Merge upstream master to 2022 Q4 breaking change

1 files changed, 0 insertions, 223 deletions

diff --git a/keyboards/wilba_tech/wt_main.c b/keyboards/wilba_tech/wt_main.c
deleted file mode 100644
index 3f89066a6c..0000000000
--- a/keyboards/wilba_tech/wt_main.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "quantum.h"
-
-// Check that no backlight functions are called
-#if RGB_BACKLIGHT_ENABLED
-#include "keyboards/wilba_tech/wt_rgb_backlight.h"
-#endif // RGB_BACKLIGHT_ENABLED
-#if MONO_BACKLIGHT_ENABLED
-#include "keyboards/wilba_tech/wt_mono_backlight.h"
-#endif // MONO_BACKLIGHT_ENABLED
-
-#include "via.h"
-
-#ifndef VIA_ENABLE
-#include "eeprom.h"
-#include "version.h" // for QMK_BUILDDATE used in EEPROM magic
-#endif
-
-// Called from via_init() if VIA_ENABLE
-// Called from matrix_init_kb() if not VIA_ENABLE
-void via_init_kb(void)
-{
-    // This checks both an EEPROM reset (from bootmagic lite, keycodes)
-    // and also firmware build date (from via_eeprom_is_valid())
-    if (eeconfig_is_enabled()) {
-#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-        backlight_config_load();
-#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-    } else	{
-#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-        // If the EEPROM has not been saved before, or is out of date,
-        // save the default values to the EEPROM. Default values
-        // come from construction of the backlight_config instance.
-        backlight_config_save();
-#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-
-        // DO NOT set EEPROM valid here, let caller do this
-    }
-
-#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-    // Initialize LED drivers for backlight.
-    backlight_init_drivers();
-
-    backlight_timer_init();
-    backlight_timer_enable();
-#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-}
-
-void matrix_init_kb(void)
-{
-    // If VIA is disabled, we still need to load backlight settings.
-    // Call via_init_kb() the same way as via_init(), with setting
-    // EEPROM valid afterwards.
-#ifndef VIA_ENABLE
-    via_init_kb();
-    via_eeprom_set_valid(true);
-#endif // VIA_ENABLE
-
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void)
-{
-#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-    // This only updates the LED driver buffers if something has changed.
-    backlight_update_pwm_buffers();
-#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record)
-{
-#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-    process_record_backlight(keycode, record);
-#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-
-    switch (keycode) {
-        case FN_MO13:
-            if (record->event.pressed) {
-                layer_on(1);
-                update_tri_layer(1, 2, 3);
-            } else {
-                layer_off(1);
-                update_tri_layer(1, 2, 3);
-            }
-            return false;
-            break;
-        case FN_MO23:
-            if (record->event.pressed) {
-                layer_on(2);
-                update_tri_layer(1, 2, 3);
-            } else {
-                layer_off(2);
-                update_tri_layer(1, 2, 3);
-            }
-            return false;
-            break;
-    }
-
-    return process_record_user(keycode, record);
-}
-
-void suspend_power_down_kb(void)
-{
-#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-    backlight_set_suspend_state(true);
-#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-}
-
-void suspend_wakeup_init_kb(void)
-{
-#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-    backlight_set_suspend_state(false);
-#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-}
-
-// Moving this to the bottom of this source file is a workaround
-// for an intermittent compiler error for Atmel compiler.
-#ifdef VIA_ENABLE
-void via_custom_value_command_kb(uint8_t *data, uint8_t length) {
-    uint8_t *command_id        = &(data[0]);
-    uint8_t *channel_id        = &(data[1]);
-    uint8_t *value_id_and_data = &(data[2]);
-
-#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-    if ( *channel_id == id_custom_channel ) {
-        switch ( *command_id )
-        {
-            case id_custom_set_value:
-            {
-                backlight_config_set_value(value_id_and_data);
-                break;
-            }
-            case id_custom_get_value:
-            {
-                backlight_config_get_value(value_id_and_data);
-                break;
-            }
-            case id_custom_save:
-            {
-                backlight_config_save();
-                break;
-            }
-            default:
-            {
-                // Unhandled message.
-                *command_id = id_unhandled;
-                break;
-            }
-        }
-        return;
-    }
-#else
-        *command_id = id_unhandled;
-        *channel_id = *channel_id; // force use of variable
-        *value_id_and_data = *value_id_and_data; // force use of variable
-#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
-
-    // DO NOT call raw_hid_send(data,length) here, let caller do this
-}
-#endif // VIA_ENABLE
-
-//
-// In the case of VIA being disabled, we still need to check if
-// keyboard level EEPROM memory is valid before loading.
-// Thus these are copies of the same functions in VIA, since
-// the backlight settings reuse VIA's EEPROM magic/version,
-// and the ones in via.c won't be compiled in.
-//
-// Yes, this is sub-optimal, and is only here for completeness
-// (i.e. catering to the 1% of people that want wilba.tech LED bling
-// AND want persistent settings BUT DON'T want to use dynamic keymaps/VIA).
-//
-#ifndef VIA_ENABLE
-
-bool via_eeprom_is_valid(void)
-{
-    char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
-    uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3]  & 0x0F );
-    uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6]  & 0x0F );
-    uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9]  & 0x0F );
-
-    return (eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0 ) == magic0 &&
-            eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1 ) == magic1 &&
-            eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2 ) == magic2 );
-}
-
-void via_eeprom_set_valid(bool valid)
-{
-    char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
-    uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3]  & 0x0F );
-    uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6]  & 0x0F );
-    uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9]  & 0x0F );
-
-    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0, valid ? magic0 : 0xFF);
-    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1, valid ? magic1 : 0xFF);
-    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2, valid ? magic2 : 0xFF);
-}
-
-void via_eeprom_reset(void)
-{
-    // Set the VIA specific EEPROM state as invalid.
-    via_eeprom_set_valid(false);
-    // Set the TMK/QMK EEPROM state as invalid.
-    eeconfig_disable();
-}
-
-#endif // VIA_ENABLE