perform nomal keyboard behavior. It works now!!!

1 files changed, 100 insertions, 195 deletions

diff --git a/mykey.c b/mykey.c
index 098bb4e51f..93f753f01f 100644
--- a/mykey.c
+++ b/mykey.c
@@ -1,3 +1,6 @@
+/* 2010/08/23 noname
+ * keyboard firmware based on PJRC USB keyboard example
+ */
 /* Keyboard example with debug channel, for Teensy USB Development Board
  * http://www.pjrc.com/teensy/usb_keyboard.html
  * Copyright (c) 2008 PJRC.COM, LLC
@@ -27,211 +30,115 @@
 #include <util/delay.h>
 #include "usb_keyboard_debug.h"
 #include "print.h"
+#include "matrix.h"
 #include "keymap.h"
 
-#define LED_CONFIG	(DDRD |= (1<<6))
-#define LED_ON		(PORTD &= ~(1<<6))
-#define LED_OFF		(PORTD |= (1<<6))
-#define CPU_PRESCALE(n)	(CLKPR = 0x80, CLKPR = (n))
+#define LED_CONFIG    (DDRD |= (1<<6))
+#define LED_ON        (PORTD &= ~(1<<6))
+#define LED_OFF        (PORTD |= (1<<6))
+#define CPU_PRESCALE(n)    (CLKPR = 0x80, CLKPR = (n))
 
-uint8_t number_keys[10]=
-	{KEY_0,KEY_1,KEY_2,KEY_3,KEY_4,KEY_5,KEY_6,KEY_7,KEY_8,KEY_9};
 
 uint16_t idle_count=0;
 
 
 
-//
-// scan matrix
-//
-uint8_t MAX_ROW = 9;
-
-// initialize ports for matrix
-void port_setup(void)
+int main(void)
 {
-        // Column: input w/pullup
-	DDRB = 0x00;
-	PORTB = 0xFF;
-
-        // Row: Hi-Z(unselected)
-        // PD:0,1,2,3,6,7
-        // PC:6,7
-        // PF:7
-	DDRD = 0x00;
-	PORTD = 0x00;
-	DDRC = 0x00;
-	PORTC = 0x00;
-	DDRF = 0x00;
-	PORTF = 0x00;
-}
+    uint8_t modified = 0;
+    uint8_t key_index = 0;
 
-// select a row of matrix for read
-void select_row(uint8_t row)
-{
-    switch (row) {
-        case 0:
-            DDRD  = (1<<0);
-            PORTD = 0x00;
-            DDRC  = 0x00;
-            PORTC = 0x00;
-            DDRF  = 0x00;
-            PORTF = 0x00;
-            break;
-        case 1:
-            DDRD  = (1<<1);
-            PORTD = 0x00;
-            DDRC  = 0x00;
-            PORTC = 0x00;
-            DDRF  = 0x00;
-            PORTF = 0x00;
-            break;
-        case 2:
-            DDRD  = (1<<2);
-            PORTD = 0x00;
-            DDRC  = 0x00;
-            PORTC = 0x00;
-            DDRF  = 0x00;
-            PORTF = 0x00;
-            break;
-        case 3:
-            DDRD  = (1<<3);
-            PORTD = 0x00;
-            DDRC  = 0x00;
-            PORTC = 0x00;
-            DDRF  = 0x00;
-            PORTF = 0x00;
-            break;
-        case 4:
-            DDRD  = (1<<6);
-            PORTD = 0x00;
-            DDRC  = 0x00;
-            PORTC = 0x00;
-            DDRF  = 0x00;
-            PORTF = 0x00;
-            break;
-        case 5:
-            DDRD  = (1<<7);
-            PORTD = 0x00;
-            DDRC  = 0x00;
-            PORTC = 0x00;
-            DDRF  = 0x00;
-            PORTF = 0x00;
-            break;
-        case 6:
-            DDRD  = 0x00;
-            PORTD = 0x00;
-            DDRC  = (1<<6);
-            PORTC = 0x00;
-            DDRF  = 0x00;
-            PORTF = 0x00;
-            break;
-        case 7:
-            DDRD  = 0x00;
-            PORTD = 0x00;
-            DDRC  = (1<<7);
-            PORTC = 0x00;
-            DDRF  = 0x00;
-            PORTF = 0x00;
-            break;
-        case 8:
-            DDRD  = 0x00;
-            PORTD = 0x00;
-            DDRC  = 0x00;
-            PORTC = 0x00;
-            DDRF  = (1<<7);
-            PORTF = 0x00;
-            break;
-    }
-}
+    // set for 16 MHz clock
+    CPU_PRESCALE(0);
 
-uint8_t read_col(void)
-{
-    return PINB;
-}
+    matrix_init();
 
-int main(void)
-{
-	uint8_t i, reset_idle;
-	uint8_t prev_state[MAX_ROW];
-        for (int i=0; i < MAX_ROW; i++) prev_state[i] = 0xFF;
-
-	// set for 16 MHz clock
-	CPU_PRESCALE(0);
-
-        port_setup();
-
-
-	// Initialize the USB, and then wait for the host to set configuration.
-	// If the Teensy is powered without a PC connected to the USB port,
-	// this will wait forever.
-	usb_init();
-	while (!usb_configured()) /* wait */ ;
-
-	// Wait an extra second for the PC's operating system to load drivers
-	// and do whatever it does to actually be ready for input
-	_delay_ms(1000);
-
-	// Configure timer 0 to generate a timer overflow interrupt every
-	// 256*1024 clock cycles, or approx 61 Hz when using 16 MHz clock
-	// This demonstrates how to use interrupts to implement a simple
-	// inactivity timeout.
-	TCCR0A = 0x00;
-	TCCR0B = 0x05;
-	TIMSK0 = (1<<TOIE0);
-
-	print("Begin keyboard example program\n");
-	print("All Port B or Port D pins are inputs with pullup resistors.\n");
-	print("Any connection to ground on Port B or D pins will result in\n");
-	print("keystrokes sent to the PC (and debug messages here).\n");
-
-        uint8_t col;
-        uint8_t code;
-	while (1) {
-            reset_idle = 0;
-
-            for (uint8_t r=0; r < MAX_ROW; r++) {
-                select_row(r);
-
-                // without this read unstable value.
-                _delay_us(30);
-
-                col = read_col();
-                if (col != prev_state[r]) {
-                    prev_state[r] = col;
-                    phex(r);
-                    print(": ");
-                    pbin(col);
-                    print("\n");
-
-                    for (int c = 0; c < 8; c++) {
-                        if (col & 1<<c) continue;
-                        code = get_keycode(r, c);
-                        phex(code);
-                        print("\n");
-                        usb_keyboard_press(code, 0);
-                    }
 
-                    reset_idle = 1;
+    // Initialize the USB, and then wait for the host to set configuration.
+    // If the Teensy is powered without a PC connected to the USB port,
+    // this will wait forever.
+    usb_init();
+    while (!usb_configured()) /* wait */ ;
+
+    // Wait an extra second for the PC's operating system to load drivers
+    // and do whatever it does to actually be ready for input
+    _delay_ms(1000);
+
+    // Configure timer 0 to generate a timer overflow interrupt every
+    // 256*1024 clock cycles, or approx 61 Hz when using 16 MHz clock
+    // This demonstrates how to use interrupts to implement a simple
+    // inactivity timeout.
+    TCCR0A = 0x00;
+    TCCR0B = 0x05;
+    TIMSK0 = (1<<TOIE0);
+
+    print("keyboard firmware 0.1 for t.m.k.\n");
+
+    while (1) {
+        uint8_t row, col, code;
+
+        modified = 0;
+
+        matrix_scan();
+
+        keyboard_modifier_keys = 0;
+        for (int i = 0; i < 6; i++)
+            keyboard_keys[i] = KB_NO;
+        key_index = 0;
+
+        for (row = 0; row < MATRIX_ROWS; row++) {
+            if (matrix[row] != prev_matrix[row]) {
+                modified = 1;
+            }
+
+            for (col = 0; col < MATRIX_COLS; col++) {
+                if (matrix[row] & 1<<col) continue;
+                code = get_keycode(row, col);
+                
+                // Modifier keycode: 0xE0-0xE7
+                if (KB_LCTRL <= code && code <= KB_RGUI) {
+                    keyboard_modifier_keys |= 1<<(code&0x07);
+                } else {
+                    if (key_index < 6) {
+                        keyboard_keys[key_index] = code;
+                    }
+                    key_index++;
                 }
+
             }
+        }
+
+        if (key_index > 6) {
+            //Rollover
+        }
                 
 
 
-		// if any keypresses were detected, reset the idle counter
-		if (reset_idle) {
-			// variables shared with interrupt routines must be
-			// accessed carefully so the interrupt routine doesn't
-			// try to use the variable in the middle of our access
-			cli();
-			idle_count = 0;
-			sei();
-		}
-
-		// now the current pins will be the previous, and
-		// wait a short delay so we're not highly sensitive
-		// to mechanical "bounce".
-		_delay_ms(2);
-	}
+        // if any keypresses were detected, reset the idle counter
+        if (modified) {
+            print("    01234567\n");
+            for (row = 0; row < MATRIX_ROWS; row++) {
+                phex(row); print(": "); pbin_reverse(matrix[row]); print("\n");
+            }
+            print("keys: ");
+            for (int i = 0; i < 6; i++) { phex(keyboard_keys[i]); print(" "); }
+            print("\n");
+            print("mod: "); phex(keyboard_modifier_keys); print("\n");
+            usb_keyboard_send();
+
+            // variables shared with interrupt routines must be
+            // accessed carefully so the interrupt routine doesn't
+            // try to use the variable in the middle of our access
+            cli();
+            idle_count = 0;
+            sei();
+        }
+
+        // now the current pins will be the previous, and
+        // wait a short delay so we're not highly sensitive
+        // to mechanical "bounce".
+        _delay_ms(2);
+    }
 }
 
 // This interrupt routine is run approx 61 times per second.
@@ -240,12 +147,10 @@ int main(void)
 // hid_listen debug message window.
 ISR(TIMER0_OVF_vect)
 {
-	idle_count++;
-	if (idle_count > 61 * 8) {
-		idle_count = 0;
-		print("Timer Event :)\n");
-		//usb_keyboard_press(KEY_SPACE, 0);
-	}
+    idle_count++;
+    if (idle_count > 61 * 8) {
+        idle_count = 0;
+        //print("Timer Event :)\n");
+        //usb_keyboard_press(KEY_SPACE, 0);
+    }
 }
-
-