adding all ErgoTravel Files (#3129)

* adding all ErgoTravel Files

* fixing KC_KEYMAP to LAYOUT_kc on Viet's keymap.c

33 files changed, 2635 insertions, 83 deletions

diff --git a/keyboards/ergotravel/config.h b/keyboards/ergotravel/config.h
new file mode 100644
index 0000000000..beda546a04
--- /dev/null
+++ b/keyboards/ergotravel/config.h
@@ -0,0 +1,90 @@
+/*
+Copyright 2018 Pierre Constantineau <jpconstantineau@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
+
+#include QMK_KEYBOARD_CONFIG_H
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCEEB
+#define PRODUCT_ID      0x1256
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    JPConstantineau.com
+#define PRODUCT         ErgoTravel Keyboard
+#define DESCRIPTION     Split 45 percent ergonomic keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 7
+
+// wiring of each half
+#define MATRIX_ROW_PINS { C6, D7, E6, B4 }
+#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define BACKLIGHT_PIN B5
+#define BACKLIGHT_LEVELS 5
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 12    // Number of LEDs
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/ergotravel/ergotravel.c b/keyboards/ergotravel/ergotravel.c
new file mode 100644
index 0000000000..2ada434c19
--- /dev/null
+++ b/keyboards/ergotravel/ergotravel.c
@@ -0,0 +1 @@
+#include "ergotravel.h"
diff --git a/keyboards/ergotravel/ergotravel.h b/keyboards/ergotravel/ergotravel.h
new file mode 100644
index 0000000000..353000061a
--- /dev/null
+++ b/keyboards/ergotravel/ergotravel.h
@@ -0,0 +1,24 @@
+#ifndef ERGOTRAVEL_H
+#define ERGOTRAVEL_H
+
+#ifdef KEYBOARD_ergotravel_rev1
+    #include "rev1.h"
+#endif
+
+#include "quantum.h"
+
+// Used to create a keymap using only KC_ prefixed keys
+#define LAYOUT_kc( \
+    L00, L01, L02, L03, L04, L05,L06,            R00, R01, R02, R03, R04, R05, R06, \
+    L10, L11, L12, L13, L14, L15,L16,            R10, R11, R12, R13, R14, R15, R16,\
+    L20, L21, L22, L23, L24, L25,L26,            R20, R21, R22, R23, R24, R25, R26,\
+    L30, L31, L32, L33, L34, L35,                R30, R31, R32, R33, R34, R35 \
+    ) \
+    LAYOUT( \
+        KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06,                    KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \
+        KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16,                    KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \
+        KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26,                    KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \
+        KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35,                              KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \
+    )
+
+#endif
\ No newline at end of file
diff --git a/keyboards/ergotravel/i2c.c b/keyboards/ergotravel/i2c.c
new file mode 100644
index 0000000000..084c890c40
--- /dev/null
+++ b/keyboards/ergotravel/i2c.c
@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif
diff --git a/keyboards/ergotravel/i2c.h b/keyboards/ergotravel/i2c.h
new file mode 100644
index 0000000000..43e5969884
--- /dev/null
+++ b/keyboards/ergotravel/i2c.h
@@ -0,0 +1,49 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  100000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif
diff --git a/keyboards/ergotravel/info.json b/keyboards/ergotravel/info.json
new file mode 100644
index 0000000000..c92ea720cb
--- /dev/null
+++ b/keyboards/ergotravel/info.json
@@ -0,0 +1,15 @@
+{
+    "keyboard_name": "ErgoTravel", 
+    "manufacturer": "jpconstantineau", 
+    "identifier": "0x1256", 
+    "url": "https://github.com/jpconstantineau/ErgoTravel", 
+    "maintainer": "qmk", 
+    "processor": "atmega32u4",  
+    "width": 14.5, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7.5, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}]
+        }
+    }
+}
diff --git a/keyboards/ergotravel/keymaps/ckofy/config.h b/keyboards/ergotravel/keymaps/ckofy/config.h
new file mode 100644
index 0000000000..caae080d70
--- /dev/null
+++ b/keyboards/ergotravel/keymaps/ckofy/config.h
@@ -0,0 +1,46 @@
+/*
+Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+/* Use I2C or Serial, not both */
+
+//#define USE_SERIAL
+#define USE_I2C
+
+/* Select hand configuration */
+
+//#define MASTER_LEFT
+#define MASTER_RIGHT
+//#define EE_HANDS
+
+#define TAPPING_TOGGLE 2
+
+// required if modifiers are defined in layers besided the default one.
+#define PREVENT_STUCK_MODIFIERS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#endif
diff --git a/keyboards/ergotravel/keymaps/ckofy/keymap.c b/keyboards/ergotravel/keymaps/ckofy/keymap.c
new file mode 100644
index 0000000000..cc2c33cca3
--- /dev/null
+++ b/keyboards/ergotravel/keymaps/ckofy/keymap.c
@@ -0,0 +1,202 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#define _COLEMAK 0
+#define _QWERTY 1
+#define _NUMPAD 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  COLEMAK = SAFE_RANGE,
+  QWERTY,
+  NUMPAD,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+/* Fn keys */
+
+enum {
+
+  F_SFT = 0,
+  F_ALT,
+  F_CTRL,
+  F_NUMPAD
+// F_LOWER,
+//  F_RAISE,
+};
+
+#define KC_ KC_TRNS
+#define _______ KC_TRNS
+#define KC_XXXX KC_NO
+
+#define KC_CMK COLEMAK
+#define KC_QWE QWERTY
+#define KC_LOWR LOWER
+#define KC_RASE RAISE
+#define KC_QRAS QRAISE
+#define KC_ADJT ADJUST
+#define KC_RST RESET
+#define KC_BL_S BL_STEP
+#define KC_DBUG DEBUG
+#define KC_RTOG RGB_TOG
+#define KC_RMOD RGB_MOD
+#define KC_RHUI RGB_HUI
+#define KC_RHUD RGB_HUD
+#define KC_RSAI RGB_SAI
+#define KC_RSAD RGB_SAD
+#define KC_RVAI RGB_VAI
+#define KC_RVAD RGB_VAD
+//#define KC_CATDEL LCTL(LALT(KC_DEL)) // Ctrl alt del
+#define KC_CPY LCTL(KC_C)
+#define KC_PST LCTL(KC_V)
+#define KC_SELA LCTL(KC_A)
+#define KC_UDO LCTL(KC_Z)
+#define KC_CUT LCTL(KC_X)
+#define KC_SVE LCTL(KC_S)
+#define KC_OSH F(F_SFT)
+#define KC_OCTL F(F_CTRL)
+#define KC_NUMP F(F_NUMPAD)
+#define KC_SHESC MT(MOD_LSFT,KC_ESC)
+#define KC_SHENT MT(MOD_RSFT,KC_ENT)
+//#define KC_NUMP TG(_NUMPAD)  // Toggle layer NUMPAD for use in KC_keymaps
+//#define KC_RST RESET
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+// Colemak Mod-DH is used. https://colemakmods.github.io/mod-dh/
+  [_COLEMAK] = LAYOUT_kc(
+  //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+     TAB , Q  , W  , F  , P  , B  ,LPRN,      RPRN, J  , L  , U  , Y  ,SCLN,BSPC,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+     BSPC, A  , R  , S  , T  , G  ,EQL ,      MINS, K  , N  , E  , I  , O  ,QUOT,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+    SHESC, Z  , X  , C  , D  , V  ,NUMP,       ENT, M  , H  ,COMM,DOT ,SLSH,SHENT,
+  //|----+----+----+----+----+----+----.     .----+----+----+----+----+----+----|
+     OCTL,LALT,LGUI,DEL ,LOWR, SPC,                OSH, RASE,LEFT,RIGHT,RALT,RCTL
+  //`----+----+----+--+-+----/----/               \----\----+----+----+----+----'
+  ),
+
+  [_QWERTY] = LAYOUT_kc(
+  //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+     ESC , Q  , W  , E  , R  , T  ,LBRC,      RBRC, Y  , U  , I  , O  , P  ,BSPC,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+     TAB , A  , S  , D  , F  , G  ,LPRN,      RPRN, H  , J  , K  , L  ,SCLN,QUOT,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+     LSFT, Z  , X  , C  , V  , B  ,    ,          , N  , M  ,COMM,DOT ,SLSH,ENT ,
+  //|----+----+----+----+----+----+----.     .----+----+----+----+----+----+----|
+     LCTL,LGUI,LALT,DEL ,    , SPC,                SPC ,    ,LEFT,DOWN, UP ,RIGHT
+  //`----+----+----+--+-+----/----/               \----\----+----+----+----+----'
+  ),
+
+  [_NUMPAD] = LAYOUT_kc(
+    //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+           ,    ,    ,    ,    ,    ,    ,          ,ASTR, P7 , P8 , P9 ,SLSH,    ,
+    //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+           ,    ,    ,    ,    ,    ,    ,          ,PIPE, P4 , P5 , P6 ,MINS,    ,
+    //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+           ,    ,    ,    ,    ,    ,    ,          ,COMM, P1 , P2 , P3 ,PLUS,    ,
+    //|----+----+----+----+----+----+----.     .----+----+----+----+----+----+----|
+           ,    ,    ,    ,    ,    ,                    , P0 ,NLCK,    ,    ,    
+    //`----+----+----+--+-+----/----/               \----\----+----+----+----+----'
+  ),
+
+  [_LOWER] = LAYOUT_kc(
+  //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+         ,XXXX,XXXX,XXXX,XXXX,CAPS,    ,          ,PGUP,HOME, UP ,END ,DEL ,    ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+         ,SELA,LALT,LSFT,LCTL,SVE ,    ,          ,PGDN,LEFT,DOWN,RGHT,BSPC,INS ,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+         ,UDO ,CUT ,CPY ,PST ,XXXX,    ,          ,XXXX,XXXX,COMM,DOT ,SLSH,    ,
+  //|----+----+----+----+----+----+----.     .----+----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,                    ,    ,    ,    ,    ,    
+  //`----+----+----+--+-+----/----/               \----\----+----+----+----+----'
+  ),
+
+  [_RAISE] = LAYOUT_kc(
+    //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+           ,AMPR,PERC,HASH,EXLM,LPRN,    ,          ,ASTR,RPRN, AT ,DLR ,CIRC,BSPC,
+    //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+           , 7  , 5  , 3  , 1  , 9  ,LBRC,      RBRC,  8 , 0  , 2  , 4  , 6  ,BSLS,
+    //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+           , GRV,TILD,XXXX,EQL ,PLUS,    ,          ,UNDS,MINS,COMM,DOT ,SLSH,ENT ,
+    //|----+----+----+----+----+----+----.     .----+----+----+----+----+----+----|
+           ,    ,    ,    ,    ,    ,                    ,    ,    ,    ,    ,    
+    //`----+----+----+--+-+----/----/               \----\----+----+----+----+----'
+  ),
+
+
+  [_ADJUST] = LAYOUT_kc(
+    //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+           , F1 , F2 , F3 , F4 , F5 , F6,         F7,  F8, F9 ,F10 , F11, F12,BSPC,
+    //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+           ,    ,    ,    ,    ,    ,    ,          ,    , CMK,QWE ,    ,    ,    ,
+    //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+           ,    ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,    ,
+    //|----+----+----+----+----+----+----.     .----+----+----+----+----+----+----|
+           ,    ,    ,    ,    ,    ,                    ,    ,    ,VOLD,VOLU,MUTE
+    //`----+----+----+--+-+----/----/               \----\----+----+----+----+----'
+  ) 
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [F_SFT]  = ACTION_MODS_ONESHOT (MOD_LSFT)
+  ,[F_ALT]  = ACTION_MODS_ONESHOT (MOD_LALT)
+  ,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL)
+  ,[F_NUMPAD] = ACTION_LAYER_TAP_TOGGLE(_NUMPAD)
+// ,[F_LOWER] = ACTION_LAYER_TAP_TOGGLE(LOWER)                // FN1 - Momentary Layer 1 (Lower)    
+// ,[F_RAISE] = ACTION_LAYER_TAP_TOGGLE(RAISE)                // FN2 - Momentary Layer 2 (Raise)
+};   
+
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+
+      }
+      return false;
+      break;
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
diff --git a/keyboards/ergotravel/keymaps/ckofy/rules.mk b/keyboards/ergotravel/keymaps/ckofy/rules.mk
new file mode 100644
index 0000000000..457a3d01d4
--- /dev/null
+++ b/keyboards/ergotravel/keymaps/ckofy/rules.mk
@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/ergotravel/keymaps/default/config.h b/keyboards/ergotravel/keymaps/default/config.h
new file mode 100644
index 0000000000..abb8cfa8e6
--- /dev/null
+++ b/keyboards/ergotravel/keymaps/default/config.h
@@ -0,0 +1,41 @@
+/*
+Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#endif
diff --git a/keyboards/ergotravel/keymaps/default/keymap.c b/keyboards/ergotravel/keymaps/default/keymap.c
new file mode 100644
index 0000000000..ef168a5362
--- /dev/null
+++ b/keyboards/ergotravel/keymaps/default/keymap.c
@@ -0,0 +1,134 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+#define KC_ KC_TRNS
+#define _______ KC_TRNS
+
+#define KC_LOWR LOWER
+#define KC_RASE RAISE
+#define KC_ADJT ADJUST
+#define KC_RST RESET
+#define KC_BL_S BL_STEP
+#define KC_DBUG DEBUG
+#define KC_RTOG RGB_TOG
+#define KC_RMOD RGB_MOD
+#define KC_RHUI RGB_HUI
+#define KC_RHUD RGB_HUD
+#define KC_RSAI RGB_SAI
+#define KC_RSAD RGB_SAD
+#define KC_RVAI RGB_VAI
+#define KC_RVAD RGB_VAD
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT_kc(
+  //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+     ESC , Q  , W  , E  , R  , T  ,LBRC,      RBRC, Y  , U  , I  , O  , P  ,BSPC,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+     TAB , A  , S  , D  , F  , G  , A,          A,  H  , J  , K  , L  ,SCLN,QUOT,
+  //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+     LSFT, Z  , X  , C  , V  , B  , A,        SPC,  N  , M  ,COMM,DOT ,SLSH,ENT ,
+  //|----+----+----+----+----+----+----.     .----+----+----+----+----+----+----|
+     LCTL,LGUI,LALT,ADJT,LOWR,SPC,                 SPC, RASE,LEFT, UP ,DOWN,RIGHT
+  //`----+----+----+--+-+----/----/               \----\----+----+----+----+----'
+  ),
+
+  [_LOWER] = LAYOUT_kc(
+    //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+      GRAVE, 1  , 2  , 3  , 4  , 5  , A,           B,  6  , 7  , 8  , 9  , 0  ,DEL,
+    //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+       TAB , F1 , F2 , F3 , F4 , F5 , F6 ,         D,  Y  ,MINS, EQL,LBRC,RBRC,BSLS,
+    //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+       LSFT, F7 , F8 , F9 , F10, F11, F12,       SPC,  N  , M ,COMM,DOT ,SLSH,ENT ,
+    //|----+----+----+----+----+----+----.     .----+----+----+----+----+----+----|
+       LCTL,LGUI,LALT,ADJT,LOWR,SPC,                 SPC, RASE,LEFT, UP ,DOWN,RIGHT
+    //`----+----+----+--+-+----/----/               \----\----+----+----+----+----'
+  ),
+
+  [_RAISE] = LAYOUT_kc(
+    //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+       ESC , 1  , 2  , 3  , 4  , 5  , A,          B,  6  , 7  , 8  , 9  , 0  ,BSPC,
+    //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+       TAB , Q  , W  , E  , R  , T  , C ,         D,  Y  , U  , I  , O  , P  ,DEL ,
+    //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+       LSFT, Z  , X  , C  , V  , B  , A,        SPC,  N  , M  ,COMM,DOT ,SLSH,ENT ,
+    //|----+----+----+----+----+----+----.     .----+----+----+----+----+----+----|
+       LCTL,LGUI,LALT,ADJT,LOWR,SPC,                 SPC, RASE,LEFT, UP ,DOWN,RIGHT
+    //`----+----+----+--+-+----/----/               \----\----+----+----+----+----'
+  ),
+
+  [_ADJUST] = LAYOUT_kc(
+    //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
+       ESC , F1 , F2 , F3 , F4 , F5 , F6,         F7,  F8, F9 ,F10 , F11, F12,BSPC,
+    //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+       TAB , Q  , W  , E  , R  , T  , C ,         D,  Y  , U  , I  , O  , P  ,DEL ,
+    //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
+       LSFT, Z  , X  , C  , V  , B  , A,        SPC,  N  , M  ,COMM,DOT ,SLSH,ENT ,
+    //|----+----+----+----+----+----+----.     .----+----+----+----+----+----+----|
+       LCTL,LGUI,LALT,ADJT,LOWR,SPC,                 SPC, RASE,LEFT, UP ,DOWN,RIGHT
+    //`----+----+----+--+-+----/----/               \----\----+----+----+----+----'
+  )