[Keyboard] Rename ymdk_np21 to np21, move to ymdk vendor folder (#15641)

1 files changed, 141 insertions, 0 deletions

diff --git a/keyboards/ymdk/np21/config.h b/keyboards/ymdk/np21/config.h
new file mode 100644
index 0000000000..83423792b0
--- /dev/null
+++ b/keyboards/ymdk/np21/config.h
@@ -0,0 +1,141 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x594D // "YM"
+#define PRODUCT_ID   0x5021 // "P" 21
+#define DEVICE_VER   0x0200
+#define MANUFACTURER YMDK
+#define PRODUCT      NP21
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5 }
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define LED_NUM_LOCK_PIN D0
+
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 12
+#define BACKLIGHT_BREATHING
+
+#define RGBLED_NUM 5
+//#define RGBLIGHT_HUE_STEP 8
+//#define RGBLIGHT_SAT_STEP 8
+//#define RGBLIGHT_VAL_STEP 8
+//#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//#define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+#define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//#define RGBLIGHT_EFFECT_BREATHING
+//#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#define RGBLIGHT_EFFECT_SNAKE
+//#define RGBLIGHT_EFFECT_KNIGHT
+//#define RGBLIGHT_EFFECT_CHRISTMAS
+//#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#define RGBLIGHT_EFFECT_RGB_TEST
+//#define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
+
+#define USB_MAX_POWER_CONSUMPTION 100