Massdrop keyboard support (#3780)

* Massdrop SAMD51

Massdrop SAMD51 keyboards initial project upload

* Removing relocated files

Removing files that were relocated and not deleted from previous location

* LED queue fix and cleaning

Cleaned some white space or comments.
Fix for LED I2C command queue.
Cleaned up interrupts.
Added debug function for printing numbers to scope through m15 line.

* Factory programmed serial usage

Ability to use factory programmed serial in hub and keyboard usb descriptors

* USB serial number and bugfix

Added support for factory programmed serial and usage.
Incorporated bootloader's conditional compiling to align project closer.
Fixed issue when USB device attempted to send before enabled.
General white space and comment cleanup.

* Project cleanup

Cleaned up project in terms of white space, commented code, and unecessary files.
NKRO keyboard is now using correct setreport although KBD was fine to use.
Fixed broken linkage to __xprintf for serial debug statements.

* Fix for extra keys

Fixed possible USB hang on extra keys report set missing

* I2C cleanup

I2C cleanup and file renames necessary for master branch merge

* Boot tracing and clocks cleanup

Added optional boot debug trace mode through debug LED codes.
General clock code cleanup.

* Relocate ARM/Atmel headers

Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes.

* Pull request changes

Pull request changes

* Keymap and compile flag fix

Keymap fix for momentary layer.
Potential compile flag fix for Travis CI failure.

* va_list include fix

Fix for va_list compile failure

* Include file case fixes

Fixes for include files with incorrect case

* ctrl and alt67 keyboard readme

Added ctrl and alt67 keyboard readme files

1 files changed, 1777 insertions, 0 deletions

diff --git a/lib/arm_atsam/packs/atmel/SAMD51_DFP/1.0.70/include/component/usb.h b/lib/arm_atsam/packs/atmel/SAMD51_DFP/1.0.70/include/component/usb.h
new file mode 100644
index 0000000000..1c56e1dd02
--- /dev/null
+++ b/lib/arm_atsam/packs/atmel/SAMD51_DFP/1.0.70/include/component/usb.h
@@ -0,0 +1,1777 @@
+/**
+ * \file
+ *
+ * \brief Component description for USB
+ *
+ * Copyright (c) 2017 Microchip Technology Inc.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the Licence at
+ * 
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * 
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef _SAMD51_USB_COMPONENT_
+#define _SAMD51_USB_COMPONENT_
+
+/* ========================================================================== */
+/**  SOFTWARE API DEFINITION FOR USB */
+/* ========================================================================== */
+/** \addtogroup SAMD51_USB Universal Serial Bus */
+/*@{*/
+
+#define USB_U2222
+#define REV_USB                     0x120
+
+/* -------- USB_CTRLA : (USB Offset: 0x000) (R/W  8) Control A -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint8_t  SWRST:1;          /*!< bit:      0  Software Reset                     */
+    uint8_t  ENABLE:1;         /*!< bit:      1  Enable                             */
+    uint8_t  RUNSTDBY:1;       /*!< bit:      2  Run in Standby Mode                */
+    uint8_t  :4;               /*!< bit:  3.. 6  Reserved                           */
+    uint8_t  MODE:1;           /*!< bit:      7  Operating Mode                     */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint8_t reg;                 /*!< Type      used for register access              */
+} USB_CTRLA_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_CTRLA_OFFSET            0x000        /**< \brief (USB_CTRLA offset) Control A */
+#define USB_CTRLA_RESETVALUE        _U_(0x00)    /**< \brief (USB_CTRLA reset_value) Control A */
+
+#define USB_CTRLA_SWRST_Pos         0            /**< \brief (USB_CTRLA) Software Reset */
+#define USB_CTRLA_SWRST             (_U_(0x1) << USB_CTRLA_SWRST_Pos)
+#define USB_CTRLA_ENABLE_Pos        1            /**< \brief (USB_CTRLA) Enable */
+#define USB_CTRLA_ENABLE            (_U_(0x1) << USB_CTRLA_ENABLE_Pos)
+#define USB_CTRLA_RUNSTDBY_Pos      2            /**< \brief (USB_CTRLA) Run in Standby Mode */
+#define USB_CTRLA_RUNSTDBY          (_U_(0x1) << USB_CTRLA_RUNSTDBY_Pos)
+#define USB_CTRLA_MODE_Pos          7            /**< \brief (USB_CTRLA) Operating Mode */
+#define USB_CTRLA_MODE              (_U_(0x1) << USB_CTRLA_MODE_Pos)
+#define   USB_CTRLA_MODE_DEVICE_Val       _U_(0x0)   /**< \brief (USB_CTRLA) Device Mode */
+#define   USB_CTRLA_MODE_HOST_Val         _U_(0x1)   /**< \brief (USB_CTRLA) Host Mode */
+#define USB_CTRLA_MODE_DEVICE       (USB_CTRLA_MODE_DEVICE_Val     << USB_CTRLA_MODE_Pos)
+#define USB_CTRLA_MODE_HOST         (USB_CTRLA_MODE_HOST_Val       << USB_CTRLA_MODE_Pos)
+#define USB_CTRLA_MASK              _U_(0x87)    /**< \brief (USB_CTRLA) MASK Register */
+
+/* -------- USB_SYNCBUSY : (USB Offset: 0x002) (R/   8) Synchronization Busy -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint8_t  SWRST:1;          /*!< bit:      0  Software Reset Synchronization Busy */
+    uint8_t  ENABLE:1;         /*!< bit:      1  Enable Synchronization Busy        */
+    uint8_t  :6;               /*!< bit:  2.. 7  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint8_t reg;                 /*!< Type      used for register access              */
+} USB_SYNCBUSY_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_SYNCBUSY_OFFSET         0x002        /**< \brief (USB_SYNCBUSY offset) Synchronization Busy */
+#define USB_SYNCBUSY_RESETVALUE     _U_(0x00)    /**< \brief (USB_SYNCBUSY reset_value) Synchronization Busy */
+
+#define USB_SYNCBUSY_SWRST_Pos      0            /**< \brief (USB_SYNCBUSY) Software Reset Synchronization Busy */
+#define USB_SYNCBUSY_SWRST          (_U_(0x1) << USB_SYNCBUSY_SWRST_Pos)
+#define USB_SYNCBUSY_ENABLE_Pos     1            /**< \brief (USB_SYNCBUSY) Enable Synchronization Busy */
+#define USB_SYNCBUSY_ENABLE         (_U_(0x1) << USB_SYNCBUSY_ENABLE_Pos)
+#define USB_SYNCBUSY_MASK           _U_(0x03)    /**< \brief (USB_SYNCBUSY) MASK Register */
+
+/* -------- USB_QOSCTRL : (USB Offset: 0x003) (R/W  8) USB Quality Of Service -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint8_t  CQOS:2;           /*!< bit:  0.. 1  Configuration Quality of Service   */
+    uint8_t  DQOS:2;           /*!< bit:  2.. 3  Data Quality of Service            */
+    uint8_t  :4;               /*!< bit:  4.. 7  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint8_t reg;                 /*!< Type      used for register access              */
+} USB_QOSCTRL_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_QOSCTRL_OFFSET          0x003        /**< \brief (USB_QOSCTRL offset) USB Quality Of Service */
+#define USB_QOSCTRL_RESETVALUE      _U_(0x0F)    /**< \brief (USB_QOSCTRL reset_value) USB Quality Of Service */
+
+#define USB_QOSCTRL_CQOS_Pos        0            /**< \brief (USB_QOSCTRL) Configuration Quality of Service */
+#define USB_QOSCTRL_CQOS_Msk        (_U_(0x3) << USB_QOSCTRL_CQOS_Pos)
+#define USB_QOSCTRL_CQOS(value)     (USB_QOSCTRL_CQOS_Msk & ((value) << USB_QOSCTRL_CQOS_Pos))
+#define USB_QOSCTRL_DQOS_Pos        2            /**< \brief (USB_QOSCTRL) Data Quality of Service */
+#define USB_QOSCTRL_DQOS_Msk        (_U_(0x3) << USB_QOSCTRL_DQOS_Pos)
+#define USB_QOSCTRL_DQOS(value)     (USB_QOSCTRL_DQOS_Msk & ((value) << USB_QOSCTRL_DQOS_Pos))
+#define USB_QOSCTRL_MASK            _U_(0x0F)    /**< \brief (USB_QOSCTRL) MASK Register */
+
+/* -------- USB_DEVICE_CTRLB : (USB Offset: 0x008) (R/W 16) DEVICE DEVICE Control B -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint16_t DETACH:1;         /*!< bit:      0  Detach                             */
+    uint16_t UPRSM:1;          /*!< bit:      1  Upstream Resume                    */
+    uint16_t SPDCONF:2;        /*!< bit:  2.. 3  Speed Configuration                */
+    uint16_t NREPLY:1;         /*!< bit:      4  No Reply                           */
+    uint16_t TSTJ:1;           /*!< bit:      5  Test mode J                        */
+    uint16_t TSTK:1;           /*!< bit:      6  Test mode K                        */
+    uint16_t TSTPCKT:1;        /*!< bit:      7  Test packet mode                   */
+    uint16_t OPMODE2:1;        /*!< bit:      8  Specific Operational Mode          */
+    uint16_t GNAK:1;           /*!< bit:      9  Global NAK                         */
+    uint16_t LPMHDSK:2;        /*!< bit: 10..11  Link Power Management Handshake    */
+    uint16_t :4;               /*!< bit: 12..15  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint16_t reg;                /*!< Type      used for register access              */
+} USB_DEVICE_CTRLB_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_CTRLB_OFFSET     0x008        /**< \brief (USB_DEVICE_CTRLB offset) DEVICE Control B */
+#define USB_DEVICE_CTRLB_RESETVALUE _U_(0x0001)  /**< \brief (USB_DEVICE_CTRLB reset_value) DEVICE Control B */
+
+#define USB_DEVICE_CTRLB_DETACH_Pos 0            /**< \brief (USB_DEVICE_CTRLB) Detach */
+#define USB_DEVICE_CTRLB_DETACH     (_U_(0x1) << USB_DEVICE_CTRLB_DETACH_Pos)
+#define USB_DEVICE_CTRLB_UPRSM_Pos  1            /**< \brief (USB_DEVICE_CTRLB) Upstream Resume */
+#define USB_DEVICE_CTRLB_UPRSM      (_U_(0x1) << USB_DEVICE_CTRLB_UPRSM_Pos)
+#define USB_DEVICE_CTRLB_SPDCONF_Pos 2            /**< \brief (USB_DEVICE_CTRLB) Speed Configuration */
+#define USB_DEVICE_CTRLB_SPDCONF_Msk (_U_(0x3) << USB_DEVICE_CTRLB_SPDCONF_Pos)
+#define USB_DEVICE_CTRLB_SPDCONF(value) (USB_DEVICE_CTRLB_SPDCONF_Msk & ((value) << USB_DEVICE_CTRLB_SPDCONF_Pos))
+#define   USB_DEVICE_CTRLB_SPDCONF_FS_Val _U_(0x0)   /**< \brief (USB_DEVICE_CTRLB) FS : Full Speed */
+#define   USB_DEVICE_CTRLB_SPDCONF_LS_Val _U_(0x1)   /**< \brief (USB_DEVICE_CTRLB) LS : Low Speed */
+#define   USB_DEVICE_CTRLB_SPDCONF_HS_Val _U_(0x2)   /**< \brief (USB_DEVICE_CTRLB) HS : High Speed capable */
+#define   USB_DEVICE_CTRLB_SPDCONF_HSTM_Val _U_(0x3)   /**< \brief (USB_DEVICE_CTRLB) HSTM: High Speed Test Mode (force high-speed mode for test mode) */
+#define USB_DEVICE_CTRLB_SPDCONF_FS (USB_DEVICE_CTRLB_SPDCONF_FS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
+#define USB_DEVICE_CTRLB_SPDCONF_LS (USB_DEVICE_CTRLB_SPDCONF_LS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
+#define USB_DEVICE_CTRLB_SPDCONF_HS (USB_DEVICE_CTRLB_SPDCONF_HS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
+#define USB_DEVICE_CTRLB_SPDCONF_HSTM (USB_DEVICE_CTRLB_SPDCONF_HSTM_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
+#define USB_DEVICE_CTRLB_NREPLY_Pos 4            /**< \brief (USB_DEVICE_CTRLB) No Reply */
+#define USB_DEVICE_CTRLB_NREPLY     (_U_(0x1) << USB_DEVICE_CTRLB_NREPLY_Pos)
+#define USB_DEVICE_CTRLB_TSTJ_Pos   5            /**< \brief (USB_DEVICE_CTRLB) Test mode J */
+#define USB_DEVICE_CTRLB_TSTJ       (_U_(0x1) << USB_DEVICE_CTRLB_TSTJ_Pos)
+#define USB_DEVICE_CTRLB_TSTK_Pos   6            /**< \brief (USB_DEVICE_CTRLB) Test mode K */
+#define USB_DEVICE_CTRLB_TSTK       (_U_(0x1) << USB_DEVICE_CTRLB_TSTK_Pos)
+#define USB_DEVICE_CTRLB_TSTPCKT_Pos 7            /**< \brief (USB_DEVICE_CTRLB) Test packet mode */
+#define USB_DEVICE_CTRLB_TSTPCKT    (_U_(0x1) << USB_DEVICE_CTRLB_TSTPCKT_Pos)
+#define USB_DEVICE_CTRLB_OPMODE2_Pos 8            /**< \brief (USB_DEVICE_CTRLB) Specific Operational Mode */
+#define USB_DEVICE_CTRLB_OPMODE2    (_U_(0x1) << USB_DEVICE_CTRLB_OPMODE2_Pos)
+#define USB_DEVICE_CTRLB_GNAK_Pos   9            /**< \brief (USB_DEVICE_CTRLB) Global NAK */
+#define USB_DEVICE_CTRLB_GNAK       (_U_(0x1) << USB_DEVICE_CTRLB_GNAK_Pos)
+#define USB_DEVICE_CTRLB_LPMHDSK_Pos 10           /**< \brief (USB_DEVICE_CTRLB) Link Power Management Handshake */
+#define USB_DEVICE_CTRLB_LPMHDSK_Msk (_U_(0x3) << USB_DEVICE_CTRLB_LPMHDSK_Pos)
+#define USB_DEVICE_CTRLB_LPMHDSK(value) (USB_DEVICE_CTRLB_LPMHDSK_Msk & ((value) << USB_DEVICE_CTRLB_LPMHDSK_Pos))
+#define   USB_DEVICE_CTRLB_LPMHDSK_NO_Val _U_(0x0)   /**< \brief (USB_DEVICE_CTRLB) No handshake. LPM is not supported */
+#define   USB_DEVICE_CTRLB_LPMHDSK_ACK_Val _U_(0x1)   /**< \brief (USB_DEVICE_CTRLB) ACK */
+#define   USB_DEVICE_CTRLB_LPMHDSK_NYET_Val _U_(0x2)   /**< \brief (USB_DEVICE_CTRLB) NYET */
+#define   USB_DEVICE_CTRLB_LPMHDSK_STALL_Val _U_(0x3)   /**< \brief (USB_DEVICE_CTRLB) STALL */
+#define USB_DEVICE_CTRLB_LPMHDSK_NO (USB_DEVICE_CTRLB_LPMHDSK_NO_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
+#define USB_DEVICE_CTRLB_LPMHDSK_ACK (USB_DEVICE_CTRLB_LPMHDSK_ACK_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
+#define USB_DEVICE_CTRLB_LPMHDSK_NYET (USB_DEVICE_CTRLB_LPMHDSK_NYET_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
+#define USB_DEVICE_CTRLB_LPMHDSK_STALL (USB_DEVICE_CTRLB_LPMHDSK_STALL_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
+#define USB_DEVICE_CTRLB_MASK       _U_(0x0FFF)  /**< \brief (USB_DEVICE_CTRLB) MASK Register */
+
+/* -------- USB_HOST_CTRLB : (USB Offset: 0x008) (R/W 16) HOST HOST Control B -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint16_t :1;               /*!< bit:      0  Reserved                           */
+    uint16_t RESUME:1;         /*!< bit:      1  Send USB Resume                    */
+    uint16_t SPDCONF:2;        /*!< bit:  2.. 3  Speed Configuration for Host       */
+    uint16_t AUTORESUME:1;     /*!< bit:      4  Auto Resume Enable                 */
+    uint16_t TSTJ:1;           /*!< bit:      5  Test mode J                        */
+    uint16_t TSTK:1;           /*!< bit:      6  Test mode K                        */
+    uint16_t :1;               /*!< bit:      7  Reserved                           */
+    uint16_t SOFE:1;           /*!< bit:      8  Start of Frame Generation Enable   */
+    uint16_t BUSRESET:1;       /*!< bit:      9  Send USB Reset                     */
+    uint16_t VBUSOK:1;         /*!< bit:     10  VBUS is OK                         */
+    uint16_t L1RESUME:1;       /*!< bit:     11  Send L1 Resume                     */
+    uint16_t :4;               /*!< bit: 12..15  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint16_t reg;                /*!< Type      used for register access              */
+} USB_HOST_CTRLB_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_CTRLB_OFFSET       0x008        /**< \brief (USB_HOST_CTRLB offset) HOST Control B */
+#define USB_HOST_CTRLB_RESETVALUE   _U_(0x0000)  /**< \brief (USB_HOST_CTRLB reset_value) HOST Control B */
+
+#define USB_HOST_CTRLB_RESUME_Pos   1            /**< \brief (USB_HOST_CTRLB) Send USB Resume */
+#define USB_HOST_CTRLB_RESUME       (_U_(0x1) << USB_HOST_CTRLB_RESUME_Pos)
+#define USB_HOST_CTRLB_SPDCONF_Pos  2            /**< \brief (USB_HOST_CTRLB) Speed Configuration for Host */
+#define USB_HOST_CTRLB_SPDCONF_Msk  (_U_(0x3) << USB_HOST_CTRLB_SPDCONF_Pos)
+#define USB_HOST_CTRLB_SPDCONF(value) (USB_HOST_CTRLB_SPDCONF_Msk & ((value) << USB_HOST_CTRLB_SPDCONF_Pos))
+#define   USB_HOST_CTRLB_SPDCONF_NORMAL_Val _U_(0x0)   /**< \brief (USB_HOST_CTRLB) Normal mode: the host starts in full-speed mode and performs a high-speed reset to switch to the high speed mode if the downstream peripheral is high-speed capable. */
+#define   USB_HOST_CTRLB_SPDCONF_FS_Val   _U_(0x3)   /**< \brief (USB_HOST_CTRLB) Full-speed: the host remains in full-speed mode whatever is the peripheral speed capability. Relevant in UTMI mode only. */
+#define USB_HOST_CTRLB_SPDCONF_NORMAL (USB_HOST_CTRLB_SPDCONF_NORMAL_Val << USB_HOST_CTRLB_SPDCONF_Pos)
+#define USB_HOST_CTRLB_SPDCONF_FS   (USB_HOST_CTRLB_SPDCONF_FS_Val << USB_HOST_CTRLB_SPDCONF_Pos)
+#define USB_HOST_CTRLB_AUTORESUME_Pos 4            /**< \brief (USB_HOST_CTRLB) Auto Resume Enable */
+#define USB_HOST_CTRLB_AUTORESUME   (_U_(0x1) << USB_HOST_CTRLB_AUTORESUME_Pos)
+#define USB_HOST_CTRLB_TSTJ_Pos     5            /**< \brief (USB_HOST_CTRLB) Test mode J */
+#define USB_HOST_CTRLB_TSTJ         (_U_(0x1) << USB_HOST_CTRLB_TSTJ_Pos)
+#define USB_HOST_CTRLB_TSTK_Pos     6            /**< \brief (USB_HOST_CTRLB) Test mode K */
+#define USB_HOST_CTRLB_TSTK         (_U_(0x1) << USB_HOST_CTRLB_TSTK_Pos)
+#define USB_HOST_CTRLB_SOFE_Pos     8            /**< \brief (USB_HOST_CTRLB) Start of Frame Generation Enable */
+#define USB_HOST_CTRLB_SOFE         (_U_(0x1) << USB_HOST_CTRLB_SOFE_Pos)
+#define USB_HOST_CTRLB_BUSRESET_Pos 9            /**< \brief (USB_HOST_CTRLB) Send USB Reset */
+#define USB_HOST_CTRLB_BUSRESET     (_U_(0x1) << USB_HOST_CTRLB_BUSRESET_Pos)
+#define USB_HOST_CTRLB_VBUSOK_Pos   10           /**< \brief (USB_HOST_CTRLB) VBUS is OK */
+#define USB_HOST_CTRLB_VBUSOK       (_U_(0x1) << USB_HOST_CTRLB_VBUSOK_Pos)
+#define USB_HOST_CTRLB_L1RESUME_Pos 11           /**< \brief (USB_HOST_CTRLB) Send L1 Resume */
+#define USB_HOST_CTRLB_L1RESUME     (_U_(0x1) << USB_HOST_CTRLB_L1RESUME_Pos)
+#define USB_HOST_CTRLB_MASK         _U_(0x0F7E)  /**< \brief (USB_HOST_CTRLB) MASK Register */
+
+/* -------- USB_DEVICE_DADD : (USB Offset: 0x00A) (R/W  8) DEVICE DEVICE Device Address -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint8_t  DADD:7;           /*!< bit:  0.. 6  Device Address                     */
+    uint8_t  ADDEN:1;          /*!< bit:      7  Device Address Enable              */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint8_t reg;                 /*!< Type      used for register access              */
+} USB_DEVICE_DADD_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_DADD_OFFSET      0x00A        /**< \brief (USB_DEVICE_DADD offset) DEVICE Device Address */
+#define USB_DEVICE_DADD_RESETVALUE  _U_(0x00)    /**< \brief (USB_DEVICE_DADD reset_value) DEVICE Device Address */
+
+#define USB_DEVICE_DADD_DADD_Pos    0            /**< \brief (USB_DEVICE_DADD) Device Address */
+#define USB_DEVICE_DADD_DADD_Msk    (_U_(0x7F) << USB_DEVICE_DADD_DADD_Pos)
+#define USB_DEVICE_DADD_DADD(value) (USB_DEVICE_DADD_DADD_Msk & ((value) << USB_DEVICE_DADD_DADD_Pos))
+#define USB_DEVICE_DADD_ADDEN_Pos   7            /**< \brief (USB_DEVICE_DADD) Device Address Enable */
+#define USB_DEVICE_DADD_ADDEN       (_U_(0x1) << USB_DEVICE_DADD_ADDEN_Pos)
+#define USB_DEVICE_DADD_MASK        _U_(0xFF)    /**< \brief (USB_DEVICE_DADD) MASK Register */
+
+/* -------- USB_HOST_HSOFC : (USB Offset: 0x00A) (R/W  8) HOST HOST Host Start Of Frame Control -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint8_t  FLENC:4;          /*!< bit:  0.. 3  Frame Length Control               */
+    uint8_t  :3;               /*!< bit:  4.. 6  Reserved                           */
+    uint8_t  FLENCE:1;         /*!< bit:      7  Frame Length Control Enable        */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint8_t reg;                 /*!< Type      used for register access              */
+} USB_HOST_HSOFC_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_HSOFC_OFFSET       0x00A        /**< \brief (USB_HOST_HSOFC offset) HOST Host Start Of Frame Control */
+#define USB_HOST_HSOFC_RESETVALUE   _U_(0x00)    /**< \brief (USB_HOST_HSOFC reset_value) HOST Host Start Of Frame Control */
+
+#define USB_HOST_HSOFC_FLENC_Pos    0            /**< \brief (USB_HOST_HSOFC) Frame Length Control */
+#define USB_HOST_HSOFC_FLENC_Msk    (_U_(0xF) << USB_HOST_HSOFC_FLENC_Pos)
+#define USB_HOST_HSOFC_FLENC(value) (USB_HOST_HSOFC_FLENC_Msk & ((value) << USB_HOST_HSOFC_FLENC_Pos))
+#define USB_HOST_HSOFC_FLENCE_Pos   7            /**< \brief (USB_HOST_HSOFC) Frame Length Control Enable */
+#define USB_HOST_HSOFC_FLENCE       (_U_(0x1) << USB_HOST_HSOFC_FLENCE_Pos)
+#define USB_HOST_HSOFC_MASK         _U_(0x8F)    /**< \brief (USB_HOST_HSOFC) MASK Register */
+
+/* -------- USB_DEVICE_STATUS : (USB Offset: 0x00C) (R/   8) DEVICE DEVICE Status -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint8_t  :2;               /*!< bit:  0.. 1  Reserved                           */
+    uint8_t  SPEED:2;          /*!< bit:  2.. 3  Speed Status                       */
+    uint8_t  :2;               /*!< bit:  4.. 5  Reserved                           */
+    uint8_t  LINESTATE:2;      /*!< bit:  6.. 7  USB Line State Status              */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint8_t reg;                 /*!< Type      used for register access              */
+} USB_DEVICE_STATUS_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_STATUS_OFFSET    0x00C        /**< \brief (USB_DEVICE_STATUS offset) DEVICE Status */
+#define USB_DEVICE_STATUS_RESETVALUE _U_(0x40)    /**< \brief (USB_DEVICE_STATUS reset_value) DEVICE Status */
+
+#define USB_DEVICE_STATUS_SPEED_Pos 2            /**< \brief (USB_DEVICE_STATUS) Speed Status */
+#define USB_DEVICE_STATUS_SPEED_Msk (_U_(0x3) << USB_DEVICE_STATUS_SPEED_Pos)
+#define USB_DEVICE_STATUS_SPEED(value) (USB_DEVICE_STATUS_SPEED_Msk & ((value) << USB_DEVICE_STATUS_SPEED_Pos))
+#define   USB_DEVICE_STATUS_SPEED_FS_Val  _U_(0x0)   /**< \brief (USB_DEVICE_STATUS) Full-speed mode */
+#define   USB_DEVICE_STATUS_SPEED_LS_Val  _U_(0x1)   /**< \brief (USB_DEVICE_STATUS) Low-speed mode */
+#define   USB_DEVICE_STATUS_SPEED_HS_Val  _U_(0x2)   /**< \brief (USB_DEVICE_STATUS) High-speed mode */
+#define USB_DEVICE_STATUS_SPEED_FS  (USB_DEVICE_STATUS_SPEED_FS_Val << USB_DEVICE_STATUS_SPEED_Pos)
+#define USB_DEVICE_STATUS_SPEED_LS  (USB_DEVICE_STATUS_SPEED_LS_Val << USB_DEVICE_STATUS_SPEED_Pos)
+#define USB_DEVICE_STATUS_SPEED_HS  (USB_DEVICE_STATUS_SPEED_HS_Val << USB_DEVICE_STATUS_SPEED_Pos)
+#define USB_DEVICE_STATUS_LINESTATE_Pos 6            /**< \brief (USB_DEVICE_STATUS) USB Line State Status */
+#define USB_DEVICE_STATUS_LINESTATE_Msk (_U_(0x3) << USB_DEVICE_STATUS_LINESTATE_Pos)
+#define USB_DEVICE_STATUS_LINESTATE(value) (USB_DEVICE_STATUS_LINESTATE_Msk & ((value) << USB_DEVICE_STATUS_LINESTATE_Pos))
+#define   USB_DEVICE_STATUS_LINESTATE_0_Val _U_(0x0)   /**< \brief (USB_DEVICE_STATUS) SE0/RESET */
+#define   USB_DEVICE_STATUS_LINESTATE_1_Val _U_(0x1)   /**< \brief (USB_DEVICE_STATUS) FS-J or LS-K State */
+#define   USB_DEVICE_STATUS_LINESTATE_2_Val _U_(0x2)   /**< \brief (USB_DEVICE_STATUS) FS-K or LS-J State */
+#define USB_DEVICE_STATUS_LINESTATE_0 (USB_DEVICE_STATUS_LINESTATE_0_Val << USB_DEVICE_STATUS_LINESTATE_Pos)
+#define USB_DEVICE_STATUS_LINESTATE_1 (USB_DEVICE_STATUS_LINESTATE_1_Val << USB_DEVICE_STATUS_LINESTATE_Pos)
+#define USB_DEVICE_STATUS_LINESTATE_2 (USB_DEVICE_STATUS_LINESTATE_2_Val << USB_DEVICE_STATUS_LINESTATE_Pos)
+#define USB_DEVICE_STATUS_MASK      _U_(0xCC)    /**< \brief (USB_DEVICE_STATUS) MASK Register */
+
+/* -------- USB_HOST_STATUS : (USB Offset: 0x00C) (R/W  8) HOST HOST Status -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint8_t  :2;               /*!< bit:  0.. 1  Reserved                           */
+    uint8_t  SPEED:2;          /*!< bit:  2.. 3  Speed Status                       */
+    uint8_t  :2;               /*!< bit:  4.. 5  Reserved                           */
+    uint8_t  LINESTATE:2;      /*!< bit:  6.. 7  USB Line State Status              */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint8_t reg;                 /*!< Type      used for register access              */
+} USB_HOST_STATUS_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_STATUS_OFFSET      0x00C        /**< \brief (USB_HOST_STATUS offset) HOST Status */
+#define USB_HOST_STATUS_RESETVALUE  _U_(0x00)    /**< \brief (USB_HOST_STATUS reset_value) HOST Status */
+
+#define USB_HOST_STATUS_SPEED_Pos   2            /**< \brief (USB_HOST_STATUS) Speed Status */
+#define USB_HOST_STATUS_SPEED_Msk   (_U_(0x3) << USB_HOST_STATUS_SPEED_Pos)
+#define USB_HOST_STATUS_SPEED(value) (USB_HOST_STATUS_SPEED_Msk & ((value) << USB_HOST_STATUS_SPEED_Pos))
+#define USB_HOST_STATUS_LINESTATE_Pos 6            /**< \brief (USB_HOST_STATUS) USB Line State Status */
+#define USB_HOST_STATUS_LINESTATE_Msk (_U_(0x3) << USB_HOST_STATUS_LINESTATE_Pos)
+#define USB_HOST_STATUS_LINESTATE(value) (USB_HOST_STATUS_LINESTATE_Msk & ((value) << USB_HOST_STATUS_LINESTATE_Pos))
+#define USB_HOST_STATUS_MASK        _U_(0xCC)    /**< \brief (USB_HOST_STATUS) MASK Register */
+
+/* -------- USB_FSMSTATUS : (USB Offset: 0x00D) (R/   8) Finite State Machine Status -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint8_t  FSMSTATE:7;       /*!< bit:  0.. 6  Fine State Machine Status          */
+    uint8_t  :1;               /*!< bit:      7  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint8_t reg;                 /*!< Type      used for register access              */
+} USB_FSMSTATUS_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_FSMSTATUS_OFFSET        0x00D        /**< \brief (USB_FSMSTATUS offset) Finite State Machine Status */
+#define USB_FSMSTATUS_RESETVALUE    _U_(0x01)    /**< \brief (USB_FSMSTATUS reset_value) Finite State Machine Status */
+
+#define USB_FSMSTATUS_FSMSTATE_Pos  0            /**< \brief (USB_FSMSTATUS) Fine State Machine Status */
+#define USB_FSMSTATUS_FSMSTATE_Msk  (_U_(0x7F) << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_FSMSTATE(value) (USB_FSMSTATUS_FSMSTATE_Msk & ((value) << USB_FSMSTATUS_FSMSTATE_Pos))
+#define   USB_FSMSTATUS_FSMSTATE_OFF_Val  _U_(0x1)   /**< \brief (USB_FSMSTATUS) OFF (L3). It corresponds to the powered-off, disconnected, and disabled state */
+#define   USB_FSMSTATUS_FSMSTATE_ON_Val   _U_(0x2)   /**< \brief (USB_FSMSTATUS) ON (L0). It corresponds to the Idle and Active states */
+#define   USB_FSMSTATUS_FSMSTATE_SUSPEND_Val _U_(0x4)   /**< \brief (USB_FSMSTATUS) SUSPEND (L2) */
+#define   USB_FSMSTATUS_FSMSTATE_SLEEP_Val _U_(0x8)   /**< \brief (USB_FSMSTATUS) SLEEP (L1) */
+#define   USB_FSMSTATUS_FSMSTATE_DNRESUME_Val _U_(0x10)   /**< \brief (USB_FSMSTATUS) DNRESUME. Down Stream Resume. */
+#define   USB_FSMSTATUS_FSMSTATE_UPRESUME_Val _U_(0x20)   /**< \brief (USB_FSMSTATUS) UPRESUME. Up Stream Resume. */
+#define   USB_FSMSTATUS_FSMSTATE_RESET_Val _U_(0x40)   /**< \brief (USB_FSMSTATUS) RESET. USB lines Reset. */
+#define USB_FSMSTATUS_FSMSTATE_OFF  (USB_FSMSTATUS_FSMSTATE_OFF_Val << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_FSMSTATE_ON   (USB_FSMSTATUS_FSMSTATE_ON_Val << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_FSMSTATE_SUSPEND (USB_FSMSTATUS_FSMSTATE_SUSPEND_Val << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_FSMSTATE_SLEEP (USB_FSMSTATUS_FSMSTATE_SLEEP_Val << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_FSMSTATE_DNRESUME (USB_FSMSTATUS_FSMSTATE_DNRESUME_Val << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_FSMSTATE_UPRESUME (USB_FSMSTATUS_FSMSTATE_UPRESUME_Val << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_FSMSTATE_RESET (USB_FSMSTATUS_FSMSTATE_RESET_Val << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_MASK          _U_(0x7F)    /**< \brief (USB_FSMSTATUS) MASK Register */
+
+/* -------- USB_DEVICE_FNUM : (USB Offset: 0x010) (R/  16) DEVICE DEVICE Device Frame Number -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint16_t MFNUM:3;          /*!< bit:  0.. 2  Micro Frame Number                 */
+    uint16_t FNUM:11;          /*!< bit:  3..13  Frame Number                       */
+    uint16_t :1;               /*!< bit:     14  Reserved                           */
+    uint16_t FNCERR:1;         /*!< bit:     15  Frame Number CRC Error             */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint16_t reg;                /*!< Type      used for register access              */
+} USB_DEVICE_FNUM_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_FNUM_OFFSET      0x010        /**< \brief (USB_DEVICE_FNUM offset) DEVICE Device Frame Number */
+#define USB_DEVICE_FNUM_RESETVALUE  _U_(0x0000)  /**< \brief (USB_DEVICE_FNUM reset_value) DEVICE Device Frame Number */
+
+#define USB_DEVICE_FNUM_MFNUM_Pos   0            /**< \brief (USB_DEVICE_FNUM) Micro Frame Number */
+#define USB_DEVICE_FNUM_MFNUM_Msk   (_U_(0x7) << USB_DEVICE_FNUM_MFNUM_Pos)
+#define USB_DEVICE_FNUM_MFNUM(value) (USB_DEVICE_FNUM_MFNUM_Msk & ((value) << USB_DEVICE_FNUM_MFNUM_Pos))
+#define USB_DEVICE_FNUM_FNUM_Pos    3            /**< \brief (USB_DEVICE_FNUM) Frame Number */
+#define USB_DEVICE_FNUM_FNUM_Msk    (_U_(0x7FF) << USB_DEVICE_FNUM_FNUM_Pos)
+#define USB_DEVICE_FNUM_FNUM(value) (USB_DEVICE_FNUM_FNUM_Msk & ((value) << USB_DEVICE_FNUM_FNUM_Pos))
+#define USB_DEVICE_FNUM_FNCERR_Pos  15           /**< \brief (USB_DEVICE_FNUM) Frame Number CRC Error */
+#define USB_DEVICE_FNUM_FNCERR      (_U_(0x1) << USB_DEVICE_FNUM_FNCERR_Pos)
+#define USB_DEVICE_FNUM_MASK        _U_(0xBFFF)  /**< \brief (USB_DEVICE_FNUM) MASK Register */
+
+/* -------- USB_HOST_FNUM : (USB Offset: 0x010) (R/W 16) HOST HOST Host Frame Number -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint16_t MFNUM:3;          /*!< bit:  0.. 2  Micro Frame Number                 */
+    uint16_t FNUM:11;          /*!< bit:  3..13  Frame Number                       */
+    uint16_t :2;               /*!< bit: 14..15  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint16_t reg;                /*!< Type      used for register access              */
+} USB_HOST_FNUM_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_FNUM_OFFSET        0x010        /**< \brief (USB_HOST_FNUM offset) HOST Host Frame Number */
+#define USB_HOST_FNUM_RESETVALUE    _U_(0x0000)  /**< \brief (USB_HOST_FNUM reset_value) HOST Host Frame Number */
+
+#define USB_HOST_FNUM_MFNUM_Pos     0            /**< \brief (USB_HOST_FNUM) Micro Frame Number */
+#define USB_HOST_FNUM_MFNUM_Msk     (_U_(0x7) << USB_HOST_FNUM_MFNUM_Pos)
+#define USB_HOST_FNUM_MFNUM(value)  (USB_HOST_FNUM_MFNUM_Msk & ((value) << USB_HOST_FNUM_MFNUM_Pos))
+#define USB_HOST_FNUM_FNUM_Pos      3            /**< \brief (USB_HOST_FNUM) Frame Number */
+#define USB_HOST_FNUM_FNUM_Msk      (_U_(0x7FF) << USB_HOST_FNUM_FNUM_Pos)
+#define USB_HOST_FNUM_FNUM(value)   (USB_HOST_FNUM_FNUM_Msk & ((value) << USB_HOST_FNUM_FNUM_Pos))
+#define USB_HOST_FNUM_MASK          _U_(0x3FFF)  /**< \brief (USB_HOST_FNUM) MASK Register */
+
+/* -------- USB_HOST_FLENHIGH : (USB Offset: 0x012) (R/   8) HOST HOST Host Frame Length -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint8_t  FLENHIGH:8;       /*!< bit:  0.. 7  Frame Length                       */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint8_t reg;                 /*!< Type      used for register access              */
+} USB_HOST_FLENHIGH_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_FLENHIGH_OFFSET    0x012        /**< \brief (USB_HOST_FLENHIGH offset) HOST Host Frame Length */
+#define USB_HOST_FLENHIGH_RESETVALUE _U_(0x00)    /**< \brief (USB_HOST_FLENHIGH reset_value) HOST Host Frame Length */
+
+#define USB_HOST_FLENHIGH_FLENHIGH_Pos 0            /**< \brief (USB_HOST_FLENHIGH) Frame Length */
+#define USB_HOST_FLENHIGH_FLENHIGH_Msk (_U_(0xFF) << USB_HOST_FLENHIGH_FLENHIGH_Pos)
+#define USB_HOST_FLENHIGH_FLENHIGH(value) (USB_HOST_FLENHIGH_FLENHIGH_Msk & ((value) << USB_HOST_FLENHIGH_FLENHIGH_Pos))
+#define USB_HOST_FLENHIGH_MASK      _U_(0xFF)    /**< \brief (USB_HOST_FLENHIGH) MASK Register */
+
+/* -------- USB_DEVICE_INTENCLR : (USB Offset: 0x014) (R/W 16) DEVICE DEVICE Device Interrupt Enable Clear -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint16_t SUSPEND:1;        /*!< bit:      0  Suspend Interrupt Enable           */
+    uint16_t MSOF:1;           /*!< bit:      1  Micro Start of Frame Interrupt Enable in High Speed Mode */
+    uint16_t SOF:1;            /*!< bit:      2  Start Of Frame Interrupt Enable    */
+    uint16_t EORST:1;          /*!< bit:      3  End of Reset Interrupt Enable      */
+    uint16_t WAKEUP:1;         /*!< bit:      4  Wake Up Interrupt Enable           */
+    uint16_t EORSM:1;          /*!< bit:      5  End Of Resume Interrupt Enable     */
+    uint16_t UPRSM:1;          /*!< bit:      6  Upstream Resume Interrupt Enable   */
+    uint16_t RAMACER:1;        /*!< bit:      7  Ram Access Interrupt Enable        */
+    uint16_t LPMNYET:1;        /*!< bit:      8  Link Power Management Not Yet Interrupt Enable */
+    uint16_t LPMSUSP:1;        /*!< bit:      9  Link Power Management Suspend Interrupt Enable */
+    uint16_t :6;               /*!< bit: 10..15  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint16_t reg;                /*!< Type      used for register access              */
+} USB_DEVICE_INTENCLR_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_INTENCLR_OFFSET  0x014        /**< \brief (USB_DEVICE_INTENCLR offset) DEVICE Device Interrupt Enable Clear */
+#define USB_DEVICE_INTENCLR_RESETVALUE _U_(0x0000)  /**< \brief (USB_DEVICE_INTENCLR reset_value) DEVICE Device Interrupt Enable Clear */
+
+#define USB_DEVICE_INTENCLR_SUSPEND_Pos 0            /**< \brief (USB_DEVICE_INTENCLR) Suspend Interrupt Enable */
+#define USB_DEVICE_INTENCLR_SUSPEND (_U_(0x1) << USB_DEVICE_INTENCLR_SUSPEND_Pos)
+#define USB_DEVICE_INTENCLR_MSOF_Pos 1            /**< \brief (USB_DEVICE_INTENCLR) Micro Start of Frame Interrupt Enable in High Speed Mode */
+#define USB_DEVICE_INTENCLR_MSOF    (_U_(0x1) << USB_DEVICE_INTENCLR_MSOF_Pos)
+#define USB_DEVICE_INTENCLR_SOF_Pos 2            /**< \brief (USB_DEVICE_INTENCLR) Start Of Frame Interrupt Enable */
+#define USB_DEVICE_INTENCLR_SOF     (_U_(0x1) << USB_DEVICE_INTENCLR_SOF_Pos)
+#define USB_DEVICE_INTENCLR_EORST_Pos 3            /**< \brief (USB_DEVICE_INTENCLR) End of Reset Interrupt Enable */
+#define USB_DEVICE_INTENCLR_EORST   (_U_(0x1) << USB_DEVICE_INTENCLR_EORST_Pos)
+#define USB_DEVICE_INTENCLR_WAKEUP_Pos 4            /**< \brief (USB_DEVICE_INTENCLR) Wake Up Interrupt Enable */
+#define USB_DEVICE_INTENCLR_WAKEUP  (_U_(0x1) << USB_DEVICE_INTENCLR_WAKEUP_Pos)
+#define USB_DEVICE_INTENCLR_EORSM_Pos 5            /**< \brief (USB_DEVICE_INTENCLR) End Of Resume Interrupt Enable */
+#define USB_DEVICE_INTENCLR_EORSM   (_U_(0x1) << USB_DEVICE_INTENCLR_EORSM_Pos)
+#define USB_DEVICE_INTENCLR_UPRSM_Pos 6            /**< \brief (USB_DEVICE_INTENCLR) Upstream Resume Interrupt Enable */
+#define USB_DEVICE_INTENCLR_UPRSM   (_U_(0x1) << USB_DEVICE_INTENCLR_UPRSM_Pos)
+#define USB_DEVICE_INTENCLR_RAMACER_Pos 7            /**< \brief (USB_DEVICE_INTENCLR) Ram Access Interrupt Enable */
+#define USB_DEVICE_INTENCLR_RAMACER (_U_(0x1) << USB_DEVICE_INTENCLR_RAMACER_Pos)
+#define USB_DEVICE_INTENCLR_LPMNYET_Pos 8            /**< \brief (USB_DEVICE_INTENCLR) Link Power Management Not Yet Interrupt Enable */
+#define USB_DEVICE_INTENCLR_LPMNYET (_U_(0x1) << USB_DEVICE_INTENCLR_LPMNYET_Pos)
+#define USB_DEVICE_INTENCLR_LPMSUSP_Pos 9            /**< \brief (USB_DEVICE_INTENCLR) Link Power Management Suspend Interrupt Enable */
+#define USB_DEVICE_INTENCLR_LPMSUSP (_U_(0x1) << USB_DEVICE_INTENCLR_LPMSUSP_Pos)
+#define USB_DEVICE_INTENCLR_MASK    _U_(0x03FF)  /**< \brief (USB_DEVICE_INTENCLR) MASK Register */
+
+/* -------- USB_HOST_INTENCLR : (USB Offset: 0x014) (R/W 16) HOST HOST Host Interrupt Enable Clear -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint16_t :2;               /*!< bit:  0.. 1  Reserved                           */
+    uint16_t HSOF:1;           /*!< bit:      2  Host Start Of Frame Interrupt Disable */
+    uint16_t RST:1;            /*!< bit:      3  BUS Reset Interrupt Disable        */
+    uint16_t WAKEUP:1;         /*!< bit:      4  Wake Up Interrupt Disable          */
+    uint16_t DNRSM:1;          /*!< bit:      5  DownStream to Device Interrupt Disable */
+    uint16_t UPRSM:1;          /*!< bit:      6  Upstream Resume from Device Interrupt Disable */
+    uint16_t RAMACER:1;        /*!< bit:      7  Ram Access Interrupt Disable       */
+    uint16_t DCONN:1;          /*!< bit:      8  Device Connection Interrupt Disable */
+    uint16_t DDISC:1;          /*!< bit:      9  Device Disconnection Interrupt Disable */
+    uint16_t :6;               /*!< bit: 10..15  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint16_t reg;                /*!< Type      used for register access              */
+} USB_HOST_INTENCLR_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_INTENCLR_OFFSET    0x014        /**< \brief (USB_HOST_INTENCLR offset) HOST Host Interrupt Enable Clear */
+#define USB_HOST_INTENCLR_RESETVALUE _U_(0x0000)  /**< \brief (USB_HOST_INTENCLR reset_value) HOST Host Interrupt Enable Clear */
+
+#define USB_HOST_INTENCLR_HSOF_Pos  2            /**< \brief (USB_HOST_INTENCLR) Host Start Of Frame Interrupt Disable */
+#define USB_HOST_INTENCLR_HSOF      (_U_(0x1) << USB_HOST_INTENCLR_HSOF_Pos)
+#define USB_HOST_INTENCLR_RST_Pos   3            /**< \brief (USB_HOST_INTENCLR) BUS Reset Interrupt Disable */
+#define USB_HOST_INTENCLR_RST       (_U_(0x1) << USB_HOST_INTENCLR_RST_Pos)
+#define USB_HOST_INTENCLR_WAKEUP_Pos 4            /**< \brief (USB_HOST_INTENCLR) Wake Up Interrupt Disable */
+#define USB_HOST_INTENCLR_WAKEUP    (_U_(0x1) << USB_HOST_INTENCLR_WAKEUP_Pos)
+#define USB_HOST_INTENCLR_DNRSM_Pos 5            /**< \brief (USB_HOST_INTENCLR) DownStream to Device Interrupt Disable */
+#define USB_HOST_INTENCLR_DNRSM     (_U_(0x1) << USB_HOST_INTENCLR_DNRSM_Pos)
+#define USB_HOST_INTENCLR_UPRSM_Pos 6            /**< \brief (USB_HOST_INTENCLR) Upstream Resume from Device Interrupt Disable */
+#define USB_HOST_INTENCLR_UPRSM     (_U_(0x1) << USB_HOST_INTENCLR_UPRSM_Pos)
+#define USB_HOST_INTENCLR_RAMACER_Pos 7            /**< \brief (USB_HOST_INTENCLR) Ram Access Interrupt Disable */
+#define USB_HOST_INTENCLR_RAMACER   (_U_(0x1) << USB_HOST_INTENCLR_RAMACER_Pos)
+#define USB_HOST_INTENCLR_DCONN_Pos 8            /**< \brief (USB_HOST_INTENCLR) Device Connection Interrupt Disable */
+#define USB_HOST_INTENCLR_DCONN     (_U_(0x1) << USB_HOST_INTENCLR_DCONN_Pos)
+#define USB_HOST_INTENCLR_DDISC_Pos 9            /**< \brief (USB_HOST_INTENCLR) Device Disconnection Interrupt Disable */
+#define USB_HOST_INTENCLR_DDISC     (_U_(0x1) << USB_HOST_INTENCLR_DDISC_Pos)
+#define USB_HOST_INTENCLR_MASK      _U_(0x03FC)  /**< \brief (USB_HOST_INTENCLR) MASK Register */
+
+/* -------- USB_DEVICE_INTENSET : (USB Offset: 0x018) (R/W 16) DEVICE DEVICE Device Interrupt Enable Set -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint16_t SUSPEND:1;        /*!< bit:      0  Suspend Interrupt Enable           */
+    uint16_t MSOF:1;           /*!< bit:      1  Micro Start of Frame Interrupt Enable in High Speed Mode */
+    uint16_t SOF:1;            /*!< bit:      2  Start Of Frame Interrupt Enable    */
+    uint16_t EORST:1;          /*!< bit:      3  End of Reset Interrupt Enable      */
+    uint16_t WAKEUP:1;         /*!< bit:      4  Wake Up Interrupt Enable           */
+    uint16_t EORSM:1;          /*!< bit:      5  End Of Resume Interrupt Enable     */
+    uint16_t UPRSM:1;          /*!< bit:      6  Upstream Resume Interrupt Enable   */
+    uint16_t RAMACER:1;        /*!< bit:      7  Ram Access Interrupt Enable        */
+    uint16_t LPMNYET:1;        /*!< bit:      8  Link Power Management Not Yet Interrupt Enable */
+    uint16_t LPMSUSP:1;        /*!< bit:      9  Link Power Management Suspend Interrupt Enable */
+    uint16_t :6;               /*!< bit: 10..15  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint16_t reg;                /*!< Type      used for register access              */
+} USB_DEVICE_INTENSET_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_INTENSET_OFFSET  0x018        /**< \brief (USB_DEVICE_INTENSET offset) DEVICE Device Interrupt Enable Set */
+#define USB_DEVICE_INTENSET_RESETVALUE _U_(0x0000)  /**< \brief (USB_DEVICE_INTENSET reset_value) DEVICE Device Interrupt Enable Set */
+
+#define USB_DEVICE_INTENSET_SUSPEND_Pos 0            /**< \brief (USB_DEVICE_INTENSET) Suspend Interrupt Enable */
+#define USB_DEVICE_INTENSET_SUSPEND (_U_(0x1) << USB_DEVICE_INTENSET_SUSPEND_Pos)
+#define USB_DEVICE_INTENSET_MSOF_Pos 1            /**< \brief (USB_DEVICE_INTENSET) Micro Start of Frame Interrupt Enable in High Speed Mode */
+#define USB_DEVICE_INTENSET_MSOF    (_U_(0x1) << USB_DEVICE_INTENSET_MSOF_Pos)
+#define USB_DEVICE_INTENSET_SOF_Pos 2            /**< \brief (USB_DEVICE_INTENSET) Start Of Frame Interrupt Enable */
+#define USB_DEVICE_INTENSET_SOF     (_U_(0x1) << USB_DEVICE_INTENSET_SOF_Pos)
+#define USB_DEVICE_INTENSET_EORST_Pos 3            /**< \brief (USB_DEVICE_INTENSET) End of Reset Interrupt Enable */
+#define USB_DEVICE_INTENSET_EORST   (_U_(0x1) << USB_DEVICE_INTENSET_EORST_Pos)
+#define USB_DEVICE_INTENSET_WAKEUP_Pos 4            /**< \brief (USB_DEVICE_INTENSET) Wake Up Interrupt Enable */
+#define USB_DEVICE_INTENSET_WAKEUP  (_U_(0x1) << USB_DEVICE_INTENSET_WAKEUP_Pos)
+#define USB_DEVICE_INTENSET_EORSM_Pos 5            /**< \brief (USB_DEVICE_INTENSET) End Of Resume Interrupt Enable */
+#define USB_DEVICE_INTENSET_EORSM   (_U_(0x1) << USB_DEVICE_INTENSET_EORSM_Pos)
+#define USB_DEVICE_INTENSET_UPRSM_Pos 6