HD44780 driver rework (#16370)

2 files changed, 0 insertions, 890 deletions

diff --git a/platforms/avr/drivers/hd44780.c b/platforms/avr/drivers/hd44780.c
deleted file mode 100644
index f15d7d0da8..0000000000
--- a/platforms/avr/drivers/hd44780.c
+++ /dev/null
@@ -1,542 +0,0 @@
-/****************************************************************************
- Title:     HD44780U LCD library
- Author:    Peter Fleury <pfleury@gmx.ch>  http://tinyurl.com/peterfleury
- License:   GNU General Public License Version 3
- File:	    $Id: lcd.c,v 1.15.2.2 2015/01/17 12:16:05 peter Exp $
- Software:  AVR-GCC 3.3
- Target:    any AVR device, memory mapped mode only for AT90S4414/8515/Mega
-
- DESCRIPTION
-       Basic routines for interfacing a HD44780U-based text lcd display
-
-       Originally based on Volker Oth's lcd library,
-       changed lcd_init(), added additional constants for lcd_command(),
-       added 4-bit I/O mode, improved and optimized code.
-
-       Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in
-       4-bit IO port mode (LCD_IO_MODE=1). 8-bit IO port mode not supported.
-
-       Memory mapped mode compatible with Kanda STK200, but supports also
-       generation of R/W signal through A8 address line.
-
- USAGE
-       See the C include lcd.h file for a description of each function
-
-*****************************************************************************/
-#include <inttypes.h>
-#include <avr/io.h>
-#include <avr/pgmspace.h>
-#include <util/delay.h>
-#include "hd44780.h"
-
-/*
-** constants/macros
-*/
-#define DDR(x) (*(&x - 1)) /* address of data direction register of port x */
-#if defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
-/* on ATmega64/128 PINF is on port 0x00 and not 0x60 */
-#    define PIN(x) (&PORTF == &(x) ? _SFR_IO8(0x00) : (*(&x - 2)))
-#else
-#    define PIN(x) (*(&x - 2)) /* address of input register of port x          */
-#endif
-
-#if LCD_IO_MODE
-#    define lcd_e_delay() _delay_us(LCD_DELAY_ENABLE_PULSE)
-#    define lcd_e_high() LCD_E_PORT |= _BV(LCD_E_PIN);
-#    define lcd_e_low() LCD_E_PORT &= ~_BV(LCD_E_PIN);
-#    define lcd_e_toggle() toggle_e()
-#    define lcd_rw_high() LCD_RW_PORT |= _BV(LCD_RW_PIN)
-#    define lcd_rw_low() LCD_RW_PORT &= ~_BV(LCD_RW_PIN)
-#    define lcd_rs_high() LCD_RS_PORT |= _BV(LCD_RS_PIN)
-#    define lcd_rs_low() LCD_RS_PORT &= ~_BV(LCD_RS_PIN)
-#endif
-
-#if LCD_IO_MODE
-#    if LCD_LINES == 1
-#        define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_1LINE
-#    else
-#        define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_2LINES
-#    endif
-#else
-#    if LCD_LINES == 1
-#        define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_1LINE
-#    else
-#        define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_2LINES
-#    endif
-#endif
-
-#if LCD_CONTROLLER_KS0073
-#    if LCD_LINES == 4
-
-#        define KS0073_EXTENDED_FUNCTION_REGISTER_ON 0x2C  /* |0|010|1100 4-bit mode, extension-bit RE = 1 */
-#        define KS0073_EXTENDED_FUNCTION_REGISTER_OFF 0x28 /* |0|010|1000 4-bit mode, extension-bit RE = 0 */
-#        define KS0073_4LINES_MODE 0x09                    /* |0|000|1001 4 lines mode */
-
-#    endif
-#endif
-
-/*
-** function prototypes
-*/
-#if LCD_IO_MODE
-static void toggle_e(void);
-#endif
-
-/*
-** local functions
-*/
-
-/*************************************************************************
-delay for a minimum of <us> microseconds
-the number of loops is calculated at compile-time from MCU clock frequency
-*************************************************************************/
-#define delay(us) _delay_us(us)
-
-#if LCD_IO_MODE
-/* toggle Enable Pin to initiate write */
-static void toggle_e(void) {
-    lcd_e_high();
-    lcd_e_delay();
-    lcd_e_low();
-}
-#endif
-
-/*************************************************************************
-Low-level function to write byte to LCD controller
-Input:    data   byte to write to LCD
-          rs     1: write data
-                 0: write instruction
-Returns:  none
-*************************************************************************/
-#if LCD_IO_MODE
-static void lcd_write(uint8_t data, uint8_t rs) {
-    unsigned char dataBits;
-
-    if (rs) { /* write data        (RS=1, RW=0) */
-        lcd_rs_high();
-    } else { /* write instruction (RS=0, RW=0) */
-        lcd_rs_low();
-    }
-    lcd_rw_low(); /* RW=0  write mode      */
-
-    if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
-        /* configure data pins as output */
-        DDR(LCD_DATA0_PORT) |= 0x0F;
-
-        /* output high nibble first */
-        dataBits       = LCD_DATA0_PORT & 0xF0;
-        LCD_DATA0_PORT = dataBits | ((data >> 4) & 0x0F);
-        lcd_e_toggle();
-
-        /* output low nibble */
-        LCD_DATA0_PORT = dataBits | (data & 0x0F);
-        lcd_e_toggle();
-
-        /* all data pins high (inactive) */
-        LCD_DATA0_PORT = dataBits | 0x0F;
-    } else {
-        /* configure data pins as output */
-        DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN);
-        DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN);
-        DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN);
-        DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN);
-
-        /* output high nibble first */
-        LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN);
-        LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN);
-        LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN);
-        LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);
-        if (data & 0x80) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
-        if (data & 0x40) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
-        if (data & 0x20) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
-        if (data & 0x10) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
-        lcd_e_toggle();
-
-        /* output low nibble */
-        LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN);
-        LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN);
-        LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN);
-        LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);
-        if (data & 0x08) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
-        if (data & 0x04) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
-        if (data & 0x02) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
-        if (data & 0x01) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
-        lcd_e_toggle();
-
-        /* all data pins high (inactive) */
-        LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
-        LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
-        LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
-        LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
-    }
-}
-#else
-#    define lcd_write(d, rs)                        \
-        if (rs)                                     \
-            *(volatile uint8_t *)(LCD_IO_DATA) = d; \
-        else                                        \
-            *(volatile uint8_t *)(LCD_IO_FUNCTION) = d;
-/* rs==0 -> write instruction to LCD_IO_FUNCTION */
-/* rs==1 -> write data to LCD_IO_DATA */
-#endif
-
-/*************************************************************************
-Low-level function to read byte from LCD controller
-Input:    rs     1: read data
-                 0: read busy flag / address counter
-Returns:  byte read from LCD controller
-*************************************************************************/
-#if LCD_IO_MODE
-static uint8_t lcd_read(uint8_t rs) {
-    uint8_t data;
-
-    if (rs)
-        lcd_rs_high(); /* RS=1: read data      */
-    else
-        lcd_rs_low(); /* RS=0: read busy flag */
-    lcd_rw_high();    /* RW=1  read mode      */
-
-    if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
-        DDR(LCD_DATA0_PORT) &= 0xF0; /* configure data pins as input */
-
-        lcd_e_high();
-        lcd_e_delay();
-        data = PIN(LCD_DATA0_PORT) << 4; /* read high nibble first */
-        lcd_e_low();
-
-        lcd_e_delay(); /* Enable 500ns low       */
-
-        lcd_e_high();
-        lcd_e_delay();
-        data |= PIN(LCD_DATA0_PORT) & 0x0F; /* read low nibble        */
-        lcd_e_low();
-    } else {
-        /* configure data pins as input */
-        DDR(LCD_DATA0_PORT) &= ~_BV(LCD_DATA0_PIN);
-        DDR(LCD_DATA1_PORT) &= ~_BV(LCD_DATA1_PIN);
-        DDR(LCD_DATA2_PORT) &= ~_BV(LCD_DATA2_PIN);
-        DDR(LCD_DATA3_PORT) &= ~_BV(LCD_DATA3_PIN);
-
-        /* read high nibble first */
-        lcd_e_high();
-        lcd_e_delay();
-        data = 0;
-        if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x10;
-        if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x20;
-        if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x40;
-        if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x80;
-        lcd_e_low();
-
-        lcd_e_delay(); /* Enable 500ns low       */
-
-        /* read low nibble */
-        lcd_e_high();
-        lcd_e_delay();
-        if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x01;
-        if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x02;
-        if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x04;
-        if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x08;
-        lcd_e_low();
-    }
-    return data;
-}
-#else
-#    define lcd_read(rs) (rs) ? *(volatile uint8_t *)(LCD_IO_DATA + LCD_IO_READ) : *(volatile uint8_t *)(LCD_IO_FUNCTION + LCD_IO_READ)
-/* rs==0 -> read instruction from LCD_IO_FUNCTION */
-/* rs==1 -> read data from LCD_IO_DATA */
-#endif
-
-/*************************************************************************
-loops while lcd is busy, returns address counter
-*************************************************************************/
-static uint8_t lcd_waitbusy(void)
-
-{
-    register uint8_t c;
-
-    /* wait until busy flag is cleared */
-    while ((c = lcd_read(0)) & (1 << LCD_BUSY)) {
-    }
-
-    /* the address counter is updated 4us after the busy flag is cleared */
-    delay(LCD_DELAY_BUSY_FLAG);
-
-    /* now read the address counter */
-    return (lcd_read(0)); // return address counter
-
-} /* lcd_waitbusy */
-
-/*************************************************************************
-Move cursor to the start of next line or to the first line if the cursor
-is already on the last line.
-*************************************************************************/
-static inline void lcd_newline(uint8_t pos) {
-    register uint8_t addressCounter;
-
-#if LCD_LINES == 1
-    addressCounter = 0;
-#endif
-#if LCD_LINES == 2
-    if (pos < (LCD_START_LINE2))
-        addressCounter = LCD_START_LINE2;
-    else
-        addressCounter = LCD_START_LINE1;
-#endif
-#if LCD_LINES == 4
-#    if KS0073_4LINES_MODE
-    if (pos < LCD_START_LINE2)
-        addressCounter = LCD_START_LINE2;
-    else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE3))
-        addressCounter = LCD_START_LINE3;
-    else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE4))
-        addressCounter = LCD_START_LINE4;
-    else
-        addressCounter = LCD_START_LINE1;
-#    else
-    if (pos < LCD_START_LINE3)
-        addressCounter = LCD_START_LINE2;
-    else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE4))
-        addressCounter = LCD_START_LINE3;
-    else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE2))
-        addressCounter = LCD_START_LINE4;
-    else
-        addressCounter = LCD_START_LINE1;
-#    endif
-#endif
-    lcd_command((1 << LCD_DDRAM) + addressCounter);
-
-} /* lcd_newline */
-
-/*
-** PUBLIC FUNCTIONS
-*/
-
-/*************************************************************************
-Send LCD controller instruction command
-Input:   instruction to send to LCD controller, see HD44780 data sheet
-Returns: none
-*************************************************************************/
-void lcd_command(uint8_t cmd) {
-    lcd_waitbusy();
-    lcd_write(cmd, 0);
-}
-
-/*************************************************************************
-Send data byte to LCD controller
-Input:   data to send to LCD controller, see HD44780 data sheet
-Returns: none
-*************************************************************************/
-void lcd_data(uint8_t data) {
-    lcd_waitbusy();
-    lcd_write(data, 1);
-}
-
-/*************************************************************************
-Set cursor to specified position
-Input:    x  horizontal position  (0: left most position)
-          y  vertical position    (0: first line)
-Returns:  none
-*************************************************************************/
-void lcd_gotoxy(uint8_t x, uint8_t y) {
-#if LCD_LINES == 1
-    lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
-#endif
-#if LCD_LINES == 2
-    if (y == 0)
-        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
-    else
-        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x);
-#endif
-#if LCD_LINES == 4
-    if (y == 0)
-        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
-    else if (y == 1)
-        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x);
-    else if (y == 2)
-        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE3 + x);
-    else /* y==3 */
-        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE4 + x);
-#endif
-
-} /* lcd_gotoxy */
-
-/*************************************************************************
-*************************************************************************/
-int lcd_getxy(void) {
-    return lcd_waitbusy();
-}
-
-/*************************************************************************
-Clear display and set cursor to home position
-*************************************************************************/
-void lcd_clrscr(void) {
-    lcd_command(1 << LCD_CLR);
-}
-
-/*************************************************************************
-Set cursor to home position
-*************************************************************************/
-void lcd_home(void) {
-    lcd_command(1 << LCD_HOME);
-}
-
-/*************************************************************************
-Display character at current cursor position
-Input:    character to be displayed
-Returns:  none
-*************************************************************************/
-void lcd_putc(char c) {
-    uint8_t pos;
-
-    pos = lcd_waitbusy(); // read busy-flag and address counter
-    if (c == '\n') {
-        lcd_newline(pos);
-    } else {
-#if LCD_WRAP_LINES == 1
-#    if LCD_LINES == 1
-        if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
-            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
-        }
-#    elif LCD_LINES == 2
-        if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
-            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0);
-        } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) {
-            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
-        }
-#    elif LCD_LINES == 4
-        if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
-            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0);
-        } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) {
-            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE3, 0);
-        } else if (pos == LCD_START_LINE3 + LCD_DISP_LENGTH) {
-            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE4, 0);
-        } else if (pos == LCD_START_LINE4 + LCD_DISP_LENGTH) {
-            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
-        }
-#    endif
-        lcd_waitbusy();
-#endif
-        lcd_write(c, 1);
-    }
-
-} /* lcd_putc */
-
-/*************************************************************************
-Display string without auto linefeed
-Input:    string to be displayed
-Returns:  none
-*************************************************************************/
-void lcd_puts(const char *s)
-/* print string on lcd (no auto linefeed) */
-{
-    register char c;
-
-    while ((c = *s++)) {
-        lcd_putc(c);
-    }
-
-} /* lcd_puts */
-
-/*************************************************************************
-Display string from program memory without auto linefeed
-Input:     string from program memory be be displayed
-Returns:   none
-*************************************************************************/
-void lcd_puts_p(const char *progmem_s)
-/* print string from program memory on lcd (no auto linefeed) */
-{
-    register char c;
-
-    while ((c = pgm_read_byte(progmem_s++))) {
-        lcd_putc(c);
-    }
-
-} /* lcd_puts_p */
-
-/*************************************************************************
-Initialize display and select type of cursor
-Input:    dispAttr LCD_DISP_OFF            display off
-                   LCD_DISP_ON             display on, cursor off
-                   LCD_DISP_ON_CURSOR      display on, cursor on
-                   LCD_DISP_CURSOR_BLINK   display on, cursor on flashing
-Returns:  none
-*************************************************************************/
-void lcd_init(uint8_t dispAttr) {
-#if LCD_IO_MODE
-    /*
-     *  Initialize LCD to 4 bit I/O mode
-     */
-
-    if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (&LCD_RS_PORT == &LCD_DATA0_PORT) && (&LCD_RW_PORT == &LCD_DATA0_PORT) && (&LCD_E_PORT == &LCD_DATA0_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) && (LCD_RS_PIN == 4) && (LCD_RW_PIN == 5) && (LCD_E_PIN == 6)) {
-        /* configure all port bits as output (all LCD lines on same port) */
-        DDR(LCD_DATA0_PORT) |= 0x7F;
-    } else if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
-        /* configure all port bits as output (all LCD data lines on same port, but control lines on different ports) */
-        DDR(LCD_DATA0_PORT) |= 0x0F;
-        DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN);
-        DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN);
-        DDR(LCD_E_PORT) |= _BV(LCD_E_PIN);
-    } else {
-        /* configure all port bits as output (LCD data and control lines on different ports */
-        DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN);
-        DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN);
-        DDR(LCD_E_PORT) |= _BV(LCD_E_PIN);
-        DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN);
-        DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN);
-        DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN);
-        DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN);
-    }
-    delay(LCD_DELAY_BOOTUP); /* wait 16ms or more after power-on       */
-
-    /* initial write to lcd is 8bit */
-    LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); // LCD_FUNCTION>>4;
-    LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); // LCD_FUNCTION_8BIT>>4;
-    lcd_e_toggle();
-    delay(LCD_DELAY_INIT); /* delay, busy flag can't be checked here */
-
-    /* repeat last command */
-    lcd_e_toggle();
-    delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */
-
-    /* repeat last command a third time */
-    lcd_e_toggle();
-    delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */
-
-    /* now configure for 4bit mode */
-    LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); // LCD_FUNCTION_4BIT_1LINE>>4
-    lcd_e_toggle();
-    delay(LCD_DELAY_INIT_4BIT); /* some displays need this additional delay */
-
-    /* from now the LCD only accepts 4 bit I/O, we can use lcd_command() */
-#else
-    /*
-     * Initialize LCD to 8 bit memory mapped mode
-     */
-
-    /* enable external SRAM (memory mapped lcd) and one wait state */
-    MCUCR = _BV(SRE) | _BV(SRW);
-
-    /* reset LCD */
-    delay(LCD_DELAY_BOOTUP);               /* wait 16ms after power-on     */
-    lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */
-    delay(LCD_DELAY_INIT);                 /* wait 5ms                     */
-    lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */
-    delay(LCD_DELAY_INIT_REP);             /* wait 64us                    */
-    lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */
-    delay(LCD_DELAY_INIT_REP);             /* wait 64us                    */
-#endif
-
-#if KS0073_4LINES_MODE
-    /* Display with KS0073 controller requires special commands for enabling 4 line mode */
-    lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_ON);
-    lcd_command(KS0073_4LINES_MODE);
-    lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_OFF);
-#else
-    lcd_command(LCD_FUNCTION_DEFAULT);     /* function set: display lines  */
-#endif
-    lcd_command(LCD_DISP_OFF);     /* display off                  */
-    lcd_clrscr();                  /* display clear                */
-    lcd_command(LCD_MODE_DEFAULT); /* set entry mode               */
-    lcd_command(dispAttr);         /* display/cursor control       */
-
-} /* lcd_init */
diff --git a/platforms/avr/drivers/hd44780.h b/platforms/avr/drivers/hd44780.h
deleted file mode 100644
index 08e60f8a44..0000000000
--- a/platforms/avr/drivers/hd44780.h
+++ /dev/null
@@ -1,348 +0,0 @@
-/*************************************************************************
- Title	:   C include file for the HD44780U LCD library (lcd.c)
- Author:    Peter Fleury <pfleury@gmx.ch>  http://tinyurl.com/peterfleury
- License:   GNU General Public License Version 3
- File:	    $Id: lcd.h,v 1.14.2.4 2015/01/20 17:16:07 peter Exp $
- Software:  AVR-GCC 4.x
- Hardware:  any AVR device, memory mapped mode only for AVR with
-            memory mapped interface (AT90S8515/ATmega8515/ATmega128)
-***************************************************************************/
-
-/**
- @mainpage
- Collection of libraries for AVR-GCC
- @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury
- @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3
-
- @file
- @defgroup pfleury_lcd LCD library <lcd.h>
- @code #include <lcd.h> @endcode
-
- @brief Basic routines for interfacing a HD44780U-based character LCD display
-
- LCD character displays can be found in many devices, like espresso machines, laser printers.
- The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays.
-
- This library allows easy interfacing with a HD44780 compatible display and can be
- operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in
- 4-bit IO port mode (LCD_IO_MODE defined as 1). 8-bit IO port mode is not supported.
-
- Memory mapped mode is compatible with old Kanda STK200 starter kit, but also supports
- generation of R/W signal through A8 address line.
-
- @see The chapter <a href=" http://homepage.hispeed.ch/peterfleury/avr-lcd44780.html" target="_blank">Interfacing a HD44780 Based LCD to an AVR</a>
-      on my home page, which shows example circuits how to connect an LCD to an AVR controller.
-
- @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury
-
- @version   2.0
-
- @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3
-
-*/
-
-#pragma once
-
-#include <inttypes.h>
-#include <avr/pgmspace.h>
-
-#if (__GNUC__ * 100 + __GNUC_MINOR__) < 405
-#    error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !"
-#endif
-
-/**@{*/
-
-/*
- * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file
- * by adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile
- * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
- */
-#ifdef _LCD_DEFINITIONS_FILE
-#    include "lcd_definitions.h"
-#endif
-
-/**
- * @name  Definition for LCD controller type
- * Use 0 for HD44780 controller, change to 1 for displays with KS0073 controller.
- */
-#ifndef LCD_CONTROLLER_KS0073
-#    define LCD_CONTROLLER_KS0073 0 /**< Use 0 for HD44780 controller, 1 for KS0073 controller */
-#endif
-
-/**
- * @name  Definitions for Display Size
- * Change these definitions to adapt setting to your display
- *
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
- * adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile.
- * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
- *
- */
-#ifndef LCD_LINES
-#    define LCD_LINES 2 /**< number of visible lines of the display */
-#endif
-#ifndef LCD_DISP_LENGTH
-#    define LCD_DISP_LENGTH 16 /**< visibles characters per line of the display */
-#endif
-#ifndef LCD_LINE_LENGTH
-#    define LCD_LINE_LENGTH 0x40 /**< internal line length of the display    */
-#endif
-#ifndef LCD_START_LINE1
-#    define LCD_START_LINE1 0x00 /**< DDRAM address of first char of line 1 */
-#endif
-#ifndef LCD_START_LINE2
-#    define LCD_START_LINE2 0x40 /**< DDRAM address of first char of line 2 */
-#endif
-#ifndef LCD_START_LINE3
-#    define LCD_START_LINE3 0x14 /**< DDRAM address of first char of line 3 */
-#endif
-#ifndef LCD_START_LINE4
-#    define LCD_START_LINE4 0x54 /**< DDRAM address of first char of line 4 */
-#endif
-#ifndef LCD_WRAP_LINES
-#    define LCD_WRAP_LINES 0 /**< 0: no wrap, 1: wrap at end of visibile line */
-#endif
-
-/**
- * @name Definitions for 4-bit IO mode
- *
- * The four LCD data lines and the three control lines RS, RW, E can be on the
- * same port or on different ports.
- * Change LCD_RS_PORT, LCD_RW_PORT, LCD_E_PORT if you want the control lines on
- * different ports.
- *
- * Normally the four data lines should be mapped to bit 0..3 on one port, but it
- * is possible to connect these data lines in different order or even on different
- * ports by adapting the LCD_DATAx_PORT and LCD_DATAx_PIN definitions.
- *
- * Adjust these definitions to your target.\n
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
- * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile.
- * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
- *
- */
-#define LCD_IO_MODE 1 /**< 0: memory mapped mode, 1: IO port mode */
-
-#if LCD_IO_MODE
-
-#    ifndef LCD_PORT
-#        define LCD_PORT PORTA /**< port for the LCD lines   */
-#    endif
-#    ifndef LCD_DATA0_PORT
-#        define LCD_DATA0_PORT LCD_PORT /**< port for 4bit data bit 0 */
-#    endif
-#    ifndef LCD_DATA1_PORT
-#        define LCD_DATA1_PORT LCD_PORT /**< port for 4bit data bit 1 */
-#    endif
-#    ifndef LCD_DATA2_PORT
-#        define LCD_DATA2_PORT LCD_PORT /**< port for 4bit data bit 2 */
-#    endif
-#    ifndef LCD_DATA3_PORT
-#        define LCD_DATA3_PORT LCD_PORT /**< port for 4bit data bit 3 */
-#    endif
-#    ifndef LCD_DATA0_PIN
-#        define LCD_DATA0_PIN 4 /**< pin for 4bit data bit 0  */
-#    endif
-#    ifndef LCD_DATA1_PIN
-#        define LCD_DATA1_PIN 5 /**< pin for 4bit data bit 1  */
-#    endif
-#    ifndef LCD_DATA2_PIN
-#        define LCD_DATA2_PIN 6 /**< pin for 4bit data bit 2  */
-#    endif
-#    ifndef LCD_DATA3_PIN
-#        define LCD_DATA3_PIN 7 /**< pin for 4bit data bit 3  */
-#    endif
-#    ifndef LCD_RS_PORT
-#        define LCD_RS_PORT LCD_PORT /**< port for RS line         */
-#    endif
-#    ifndef LCD_RS_PIN
-#        define LCD_RS_PIN 3 /**< pin  for RS line         */
-#    endif
-#    ifndef LCD_RW_PORT
-#        define LCD_RW_PORT LCD_PORT /**< port for RW line         */
-#    endif
-#    ifndef LCD_RW_PIN
-#        define LCD_RW_PIN 2 /**< pin  for RW line         */
-#    endif
-#    ifndef LCD_E_PORT
-#        define LCD_E_PORT LCD_PORT /**< port for Enable line     */
-#    endif
-#    ifndef LCD_E_PIN
-#        define LCD_E_PIN 1 /**< pin  for Enable line     */
-#    endif
-
-#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__)
-/*
- * memory mapped mode is only supported when the device has an external data memory interface
- */
-#    define LCD_IO_DATA 0xC000     /* A15=E=1, A14=RS=1                 */
-#    define LCD_IO_FUNCTION 0x8000 /* A15=E=1, A14=RS=0                 */
-#    define LCD_IO_READ 0x0100     /* A8 =R/W=1 (R/W: 1=Read, 0=Write   */
-
-#else
-#    error "external data memory interface not available for this device, use 4-bit IO port mode"
-
-#endif
-
-/**
- * @name Definitions of delays
- * Used to calculate delay timers.
- * Adapt the F_CPU define in the Makefile to the clock frequency in Hz of your target
- *
- * These delay times can be adjusted, if some displays require different delays.\n
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
- * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile.
- * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
- */
-#ifndef LCD_DELAY_BOOTUP
-#    define LCD_DELAY_BOOTUP 16000 /**< delay in micro seconds after power-on  */
-#endif
-#ifndef LCD_DELAY_INIT
-#    define LCD_DELAY_INIT 5000 /**< delay in micro seconds after initialization command sent  */
-#endif
-#ifndef LCD_DELAY_INIT_REP
-#    define LCD_DELAY_INIT_REP 64 /**< delay in micro seconds after initialization command repeated */
-#endif
-#ifndef LCD_DELAY_INIT_4BIT
-#    define LCD_DELAY_INIT_4BIT 64 /**< delay in micro seconds after setting 4-bit mode */
-#endif
-#ifndef LCD_DELAY_BUSY_FLAG
-#    define LCD_DELAY_BUSY_FLAG 4 /**< time in micro seconds the address counter is updated after busy flag is cleared */
-#endif
-#ifndef LCD_DELAY_ENABLE_PULSE
-#    define LCD_DELAY_ENABLE_PULSE 1 /**< enable signal pulse width in micro seconds */
-#endif
-
-/**
- * @name Definitions for LCD command instructions
- * The constants define the various LCD controller instructions which can be passed to the
- * function lcd_command(), see HD44780 data sheet for a complete description.
- */
-
-/* instruction register bit positions, see HD44780U data sheet */
-#define LCD_CLR 0             /* DB0: clear display                  */
-#define LCD_HOME 1            /* DB1: return to home position        */
-#define LCD_ENTRY_MODE 2      /* DB2: set entry mode                 */
-#define LCD_ENTRY_INC 1       /*   DB1: 1=increment, 0=decrement     */
-#define LCD_ENTRY_SHIFT 0     /*   DB2: 1=display shift on           */
-#define LCD_ON 3              /* DB3: turn lcd/cursor on             */
-#define LCD_ON_DISPLAY 2      /*   DB2: turn display on              */
-#define LCD_ON_CURSOR 1       /*   DB1: turn cursor on               */
-#define LCD_ON_BLINK 0        /*     DB0: blinking cursor ?          */
-#define LCD_MOVE 4            /* DB4: move cursor/display            */
-#define LCD_MOVE_DISP 3       /*   DB3: move display (0-> cursor) ?  */
-#define LCD_MOVE_RIGHT 2      /*   DB2: move right (0-> left) ?      */
-#define LCD_FUNCTION 5        /* DB5: function set                   */
-#define LCD_FUNCTION_8BIT 4   /*   DB4: set 8BIT mode (0->4BIT mode) */
-#define LCD_FUNCTION_2LINES 3 /*   DB3: two lines (0->one line)      */
-#define LCD_FUNCTION_10DOTS 2 /*   DB2: 5x10 font (0->5x7 font)      */
-#define LCD_CGRAM 6           /* DB6: set CG RAM address             */
-#define LCD_DDRAM 7           /* DB7: set DD RAM address             */
-#define LCD_BUSY 7            /* DB7: LCD is busy                    */
-
-/* set entry mode: display shift on/off, dec/inc cursor move direction */
-#define LCD_ENTRY_DEC 0x04       /* display shift off, dec cursor move dir */
-#define LCD_ENTRY_DEC_SHIFT 0x05 /* display shift on,  dec cursor move dir */
-#define LCD_ENTRY_INC_ 0x06      /* display shift off, inc cursor move dir */
-#define LCD_ENTRY_INC_SHIFT 0x07 /* display shift on,  inc cursor move dir */
-
-/* display on/off, cursor on/off, blinking char at cursor position */
-#define LCD_DISP_OFF 0x08             /* display off                            */
-#define LCD_DISP_ON 0x0C              /* display on, cursor off                 */
-#define LCD_DISP_ON_BLINK 0x0D        /* display on, cursor off, blink char     */
-#define LCD_DISP_ON_CURSOR 0x0E       /* display on, cursor on                  */
-#define LCD_DISP_ON_CURSOR_BLINK 0x0F /* display on, cursor on, blink char      */
-
-/* move cursor/shift display */
-#define LCD_MOVE_CURSOR_LEFT 0x10  /* move cursor left  (decrement)          */
-#define LCD_MOVE_CURSOR_RIGHT 0x14 /* move cursor right (increment)          */
-#define LCD_MOVE_DISP_LEFT 0x18    /* shift display left                     */
-#define LCD_MOVE_DISP_RIGHT 0x1C   /* shift display right                    */
-
-/* function set: set interface data length and number of display lines */
-#define LCD_FUNCTION_4BIT_1LINE 0x20  /* 4-bit interface, single line, 5x7 dots */
-#define LCD_FUNCTION_4BIT_2LINES 0x28 /* 4-bit interface, dual line,   5x7 dots */
-#define LCD_FUNCTION_8BIT_1LINE 0x30  /* 8-bit interface, single line, 5x7 dots */
-#define LCD_FUNCTION_8BIT_2LINES 0x38 /* 8-bit interface, dual line,   5x7 dots */
-
-#define LCD_MODE_DEFAULT ((1 << LCD_ENTRY_MODE) | (1 << LCD_ENTRY_INC))
-
-/**
- *  @name Functions
- */
-
-/**
- @brief    Initialize display and select type of cursor
- @param    dispAttr \b LCD_DISP_OFF display off\n
-                    \b LCD_DISP_ON display on, cursor off\n
-                    \b LCD_DISP_ON_CURSOR display on, cursor on\n
-                    \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing
- @return  none
-*/
-extern void lcd_init(uint8_t dispAttr);
-
-/**
- @brief    Clear display and set cursor to home position
- @return   none
-*/
-extern void lcd_clrscr(void);
-
-/**
- @brief    Set cursor to home position
- @return   none
-*/
-extern void lcd_home(void);
-
-/**
- @brief    Set cursor to specified position
-
- @param    x horizontal position\n (0: left most position)
- @param    y vertical position\n   (0: first line)
- @return   none
-*/
-extern void lcd_gotoxy(uint8_t x, uint8_t y);
-
-/**
- @brief    Display character at current cursor position
- @param    c character to be displayed
- @return   none
-*/
-extern void lcd_putc(char c);
-
-/**
- @brief    Display string without auto linefeed
- @param    s string to be displayed
- @return   none
-*/
-extern void lcd_puts(const char *s);
-
-/**
- @brief    Display string from program memory without auto linefeed
- @param    progmem_s string from program memory be be displayed
- @return   none
- @see      lcd_puts_P
-*/
-extern void lcd_puts_p(const char *progmem_s);
-
-/**
- @brief    Send LCD controller instruction command
- @param    cmd instruction to send to LCD controller, see HD44780 data sheet
- @return   none
-*/
-extern void lcd_command(uint8_t cmd);
-
-/**
- @brief    Send data byte to LCD controller
-
- Similar to lcd_putc(), but without interpreting LF
- @param    data byte to send to LCD controller, see HD44780 data sheet
- @return   none
-*/
-extern void lcd_data(uint8_t data);
-
-/**
- @brief macros for automatically storing string constant in program memory
-*/
-#define lcd_puts_P(__s) lcd_puts_p(PSTR(__s))
-
-/**@}*/