SR_EXP_RCLK_HI PORT->Group[SR_EXP_RCLK_PORT].OUTSET.reg = (1 << SR_EXP_RCLK_PIN)
-#define SR_EXP_OE_N_ENA PORT->Group[SR_EXP_OE_N_PORT].OUTCLR.reg = (1 << SR_EXP_OE_N_PIN)
-#define SR_EXP_OE_N_DIS PORT->Group[SR_EXP_OE_N_PORT].OUTSET.reg = (1 << SR_EXP_OE_N_PIN)
-
-/* Determine bits to set for mux selection */
-#if SR_EXP_DATAOUT_PIN % 2 == 0
-#    define SR_EXP_DATAOUT_MUX_SEL PMUXE
-#else
-#    define SR_EXP_DATAOUT_MUX_SEL PMUXO
-#endif
-
-/* Determine bits to set for mux selection */
-#if SR_EXP_SCLK_PIN % 2 == 0
-#    define SR_EXP_SCLK_MUX_SEL PMUXE
-#else
-#    define SR_EXP_SCLK_MUX_SEL PMUXO
-#endif
-
-/* Data structure to define Shift Register output expander hardware */
-/* This structure gets shifted into registers LSB first */
-typedef union {
-    struct {
-        uint16_t RSVD4 : 1;       /*!< bit:      0                                               */
-        uint16_t RSVD3 : 1;       /*!< bit:      1                                               */
-        uint16_t RSVD2 : 1;       /*!< bit:      2                                               */
-        uint16_t RSVD1 : 1;       /*!< bit:      3                                               */
-        uint16_t SDB_N : 1;       /*!< bit:      4  SHUTDOWN THE CHIP WHEN 0, RUN WHEN 1         */
-        uint16_t IRST : 1;        /*!< bit:      5  RESET THE IS3733 I2C WHEN 1, RUN WHEN 0      */
-        uint16_t SRC_2 : 1;       /*!< bit:      6  ADVERTISE A SOURCE TO USBC-2 CC              */
-        uint16_t SRC_1 : 1;       /*!< bit:      7  ADVERTISE A SOURCE TO USBC-1 CC              */
-        uint16_t E_VBUS_2 : 1;    /*!< bit:      8  ENABLE 5V OUT TO USBC-2 WHEN 1               */
-        uint16_t E_VBUS_1 : 1;    /*!< bit:      9  ENABLE 5V OUT TO USBC-1 WHEN 1               */
-        uint16_t E_DN1_N : 1;     /*!< bit:     10  ENABLE DN1 1:2 MUX WHEN 0                    */
-        uint16_t S_DN1 : 1;       /*!< bit:     11  SELECT DN1 PATH 0:USBC-1, 1:USBC-2           */
-        uint16_t E_UP_N : 1;      /*!< bit:     12  ENABLE SUP 1:2 MUX WHEN 0                    */
-        uint16_t S_UP : 1;        /*!< bit:     13  SELECT UP PATH 0:USBC-1, 1:USBC-2            */
-        uint16_t HUB_RESET_N : 1; /*!< bit:     14  RESET USB HUB WHEN 0, RUN WHEN 1             */
-        uint16_t HUB_CONNECT : 1; /*!< bit:     15  SIGNAL VBUS CONNECT TO USB HUB WHEN 1        */
-    } bit;                        /*!< Structure used for bit access                             */
-    uint16_t reg;                 /*!< Type      used for register access                        */
-} sr_exp_t;
-
-extern sr_exp_t sr_exp_data;
-
-void SR_EXP_WriteData(void);
-void SR_EXP_Init(void);
-
-#endif  //_SPI_H_