Re-structure splinky support to handle versioning in the same fashion as for the teensy (#19123)

81 files changed, 660 insertions, 398 deletions

diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h
deleted file mode 100644
index 8e4a2de892..0000000000
--- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Key matrix configuration. */
-#define MATRIX_ROW_PINS \
-    { GP26, GP5, GP4, GP9 }
-
-/* serial.c configuration (for split keyboard). */
-#define SOFT_SERIAL_PIN GP1
-
-/* RGB settings. */
-#define RGB_DI_PIN GP0
-
-/* SPI & PMW3360 settings. */
-#define SPI_DRIVER SPID0
-#define SPI_MISO_PIN GP20
-
-/* Reset. */
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/readme.md b/keyboards/bastardkb/charybdis/3x5/v2/splinky/readme.md
deleted file mode 100644
index 22df77bbaa..0000000000
--- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/readme.md
+++ /dev/null
@@ -1,6 +0,0 @@
-# Splinky controller
-
-The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
-
-See https://github.com/plut0nium/0xB2/#releases to figure out the right version
-for you (v2 and v3) supported.
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/rules.mk b/keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/rules.mk
deleted file mode 100644
index c9c50319db..0000000000
--- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/rules.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/rules.mk b/keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/rules.mk
deleted file mode 100644
index c9c50319db..0000000000
--- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/rules.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.
diff --git a/keyboards/bastardkb/charybdis/3x6/v2/splinky/config.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky_2/config.h
index 8e4a2de892..cbdc3ae855 100644
--- a/keyboards/bastardkb/charybdis/3x6/v2/splinky/config.h
+++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky_2/config.h
@@ -20,6 +20,16 @@
 /* Key matrix configuration. */
 #define MATRIX_ROW_PINS \
     { GP26, GP5, GP4, GP9 }
+#define MATRIX_COL_PINS \
+    { GP28, GP15, GP6, GP7, GP8 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define SPLIT_HAND_PIN GP13
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
 
 /* serial.c configuration (for split keyboard). */
 #define SOFT_SERIAL_PIN GP1
@@ -29,7 +39,10 @@
 
 /* SPI & PMW3360 settings. */
 #define SPI_DRIVER SPID0
+#define SPI_SCK_PIN GP18
 #define SPI_MISO_PIN GP20
+#define SPI_MOSI_PIN GP19
+#define POINTING_DEVICE_CS_PIN GP14
 
 /* Reset. */
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json b/keyboards/bastardkb/charybdis/3x5/v2/splinky_2/info.json
index 98f436f52b..98f436f52b 100644
--- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json
+++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky_2/info.json
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/mcuconf.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky_2/mcuconf.h
index 0fdd67c3a2..0fdd67c3a2 100644
--- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/mcuconf.h
+++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky_2/mcuconf.h
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky_2/readme.md b/keyboards/bastardkb/charybdis/3x5/v2/splinky_2/readme.md
new file mode 100644
index 0000000000..662eb5825c
--- /dev/null
+++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky_2/readme.md
@@ -0,0 +1,5 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/rules.mk b/keyboards/bastardkb/charybdis/3x5/v2/splinky_2/rules.mk
index 7e38f33d5d..21a9506077 100644
--- a/keyboards/bastardkb/charybdis/3x5/v2/splinky/rules.mk
+++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky_2/rules.mk
@@ -35,5 +35,3 @@ POINTING_DEVICE_DRIVER = pmw3360
 
 SERIAL_DRIVER = vendor
 WS2812_DRIVER = vendor
-
-DEFAULT_FOLDER = bastardkb/charybdis/3x5/v2/splinky/v3
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky_3/config.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky_3/config.h
new file mode 100644
index 0000000000..3772044c15
--- /dev/null
+++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky_3/config.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP26, GP5, GP4, GP9 }
+#define MATRIX_COL_PINS \
+    { GP28, GP21, GP6, GP7, GP8 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define SPLIT_HAND_PIN GP15
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN GP1
+
+/* RGB settings. */
+#define RGB_DI_PIN GP0
+
+/* SPI & PMW3360 settings. */
+#define SPI_DRIVER SPID0
+#define SPI_SCK_PIN GP22
+#define SPI_MISO_PIN GP20
+#define SPI_MOSI_PIN GP23
+#define POINTING_DEVICE_CS_PIN GP16
+
+/* Reset. */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky_3/info.json b/keyboards/bastardkb/charybdis/3x5/v2/splinky_3/info.json
new file mode 100644
index 0000000000..98f436f52b
--- /dev/null
+++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky_3/info.json
@@ -0,0 +1,6 @@
+{
+    "keyboard_name": "Charybdis Nano (3x5) Splinky",
+    "usb": {
+        "device_version": "2.0.0"
+    }
+}
diff --git a/keyboards/bastardkb/charybdis/3x6/v2/splinky/mcuconf.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky_3/mcuconf.h
index 0fdd67c3a2..0fdd67c3a2 100644
--- a/keyboards/bastardkb/charybdis/3x6/v2/splinky/mcuconf.h
+++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky_3/mcuconf.h
diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky_3/readme.md b/keyboards/bastardkb/charybdis/3x5/v2/splinky_3/readme.md
new file mode 100644
index 0000000000..662eb5825c
--- /dev/null
+++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky_3/readme.md
@@ -0,0 +1,5 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).
diff --git a/keyboards/bastardkb/charybdis/4x6/v2/splinky/rules.mk b/keyboards/bastardkb/charybdis/3x5/v2/splinky_3/rules.mk
index 34ef782d2f..21a9506077 100644
--- a/keyboards/bastardkb/charybdis/4x6/v2/splinky/rules.mk
+++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky_3/rules.mk
@@ -28,11 +28,10 @@ RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 RGB_MATRIX_DRIVER = WS2812
 
 SPLIT_KEYBOARD = yes
+LAYOUTS = split_3x5_3
 
 POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 
 SERIAL_DRIVER = vendor
 WS2812_DRIVER = vendor
-
-DEFAULT_FOLDER = bastardkb/charybdis/4x6/v2/splinky/v3
diff --git a/keyboards/bastardkb/charybdis/3x6/v2/splinky/readme.md b/keyboards/bastardkb/charybdis/3x6/v2/splinky/readme.md
deleted file mode 100644
index 22df77bbaa..0000000000
--- a/keyboards/bastardkb/charybdis/3x6/v2/splinky/readme.md
+++ /dev/null
@@ -1,6 +0,0 @@
-# Splinky controller
-
-The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
-
-See https://github.com/plut0nium/0xB2/#releases to figure out the right version
-for you (v2 and v3) supported.
diff --git a/keyboards/bastardkb/charybdis/3x6/v2/splinky/v2/rules.mk b/keyboards/bastardkb/charybdis/3x6/v2/splinky/v2/rules.mk
deleted file mode 100644
index c9c50319db..0000000000
--- a/keyboards/bastardkb/charybdis/3x6/v2/splinky/v2/rules.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.
diff --git a/keyboards/bastardkb/charybdis/3x6/v2/splinky/v3/rules.mk b/keyboards/bastardkb/charybdis/3x6/v2/splinky/v3/rules.mk
deleted file mode 100644
index c9c50319db..0000000000
--- a/keyboards/bastardkb/charybdis/3x6/v2/splinky/v3/rules.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.
diff --git a/keyboards/bastardkb/charybdis/3x6/v2/splinky_2/config.h b/keyboards/bastardkb/charybdis/3x6/v2/splinky_2/config.h
new file mode 100644
index 0000000000..3f72897c56
--- /dev/null
+++ b/keyboards/bastardkb/charybdis/3x6/v2/splinky_2/config.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP26, GP5, GP4, GP9 }
+#define MATRIX_COL_PINS \
+    { GP27, GP28, GP15, GP6, GP7, GP8 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine M