diff options
author | Legonut <legonut3@gmail.com> | 2018-02-06 23:44:10 -0500 |
---|---|---|
committer | Jack Humbert <jack.humb@gmail.com> | 2018-02-06 23:44:10 -0500 |
commit | ad01e3c03a5213a46d5e6bd14cbb3c3231f68c78 (patch) | |
tree | 790ce99ed792d643d4007a7c64357566529c35fd /keyboards | |
parent | 9cfcd494064439b0c8b31bc45969b0487ec6e81a (diff) |
New keyboard added "Zen" (#2347)
* New keyboard added
Zen is a split ortholinear currently in group buy.
* remove bad keymap
Keymap was throwing errors
* remove other bad keymap
I should have checked these before haha
* small fix to update folder name
* renamed temp
* renamed to zen
* update folder name
* Slim down matrix code
Suggested by drashna
* move KC_NO
* Update keymap
* change from rev2 to rev1
Diffstat (limited to 'keyboards')
-rw-r--r-- | keyboards/zen/config.h | 29 | ||||
-rw-r--r-- | keyboards/zen/keymaps/default/config.h | 41 | ||||
-rw-r--r-- | keyboards/zen/keymaps/default/keymap.c | 103 | ||||
-rw-r--r-- | keyboards/zen/keymaps/default/rules.mk | 6 | ||||
-rw-r--r-- | keyboards/zen/matrix.c | 466 | ||||
-rw-r--r-- | keyboards/zen/readme.md | 12 | ||||
-rw-r--r-- | keyboards/zen/rev1/config.h | 91 | ||||
-rw-r--r-- | keyboards/zen/rev1/rev1.c | 22 | ||||
-rw-r--r-- | keyboards/zen/rev1/rev1.h | 40 | ||||
-rw-r--r-- | keyboards/zen/rev1/rules.mk | 2 | ||||
-rw-r--r-- | keyboards/zen/rules.mk | 73 | ||||
-rw-r--r-- | keyboards/zen/serial.c | 228 | ||||
-rw-r--r-- | keyboards/zen/serial.h | 26 | ||||
-rw-r--r-- | keyboards/zen/split_rgb.c | 41 | ||||
-rw-r--r-- | keyboards/zen/split_rgb.h | 6 | ||||
-rw-r--r-- | keyboards/zen/split_util.c | 86 | ||||
-rw-r--r-- | keyboards/zen/split_util.h | 20 | ||||
-rw-r--r-- | keyboards/zen/zen.c | 1 | ||||
-rw-r--r-- | keyboards/zen/zen.h | 23 |
19 files changed, 1316 insertions, 0 deletions
diff --git a/keyboards/zen/config.h b/keyboards/zen/config.h new file mode 100644 index 0000000000..f8f8bbf332 --- /dev/null +++ b/keyboards/zen/config.h @@ -0,0 +1,29 @@ +/* +Copyright 2017 Danny Nguyen <danny@hexwire.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +#endif // CONFIG_H + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 16 + +#define TAPPING_TERM 100
\ No newline at end of file diff --git a/keyboards/zen/keymaps/default/config.h b/keyboards/zen/keymaps/default/config.h new file mode 100644 index 0000000000..38e4d73f0d --- /dev/null +++ b/keyboards/zen/keymaps/default/config.h @@ -0,0 +1,41 @@ +/* +Copyright 2017 Danny Nguyen <danny@hexwire.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "config_common.h" + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL +// #define USE_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 16 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +#endif diff --git a/keyboards/zen/keymaps/default/keymap.c b/keyboards/zen/keymaps/default/keymap.c new file mode 100644 index 0000000000..a955e892f4 --- /dev/null +++ b/keyboards/zen/keymaps/default/keymap.c @@ -0,0 +1,103 @@ +#include "zen.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _NAV 2 + + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + NAV, + +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------. .-----------------------------------------. + * | GESC | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |CAPS(NAV)|A | S | D | F | G | | H | J | K | L | ; | " | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------..-----+------+------+------+------+------+------| + * | Ctrl | GUI | Alt |RGBTOG| NAV |Space |Delete||Enter|Space | NAV | - | = | PGUP | PGDN | + * `------------------------------------------------''-----------------------------------------------' + */ +[_QWERTY] = KEYMAP( \ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, \ + LT(_NAV, KC_CAPS),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, MO(_NAV), KC_SPC, KC_DEL, KC_ENT, KC_SPACE, MO(_NAV), KC_MINS, KC_EQL, KC_PGUP, KC_PGDN \ +), + +/* NAV + * ,-----------------------------------------. .-----------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | |RGBSAI|RGBVAI|RGBSAD| RESET| [ | | ] | Pgup | Up | Pgdn |Insert| Home | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | |RGBHUD|RGBVAD|RGBHUI| | | | | Left | Down | Right|Delete| End | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |Shift | | | | | | | NKRO | | | Pause| Back | Next | + * |------+------+------+------+------+------+------..-----+------+------+------+------+------+------| + * | Ctrl | GUI | Alt |RGBMOD| | | || | | | | Mute | VOLUP| VOLDN| + * `------------------------------------------------''-----------------------------------------------' + */ +[_NAV] = KEYMAP( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12 , \ + KC_TRNS, RGB_SAI, RGB_VAI, RGB_SAD, RESET, KC_LBRC, KC_RBRC, KC_PGUP, KC_UP, KC_PGDN, KC_INS, KC_HOME , \ + KC_TRNS, RGB_HUD, RGB_VAD, RGB_HUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_DEL, KC_END , \ + KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MAGIC_TOGGLE_NKRO, KC_TRNS, KC_TRNS, KC_MPLY, KC_MPRV, KC_MNXT , \ + KC_LCTL, KC_LGUI, KC_LALT, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLU, KC_VOLD \ +), + +}; + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + //case COLEMAK: + //if (record->event.pressed) { + //#ifdef AUDIO_ENABLE + //PLAY_NOTE_ARRAY(tone_colemak, false, 0); + //#endif + //persistant_default_layer_set(1UL<<_COLEMAK); + //} + //return false; + //break; + } + return true; +}
\ No newline at end of file diff --git a/keyboards/zen/keymaps/default/rules.mk b/keyboards/zen/keymaps/default/rules.mk new file mode 100644 index 0000000000..22b6ec4766 --- /dev/null +++ b/keyboards/zen/keymaps/default/rules.mk @@ -0,0 +1,6 @@ +RGBLIGHT_ENABLE = yes +BACKLIGHT_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/zen/matrix.c b/keyboards/zen/matrix.c new file mode 100644 index 0000000000..12f22214e1 --- /dev/null +++ b/keyboards/zen/matrix.c @@ -0,0 +1,466 @@ +/* +Copyright 2017 Danny Nguyen <danny@keeb.io> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include "wait.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include "pro_micro.h" +#include "config.h" +#include "timer.h" +#include "backlight.h" + +#ifdef USE_I2C +# include "i2c.h" +#else // USE_SERIAL +# include "serial.h" +#endif + +#ifndef DEBOUNCING_DELAY +# define DEBOUNCING_DELAY 5 +#endif + +#if (DEBOUNCING_DELAY > 0) + static uint16_t debouncing_time; + static bool debouncing = false; +#endif + +#if (MATRIX_COLS <= 8) +# define print_matrix_header() print("\nr/c 01234567\n") +# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop(matrix[i]) +# define ROW_SHIFTER ((uint8_t)1) +#else +# error "Currently only supports 8 COLS" +#endif +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +#define ERROR_DISCONNECT_COUNT 5 + +#define SERIAL_LED_ADDR 0x00 + +#define ROWS_PER_HAND (MATRIX_ROWS/2) + +static uint8_t error_count = 0; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +#if (DIODE_DIRECTION == COL2ROW) + static void init_cols(void); + static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); + static void unselect_rows(void); + static void select_row(uint8_t row); + static void unselect_row(uint8_t row); +#elif (DIODE_DIRECTION == ROW2COL) + static void init_rows(void); + static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); + static void unselect_cols(void); + static void unselect_col(uint8_t col); + static void select_col(uint8_t col); +#endif + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + +} + +uint8_t _matrix_scan(void) +{ + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); +#if (DIODE_DIRECTION == COL2ROW) + // Set row, read cols + for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { +# if (DEBOUNCING_DELAY > 0) + bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); + + if (matrix_changed) { + debouncing = true; + debouncing_time = timer_read(); + PORTD ^= (1 << 2); + } + +# else + read_cols_on_row(matrix+offset, current_row); +# endif + + } + +#elif (DIODE_DIRECTION == ROW2COL) + // Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { +# if (DEBOUNCING_DELAY > 0) + bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); + if (matrix_changed) { + debouncing = true; + debouncing_time = timer_read(); + } +# else + read_rows_on_col(matrix+offset, current_col); +# endif + + } +#endif + +# if (DEBOUNCING_DELAY > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + debouncing = false; + } +# endif + + return 1; +} + +#ifdef USE_I2C + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); + } + matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#else // USE_SERIAL + +int serial_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + if (serial_update_buffers()) { + return 1; + } + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = serial_slave_buffer[i]; + } + +#ifdef BACKLIGHT_ENABLE + // Write backlight level for slave to read + serial_master_buffer[SERIAL_LED_ADDR] = get_backlight_level(); +#endif + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + uint8_t ret = _matrix_scan(); + +#ifdef USE_I2C + if( i2c_transaction() ) { +#else // USE_SERIAL + if( serial_transaction() ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + +#ifdef USE_I2C + for (int i = 0; i < ROWS_PER_HAND; ++i) { + i2c_slave_buffer[i] = matrix[offset+i]; + } +#else // USE_SERIAL + for (int i = 0; i < ROWS_PER_HAND; ++i) { + serial_slave_buffer[i] = matrix[offset+i]; + } + +#ifdef BACKLIGHT_ENABLE + // Read backlight level sent from master and update level on slave + backlight_set(serial_master_buffer[SERIAL_LED_ADDR]); +#endif +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +#if (DIODE_DIRECTION == COL2ROW) + +static void init_cols(void) +{ + for(uint8_t x = 0; x < MATRIX_COLS; x++) { + uint8_t pin = col_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI + } +} + +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) +{ + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[current_row]; + + // Clear data in matrix row + current_matrix[current_row] = 0; + + // Select row and wait for row selecton to stabilize + select_row(current_row); + wait_us(30); + + // For each col... + for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + + // Select the col pin to read (active low) + uint8_t pin = col_pins[col_index]; + uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF)); + + // Populate the matrix row with the state of the col pin + current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index); + } + + // Unselect row + unselect_row(current_row); + + return (last_row_value != current_matrix[current_row]); +} + +static void select_row(uint8_t row) +{ + uint8_t pin = row_pins[row]; + _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT + _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW +} + +static void unselect_row(uint8_t row) +{ + uint8_t pin = row_pins[row]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI +} + +static void unselect_rows(void) +{ + for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { + uint8_t pin = row_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI + } +} + +#elif (DIODE_DIRECTION == ROW2COL) + +static void init_rows(void) +{ + for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { + uint8_t pin = row_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI + } +} + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) +{ + bool matrix_changed = false; + + // Select col and wait for col selecton to stabilize + select_col(current_col); + wait_us(30); + + // For each row... + for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) + { + + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[row_index]; + + // Check row pin state + if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0) + { + // Pin LO, set col bit + current_matrix[row_index] |= (ROW_SHIFTER << current_col); + } + else + { + // Pin HI, clear col bit + current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); + } + + // Determine if the matrix changed state + if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) + { + matrix_changed = true; + } + } + + // Unselect col + unselect_col(current_col); + + return matrix_changed; +} + +static void select_col(uint8_t col) +{ + uint8_t pin = col_pins[col]; + _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT + _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW +} + +static void unselect_col(uint8_t col) +{ + uint8_t pin = col_pins[col]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI +} + +static void unselect_cols(void) +{ + for(uint8_t x = 0; x < MATRIX_COLS; x++) { + uint8_t pin = col_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI + } +} + +#endif diff --git a/keyboards/zen/readme.md b/keyboards/zen/readme.md new file mode 100644 index 0000000000..36c63d2933 --- /dev/null +++ b/keyboards/zen/readme.md @@ -0,0 +1,12 @@ +Zen Keyboard +==== + +A split ergo keyboard with a few goals in mind: + - Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen is only 8.0mm thick. + - Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholiniear, Atreus62, and Ergodox, this is the best layout for gaming and typing. + - RGB backlighting. 16 WS2812b LEDs shine through the perimeter switches. The SK6812 variant are cheap and easy to solder. + - Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume. + +A build guide and more info for this keyboard can be found here: [Zen Build Guide](https://legonut.gitbooks.io/zen-keyboard/content/) + +Maintained by u/legonut3
\ No newline at end of file diff --git a/keyboards/zen/rev1/config.h b/keyboards/zen/rev1/config.h new file mode 100644 index 0000000000..efae558927 --- /dev/null +++ b/keyboards/zen/rev1/config.h @@ -0,0 +1,91 @@ +/* +Copyright 2017 Danny Nguyen <danny@hexwire.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef REV1_CONFIG_H +#define REV1_CONFIG_H + +#include QMK_KEYBOARD_CONFIG_H + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xCEEB +#define PRODUCT_ID 0x1256 +#define DEVICE_VER 0x0200 +#define MANUFACTURER Legonut +#define PRODUCT Project Zen +#define DESCRIPTION Split gaming keyboard + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 10 +#define MATRIX_COLS 7 + +// wiring of each half +#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 } +#define MATRIX_COL_PINS { B2, B3, B1, F7, F6, D4, B6 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#define BACKLIGHT_PIN F4 +#define BACKLIGHT_LEVELS 5 + + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D1 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 16 // Number of LEDs +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/zen/rev1/rev1.c b/keyboards/zen/rev1/rev1.c new file mode 100644 index 0000000000..5f4cd32f69 --- /dev/null +++ b/keyboards/zen/rev1/rev1.c @@ -0,0 +1,22 @@ +#include "rev1.h" + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + diff --git a/keyboards/zen/rev1/rev1.h b/keyboards/zen/rev1/rev1.h new file mode 100644 index 0000000000..4983bb2a30 --- /dev/null +++ b/keyboards/zen/rev1/rev1.h @@ -0,0 +1,40 @@ +#ifndef REV1_H +#define REV1_H + +#include "zen.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + + +#ifdef USE_I2C +#include <stddef.h> +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/interrupt.h> +#endif +#endif + +//void promicro_bootloader_jmp(bool program); + +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k55, k54, k53, k52, k51, k50, \ + k10, k11, k12, k13, k14, k15, k65, k64, k63, k62, k61, k60, \ + k20, k21, k22, k23, k24, k25, k75, k74, k73, k72, k71, k70, \ + k30, k31, k32, k33, k34, k35, k85, k84, k83, k82, k81, k80, \ + k40, k41, k42, k43, k44, k45, k46, k96, k95, k94, k93, k92, k91, k90 \ + ) \ + { \ + { k00, k01, k02, k03, k04, k05, KC_NO }, \ + { k10, k11, k12, k13, k14, k15, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, KC_NO }, \ + { k30, k31, k32, k33, k34, k35, KC_NO }, \ + { k40, k41, k42, k43, k44, k45, k46 }, \ + { k50, k51, k52, k53, k54, k55, KC_NO }, \ + { k60, k61, k62, k63, k64, k65, KC_NO }, \ + { k70, k71, k72, k73, k74, k75, KC_NO }, \ + { k80, k81, k82, k83, k84, k85, KC_NO }, \ + { k90, k91, k92, k93, k94, k95, k96 } \ + } + +#endif diff --git a/keyboards/zen/rev1/rules.mk b/keyboards/zen/rev1/rules.mk new file mode 100644 index 0000000000..d7463419b4 --- /dev/null +++ b/keyboards/zen/rev1/rules.mk @@ -0,0 +1,2 @@ +RGBLIGHT_ENABLE = yes +BACKLIGHT_ENABLE = yes diff --git a/keyboards/zen/rules.mk b/keyboards/zen/rules.mk new file mode 100644 index 0000000000..32d3dc51c8 --- /dev/null +++ b/keyboards/zen/rules.mk @@ -0,0 +1,73 @@ +SRC += matrix.c \ + split_util.c \ + serial.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SUBPROJECT_rev1 = yes +USE_I2C = no +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during |