Keyboard: Add Lily58 Keyboard (#3893)

* add Lily58

* file fix

22 files changed, 2266 insertions, 0 deletions

diff --git a/keyboards/lily58/config.h b/keyboards/lily58/config.h
new file mode 100644
index 0000000000..db4844c910
--- /dev/null
+++ b/keyboards/lily58/config.h
@@ -0,0 +1,21 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "serial_config.h"
\ No newline at end of file
diff --git a/keyboards/lily58/i2c.c b/keyboards/lily58/i2c.c
new file mode 100644
index 0000000000..084c890c40
--- /dev/null
+++ b/keyboards/lily58/i2c.c
@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif
diff --git a/keyboards/lily58/i2c.h b/keyboards/lily58/i2c.h
new file mode 100644
index 0000000000..c15b6bc506
--- /dev/null
+++ b/keyboards/lily58/i2c.h
@@ -0,0 +1,49 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  400000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif
diff --git a/keyboards/lily58/keymaps/default/config.h b/keyboards/lily58/keymaps/default/config.h
new file mode 100644
index 0000000000..3077c94632
--- /dev/null
+++ b/keyboards/lily58/keymaps/default/config.h
@@ -0,0 +1,41 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "config.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+// Underglow
+/*
+#undef RGBLED_NUM
+#define RGBLED_NUM 14    // Number of LEDs
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_SLEEP
+*/
\ No newline at end of file
diff --git a/keyboards/lily58/keymaps/default/keymap.c b/keyboards/lily58/keymaps/default/keymap.c
new file mode 100644
index 0000000000..624ce210b1
--- /dev/null
+++ b/keyboards/lily58/keymaps/default/keymap.c
@@ -0,0 +1,155 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* QWERTY
+ * ,-----------------------------------------.                    ,-----------------------------------------.
+ * | ESC  |   1  |   2  |   3  |   4  |   5  |                    |   6  |   7  |   8  |   9  |   0  |  ~   |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |                    |   Y  |   U  |   I  |   O  |   P  |  -   |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |LCTRL |   A  |   S  |   D  |   F  |   G  |-------.    ,-------|   H  |   J  |   K  |   L  |   ;  |  '   |
+ * |------+------+------+------+------+------|   [   |    |    ]  |------+------+------+------+------+------|
+ * |LShift|   Z  |   X  |   C  |   V  |   B  |-------|    |-------|   N  |   M  |   ,  |   .  |   /  |RShift|
+ * `-----------------------------------------/       /     \      \-----------------------------------------'
+ *                   |LOWER | LGUI | Alt  | /Space  /       \Enter \  |BackSP| RGUI |RAISE |
+ *                   |      |      |      |/       /         \      \ |      |      |      |
+ *                   `-------------------''-------'           '------''--------------------'
+ */
+
+ [_QWERTY] = LAYOUT( \
+  KC_ESC,   KC_1,   KC_2,    KC_3,    KC_4,    KC_5,                     KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_GRV, \
+  KC_TAB,   KC_Q,   KC_W,    KC_E,    KC_R,    KC_T,                     KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_MINS, \
+  KC_LCTRL, KC_A,   KC_S,    KC_D,    KC_F,    KC_G,                     KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT,  KC_Z,   KC_X,    KC_C,    KC_V,    KC_B, KC_LBRC,  KC_RBRC,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, \
+                             LOWER,KC_LGUI, KC_LALT, KC_SPC,   KC_ENT,  KC_BSPC, KC_RGUI, RAISE \
+),
+/* LOWER
+ * ,-----------------------------------------.                    ,-----------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |                    |  F7  |  F8  |  F9  | F10  | F11  | F12  |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |                    |   ^  |   &  |   *  |   (  |   )  |      |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |-------.    ,-------|      |   _  |   +  |      |      |      |
+ * |------+------+------+------+------+------|   [   |    |    ]  |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |-------|    |-------|      |ISO ~ |ISO | |      |      |      |
+ * `-----------------------------------------/       /     \      \-----------------------------------------'
+ *                   |LOWER | LGUI | Alt  | /Space  /       \Enter \  |BackSP| RGUI |RAISE |
+ *                   |      |      |      |/       /         \      \ |      |      |      |
+ *                   `-------------------''-------'           '------''--------------------'
+ */
+[_LOWER] = LAYOUT( \
+  KC_F1,  KC_F2,    KC_F3,   KC_F4,   KC_F5,   KC_F6,                     KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,  \
+  _______, _______, _______, _______, _______, _______,                   _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______,S(KC_NUHS),S(KC_NUBS),_______, _______, _______,\
+                             _______, _______, _______, _______, _______,  _______, _______, _______\
+),
+/* RAISE
+ * ,-----------------------------------------.                    ,-----------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |                    |  F7  |  F8  |  F9  | F10  | F11  | F12  |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |   `  |   1  |   2  |   3  |   4  |   5  |                    |   6  |   7  |   8  |   9  |   0  |      |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |-------.    ,-------|      | Left | Down |  Up  |Right |      |
+ * |------+------+------+------+------+------|   [   |    |    ]  |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |-------|    |-------|   +  |   -  |   =  |   [  |   ]  |   \  |
+ * `-----------------------------------------/       /     \      \-----------------------------------------'
+ *                   |LOWER | LGUI | Alt  | /Space  /       \Enter \  |BackSP| RGUI |RAISE |
+ *                   |      |      |      |/       /         \      \ |      |      |      |
+ *                   `-------------------''-------'           '------''--------------------'
+ */
+
+[_RAISE] = LAYOUT( \
+  KC_F1,  KC_F2,    KC_F3,   KC_F4,   KC_F5,   KC_F6,                       KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, \
+  _______, _______, _______, _______, _______, _______,                     XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, XXXXXXX, \
+  _______, _______, _______, _______, _______, _______,  _______, _______,  KC_PLUS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+                             _______, _______, _______,  _______, _______,  _______, _______, _______ \
+),
+
+/* ADJUST (Layers for Underglow)
+ * ,-----------------------------------------.                    ,-----------------------------------------.
+ * |      |      |      |      |      |      |                    |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |                    |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |-------.    ,-------|      |      |      |      |      |      |
+ * |------+------+------+------+------+------|       |    |       |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |-------|    |-------|      |      |      |      |      |      |
+ * `-----------------------------------------/       /     \      \-----------------------------------------'
+ *                   |LOWER | LGUI | Alt  | /Space  /       \Enter \  |BackSP| RGUI |RAISE |
+ *                   |      |      |      |/       /         \      \ |      |      |      |
+ *                   `-------------------''-------'           '------''--------------------'
+ */ 
+  [_ADJUST] = LAYOUT( \
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
+                             _______, _______, _______, _______, _______,  _______, _______, _______ \
+  )
+};
+
+
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+         print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/lily58/keymaps/default/rules.mk b/keyboards/lily58/keymaps/default/rules.mk
new file mode 100644
index 0000000000..73777a1b78
--- /dev/null
+++ b/keyboards/lily58/keymaps/default/rules.mk
@@ -0,0 +1,22 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+
+OLED_ENABLE = no
+RGBLIGHT_ENABLE = no
+
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+ONEHAND_ENABLE = no        # Enable one-hand typing
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
\ No newline at end of file
diff --git a/keyboards/lily58/lily58.c b/keyboards/lily58/lily58.c
new file mode 100644
index 0000000000..697e3820c6
--- /dev/null
+++ b/keyboards/lily58/lily58.c
@@ -0,0 +1 @@
+ #include "lily58.h"
diff --git a/keyboards/lily58/lily58.h b/keyboards/lily58/lily58.h
new file mode 100644
index 0000000000..1d64dd7b2a
--- /dev/null
+++ b/keyboards/lily58/lily58.h
@@ -0,0 +1,28 @@
+#ifndef LILY58_H
+#define LILY58_H
+
+#include "quantum.h"
+
+#ifdef KEYBOARD_lily58_rev1
+    #include "rev1.h"
+#endif
+
+
+
+// Used to create a keymap using only KC_ prefixed keys
+#define LAYOUT_kc( \
+    L00, L01, L02, L03, L04, L05,           R00, R01, R02, R03, R04, R05, \
+    L10, L11, L12, L13, L14, L15,           R10, R11, R12, R13, R14, R15, \
+    L20, L21, L22, L23, L24, L25,           R20, R21, R22, R23, R24, R25, \
+    L30, L31, L32, L33, L34, L35, L45, R40, R30, R31, R32, R33, R34, R35, \
+                   L41, L42, L43, L44, R41, R42, R43, R44  \
+    ) \
+    LAYOUT( \
+        KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05,                      KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
+        KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15,                      KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
+        KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25,                      KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
+        KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L45,  KC_##R40, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, \
+                                      KC_##L41, KC_##L42, KC_##L43, KC_##L44,  KC_##R41, KC_##R42, KC_##R43, KC_##R44 \
+    )
+
+#endif
diff --git a/keyboards/lily58/matrix.c b/keyboards/lily58/matrix.c
new file mode 100644
index 0000000000..fc42dd14d9
--- /dev/null
+++ b/keyboards/lily58/matrix.c
@@ -0,0 +1,459 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+#include "timer.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else // USE_SERIAL
+#  include "serial.h"
+#endif
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#else
+#    error "Currently only supports 8 COLS"
+#endif
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#define ERROR_DISCONNECT_COUNT 5
+
+#define ROWS_PER_HAND (MATRIX_ROWS/2)
+
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    debug_enable = true;
+    debug_matrix = true;
+    debug_mouse = true;
+    // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+    unselect_rows();
+    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
+
+    TX_RX_LED_INIT;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+
+}
+
+uint8_t _matrix_scan(void)
+{
+    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+#if (DIODE_DIRECTION == COL2ROW)
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+
+#       else
+            read_cols_on_row(matrix+offset, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix+offset, current_col);
+#       endif
+
+    }
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+                matrix[i+offset] = matrix_debouncing[i+offset];
+            }
+            debouncing = false;
+        }
+#   endif
+
+    return 1;
+}
+
+#ifdef USE_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+    if (err) goto i2c_error;
+
+    // start of matrix stored at 0x00
+    err = i2c_master_write(0x00);
+    if (err) goto i2c_error;
+
+    // Start read
+    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+    if (err) goto i2c_error;
+
+    if (!err) {
+        int i;
+        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
+            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
+        }
+        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
+        i2c_master_stop();
+    } else {
+i2c_error: // the cable is disconnceted, or something else went wrong
+        i2c_reset_state();
+        return err;
+    }
+
+    return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    if (serial_update_buffers()) {
+        return 1;
+    }
+
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        matrix[slaveOffset+i] = serial_slave_buffer[i];
+    }
+    return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+    uint8_t ret = _matrix_scan();
+
+#ifdef USE_I2C
+    if( i2c_transaction() ) {
+#else // USE_SERIAL
+    if( serial_transaction() ) {
+#endif
+        // turn on the indicator led when halves are disconnected
+        TXLED1;
+
+        error_count++;
+
+        if (error_count > ERROR_DISCONNECT_COUNT) {
+            // reset other half if disconnected
+            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+            for (int i = 0; i < ROWS_PER_HAND; ++i) {
+                matrix[slaveOffset+i] = 0;
+            }
+        }
+    } else {
+        // turn off the indicator led on no error
+        TXLED0;
+        error_count = 0;
+    }
+    matrix_scan_quantum();
+    return ret;
+}
+
+void matrix_slave_scan(void) {
+    _matrix_scan();
+
+    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+#ifdef USE_I2C
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        i2c_slave_buffer[i] = matrix[offset+i];
+    }
+#else // USE_SERIAL
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_slave_buffer[i] = matrix[offset+i];
+    }
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row