Merge remote-tracking branch 'origin/master' into develop

9 files changed, 479 insertions, 0 deletions

diff --git a/keyboards/ryanskidmore/rskeys100/config.h b/keyboards/ryanskidmore/rskeys100/config.h
new file mode 100644
index 0000000000..9e036aa70d
--- /dev/null
+++ b/keyboards/ryanskidmore/rskeys100/config.h
@@ -0,0 +1,85 @@
+// Copyright 2021 Ryan Skidmore (@ryanskidmore, rskeys@ryanskidmore.co.uk)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x7273 // rs
+#define PRODUCT_ID   0x0064 // 100
+#define DEVICE_VER   0x0001 // rev 1
+#define MANUFACTURER ryanskidmore
+#define PRODUCT      rsKeys100
+
+/* Key Matrix Sizes */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 24
+
+/* Rows */
+#define ROW_A  D4
+#define ROW_B  C6
+#define ROW_C  D7
+#define ROW_D  E6
+#define ROW_E  B4
+#define ROW_F  B5
+
+/* Columns 0 - 20 (24 with dummy columns for shift registers) */
+#define SHR_LATCH B2
+#define SHR_CLOCK B3
+#define SHR_DATA  B1
+#define SHR_COLS { 0x000001, 0x000002, 0x000004, 0x000008, 0x000010, 0x000020, 0x000040, 0x000080, 0x000100, 0x000200, 0x000400, 0x000800, 0x001000, 0x002000, 0x004000, 0x008000, 0x010000, 0x020000, 0x040000, 0x080000, 0x100000, 0x200000, 0x400000, 0x800000 }
+
+/* The shift registers on the matrix PCB output a signal on each column, which passes through the
+ * switch and a diode towards the row. The row is then connected to the AVR as an input. This means
+ * the diode direction is COL(umn) to ROW */
+#define DIODE_DIRECTION COL2ROW
+
+/* RGB Data Pin */
+#define RGB_DI_PIN C7
+/* The number of RGB LEDs connected */
+#define DRIVER_LED_TOTAL 105
+/* Set the maximum brightness to 110 to avoid going over 500 mA.
+ * At full brightness with all three indicator LEDs on, the power draw is about 450 mA. */
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 110
+/* Enable framebuffer effects */
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+/* Enable the cycle left right animation and set it as the startup mode */
+#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Set the max power consumption for the keyboard, which is 500 mA. */
+#define USB_MAX_POWER_CONSUMPTION 500
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+#define FORCE_NKRO
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
\ No newline at end of file
diff --git a/keyboards/ryanskidmore/rskeys100/info.json b/keyboards/ryanskidmore/rskeys100/info.json
new file mode 100644
index 0000000000..ed9898d405
--- /dev/null
+++ b/keyboards/ryanskidmore/rskeys100/info.json
@@ -0,0 +1,121 @@
+{
+    "keyboard_name": "rskeys100",
+    "url": "",
+    "maintainer": "ryanskidmore",
+    "layouts": {
+        "LAYOUT_fullsize_iso": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6.5, "y":0},
+                {"x":7.5, "y":0},
+                {"x":8.5, "y":0},
+                {"x":9.5, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0},
+                {"x":14, "y":0},
+                {"x":15.25, "y":0},
+                {"x":16.25, "y":0},
+                {"x":17.25, "y":0},
+
+                {"x":0, "y":1.25},
+                {"x":1, "y":1.25},
+                {"x":2, "y":1.25},
+                {"x":3, "y":1.25},
+                {"x":4, "y":1.25},
+                {"x":5, "y":1.25},
+                {"x":6, "y":1.25},
+                {"x":7, "y":1.25},
+                {"x":8, "y":1.25},
+                {"x":9, "y":1.25},
+                {"x":10, "y":1.25},
+                {"x":11, "y":1.25},
+                {"x":12, "y":1.25},
+                {"x":13, "y":1.25, "w":2},
+                {"x":15.25, "y":1.25},
+                {"x":16.25, "y":1.25},
+                {"x":17.25, "y":1.25},
+                {"x":18.5, "y":1.25},
+                {"x":19.5, "y":1.25},
+                {"x":20.5, "y":1.25},
+                {"x":21.5, "y":1.25},
+
+                {"x":0, "y":2.25, "w":1.5},
+                {"x":1.5, "y":2.25},
+                {"x":2.5, "y":2.25},
+                {"x":3.5, "y":2.25},
+                {"x":4.5, "y":2.25},
+                {"x":5.5, "y":2.25},
+                {"x":6.5, "y":2.25},
+                {"x":7.5, "y":2.25},
+                {"x":8.5, "y":2.25},
+                {"x":9.5, "y":2.25},
+                {"x":10.5, "y":2.25},
+                {"x":11.5, "y":2.25},
+                {"x":12.5, "y":2.25},
+                {"x":15.25, "y":2.25},
+                {"x":16.25, "y":2.25},
+                {"x":17.25, "y":2.25},
+                {"x":18.5, "y":2.25},
+                {"x":19.5, "y":2.25},
+                {"x":20.5, "y":2.25},
+                {"x":21.5, "y":2.25, "h": 2},
+
+                {"x":0, "y":3.25, "w":1.75},
+                {"x":1.75, "y":3.25},
+                {"x":2.75, "y":3.25},
+                {"x":3.75, "y":3.25},
+                {"x":4.75, "y":3.25},
+                {"x":5.75, "y":3.25},
+                {"x":6.75, "y":3.25},
+                {"x":7.75, "y":3.25},
+                {"x":8.75, "y":3.25},
+                {"x":9.75, "y":3.25},
+                {"x":10.75, "y":3.25},
+                {"x":11.75, "y":3.25},
+                {"x":12.75, "y":3.25},
+                {"x":13.75, "y":2.25, "w":1.25, "h":2},
+                {"x":18.5, "y":3.25},
+                {"x":19.5, "y":3.25},
+                {"x":20.5, "y":3.25},
+
+                {"x":0, "y":4.25, "w":1.25},
+                {"x":1.25, "y":4.25},
+                {"x":2.25, "y":4.25},
+                {"x":3.25, "y":4.25},
+                {"x":4.25, "y":4.25},
+                {"x":5.25, "y":4.25},
+                {"x":6.25, "y":4.25},
+                {"x":7.25, "y":4.25},
+                {"x":8.25, "y":4.25},
+                {"x":9.25, "y":4.25},
+                {"x":10.25, "y":4.25},
+                {"x":11.25, "y":4.25},
+                {"x":12.25, "y":4.25, "w":2.75},
+                {"x":16.25, "y":4.25},
+                {"x":18.5, "y":4.25},
+                {"x":19.5, "y":4.25},
+                {"x":20.5, "y":4.25},
+                {"x":21.5, "y":4.25, "h":2},
+
+                {"x":0, "y":5.25, "w":1.25},
+                {"x":1.25, "y":5.25, "w":1.25},
+                {"x":2.5, "y":5.25, "w":1.25},
+                {"x":3.75, "y":5.25, "w":6.25},
+                {"x":10, "y":5.25, "w":1.25},
+                {"x":11.25, "y":5.25, "w":1.25},
+                {"x":12.5, "y":5.25, "w":1.25},
+                {"x":13.75, "y":5.25, "w":1.25},
+                {"x":15.25, "y":5.25},
+                {"x":16.25, "y":5.25},
+                {"x":17.25, "y":5.25},
+                {"x":18.5, "y":5.25, "w":2},
+                {"x":20.5, "y":5.25}
+            ]
+        }
+    }
+}
diff --git a/keyboards/ryanskidmore/rskeys100/keymaps/default/keymap.c b/keyboards/ryanskidmore/rskeys100/keymaps/default/keymap.c
new file mode 100644
index 0000000000..37f2589760
--- /dev/null
+++ b/keyboards/ryanskidmore/rskeys100/keymaps/default/keymap.c
@@ -0,0 +1,65 @@
+// Copyright 2021 Ryan Skidmore (@ryanskidmore, rskeys@ryanskidmore.co.uk)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /*
+     * ┌───┐   ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐
+     * │Esc│   │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Scr│Pse│
+     * └───┘   └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐
+     * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ │Ins│Hom│PgU│ │Num│ / │ * │ - │
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤
+     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │     │ │Del│End│PgD│ │ 7 │ 8 │ 9 │   │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ Ent│ └───┴───┴───┘ ├───┼───┼───┤ + │
+     * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │    │               │ 4 │ 5 │ 6 │   │
+     * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤     ┌───┐     ├───┼───┼───┼───┤
+     * │Shft│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │    Shift │     │ ↑ │     │ 1 │ 2 │ 3 │   │
+     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤Ent│
+     * │Ctrl│GUI │Alt │                        │ Alt│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ │   0   │ . │   │
+     * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘
+     */
+    /* Default Layer */
+    [0] = LAYOUT_fullsize_iso(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  LT(1, KC_F12),       KC_PSCR, KC_SLCK, KC_PAUS,
+
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,    KC_INS,  KC_HOME, KC_PGUP,    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_ENT,     KC_DEL,  KC_END,  KC_PGDN,    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,                                           KC_P4,   KC_P5,   KC_P6,
+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,             KC_UP,               KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, KC_APP,  KC_RCTL,    KC_LEFT, KC_DOWN, KC_RGHT,    KC_P0,            KC_PDOT
+    ),
+    /* RGB Control Layer */
+    [1] = LAYOUT_fullsize_iso(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,             _______, _______, _______,
+
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______, _______, _______,    _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______, _______, _______,    _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                                           _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,             RGB_VAI,             _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______,    _______, RGB_VAD, _______,    _______,            _______
+        ),
+};
+
+void keyboard_post_init_user(void) {
+    rgb_matrix_enable_noeeprom();
+}
+
+void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
+    /* We use RGB for the indicator RGB colours since we don't need to adjust the brightness.
+     * If any of the indicators are enabled, set the key to white. This overrides the active RGB
+     * matrix animation. */
+
+    if (host_keyboard_led_state().caps_lock) {
+        RGB_MATRIX_INDICATOR_SET_COLOR(73, 255, 255, 255);
+    }
+
+    if (host_keyboard_led_state().num_lock) {
+        RGB_MATRIX_INDICATOR_SET_COLOR(19, 255, 255, 255);
+    }
+
+    if (host_keyboard_led_state().scroll_lock) {
+        RGB_MATRIX_INDICATOR_SET_COLOR(14, 255, 255, 255);
+    }
+}
\ No newline at end of file
diff --git a/keyboards/ryanskidmore/rskeys100/keymaps/default/readme.md b/keyboards/ryanskidmore/rskeys100/keymaps/default/readme.md
new file mode 100644
index 0000000000..03357c206b
--- /dev/null
+++ b/keyboards/ryanskidmore/rskeys100/keymaps/default/readme.md
@@ -0,0 +1 @@
+This is the default keymap (UK, ISO) for the rskeys100. The RGB control layer can be activated by holding the F12 key.
\ No newline at end of file
diff --git a/keyboards/ryanskidmore/rskeys100/matrix.c b/keyboards/ryanskidmore/rskeys100/matrix.c
new file mode 100644
index 0000000000..faefb29c84
--- /dev/null
+++ b/keyboards/ryanskidmore/rskeys100/matrix.c
@@ -0,0 +1,110 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+Modified by Ryan Skidmore <rskeys@ryanskidmore.co.uk> (@ryanskidmore)
+to support the rskeys100.
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdbool.h>
+#include "matrix.h"
+#include <util/delay.h>
+#include "quantum.h"
+
+static const uint32_t col_values[24] = SHR_COLS;
+
+static uint8_t read_rows(void);
+static void    select_col(uint8_t col);
+
+static void    shift_pulse(void);
+static void    shift_out_single(uint8_t value);
+static void    shift_out(uint32_t value);
+
+void matrix_init_custom(void) {
+  setPinInput(ROW_A);
+  setPinInput(ROW_B);
+  setPinInput(ROW_C);
+  setPinInput(ROW_D);
+  setPinInput(ROW_E);
+  setPinInput(ROW_F);
+
+  setPinOutput(SHR_DATA);
+  setPinOutput(SHR_LATCH);
+  setPinOutput(SHR_CLOCK);
+}
+
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+    bool changed = false;
+
+    for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+        select_col(col);
+        _delay_us(1);
+        uint8_t rows = read_rows();
+        for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+            bool prev_bit = ((uint32_t)(current_matrix[row]) & (matrix_row_t)(1UL << col)) ? 1 : 0;
+            bool curr_bit = ((uint32_t)rows & (uint32_t)(1UL << row)) ? 1 : 0;
+            if (prev_bit != curr_bit) {
+                current_matrix[row] = (uint32_t)(current_matrix[row]) ^ (uint32_t)(1UL << col);
+                changed = true;
+            }
+        }
+    }
+
+    return changed;
+}
+
+static uint8_t read_rows(void) {
+  return (readPin(ROW_F) << 5)
+         | (readPin(ROW_E) << 4)
+         | (readPin(ROW_D) << 3)
+         | (readPin(ROW_C) << 2)
+         | (readPin(ROW_B) << 1)
+         | (readPin(ROW_A) );
+}
+
+static void select_col(uint8_t col) {
+    shift_out(col_values[col]);
+}
+
+static void shift_out(uint32_t value) {
+  writePinLow(SHR_LATCH);
+  uint8_t first_byte  = (value >> 16) & 0xFF;
+  uint8_t second_byte  = (value >> 8) & 0xFF;
+  uint8_t third_byte = (uint8_t)(value & 0xFF);
+
+  shift_out_single(first_byte);
+  shift_out_single(second_byte);
+  shift_out_single(third_byte);
+  writePinHigh(SHR_LATCH);
+  /* We delay here to prevent multiple consecutive keys being triggered with a single switch press */
+  _delay_us(10);
+}
+
+static void shift_out_single(uint8_t value) {
+    for (uint8_t i = 0; i < 8; i++) {
+        if (value & 0b10000000) {
+            writePinHigh(SHR_DATA);
+        } else {
+            writePinLow(SHR_DATA);
+        }
+
+        shift_pulse();
+        value = value << 1;
+    }
+}
+
+static inline void shift_pulse(void) {
+    writePinHigh(SHR_CLOCK);
+    writePinLow(SHR_CLOCK);
+}
\ No newline at end of file
diff --git a/keyboards/ryanskidmore/rskeys100/readme.md b/keyboards/ryanskidmore/rskeys100/readme.md
new file mode 100644
index 0000000000..4be465dbde
--- /dev/null
+++ b/keyboards/ryanskidmore/rskeys100/readme.md
@@ -0,0 +1,22 @@
+# rskeys100
+
+The rskeys100 is a full size, 100% ISO keyboard with per-key RGB. 
+
+* Keyboard Maintainer: [Ryan Skidmore](https://github.com/ryanskidmore)
+* Hardware Supported: The rskeys100 matrix PCB is the only supported PCB for the switch matrix. This PCB works with any
+Pro Micro or Pro Micro alternative as the daughterboard.
+* Hardware Availability: Coming soon
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ryanskidmore/rskeys100:default
+
+Flashing example for this keyboard:
+
+    make ryanskidmore/rskeys100:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+To enter the bootloader, press the `RESET` button on your daughterboard PCB while it's plugged in.
\ No newline at end of file
diff --git a/keyboards/ryanskidmore/rskeys100/rskeys100.c b/keyboards/ryanskidmore/rskeys100/rskeys100.c
new file mode 100644
index 0000000000..ec98ae62cc
--- /dev/null
+++ b/keyboards/ryanskidmore/rskeys100/rskeys100.c
@@ -0,0 +1,30 @@
+// Copyright 2021 Ryan Skidmore (@ryanskidmore, rskeys@ryanskidmore.co.uk)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "rskeys100.h"
+
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+         {     0,     1,     2,     3,     4,     5,     6,     7,     8,     9,    10,    11,    12,NO_LED,    14,    15,    16,NO_LED,NO_LED,NO_LED,NO_LED},
+         {    37,    36,    35,    34,    33,    32,    31,    30,    29,    28,    27,    26,    24,    24,    23,    22,    21,    20,    19,    18,    17},
+         {    40,    41,    42,    43,    44,    45,    46,    47,    48,    49,    50,    51,    52,    53,    54,    55,    56,    57,    58,    59,    60},
+         {    78,    77,    76,    75,    74,    73,    72,    71,    70,    69,    68,    67,    66,NO_LED,NO_LED,NO_LED,NO_LED,    64,    63,    62,NO_LED},
+         {    79,    80,    81,    82,    83,    84,    85,    86,    87,    88,    89,    90,    91,NO_LED,NO_LED,    93,NO_LED,    94,    95,    96,    97},
+         {   117,NO_LED,   116,   115,NO_LED,NO_LED,   112,NO_LED,NO_LED,NO_LED,   109,   108,   107,   106,   105,   103,   102,   101,NO_LED,    99,NO_LED}
+     }, {
+         {0, 0}, {21, 0}, {32, 0}, {43, 0}, {53, 0}, {64, 0}, {75, 0}, {85, 0}, {96, 0}, {117, 0}, {128, 0}, {139, 0}, {149, 0}, {160, 0}, {171, 0}, {181, 0},
+         {0, 13}, {11, 13}, {21, 13}, {32, 13}, {42, 13}, {53, 13}, {64, 13}, {75, 13}, {85, 13}, {96, 13}, {107, 13}, {117, 13}, {128, 13}, {139, 13}, {160, 13}, {171, 13}, {181, 13}, {192, 13}, {203, 13}, {213, 13}, {224, 13},
+         {0, 26}, {11, 26}, {21, 26}, {32, 26}, {42, 26}, {53, 26}, {64, 26}, {75, 26}, {85, 26}, {96, 26}, {107, 26}, {117, 26}, {128, 26}, {149, 26}, {160, 26}, {171, 26}, {181, 26}, {192, 26}, {203, 26}, {213, 26}, {224, 26},
+         {0, 38}, {11, 38}, {21, 38}, {32, 38}, {42, 38}, {53, 38}, {64, 38}, {75, 38}, {85, 38}, {96, 38}, {117, 38}, {128, 38}, {149, 38}, {192, 38}, {203, 38}, {213, 38},
+         {0, 51}, {11, 51}, {21, 51}, {32, 51}, {42, 51}, {53, 51}, {64, 51}, {75, 51}, {85, 51}, {96, 51}, {107, 51}, {117, 51}, {139, 51}, {171, 51}, {192, 51}, {203, 51}, {213, 51}, {224, 51},
+         {0, 64}, {11, 64}, {21, 64}, {64, 64}, {107, 64}, {117, 64}, {128, 64}, {149, 64}, {160, 64}, {171, 64}, {181, 64}, {192, 64}, {213, 64}
+     }, {
+         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4
+     } };
+#endif
\ No newline at end of file
diff --git a/keyboards/ryanskidmore/rskeys100/rskeys100.h b/keyboards/ryanskidmore/rskeys100/rskeys100.h
new file mode 100644
index 0000000000..d297440065
--- /dev/null
+++ b/keyboards/ryanskidmore/rskeys100/rskeys100.h
@@ -0,0 +1,22 @@
+// Copyright 2021 Ryan Skidmore (@ryanskidmore, rskeys@ryanskidmore.co.uk)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_fullsize_iso( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, K015, K016, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, K120, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, K220, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,                         K317, K318, K319, \
+	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411,       K413,       K415,       K417, K418, K419, K420, \
+	K500,       K502, K503,             K506,                   K510, K511, K512, K513, K514, K515, K516, K517,       K519 \
+) { \
+    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  KC_NO, K014,  K015,  K016,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115,  K116,  K117,  K118,  K119,  K120,  KC_NO, KC_NO, KC_NO }, \
+    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214,  K215,  K216,  K217,  K218,  K219,  K220,  KC_NO, KC_NO, KC_NO }, \
+    { K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO, KC_NO, KC_NO, KC_NO, K317,  K318,  K319,  KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { K400,  K401,  K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  KC_NO, K413,  KC_NO, K415,  KC_NO, K417,  K418,  K419,  K420,  KC_NO, KC_NO, KC_NO }, \
+    { K500,  KC_NO, K502,  K503,  KC_NO, KC_NO, K506,  KC_NO, KC_NO, KC_NO, K510,  K511,  K512,  K513,  K514,  K515,  K516,  K517,  KC_NO, K519,  KC_NO, KC_NO, KC_NO, KC_NO }  \
+}
diff --git a/keyboards/ryanskidmore/rskeys100/rules.mk b/keyboards/ryanskidmore/rskeys100/rules.mk
new file mode 100644
index 0000000000..62e3f42784
--- /dev/null
+++ b/keyboards/ryanskidmore/rskeys100/rules.mk
@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes       # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no         # Mouse keys
+EXTRAKEY_ENABLE = no         # Audio control and System control
+CONSOLE_ENABLE = no          # Console for debug
+COMMAND_ENABLE = yes          # Commands for debug and configuration
+NKRO_ENABLE = yes            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no        # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no         # Enable keyboard RGB underglow
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
+AUDIO_ENABLE = no            # Audio output
+CUSTOM_MATRIX = lite
+
+SRC += matrix.c
\ No newline at end of file