2020 November 28 Breaking Changes Update (#11053)

* Branch point for 2020 November 28 Breaking Change                                                

* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)                                           

* Add support for soft serial to ATmega32U2 (#10204)                                               

* Change MIDI velocity implementation to allow direct control of velocity value (#9940)            

* Add ability to build a subset of all keyboards based on platform.                                

* Actually use eeprom_driver_init().                                                               

* Make bootloader_jump weak for ChibiOS. (#10417)                                                  

* Joystick 16-bit support (#10439)                                                                 

* Per-encoder resolutions (#10259)                                                                 

* Share button state from mousekey to pointing_device (#10179)                                     

* Add hotfix for chibios keyboards not wake (#10088)                                               

* Add advanced/efficient RGB Matrix Indicators (#8564)                                             

* Naming change.                                                                                   

* Support for STM32 GPIOF,G,H,I,J,K (#10206)                                                       

* Add milc as a dependency and remove the installed milc (#10563)                                  

* ChibiOS upgrade: early init conversions (#10214)                                                 

* ChibiOS upgrade: configuration file migrator (#9952)                                             

* Haptic and solenoid cleanup (#9700)                                                              

* XD75 cleanup (#10524)                                                                            

* OLED display update interval support (#10388)                                                    

* Add definition based on currently-selected serial driver. (#10716)                               

* New feature: Retro Tapping per key (#10622)                                                      

* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)             

* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)

* Rescale both ChibiOS and AVR backlighting.                                                       

* Reduce Helix keyboard build variation (#8669)                                                    

* Minor change to behavior allowing display updates to continue between task ticks (#10750)        

* Some GPIO manipulations in matrix.c change to atomic. (#10491)                                   

* qmk cformat (#10767)                                                                             

* [Keyboard] Update the Speedo firmware for v3.0 (#10657)                                          

* Maartenwut/Maarten namechange to evyd13/Evy (#10274)                                             

* [quantum] combine repeated lines of code (#10837)                                                

* Add step sequencer feature (#9703)                                                               

* aeboards/ext65 refactor (#10820)                                                                 

* Refactor xelus/dawn60 for Rev2 later (#10584)                                                    

* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)                                 

* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)                                    

* update chibios os usb for the otg driver (#8893)                                                 

* Remove HD44780 References, Part 4 (#10735)                                                       

* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)                                                

* Fix cursor position bug in oled_write_raw functions (#10800)                                     

* Fixup version.h writing when using SKIP_VERSION=yes (#10972)                                     

* Allow for certain code in the codebase assuming length of string. (#10974)                       

* Add AT90USB support for serial.c (#10706)                                                        

* Auto shift: support repeats and early registration (#9826)                                       

* Rename ledmatrix.h to match .c file (#7949)                                                      

* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)                                        

* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)                                        

* Merge point for 2020 Nov 28 Breaking Change                                                      

14 files changed, 585 insertions, 662 deletions

diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/config.h b/platforms/chibios/BLACKPILL_STM32_F401/configs/config.h
index eb73e72ef2..1c9d9c6126 100644
--- a/platforms/chibios/BLACKPILL_STM32_F401/configs/config.h
+++ b/platforms/chibios/BLACKPILL_STM32_F401/configs/config.h
@@ -20,4 +20,6 @@
 #define STM32_LSECLK 32768U
 #define STM32_HSECLK 25000000U
 
-#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
+#    define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+#endif
diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/config.h b/platforms/chibios/BLACKPILL_STM32_F411/configs/config.h
index eb73e72ef2..1c9d9c6126 100644
--- a/platforms/chibios/BLACKPILL_STM32_F411/configs/config.h
+++ b/platforms/chibios/BLACKPILL_STM32_F411/configs/config.h
@@ -20,4 +20,6 @@
 #define STM32_LSECLK 32768U
 #define STM32_HSECLK 25000000U
 
-#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
+#    define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+#endif
diff --git a/platforms/chibios/GENERIC_STM32_F042X6/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_F042X6/configs/mcuconf.h
new file mode 100644
index 0000000000..4643e9f92e
--- /dev/null
+++ b/platforms/chibios/GENERIC_STM32_F042X6/configs/mcuconf.h
@@ -0,0 +1,168 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+        http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */
\ No newline at end of file
diff --git a/platforms/chibios/GENERIC_STM32_F072XB/board/board.c b/platforms/chibios/GENERIC_STM32_F072XB/board/board.c
deleted file mode 100644
index c91136e8f6..0000000000
--- a/platforms/chibios/GENERIC_STM32_F072XB/board/board.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#include "hal.h"
-#include "stm32_gpio.h"
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types.                                         */
-/*===========================================================================*/
-
-/**
- * @brief   Type of STM32 GPIO port setup.
- */
-typedef struct {
-    uint32_t moder;
-    uint32_t otyper;
-    uint32_t ospeedr;
-    uint32_t pupdr;
-    uint32_t odr;
-    uint32_t afrl;
-    uint32_t afrh;
-} gpio_setup_t;
-
-/**
- * @brief   Type of STM32 GPIO initialization data.
- */
-typedef struct {
-#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
-    gpio_setup_t PAData;
-#endif
-#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
-    gpio_setup_t PBData;
-#endif
-#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
-    gpio_setup_t PCData;
-#endif
-#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
-    gpio_setup_t PDData;
-#endif
-#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
-    gpio_setup_t PEData;
-#endif
-#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
-    gpio_setup_t PFData;
-#endif
-#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
-    gpio_setup_t PGData;
-#endif
-#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
-    gpio_setup_t PHData;
-#endif
-#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
-    gpio_setup_t PIData;
-#endif
-#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
-    gpio_setup_t PJData;
-#endif
-#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
-    gpio_setup_t PKData;
-#endif
-} gpio_config_t;
-
-/**
- * @brief   STM32 GPIO static initialization data.
- */
-static const gpio_config_t gpio_default_config = {
-#if STM32_HAS_GPIOA
-    {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-    {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-    {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-    {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-    {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-    {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-    {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-    {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-    {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
-#endif
-#if STM32_HAS_GPIOJ
-    {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
-#endif
-#if STM32_HAS_GPIOK
-    {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
-#endif
-};
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
-    gpiop->OTYPER  = config->otyper;
-    gpiop->OSPEEDR = config->ospeedr;
-    gpiop->PUPDR   = config->pupdr;
-    gpiop->ODR     = config->odr;
-    gpiop->AFRL    = config->afrl;
-    gpiop->AFRH    = config->afrh;
-    gpiop->MODER   = config->moder;
-}
-
-static void stm32_gpio_init(void) {
-    /* Enabling GPIO-related clocks, the mask comes from the
-       registry header file.*/
-    rccResetAHB(STM32_GPIO_EN_MASK);
-    rccEnableAHB(STM32_GPIO_EN_MASK, true);
-
-    /* Initializing all the defined GPIO ports.*/
-#if STM32_HAS_GPIOA
-    gpio_init(GPIOA, &gpio_default_config.PAData);
-#endif
-#if STM32_HAS_GPIOB
-    gpio_init(GPIOB, &gpio_default_config.PBData);
-#endif
-#if STM32_HAS_GPIOC
-    gpio_init(GPIOC, &gpio_default_config.PCData);
-#endif
-#if STM32_HAS_GPIOD
-    gpio_init(GPIOD, &gpio_default_config.PDData);
-#endif
-#if STM32_HAS_GPIOE
-    gpio_init(GPIOE, &gpio_default_config.PEData);
-#endif
-#if STM32_HAS_GPIOF
-    gpio_init(GPIOF, &gpio_default_config.PFData);
-#endif
-#if STM32_HAS_GPIOG
-    gpio_init(GPIOG, &gpio_default_config.PGData);
-#endif
-#if STM32_HAS_GPIOH
-    gpio_init(GPIOH, &gpio_default_config.PHData);
-#endif
-#if STM32_HAS_GPIOI
-    gpio_init(GPIOI, &gpio_default_config.PIData);
-#endif
-#if STM32_HAS_GPIOJ
-    gpio_init(GPIOJ, &gpio_default_config.PJData);
-#endif
-#if STM32_HAS_GPIOK
-    gpio_init(GPIOK, &gpio_default_config.PKData);
-#endif
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {}
-
-/**
- * @brief   Early initialization code.
- * @details GPIO ports and system clocks are initialized before everything
- *          else.
- */
-void __early_init(void) {
-    enter_bootloader_mode_if_requested();
-
-    stm32_gpio_init();
-    stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-    (void)sdcp;
-    /* TODO: Fill the implementation.*/
-    return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-    (void)sdcp;
-    /* TODO: Fill the implementation.*/
-    return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-    (void)mmcp;
-    /* TODO: Fill the implementation.*/
-    return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-    (void)mmcp;
-    /* TODO: Fill the implementation.*/
-    return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {}
diff --git a/platforms/chibios/GENERIC_STM32_F072XB/board/board.h b/platforms/chibios/GENERIC_STM32_F072XB/board/board.h
deleted file mode 100644
index 87570e62d2..0000000000
--- a/platforms/chibios/GENERIC_STM32_F072XB/board/board.h
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#ifndef BOARD_H
-#define BOARD_H
-
-/*===========================================================================*/
-/* Driver constants.                                                         */
-/*===========================================================================*/
-
-/*
- * Setup for Generic STM32_F072 Board
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_GENERIC_STM32_F072XB
-#define BOARD_NAME "STM32_F072"
-
-/*
- * Board oscillators-related settings.
- * NOTE: LSE not fitted.
- * NOTE: HSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#    define STM32_LSECLK 0U
-#endif
-
-#define STM32_LSEDRV (3U << 3U)
-
-#if !defined(STM32_HSECLK)
-#    define STM32_HSECLK 0U
-#endif
-
-#define STM32_HSE_BYPASS
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F072xB
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON 0U
-#define GPIOA_PIN1 1U
-#define GPIOA_PIN2 2U
-#define GPIOA_PIN3 3U
-#define GPIOA_PIN4 4U
-#define GPIOA_PIN5 5U
-#define GPIOA_PIN6 6U
-#define GPIOA_PIN7 7U
-#define GPIOA_PIN8 8U
-#define GPIOA_PIN9 9U
-#define GPIOA_PIN10 10U
-#define GPIOA_USB_DM 11U
-#define GPIOA_USB_DP 12U
-#define GPIOA_SWDIO 13U
-#define GPIOA_SWCLK 14U
-#define GPIOA_PIN15 15U
-
-#define GPIOB_PIN0 0U
-#define GPIOB_PIN1 1U
-#define GPIOB_PIN2 2U
-#define GPIOB_PIN3 3U
-#define GPIOB_PIN4 4U
-#define GPIOB_PIN5 5U
-#define GPIOB_PIN6 6U
-#define GPIOB_PIN7 7U
-#define GPIOB_PIN8 8U
-#define GPIOB_PIN9 9U
-#define GPIOB_PIN10 10U
-#define GPIOB_PIN11 11U
-#define GPIOB_PIN12 12U
-#define GPIOB_SPI2_SCK 13U
-#define GPIOB_SPI2_MISO 14U
-#define GPIOB_SPI2_MOSI 15U
-
-#define GPIOC_MEMS_CS 0U
-#define GPIOC_PIN1 1U
-#define GPIOC_PIN2 2U
-#define GPIOC_PIN3 3U
-#define GPIOC_PIN4 4U
-#define GPIOC_PIN5 5U
-#define GPIOC_LED_RED 6U
-#define GPIOC_LED_BLUE 7U
-#define GPIOC_LED_ORANGE 8U
-#define GPIOC_LED_GREEN 9U
-#define GPIOC_PIN10 10U
-#define GPIOC_PIN11 11U
-#define GPIOC_PIN12 12U
-#define GPIOC_PIN13 13U
-#define GPIOC_OSC32_IN 14U
-#define GPIOC_OSC32_OUT 15U
-
-#define GPIOD_PIN0 0U
-#define GPIOD_PIN1 1U
-#define GPIOD_PIN2 2U
-#define GPIOD_PIN3 3U
-#define GPIOD_PIN4 4U
-#define GPIOD_PIN5 5U
-#define GPIOD_PIN6 6U
-#define GPIOD_PIN7 7U
-#define GPIOD_PIN8 8U
-#define GPIOD_PIN9 9U
-#define GPIOD_PIN10 10U
-#define GPIOD_PIN11 11U
-#define GPIOD_PIN12 12U
-#define GPIOD_PIN13 13U
-#define GPIOD_PIN14 14U
-#define GPIOD_PIN15 15U
-
-#define GPIOE_PIN0 0U
-#define GPIOE_PIN1 1U
-#define GPIOE_PIN2 2U
-#define GPIOE_PIN3 3U
-#define GPIOE_PIN4 4U
-#define GPIOE_PIN5 5U
-#define GPIOE_PIN6 6U
-#define GPIOE_PIN7 7U
-#define GPIOE_PIN8 8U
-#define GPIOE_PIN9 9U
-#define GPIOE_PIN10 10U
-#define GPIOE_PIN11 11U
-#define GPIOE_PIN12 12U
-#define GPIOE_PIN13 13U
-#define GPIOE_PIN14 14U
-#define GPIOE_PIN15 15U
-
-#define GPIOF_OSC_IN 0U
-#define GPIOF_OSC_OUT 1U
-#define GPIOF_PIN2 2U
-#define GPIOF_PIN3 3U
-#define GPIOF_PIN4 4U
-#define GPIOF_PIN5 5U
-#define GPIOF_PIN6 6U
-#define GPIOF_PIN7 7U
-#define GPIOF_PIN8 8U
-#define GPIOF_PIN9 9U
-#define GPIOF_PIN10 10U
-#define GPIOF_PIN11 11U
-#define GPIOF_PIN12 12U
-#define GPIOF_PIN13 13U
-#define GPIOF_PIN14 14U
-#define GPIOF_PIN15 15U
-
-/*
- * IO lines assignments.
- */
-#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
-#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
-#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
-#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
-#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
-#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
-#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
-#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
-#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
-#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
-#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
-#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
-#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
-#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
-#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
-#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
-#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
-
-/*===========================================================================*/
-/* Driver pre-compile time settings.                                         */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Derived constants and error checks.                                       */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types.                                         */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver macros.                                                            */
-/*===========================================================================*/
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n)*2U))
-#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U))
-#define PIN_MODE_ANALOG(n) (3U << ((n)*2U))
-#define PIN_ODR_LOW(n) (0U << (n))
-#define PIN_ODR_HIGH(n) (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U))
-#define PIN_OSPEED_LOW(n) (1U << ((n)*2U))
-#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U))
-#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U))
-#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U))
-#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U))
-#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U))
-#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
-
-/*
- * GPIOA setup:
- *
- * PA0  - BUTTON                    (input floating).
- * PA1  - PIN1                      (input pullup).
- * PA2  - PIN2                      (input pullup).
- * PA3  - PIN3                      (input pullup).
- * PA4  - PIN4                      (input pullup).
- * PA5  - PIN5                      (input pullup).
- * PA6  - PIN6                      (input pullup).
- * PA7  - PIN7                      (input pullup).
- * PA8  - PIN8                      (input pullup).
- * PA9  - PIN9                      (input pullup).
- * PA10 - PIN10                     (input pullup).
- * PA11 - USB_DM                    (input floating).
- * PA12 - USB_DP                    (input floating).
- * PA13 - SWDIO                     (alternate 0).
- * PA14 - SWCLK                     (alternate 0).
- * PA15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | PIN_MODE_INPUT(GPIOA_PIN1) | PIN_MODE_INPUT(GPIOA_PIN2) | PIN_MODE_INPUT(GPIOA_PIN3) | PIN_MODE_INPUT(GPIOA_PIN4) | PIN_MODE_INPUT(GPIOA_PIN5) | PIN_MODE_INPUT(GPIOA_PIN6) | PIN_MODE_INPUT(GPIOA_PIN7) | PIN_MODE_INPUT(GPIOA_PIN8) | PIN_MODE_INPUT(GPIOA_PIN9) | PIN_MODE_INPUT(GPIOA_PIN10) | PIN_MODE_INPUT(GPIOA_USB_DM) | PIN_MODE_INPUT(GPIOA_USB_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | PIN_OSPEED_VERYLOW(GPIOA_PIN1) | PIN_OSPEED_VERYLOW(GPIOA_PIN2) | PIN_OSPEED_VERYLOW(GPIOA_PIN3) | PIN_OSPEED_VERYLOW(GPIOA_PIN4) | PIN_OSPEED_VERYLOW(GPIOA_PIN5) | PIN_OSPEED_VERYLOW(GPIOA_PIN6) | PIN_OSPEED_VERYLOW(GPIOA_PIN7) | PIN_OSPEED_VERYLOW(GPIOA_PIN8) | PIN_OSPEED_VERYLOW(GPIOA_PIN9) | PIN_OSPEED_VERYLOW(GPIOA_PIN10) | PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | PIN_PUPDR_PULLUP(GPIOA_PIN1) | PIN_PUPDR_PULLUP(GPIOA_PIN2) | PIN_PUPDR_PULLUP(GPIOA_PIN3) | PIN_PUPDR_PULLUP(GPIOA_PIN4) | PIN_PUPDR_PULLUP(GPIOA_PIN5) | PIN_PUPDR_PULLUP(GPIOA_PIN6) | PIN_PUPDR_PULLUP(GPIOA_PIN7) | PIN_PUPDR_PULLUP(GPIOA_PIN8) | PIN_PUPDR_PULLUP(GPIOA_PIN9) | PIN_PUPDR_PULLUP(GPIOA_PIN10) | PIN_PUPDR_FLOATING(GPIOA_USB_DM) | PIN_PUPDR_FLOATING(GPIOA_USB_DP) | PIN_PUPDR_PULLUP(GPIOA_SWDIO) | PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | PIN_ODR_HIGH(GPIOA_PIN1) | PIN_ODR_HIGH(GPIOA_PIN2) | PIN_ODR_HIGH(GPIOA_PIN3) | PIN_ODR_HIGH(GPIOA_PIN4) | PIN_ODR_HIGH(GPIOA_PIN5) | PIN_ODR_HIGH(GPIOA_PIN6) | PIN_ODR_HIGH(GPIOA_PIN7) | PIN_ODR_HIGH(GPIOA_PIN8) | PIN_ODR_HIGH(GPIOA_PIN9) | PIN_ODR_HIGH(GPIOA_PIN10) | PIN_ODR_HIGH(GPIOA_USB_DM) | PIN_ODR_HIGH(GPIOA_USB_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | PIN_AFIO_AF(GPIOA_PIN1, 0U) | PIN_AFIO_AF(GPIOA_PIN2, 0U) | PIN_AFIO_AF(GPIOA_PIN3, 0U) | PIN_AFIO_AF(GPIOA_PIN4, 0U) | PIN_AFIO_AF(GPIOA_PIN5, 0U) | PIN_AFIO_AF(GPIOA_PIN6, 0U) | PIN_AFIO_AF(GPIOA_PIN7, 0U))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | PIN_AFIO_AF(GPIOA_PIN9, 0U) | PIN_AFIO_AF(GPIOA_PIN10, 0U) | PIN_AFIO_AF(GPIOA_USB_DM, 0U) | PIN_AFIO_AF(GPIOA_USB_DP, 0U) | PIN_AFIO_AF(GPIOA_SWDIO, 0U) | PIN_AFIO_AF(GPIOA_SWCLK, 0U) | PIN_AFIO_AF(GPIOA_PIN15, 0U))
-
-/*
- * GPIOB setup:
- *
- * PB0  - PIN0                      (input pullup).
- * PB1  - PIN1                      (input pullup).
- * PB2  - PIN2                      (input pullup).
- * PB3  - PIN3                      (input pullup).
- * PB4  - PIN4                      (input pullup).
- * PB5  - PIN5                      (input pullup).
- * PB6  - PIN6                      (input pullup).
- * PB7  - PIN7                      (input pullup).
- * PB8  - PIN8                      (input pullup).
- * PB9  - PIN9                      (input pullup).
- * PB10 - PIN10                     (input pullup).
- * PB11 - PIN11                     (input pullup).
- * PB12 - PIN12                     (input pullup).
- * PB13 - SPI2_SCK                  (alternate 0).
- * PB14 - SPI2_MISO                 (alternate 0).
- * PB15 - SPI2_MOSI                 (alternate 0).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_INPUT(GPIOB_PIN3) | PIN_MODE_INPUT(GPIOB_PIN4) | PIN_MODE_INPUT(GPIOB_PIN5) | PIN_MODE_INPUT(GPIOB_PIN6) | PIN_MODE_INPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_PIN8) | PIN_MODE_INPUT(GPIOB_PIN9) | PIN_MODE_INPUT(GPIOB_PIN10) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | PIN_OSPEED_VERYLOW(GPIOB_PIN1) | PIN_OSPEED_HIGH(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_PIN3) | PIN_OSPEED_HIGH(GPIOB_PIN4) | PIN_OSPEED_VERYLOW(GPIOB_PIN5) | PIN_OSPEED_VERYLOW(GPIOB_PIN6) | PIN_OSPEED_VERYLOW(GPIOB_PIN7) | PIN_OSPEED_VERYLOW(GPIOB_PIN8) | PIN_OSPEED_VERYLOW(GPIOB_PIN9) | PIN_OSPEED_VERYLOW(GPIOB_PIN10) | PIN_OSPEED_VERYLOW(GPIOB_PIN11) | PIN_OSPEED_VERYLOW(GPIOB_PIN12) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_PULLUP(GPIOB_PIN3) | PIN_PUPDR_PULLUP(GPIOB_PIN4) | PIN_PUPDR_PULLUP(GPIOB_PIN5) | PIN_PUPDR_PULLUP(GPIOB_PIN6) | PIN_PUPDR_PULLUP(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_PIN8) | PIN_PUPDR_PULLUP(GPIOB_PIN9) | PIN_PUPDR_PULLUP(GPIOB_PIN10) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_PIN3) | PIN_ODR_HIGH(GPIOB_PIN4) | PIN_ODR_HIGH(GPIOB_PIN5) | PIN_ODR_HIGH(GPIOB_PIN6) | PIN_ODR_HIGH(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_PIN8) | PIN_ODR_HIGH(GPIOB_PIN9) | PIN_ODR_HIGH(GPIOB_PIN10) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_SPI2_SCK) | PIN_ODR_HIGH(GPIOB_SPI2_MISO) | PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | PIN_AFIO_AF(GPIOB_PIN1, 0U) | PIN_AFIO_AF(GPIOB_PIN2, 0U) | PIN_AFIO_AF(GPIOB_PIN3, 0U) | PIN_AFIO_AF(GPIOB_PIN4, 0U) | PIN_AFIO_AF(GPIOB_PIN5, 0U) | PIN_AFIO_AF(GPIOB_PIN6, 0U) | PIN_AFIO_AF(GPIOB_PIN7, 0U))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | PIN_AFIO_AF(GPIOB_PIN9, 0U) | PIN_AFIO_AF(GPIOB_PIN10, 0U) | PIN_AFIO_AF(GPIOB_PIN11, 0U) | PIN_AFIO_AF(GPIOB_PIN12, 0U) | PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
-
-/*
- *