Add keyboard: mt40 (#2001)

* add keyboard: chinese planck clone

* rename chinese_planck to mt40

* add image for the mt40 board

12 files changed, 1195 insertions, 0 deletions

diff --git a/keyboards/mt40/config.h b/keyboards/mt40/config.h
new file mode 100644
index 0000000000..394cc78981
--- /dev/null
+++ b/keyboards/mt40/config.h
@@ -0,0 +1,207 @@
+/*
+Copyright 2017 REPLACE_WITH_YOUR_NAME
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x20A0
+#define PRODUCT_ID      0x422D
+
+#define DEVICE_VER      0x0001
+
+#define MANUFACTURER    ThomasDehaeze
+#define PRODUCT         mt40
+
+#define DESCRIPTION     A Planck clone
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 15
+
+#define RGB_DI_PIN C0
+#define RGBLED_NUM 12
+#define RGBLIGHT_ANIMATIONS
+
+#define RGBLIGHT_HUE_STEP 12
+#define RGBLIGHT_SAT_STEP 15
+#define RGBLIGHT_VAL_STEP 18
+
+#define NO_UART 1
+#define BOOTLOADHID_BOOTLOADER 1
+
+#define TAPPING_TERM 200
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+/* #define CC6 0x63 // C3 */
+/* #define CB6 0x37 // B7 */
+/* #define CC7 0x62 // C2 */
+
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C2, C3, C4, C5, C6, C7, D7 }
+/* #define UNUSED_PINS */
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* #define DIODE_DIRECTION COL2ROW */
+
+#define BACKLIGHT_PIN D2
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+/* #define DEBOUNCING_DELAY 5 */
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+/* #define LOCKING_SUPPORT_ENABLE */
+/* Locking resynchronize hack */
+/* #define LOCKING_RESYNC_ENABLE */
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#endif
diff --git a/keyboards/mt40/i2c.c b/keyboards/mt40/i2c.c
new file mode 100644
index 0000000000..c27f3e3d17
--- /dev/null
+++ b/keyboards/mt40/i2c.c
@@ -0,0 +1,104 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include <util/twi.h>
+
+#include "i2c.h"
+
+void i2c_set_bitrate(uint16_t bitrate_khz) {
+    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
+    if (bitrate_div >= 16) {
+        bitrate_div = (bitrate_div - 16) / 2;
+    }
+    TWBR = bitrate_div;
+}
+
+void i2c_init(void) {
+    // set pull-up resistors on I2C bus pins
+    PORTC |= 0b11;
+
+    i2c_set_bitrate(400);
+
+    // enable TWI (two-wire interface)
+    TWCR |= (1 << TWEN);
+
+    // enable TWI interrupt and slave address ACK
+    TWCR |= (1 << TWIE);
+    TWCR |= (1 << TWEA);
+}
+
+uint8_t i2c_start(uint8_t address) {
+    // reset TWI control register
+    TWCR = 0;
+
+    // begin transmission and wait for it to end
+    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the start condition was successfully transmitted
+    if ((TWSR & 0xF8) != TW_START) {
+        return 1;
+    }
+
+    // transmit address and wait
+    TWDR = address;
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the device has acknowledged the READ / WRITE mode
+    uint8_t twst = TW_STATUS & 0xF8;
+    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
+        return 1;
+    }
+
+    return 0;
+}
+
+void i2c_stop(void) {
+    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+}
+
+uint8_t i2c_write(uint8_t data) {
+    TWDR = data;
+
+    // transmit data and wait
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
+        return 1;
+    }
+
+    return 0;
+}
+
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
+    if (i2c_start(address)) {
+        return 1;
+    }
+
+    for (uint16_t i = 0; i < length; i++) {
+        if (i2c_write(data[i])) {
+            return 1;
+        }
+    }
+
+    i2c_stop();
+
+    return 0;
+}
diff --git a/keyboards/mt40/i2c.h b/keyboards/mt40/i2c.h
new file mode 100644
index 0000000000..27c9d3d050
--- /dev/null
+++ b/keyboards/mt40/i2c.h
@@ -0,0 +1,25 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __I2C_H__
+#define __I2C_H__
+
+void i2c_init(void);
+void i2c_set_bitrate(uint16_t bitrate_khz);
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
+
+#endif
diff --git a/keyboards/mt40/keymaps/default/keymap.c b/keyboards/mt40/keymaps/default/keymap.c
new file mode 100644
index 0000000000..2da5dd6458
--- /dev/null
+++ b/keyboards/mt40/keymaps/default/keymap.c
@@ -0,0 +1,84 @@
+/* Copyright 2017 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "mt40.h"
+#include "action_layer.h"
+#include "rgblight.h"
+
+#define _______ KC_TRNS
+#define OOOOOOO KC_TRNS
+
+#define C_LCTL MT(MOD_LCTL, KC_QUOT)
+#define C_RCTL MT(MOD_RCTL, KC_GRV)
+
+#define C_LGUI MT(MOD_LGUI, KC_LBRC)
+#define C_RGUI MT(MOD_RGUI, KC_RBRC)
+
+#define C_ESC MT(MOD_LCTL, KC_ESC)
+#define C_ENT MT(MOD_RCTL, KC_ENT)
+
+
+/* 
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |  SPC |  BSP |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = KEYMAP(
+        KC_TAB,  KC_Q,   KC_W,     KC_E,  KC_R,  KC_T,   KC_Y,   KC_U,  KC_I,    KC_O,     KC_P,    KC_BSPC, \
+        C_ESC,   KC_A,   KC_S,     KC_D,  KC_F,  KC_G,   KC_H,   KC_J,  KC_K,    KC_L,     KC_SCLN, C_ENT,   \
+        KC_LSPO, KC_Z,   KC_X,     KC_C,  KC_V,  KC_B,   KC_N,   KC_M,  KC_COMM, KC_DOT,   KC_SLSH, KC_RSPC, \
+        C_LCTL,  C_LGUI, MOD_LALT, MO(3), MO(1), KC_SPC, KC_SPC, MO(2), MO(4),   MOD_RALT, C_RGUI,  C_RCTL),
+
+    [1] = KEYMAP(
+        _______, KC_F9,   KC_F10,  KC_F11,  KC_F12,  RGB_TOG, RGB_MOD, KC_P7, KC_P8,   KC_P9,   KC_PSLS, _______, \
+        _______, KC_F5,   KC_F6,   KC_F7,   KC_F8,   RGB_VAD, RGB_VAI, KC_P4, KC_P5,   KC_P6,   KC_PAST, _______, \
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   BL_TOGG, BL_INC,  KC_P1, KC_P2,   KC_P3,   KC_PMNS, KC_PGUP, \
+        _______, _______, _______, _______, OOOOOOO, _______, _______, KC_P0, KC_PDOT, KC_PENT, KC_PPLS, KC_PGDN),
+
+    [2] = KEYMAP(
+        _______,  _______, _______, _______, _______, _______, _______, KC_QUOT, KC_EQL,  KC_LBRC, KC_RBRC, KC_NUBS, \
+        KC_GRAVE, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, \
+        _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+        _______,  _______, _______, _______, _______, _______, _______, OOOOOOO, KC_HOME, KC_PGDOWN, KC_PGUP, KC_END),
+
+    [3] = KEYMAP(
+        _______, _______, _______, _______, _______, _______, KC_COPY, KC_PGUP, _______, _______,  KC_PASTE, KC_DEL,  \
+        _______, _______, _______, KC_PGDN, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT, _______,  _______, \
+        _______, _______, KC_CUT,  _______, _______, _______, _______, _______, _______, _______,  _______,  _______, \
+        _______, _______, _______, OOOOOOO, _______, _______, _______, _______, _______, _______,  _______,  _______),
+
+    [4] = KEYMAP(
+        _______, _______, _______, _______, _______, _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, \
+        KC_PSCR, KC_INS,  KC_MUTE, KC_VOLD, KC_VOLU, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, _______, _______, \
+        KC_CAPS, _______, KC_MPLY, KC_MRWD, KC_MFFD, _______, _______, _______, KC_BTN1, KC_BTN2, _______, _______, \
+        _______, _______, _______, _______, _______, _______, _______, _______, OOOOOOO, _______, _______, _______),
+
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),
+    [1] = ACTION_LAYER_MOMENTARY(2),
+    [2] = ACTION_LAYER_MOMENTARY(3),
+    [3] = ACTION_LAYER_MOMENTARY(4),
+};
+
diff --git a/keyboards/mt40/keymaps/default/readme.md b/keyboards/mt40/keymaps/default/readme.md
new file mode 100644
index 0000000000..033b75fa29
--- /dev/null
+++ b/keyboards/mt40/keymaps/default/readme.md
@@ -0,0 +1,17 @@
+# Default Layout on a Planck Clone Keyboard
+
+## Base Layer
+[Imgur](https://i.imgur.com/XivfDS0.png)
+
+## FN1 Layer - Numpad and Function keys
+[Imgur](https://i.imgur.com/sXTYfAn.png)
+
+## FN2 Layer - Numbers and Symbols
+[Imgur](https://i.imgur.com/Z4Nqp7g.png)
+
+## FN3 Layer - Vim
+[Imgur](https://i.imgur.com/5whRGOx.png)
+
+## FN3 Layer - Multimedia
+[Imgur](https://i.imgur.com/K0jfHIO.png)
+
diff --git a/keyboards/mt40/matrix.c b/keyboards/mt40/matrix.c
new file mode 100644
index 0000000000..140026013f
--- /dev/null
+++ b/keyboards/mt40/matrix.c
@@ -0,0 +1,106 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include <util/delay.h>
+
+#include "matrix.h"
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+
+static uint8_t debouncing = DEBOUNCE;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+void matrix_init(void) {
+    // all outputs for rows high
+    DDRB = 0xFF;
+    PORTB = 0xFF;
+    // all inputs for columns
+    DDRA = 0x00;
+    DDRC &= ~(0x111111<<2);
+    DDRD &= ~(1<<PIND7);
+    // all columns are pulled-up
+    PORTA = 0xFF;
+    PORTC |= (0b111111<<2);
+    PORTD |= (1<<PIND7);
+
+    // initialize matrix state: all keys off
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        matrix[row] = 0x00;
+        matrix_debouncing[row] = 0x00;
+    }
+}
+
+void matrix_set_row_status(uint8_t row) {
+    DDRB = (1 << row);
+    PORTB = ~(1 << row);
+}
+
+uint8_t bit_reverse(uint8_t x) {
+    x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
+    x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
+    x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
+    return x;
+}
+
+uint8_t matrix_scan(void) {
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        matrix_set_row_status(row);
+        _delay_us(5);
+
+        matrix_row_t cols = (
+            // cols 0..7, PORTA 0 -> 7
+            (~PINA) & 0xFF
+        ) | (
+            // cols 8..13, PORTC 7 -> 0
+            bit_reverse((~PINC) & 0xFF) << 8
+        ) | (
+            // col 14, PORTD 7
+            ((~PIND) & (1 << PIND7)) << 7
+        );
+
+        if (matrix_debouncing[row] != cols) {
+            matrix_debouncing[row] = cols;
+            debouncing = DEBOUNCE;
+        }
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    matrix_scan_user();
+
+    return 1;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+    return matrix[row];
+}
+
+void matrix_print(void) {
+}
diff --git a/keyboards/mt40/mt40.c b/keyboards/mt40/mt40.c
new file mode 100644
index 0000000000..0e7a30d99f
--- /dev/null
+++ b/keyboards/mt40/mt40.c
@@ -0,0 +1,43 @@
+/* Copyright 2017 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "mt40.h"
+#include "rgblight.h"
+
+#include <avr/pgmspace.h>
+
+#include "action_layer.h"
+#include "i2c.h"
+#include "quantum.h"
+
+extern rgblight_config_t rgblight_config;
+
+void rgblight_set(void) {
+    if (!rgblight_config.enable) {
+        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+            led[i].r = 0;
+            led[i].g = 0;
+            led[i].b = 0;
+        }
+    }
+
+    i2c_init();
+    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+    rgblight_task();
+}
diff --git a/keyboards/mt40/mt40.h b/keyboards/mt40/mt40.h
new file mode 100644
index 0000000000..18cefd827b
--- /dev/null
+++ b/keyboards/mt40/mt40.h
@@ -0,0 +1,87 @@
+/* Copyright 2017 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef MT40_H
+#define MT40_H
+
+#include "quantum_keycodes.h"
+#include "keycode.h"
+#include "action.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    K00,  K01,  K02,  K03,  K04,  K05,  K06,  K07,  K08,  K09,  K0A,  K0B, \
+    K10,  K11,  K12,  K13,  K14,  K15,  K16,  K17,  K18,  K19,  K1A,  K1B, \
+    K20,  K21,  K22,  K23,  K24,  K25,  K26,  K27,  K28,  K29,  K2A,  K2B, \
+    K30,  K31,  K32,  K33,  K34,  K35,  K36,  K37,  K38,  K39,  K3A,  K3B \
+) { \
+    { K31,   K32,   K33,   KC_NO, K34,   K35,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K37,   KC_NO, KC_NO, KC_NO }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   KC_NO, KC_NO, KC_NO, KC_NO, K2A,   KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { K30,   K11,   K12,   K13,   K14,   K15,   KC_NO, KC_NO, KC_NO, KC_NO, K1A,   K1B,   KC_NO, KC_NO, KC_NO }, \
+    { K10,   K01,   K02,   K03,   K04,   K05,   KC_NO, KC_NO, KC_NO, KC_NO, K0A,   KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { K00,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0B   }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, KC_NO, K06,   K16,   K26,   K36,   K38,   K3A,   K39,   K3B,   KC_NO, KC_NO, K07,   K17,   K27   }, \
+    { KC_NO, KC_NO, K09,   K19,   K29,   KC_NO, K2B,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K08,   K18,   K28   }  \
+}
+
+/* #define KC_KEYMAP( \ */
+/*     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ */
+/*     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ */
+/*     k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ */
+/*     k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ */
+/* ) \ */
+/* { \ */
+/*     { KC_##k31, KC_##k32, KC_##k33, KC_NO,    KC_##k34, KC_##k35, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##k37, KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \ */
+/*     { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##k2a, KC_NO,    KC_NO,    KC_NO    }, \ */
+/*     { KC_##k30, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##k1b, KC_##k1a, KC_NO,    KC_NO,    KC_NO    }, \ */
+/*     { KC_##k10, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##k0a, KC_NO,    KC_NO,    KC_NO    }, \ */
+/*     { KC_##k00, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##k0b }, \ */
+/*     { KC_NO,    KC_NO,    KC_##k06, KC_##k16, KC_##k26, KC_##k36, KC_##k38, KC_##k3a, KC_##k17, KC_##k07, KC_NO,    KC_NO,    KC_##k3b, KC_##k39, KC_##k27 }  \ */
+/*     { KC_NO,    KC_NO,    KC_##k09, KC_##k19, KC_##k29, KC_NO,    KC_NO,    KC_##k2b, KC_##k18, KC_##k08, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##k28 }  \ */
+/* } */
+
+/* #define FR_A KC_A */
+/* #define FR_B KC_B */
+/* #define FR_C KC_C */
+/* #define FR_D KC_D */
+/* #define FR_E KC_E */
+/* #define FR_F KC_F */
+/* #define FR_G KC_G */
+/* #define FR_H KC_H */
+/* #define FR_I KC_I */
+/* #define FR_J KC_J */
+/* #define FR_K KC_K */
+/* #define FR_L KC_L */
+/* #define FR_M KC_M */
+/* #define FR_N KC_N */
+/* #define FR_O KC_O */
+/* #define FR_P KC_P */
+/* #define FR_Q KC_Q */
+/* #define FR_R KC_R */
+/* #define FR_S KC_S */
+/* #define FR_T KC_T */
+/* #define FR_U KC_U */
+/* #define FR_V KC_V */
+/* #define FR_W KC_W */
+/* #define FR_X KC_X */
+/* #define FR_Y KC_Y */
+/* #define FR_Z KC_Z */
+
+
+#endif
diff --git a/keyboards/mt40/program b/keyboards/mt40/program
new file mode 100755
index 0000000000..e8786f566d
--- /dev/null
+++ b/keyboards/mt40/program
@@ -0,0 +1,74 @@
+#!/usr/bin/env python2.7
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+from __future__ import print_function
+
+import os
+import sys
+import time
+import usb
+
+if len(sys.argv) < 2:
+    print('Usage: %s <firmware.hex>' % sys.argv[0])
+    sys.exit(1)
+
+print('Searching for planck clone keyboard... ', end='')
+
+dev = usb.core.find(idVendor=0x20A0, idProduct=0x422D)
+if dev is None:
+    raise ValueError('Device not found')
+
+print('Found', end='\n\n')
+
+print('Device Information:')
+print('  idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor))
+print('  idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct))
+print('Manufacturer: %s' % (dev.iManufacturer))
+print('Serial: %s' % (dev.iSerialNumber))
+print('Product: %s' % (dev.iProduct), end='\n\n')
+
+print('Transferring control to bootloader... ', end='')
+
+dev.set_configuration()
+
+request_type = usb.util.build_request_type(
+        usb.util.CTRL_OUT,
+        usb.util.CTRL_TYPE_CLASS,
+        usb.util.CTRL_RECIPIENT_DEVICE)
+
+USBRQ_HID_SET_REPORT = 0x09
+HID_REPORT_OPTION = 0x0301
+
+
+try:
+    dev.ctrl_transfer(
+            request_type,
+            USBRQ_HID_SET_REPORT,
+            HID_REPORT_OPTION,
+            0,
+            [0, 0, 0xFF] + [0] * 5
+            )
+except usb.core.USBError:
+    # for some reason I keep getting USBError, but it works!
+    pass
+
+# wait a bit until bootloader starts up
+time.sleep(2)
+
+print('OK')
+print('Programming...')
+if os.system('bootloadHID -r "%s"' % sys.argv[1]) == 0:
+    print('\nDone!')
diff --git a/keyboards/mt40/readme.md b/keyboards/mt40/readme.md
new file mode 100644
index 0000000000..aba5fa0d0c
--- /dev/null
+++ b/keyboards/mt40/readme.md
@@ -0,0 +1,16 @@
+# MT40: An 40% Ortholinear Keyboard
+
+## Program 
+
+`make mt40:default:program`
+
+## Pictures
+
+[PCB](https://i.imgur.com/8BeeY07.jpg)
+[Backview of the PCB](https://i.imgur.com/0opsDkt.jpg)
+[Board with Sleeve](https://i.imgur.com/44FhPU8.jpg)
+
+## Buy
+
+https://world.taobao.com/item/548335974877.htm?fromSite=main&spm=a312a.7700824.w4002-6810221593.51.670e68a08mRh69
+
diff --git a/keyboards/mt40/rules.mk b/keyboards/mt40/rules.mk
new file mode 100644
index 0000000000..10023da0ee
--- /dev/null
+++ b/keyboards/mt40/rules.mk
@@ -0,0 +1,36 @@
+# MCU name
+MCU = atmega32a
+PROTOCOL = VUSB
+
+# unsupported features for now
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+
+# processor frequency
+F_CPU = 12000000
+
+# build options
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no   # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes  # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no    # Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+NKRO_ENABLE ?= no       # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ # nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no       # MIDI controls
+AUDIO_ENABLE ?= no      # Audio output on port C6
+UNICODE_ENABLE ?= no    # Unicode
+BLUETOOTH_ENABLE ?= no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= yes  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_CUSTOM_DRIVER = yes
+TAP_DANCE_ENABLE = no
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+OPT_DEFS += -DBOOTLOADER_SIZE=2048
+
+# custom matrix setup
+CUSTOM_MATRIX = yes
+SRC = matrix.c i2c.c
+
+# programming options
+PROGRAM_CMD = ./keyboards/mt40/program $(TARGET).hex
diff --git a/keyboards/mt40/usbconfig.h b/keyboards/mt40/usbconfig.h
new file mode 100644
index 0000000000..498b01fd9e
--- /dev/null
+++ b/keyboards/mt40/usbconfig.h
@@ -0,0 +1,396 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1