From a336c2c5005251e4cb0f3a62ccabdb4cfccad915 Mon Sep 17 00:00:00 2001 From: lokher Date: Tue, 6 Dec 2022 17:10:48 +0800 Subject: Merge upstream master to 2022 Q4 breaking change --- keyboards/wilba_tech/wt_main.c | 223 ----------------------------------------- 1 file changed, 223 deletions(-) delete mode 100644 keyboards/wilba_tech/wt_main.c (limited to 'keyboards/wilba_tech/wt_main.c') diff --git a/keyboards/wilba_tech/wt_main.c b/keyboards/wilba_tech/wt_main.c deleted file mode 100644 index 3f89066a6c..0000000000 --- a/keyboards/wilba_tech/wt_main.c +++ /dev/null @@ -1,223 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "quantum.h" - -// Check that no backlight functions are called -#if RGB_BACKLIGHT_ENABLED -#include "keyboards/wilba_tech/wt_rgb_backlight.h" -#endif // RGB_BACKLIGHT_ENABLED -#if MONO_BACKLIGHT_ENABLED -#include "keyboards/wilba_tech/wt_mono_backlight.h" -#endif // MONO_BACKLIGHT_ENABLED - -#include "via.h" - -#ifndef VIA_ENABLE -#include "eeprom.h" -#include "version.h" // for QMK_BUILDDATE used in EEPROM magic -#endif - -// Called from via_init() if VIA_ENABLE -// Called from matrix_init_kb() if not VIA_ENABLE -void via_init_kb(void) -{ - // This checks both an EEPROM reset (from bootmagic lite, keycodes) - // and also firmware build date (from via_eeprom_is_valid()) - if (eeconfig_is_enabled()) { -#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED - backlight_config_load(); -#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED - } else { -#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED - // If the EEPROM has not been saved before, or is out of date, - // save the default values to the EEPROM. Default values - // come from construction of the backlight_config instance. - backlight_config_save(); -#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED - - // DO NOT set EEPROM valid here, let caller do this - } - -#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED - // Initialize LED drivers for backlight. - backlight_init_drivers(); - - backlight_timer_init(); - backlight_timer_enable(); -#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED -} - -void matrix_init_kb(void) -{ - // If VIA is disabled, we still need to load backlight settings. - // Call via_init_kb() the same way as via_init(), with setting - // EEPROM valid afterwards. -#ifndef VIA_ENABLE - via_init_kb(); - via_eeprom_set_valid(true); -#endif // VIA_ENABLE - - matrix_init_user(); -} - -void matrix_scan_kb(void) -{ -#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED - // This only updates the LED driver buffers if something has changed. - backlight_update_pwm_buffers(); -#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) -{ -#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED - process_record_backlight(keycode, record); -#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED - - switch (keycode) { - case FN_MO13: - if (record->event.pressed) { - layer_on(1); - update_tri_layer(1, 2, 3); - } else { - layer_off(1); - update_tri_layer(1, 2, 3); - } - return false; - break; - case FN_MO23: - if (record->event.pressed) { - layer_on(2); - update_tri_layer(1, 2, 3); - } else { - layer_off(2); - update_tri_layer(1, 2, 3); - } - return false; - break; - } - - return process_record_user(keycode, record); -} - -void suspend_power_down_kb(void) -{ -#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED - backlight_set_suspend_state(true); -#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED -} - -void suspend_wakeup_init_kb(void) -{ -#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED - backlight_set_suspend_state(false); -#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED -} - -// Moving this to the bottom of this source file is a workaround -// for an intermittent compiler error for Atmel compiler. -#ifdef VIA_ENABLE -void via_custom_value_command_kb(uint8_t *data, uint8_t length) { - uint8_t *command_id = &(data[0]); - uint8_t *channel_id = &(data[1]); - uint8_t *value_id_and_data = &(data[2]); - -#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED - if ( *channel_id == id_custom_channel ) { - switch ( *command_id ) - { - case id_custom_set_value: - { - backlight_config_set_value(value_id_and_data); - break; - } - case id_custom_get_value: - { - backlight_config_get_value(value_id_and_data); - break; - } - case id_custom_save: - { - backlight_config_save(); - break; - } - default: - { - // Unhandled message. - *command_id = id_unhandled; - break; - } - } - return; - } -#else - *command_id = id_unhandled; - *channel_id = *channel_id; // force use of variable - *value_id_and_data = *value_id_and_data; // force use of variable -#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED - - // DO NOT call raw_hid_send(data,length) here, let caller do this -} -#endif // VIA_ENABLE - -// -// In the case of VIA being disabled, we still need to check if -// keyboard level EEPROM memory is valid before loading. -// Thus these are copies of the same functions in VIA, since -// the backlight settings reuse VIA's EEPROM magic/version, -// and the ones in via.c won't be compiled in. -// -// Yes, this is sub-optimal, and is only here for completeness -// (i.e. catering to the 1% of people that want wilba.tech LED bling -// AND want persistent settings BUT DON'T want to use dynamic keymaps/VIA). -// -#ifndef VIA_ENABLE - -bool via_eeprom_is_valid(void) -{ - char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54" - uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3] & 0x0F ); - uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6] & 0x0F ); - uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9] & 0x0F ); - - return (eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0 ) == magic0 && - eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1 ) == magic1 && - eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2 ) == magic2 ); -} - -void via_eeprom_set_valid(bool valid) -{ - char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54" - uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3] & 0x0F ); - uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6] & 0x0F ); - uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9] & 0x0F ); - - eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0, valid ? magic0 : 0xFF); - eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1, valid ? magic1 : 0xFF); - eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2, valid ? magic2 : 0xFF); -} - -void via_eeprom_reset(void) -{ - // Set the VIA specific EEPROM state as invalid. - via_eeprom_set_valid(false); - // Set the TMK/QMK EEPROM state as invalid. - eeconfig_disable(); -} - -#endif // VIA_ENABLE -- cgit v1.2.3 [cgit] Unable to lock slot /tmp/cgit/48100000.lock: No such file or directory (2)