Merge upstream master to 2022 Q4 breaking change

1 files changed, 0 insertions, 111 deletions

diff --git a/keyboards/system76/launch_1/config.h b/keyboards/system76/launch_1/config.h
deleted file mode 100644
index 0431b9ab17..0000000000
--- a/keyboards/system76/launch_1/config.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- *  Copyright (C) 2021  System76
- *
- *  This program is free software: you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation, either version 3 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "config_common.h"
-
-// Key matrix size
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 14
-
-/*
- * Key matrix pins
- * ROWS: AVR pins used for rows, top to bottom
- * COLS: AVR pins used for columns, left to right
- */
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { D7, C7, C6, B6, B5, B4, D6, D4, E6, D5, D3, D2, B7, B0 }
-
-/*
- * Diode Direction
- * COL2ROW = COL => Anode (+), ROW => Cathode (-)
- * ROW2COL = ROW => Anode (+), COL => Cathode (-)
- */
-#define DIODE_DIRECTION COL2ROW
-
-// Set 0 if debouncing isn't needed
-#define DEBOUNCE 5
-
-#ifdef RGB_MATRIX_ENABLE
-#    define RGB_DI_PIN E2
-#    define RGB_MATRIX_LED_COUNT 84
-#    define RGB_MATRIX_KEYPRESSES                                      // Reacts to keypresses
-// #    define RGB_MATRIX_KEYRELEASES                                     // Reacts to keyreleases (instead of keypresses)
-// #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS                             // Enables framebuffer effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED                             // Turns off effects when suspended
-// Limit brightness to support USB-A at 0.5 A
-// TODO: Do this dynamically based on power source
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 176                          // Limits maximum brightness of LEDs to 176 out of 255. If not defined, maximum brightness is set to 255
-#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_RAINBOW_MOVING_CHEVRON  // Sets the default mode, if none has been set
-#    define RGB_MATRIX_DEFAULT_HUE 142                                 // Sets the default hue value, if none has been set
-#    define RGB_MATRIX_DEFAULT_SAT 255                                 // Sets the default saturation value, if none has been set
-#    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS       // Sets the default brightness value, if none has been set
-#    define RGB_MATRIX_DEFAULT_SPD 127                                 // Sets the default animation speed, if none has been set
-#    define RGB_MATRIX_DISABLE_KEYCODES                                // Disables control of rgb matrix by keycodes (must use code functions to control the feature)
-
-#    define ENABLE_RGB_MATRIX_CYCLE_ALL
-#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
-#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
-#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
-#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
-#    define ENABLE_RGB_MATRIX_RAINDROPS
-#    define ENABLE_RGB_MATRIX_SPLASH
-#    define ENABLE_RGB_MATRIX_MULTISPLASH
-#endif  // RGB_MATRIX_ENABLE
-
-// Mechanical locking support; use KC_LCAP, KC_LNUM, or KC_LSCR instead in keymap
-#define LOCKING_SUPPORT_ENABLE
-
-// Locking resynchronize hack
-#define LOCKING_RESYNC_ENABLE
-
-// I2C {
-#define F_SCL 100000UL // Run I2C bus at 100 kHz
-#define I2C_START_RETRY_COUNT 20
-#define I2C_TIMEOUT 100 // milliseconds
-// } I2C
-
-// EEPROM {
-#define EEPROM_SIZE 1024
-// TODO: Refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x76EC
-#define EEPROM_MAGIC_ADDR 64
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x02
-#define EEPROM_VERSION_ADDR (EEPROM_MAGIC_ADDR + 2)
-// } EEPROM
-
-// Dynamic keymap {
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-#define DYNAMIC_KEYMAP_MACRO_COUNT 0
-// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR (EEPROM_VERSION_ADDR + 1)
-// Dynamic macro starts after dynamic keymaps, it is disabled
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR (DYNAMIC_KEYMAP_EEPROM_ADDR + (DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2))
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 0
-// } Dynamic keymap
-
-// System76 EC {
-#define SYSTEM76_EC_EEPROM_ADDR (DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE)
-#define SYSTEM76_EC_EEPROM_SIZE (EEPROM_SIZE - SYSTEM76_EC_EEPROM_ADDR)
-// } System76 EC